TGP MotoRacing Titanium Nut Kit M10x1.25 Hex Rear Sprocket Carrier Ducati Panigale V4/S/R (2018-2024) – Purple

Finished in a striking anodised purple that draws the eye straight to the drivetrain, this TGP MotoRacing titanium nut kit carries the heritage of Italian racing preparation into your Ducati Panigale V4, V4 S and V4 R. Six CNC-machined Grade 5 titanium nuts replace the stock rear sprocket carrier fasteners with hardware that is measurably lighter, inherently corrosion-resistant and visually unmistakable.

Key Features

• Grade 5 titanium construction delivers an exceptional strength-to-weight ratio — holding firm under track stresses while trimming unsprung mass at the rear wheel.
• CNC-machined to precise M10x1.25 tolerances, not pressed or stamped, ensuring a true fit on the sprocket carrier without thread distortion.
• 12-point hex profile (12-Kant) allows firm torque application with a standard socket even in tight clearances around the swingarm.
• Anodised purple finish is durable and consistent across all six nuts — a deliberate styling choice that complements Ducati's own race-inspired colour palette.
• Titanium's natural corrosion resistance keeps the finish and structural integrity intact through rain, track detritus and brake-dust contamination.
• Set of 6 nuts covers the full sprocket carrier bolt pattern in one purchase — no mixing with inferior hardware.

Design, Finish and Craftsmanship

The purple anodised colour is not a paint or lacquer — it is an electrochemical surface treatment integral to the titanium itself, meaning it will not chip or peel under the thermal and mechanical cycling a Panigale V4 generates at the rear end. TGP MotoRacing's CNC machining process holds the thread form and hex geometry to tight tolerances throughout the batch, so every nut in the kit behaves identically when torqued down. The 12-point profile is a deliberate departure from the six-point standard: more contact faces mean lower stress per face, and more positional options when a socket must clear adjacent bodywork or sprocket teeth.

Performance and Weight Savings

Grade 5 titanium (Ti-6Al-4V) is the benchmark alloy for high-performance fastener applications — the same specification used in MotoGP and World Superbike paddock builds. It is approximately 40 percent lighter than comparable steel hardware while matching or exceeding the tensile strength required for sprocket carrier duty. Over the course of a track day the cumulative effect on unsprung and rotating mass is real, and on a machine as finely balanced as the Panigale V4 R every gram at the rear wheel matters.

Fitment and Compatibility

This kit is engineered specifically for the rear sprocket carrier on the following Ducati models:

• Ducati Panigale V4 (2018–2024)
• Ducati Panigale V4 S (2018–2024)
• Ducati Panigale V4 R (2018–2024)

Thread specification M10x1.25 matches the OEM sprocket carrier stud pitch on all listed variants. Always verify torque settings against the current Ducati workshop manual before installation.

Specifications

• Thread size: M10x1.25
• Head type: 12-point hex (12-Kant)
• Material: Titanium Grade 5 (Ti-6Al-4V)
• Finish: Anodised purple
• Manufacturing process: CNC-machined
• Quantity: 6 nuts per kit
• Application: Rear sprocket carrier
• Fitment: Ducati Panigale V4 / V4 S / V4 R (2018–2024)