OZ Piega Forged Aluminium Wheel Set for Ducati Panigale 1299/S (2015-2018)

Developed by OZ's SBK Racing division, the Piega forged aluminium wheel set is a direct-fit upgrade for the Ducati Panigale 1299/S that pays dividends every time you leave the garage — sharper turn-in on the daily commute, more confidence mid-corner on a Sunday blast, and genuine weight savings that let the engine's character shine through. This is one of the most straightforward performance upgrades available for the 1299 platform.

Key Features

• Five-spoke Piega design engineered by OZ's SBK Racing department, balancing stiffness and low rotational mass for real-world ride improvement.
• Forged aluminium construction reduces unsprung and rotating weight compared to the stock cast wheels, enhancing agility and steering response at all speeds.
• Complete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), both sized as direct replacements for the Panigale 1299/S originals.
• Supplied with quality bearings, aluminium angled valve stems, and spacers (fitted only where required).
• Includes a rear sprocket carrier — note that the original Ducati rear sprocket is not compatible and will need to be replaced.
• Dual-purpose design equally at home on road and track, with no compromise between everyday usability and performance-focused riding.
• Made in Italy to OZ's exacting manufacturing standards for long-term reliability.

Performance on Road and Track

Reducing rotating mass is one of the most efficient ways to improve a motorcycle's dynamics. By spinning lighter wheels, the Panigale 1299/S responds more eagerly to throttle inputs, brakes with greater precision, and changes direction with noticeably less effort through tight sequences. The Piega's five-spoke geometry was refined in Superbike competition, so the stiffness-to-weight ratio is optimised rather than simply minimised — you get wheels that hold their line under hard braking without sacrificing the suppleness needed for bumpy road surfaces.

Everyday Usability and Value

Unlike dedicated race wheels that demand constant attention, the OZ Piega set is designed for regular road use. The anodised finish resists corrosion from road grime and brake dust, and the included quality bearings are built to withstand the thermal cycling of street riding. Part numbers P3102DU35 (front) and P6012DU60 (rear) confirm these are purpose-engineered for the 1299 platform rather than adapted from a generic catalogue — fitment is precise and installation is straightforward for any competent workshop.

Fitment and Compatibility

This wheel set is developed specifically for the Ducati Panigale 1299 and 1299 S, model years 2015 to 2018. The wheels are a direct swap for the original equipment wheels. Please note that the factory rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket will be required at the time of fitment.

Specifications

• Brand: OZ
• Model: Piega
• Construction: forged aluminium
• Front wheel size: 3.50 x 17
• Rear wheel size: 5.50 x 17
• Part numbers: P3102DU35 (front) + P6012DU60 (rear)
• Origin: Made in Italy
• Fitment: Ducati Panigale 1299 / 1299 S (2015-2018)