KYT R2R Helmet Max Version Augusto Fernández Replica Matte 2022 Y6R20003
Prices for Germany include VAT · Shipping calculated at checkout
Inside the EU — no customs duties will apply.
Questions? Just reach out — our team will help you right away.
Size chart KYT KX-1/TT-Revo/R1R-Racing/R2R/NZ-Race
| Size | Head circumference (cm) | Head circumference (inch) |
|---|---|---|
| XS | 53–54 cm | 20.9–21.3 in |
| S | 55–56 cm | 21.7–22.0 in |
| M | 57–58 cm | 22.4–22.8 in |
| L | 59–60 cm | 23.2–23.6 in |
| XL | 61–62 cm | 24.0–24.4 in |
| XXL | 63–64 cm | 24.8–25.2 in |
How to measure your helmet size correctly: To find the right helmet size, measure your head circumference with a flexible tape measure.
It is important that the tape measure runs around the widest part of the head – only then will you get a correct result.
Place the tape measure at the front, about 1–2 cm above the eyebrows, and run it along the sides above the ears.
At the back, the tape must run over the largest part of the back of the head (not too low on the neck). The tape may run slightly at an angle – what matters is that it sits all the way around the largest points of the head.
Make sure the tape measure sits snugly but does not dig in. Measure 2–3 times for the most accurate result. You can then compare the measured value in centimetres (cm) with our size chart.
Tips for an accurate result
- Keep hair flat (e.g. do not measure over a voluminous hairstyle)
- Keep the tape horizontal, i.e. along the largest circumference
- Do not measure too loosely
- For values between two sizes:
→ usually choose the larger size (depending on helmet model / fit)
Important note on fit
The right helmet should fit firmly without causing uncomfortable pressure points.
A new helmet may feel a little tighter at first, as the inner lining adapts slightly over time.
- Worldwide shipping
- Genuine parts & verified quality
- Personal email support
- 14-day returns — in stock ships within 24h
Shipping & Returns
We ship with DHL and FedEx — express on request. If an item is in stock, express delivery can often go out within 1 business day. Standard delivery takes about 2–5 business days domestically and usually around a week worldwide. Please check the available shipping options and delivery times in your cart, as we offer several carriers depending on the country.
Returns must be registered in advance by email and are possible in line with our cancellation policy (14-day return request + 14-day return window after approval). Please note: unregistered returns are not accepted. You'll find all details on conditions, exceptions and refunds in our cancellation policy.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details and have no access to your credit card information.
Wearing the exact racing livery Augusto Fernández carried into the 2022 MotoGP season, the KYT R2R Max Version Replica brings authentic grand-prix heritage to the road in a head-turning matte finish that sets it apart from every stock graphic on the market. This is not a generic race-inspired design — it is a faithful reproduction of a real championship campaign, finished without a trace of gloss so the artwork commands attention on its own terms.
Key Features
- Genuine Augusto Fernández 2022 replica livery in a premium matte finish — part number Y6R20003
- ADT Advanced Thermoplast shell available in two shell sizes for a more precise fit across the size run
- ECE 22.06 certified for full road-legal compliance across Europe
- Dual-visor system: scratch-resistant main visor with UV380 protection plus an integrated side-operated drop-down sun visor
- Pinlock MaxVision 70 insert included as standard — clear vision in rain, cold and changing light
- Hydrocool interior lining with moisture management, intercom speaker pockets and emergency cheek-pad quick-release
- Micrometric quick-release buckle — easy to operate even with gloves on
Shell Construction and Safety
The R2R is built around KYT's ADT Advanced Thermoplast shell, a compound chosen for its balance of impact absorption and manageable weight across all-day riding. Two distinct shell sizes cover the full XS-to-XXL size range, which means smaller sizes are not simply padded down from a single large mould — the fit is genuinely tailored. ECE 22.06 certification, the most current European safety standard, is verified at every size.
Visor System
The main visor is treated for scratch resistance and blocks UV radiation up to 380 nm. A central locking mechanism holds it firmly at any chosen position, and tool-free removal makes cleaning or a visor swap at the roadside a matter of seconds. The integrated sun visor drops on command via a side-mounted slider, eliminating the need to carry tinted eyewear for summer riding. The included Pinlock MaxVision 70 lens clips directly to the prepared visor pins and virtually eliminates fogging during cold or wet conditions.
Hydrocool Interior
Inside, the Hydrocool lining draws moisture away from the skin and allows heat to dissipate efficiently — a meaningful difference on longer tours or urban summer commutes. The fabric is soft, fully removable and machine washable. Glasses wearers benefit from shaped channels in the cheek pads that prevent pressure on the arms of spectacle frames, and the emergency quick-release tabs on the cheek pads allow first responders to remove the helmet safely after an incident.
Ventilation
Two generously sized front intake vents feed air through internal channels that run across the crown and exit through a rear spoiler-integrated exhaust. The airflow circuit reduces heat build-up and keeps the interior fresh during spirited riding without creating intrusive noise at motorway speeds.
Retention System
A reinforced micrometric buckle closes and opens with a single hand — practical when suiting up in gloves and reassuringly secure once locked. The adjustment range is wide enough to accommodate varying neck-warmer and balaclava thicknesses across the seasons.
Fitment and Compatibility
The KYT R2R is a universal full-face helmet suitable for all motorcycle types and rider styles. Available in sizes XS through XXL; refer to the head-circumference guide below when selecting your size.
Size Guide
| Size | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| Head circumference (cm) | 53–54 | 55–56 | 57–58 | 59–60 | 61–62 | 63 |
Measure around your head just above the eyebrows for the most accurate result. If your measurement falls between two sizes, choose the larger of the two.
Specifications
- Brand: KYT
- Model: R2R Max Version Augusto Fernández Replica Matte 2022
- Part number: Y6R20003
- Shell material: ADT Advanced Thermoplast
- Shell sizes: 2 (covering XS–XXL)
- Safety certification: ECE 22.06
- Visor: scratch-resistant, UV380, tool-free removal, Pinlock MaxVision 70 ready (insert included)
- Sun visor: integrated drop-down, side-operated
- Interior: Hydrocool lining, removable and washable, intercom-ready, emergency cheek-pad quick-release
- Retention: micrometric buckle
- Sizes available: XS, S, M, L, XL, XXL
| Brand | KYT |
|---|---|
| Model | R2R Max Version Augusto Fernández Replica Matte 2022 |
| Part Number | Y6R20003 |
| Shell Material | ADT Advanced Thermoplast |
| Safety Certification | ECE 22.06 |
| Visor | Scratch-resistant, UV380 protection, Pinlock MaxVision 70 ready (insert included) |
| Sun Visor | Integrated drop-down, side-operated |
| Interior Lining | Hydrocool, removable and washable, intercom-ready, emergency cheek-pad quick-release |
| Retention System | Micrometric quick-release buckle |
Fitment data coming soon.
No reviews yet.
// KYT
KYT R2R Helmet Max Version Augusto Fernández Replica Matte 2022 Y6R20003
Tech specs
- Brand
- KYT
- Model
- R2R Max Version Augusto Fernández Replica Matte 2022
- Part Number
- Y6R20003
- Shell Material
- ADT Advanced Thermoplast
- Safety Certification
- ECE 22.06
- Visor
- Scratch-resistant, UV380 protection, Pinlock MaxVision 70 ready (insert included)
- Sun Visor
- Integrated drop-down, side-operated
- Interior Lining
- Hydrocool, removable and washable, intercom-ready, emergency cheek-pad quick-release
- Retention System
- Micrometric quick-release buckle
- Worldwide shipping
- Genuine parts & verified quality
- 14-day returns — in stock ships within 24h
- Personal email support
// Support
Frequently asked questions
Shipping & delivery
Estimate your shipping
Get the real shipping cost for this item to your address — the same rates as checkout.