The facts.
| Brand | Gilles Tooling |
|---|---|
| Series | 2DGT |
| Part number | 2DGT-02-15 |
| Type | Adjustable handlebar riser set with adapter kit ABK-15 |
| Material | EN AW 7075-T6, upper clamp 6082-T6 |
| Handlebar | 28.6 mm tapered handlebars |
| Adjustment | 5 mm steps with shims; on the MT-10 that gives 10 mm lower, 5 mm lower or the original height / 3.6 mm steps |
| Top yoke | Top yokes with 10.5 mm holes |
| Fitment | Yamaha MT-10 (2016–2021) |
| Road approval | ABE No. KBA 91440 (no acceptance inspection) |
DescriptionThe whole story▼
The MT-10 carries the crossplane R1 engine in a naked frame, and its handlebar sits high enough to catch wind at speed. This version of the clamp works the other way from most: fitted with the shims it puts the bar ten millimetres lower, five millimetres lower, or back at the standard height.
Key Features
- Height: 5 mm steps with shims; on the MT-10 that gives 10 mm lower, 5 mm lower or the original height
- Fore and aft: 3.6 mm steps
- For 28.6 mm tapered handlebars
- Fits top yokes with 10.5 mm holes
- CNC-machined from EN AW 7075-T6, upper clamp 6082-T6
- Road legal under ABE No. KBA 91440, no acceptance inspection
Type RN45
Gilles lists the MT-10 of 2016 to 2021 under RN45 with the adapter kit ABK-15.
Reach
Fore and aft the clamp moves in 3.6 millimetre notches, so the reduction in height can be combined with a shorter or longer reach.
Road Approval
For the Yamaha MT-10, ABE No. KBA 91440 applies. The document notes that with shims the height may be changed by up to 20 mm. No examiner and no entry in the papers: point 11 of the approval says the acceptance inspection is not required. If you later fit an aftermarket handlebar with its own Gutachten, its conditions apply and the installation has to be checked separately.
Scope of Delivery
In the box: the Gilles 2DGT risers made for this model, the model-specific adapter kit ABK-15 and the shims for the height adjustment. The ABE document downloads from this page.
Fitting
Take the original handlebar clamps off, fit the risers, and leave the bolts loose until the bar sits where you want it. Tighten to the specified torque, check the clearance to the tank at full lock and look over the fasteners again after the first ride.
Specifications
- Brand: Gilles Tooling
- Series: 2DGT
- Part number: 2DGT-02-15
- Type: Adjustable handlebar riser set with adapter kit ABK-15
- Material: EN AW 7075-T6, upper clamp 6082-T6
- Handlebar: 28.6 mm tapered handlebars
- Adjustment: 5 mm steps with shims; on the MT-10 that gives 10 mm lower, 5 mm lower or the original height / 3.6 mm steps
- Top yoke: Top yokes with 10.5 mm holes
- Fitment: Yamaha MT-10 (2016–2021)
- Road approval: ABE No. KBA 91440 (no acceptance inspection)
What's includedEverything in the box▼
- 1x Gilles 2DGT handlebar riser set (2DGT-02-15)
- 1x adapter kit ABK-15
DownloadsCertificate▼
Carry a printed copy of the ABE certificate when riding on German roads.
FitmentWhich bikes this fits▼
- Yamaha MT-10 (2016–2021)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.