Talos X50 Two Piece P4 32/36 108mm Front Right Brake Caliper | X50.108.HD.R

If you want a front brake caliper that delivers genuine trackday performance without demanding a full race-team budget, the Talos X50 is the upgrade to reach for. Designed around an asymmetric four-piston layout with 32 mm and 36 mm pistons, it gives you a powerful initial bite, precise modulation through the middle of the lever stroke, and consistent feel even during extended, heat-intensive braking zones. This is the front right unit, mounting at a 108 mm pitch.

Key Features

• Asymmetric 4-piston setup (2× 32 mm, 2× 36 mm) for powerful initial braking combined with fine modulation through the full lever stroke
• Two-piece body construction optimises caliper rigidity and dimensional accuracy, keeping flex to a minimum under hard braking
• Stainless steel pistons resist heat build-up, reduce wear and maintain consistent pad contact across long sessions
• Hard-anodised finish protects the aluminium body against corrosion, abrasion and elevated temperatures over the long term
• 688 g weight strikes a practical balance between outright stiffness and unsprung mass reduction
• Compatible with brake disc diameters of 290–330 mm, covering a wide range of sportsbike fitments

Two-Piece Body: Rigidity Where It Matters

The X50's two-piece caliper body is engineered to minimise flex under repeated, high-load braking events. Precise manufacturing tolerances mean the pistons travel true, pad wear stays even across the full pad surface, and the feedback arriving at the lever is consistent and readable. Whether you are threading through a technical chicane or scrubbing speed from a fast straight, the caliper does exactly what you ask of it.

Stainless Steel Pistons and Hard-Anodised Finish

Racing environments punish inferior materials quickly. The X50 uses stainless steel pistons throughout, which hold their shape at high temperatures, resist surface degradation and contribute to stable, fade-resistant braking when lap after lap pushes the system to its limits. The hard-anodised aluminium body adds a further layer of durability, protecting the caliper from the heat cycles, road grime and mechanical contact that accumulate over a full season of serious use.

A Note on Road Use

The Talos X50 is designed exclusively for closed-circuit racing and track use. It is not road-approved and must not be fitted to a motorcycle used on public roads.

Fitment and Compatibility

The X50 mounts at a 108 mm radial pitch and is compatible with disc diameters between 290 mm and 330 mm. The wide fitment range covers many current and recent sportsbike platforms, including models from Aprilia, BMW, Ducati, Honda, Kawasaki, KTM, MV Agusta, Suzuki, Triumph and Yamaha, among others. Always verify the mounting pitch, disc diameter and caliper position against your specific model before ordering. Supplied as the front right caliper only; brake pads are not included.

Specifications