K-Tech Slide Bush Kit for Ducati Panigale 1299 S/R (2015–2018) – GBS-019

Riders who demand all-day composure from their Panigale 1299 S or R know that fork feel starts long before the compression circuit. The K-Tech Slide Bush Kit GBS-019 replaces the OEM fork guide bushes with precision-manufactured items built to tighter tolerances, so the fork tracks accurately and moves freely without the stiction that dulls feedback and fatigues your hands over a long session or a full day in the saddle.

Key Features

• Hardened steel construction with copper coating delivers long service life under repeated compression and rebound cycles.
• PTFE contact surface dramatically reduces friction, giving the fork a smoother, more consistent action from the first millimetre of travel.
• OEM-specification dimensions (43.00 mm inner diameter, 47.00 mm outer diameter, 15.00 mm height, 2.00 mm wall thickness) ensure a direct, rattle-free fit.
• Supplied as a matched pair so both fork legs are renewed simultaneously, preserving balanced handling.
• Compatible exclusively with the S and R variants of the Ducati Panigale 1299 — engineered to the correct fork tube diameter for those models.

Build Quality & Performance

K-Tech engineers the GBS-019 from hardened steel rather than the softer alloys found in some aftermarket alternatives. The copper intermediate layer bonds reliably to the steel substrate and acts as a sacrificial bearing surface during the running-in period, while the PTFE outer face provides the low-friction interface that contacts the fork tube day after day. The result is a bush that resists galling and oval wear far longer than a standard replacement, maintaining precise fork alignment and consistent damping response throughout its service life.

On the road, the difference is felt as a reduction in that characteristic initial stiction — the momentary resistance at the top of the stroke when the fork is cold or when fine road texture is trying to deflect the front wheel. With the GBS-019 installed, the front end stays more composed under braking into slow corners and tracks more faithfully over mid-corner bumps, translating directly into rider confidence and reduced arm-pump on longer rides.

Installation Note

Installation of fork slide bushes requires fork disassembly, specialist pressing tools and the knowledge to set the correct seating depth. K-Tech specifies that fitting must be carried out by an authorised K-Tech Service Centre to guarantee optimal performance and safety. Please contact your nearest centre before ordering if you are unsure of the service availability in your region.

Fitment & Compatibility

The GBS-019 is designed for the following models only:

• Ducati Panigale 1299 S — model years 2015, 2016, 2017, 2018
• Ducati Panigale 1299 R — model years 2015, 2016, 2017, 2018

This kit is not suitable for the standard (non-S, non-R) Ducati Panigale 1299. If you are unsure of your model variant, check the frame identification plate or consult your Ducati dealer before purchasing.

Specifications

• Part number: GBS-019
• Inner diameter: 43.00 mm
• Outer diameter: 47.00 mm
• Height: 15.00 mm
• Wall thickness: 2.00 mm
• Material: hardened steel with copper coating and PTFE contact surface
• Quantity: 2 slide bushes (one pair)
• Fitment: Ducati Panigale 1299 S / 1299 R (2015–2018)