⟲ 360° — drag meThe facts.
| Brand | Ducabike |
|---|---|
| Part number | PLC01 |
| Material | Billet aluminium, machined from solid |
| Finish | Coloured anodising |
| Colours | Black/black, black/gold, black/blue, black/silver, black/green, black/red and black/orange |
| Pieces | 1 |
| Details | Protects the lever from accidental pressure, for bars with 14–19 mm inner diameter |
| Fitment | Ducati Monster 1200 (2014-2021) |
| Road approval | No ABE supplied – check local rules |
DescriptionThe whole story▼
Ducabike lists its Clutch Lever Guard as part number PLC01, and here that number is matched to the Ducati Monster 1200 produced 2014-2021. The upgrade at the left-hand end of the handlebar is modest in scope but noticeable every time you reach for the bars of the Ducati Monster 1200. Italian craftsmanship meets daily use on the Ducati Monster 1200: PLC01 sits at the left-hand end of the handlebar and catches the eye each time you set off.
Key Features
- Solid-machined aluminium construction
- Fits bars with 14–19 mm inner diameter
- One part in the box
- Available anodised in black/black, black/gold, black/blue, black/silver, black/green, black/red and black/orange
- Guards the lever against unintended activation in contact or a fall
- Fits in place of the original part
- Fitment per Ducabike: Ducati Monster 1200, 2014-2021
- PDF fitting instructions in the Downloads tab
- Made in Italy by Ducabike
Which Bike It Fits
Ducabike states compatibility of PLC01 with the Ducati Monster 1200 for 2014-2021. Motorcycles from neighbouring model ranges are not covered by this page for the Ducati Monster 1200, so check yours. Match the exact model designation of your bike with Ducati Monster 1200 before adding PLC01 to the basket. Same part, different bikes: PLC01 is also catalogued for Ducati Diavel, Ducati Diavel 1260, Ducati Diavel 1260 S, Ducati Diavel V4, with separate pages. Inter-Pace answers fitment questions about PLC01 and the bike by email or phone. According to Ducabike, PLC01 fits the Ducati Hypermotard 698 Mono only once the stock handguard has been removed.
Fitting Advice
Ducabike's fitting concept for PLC01 is simple: same position at the left-hand end of the handlebar, no adaptation, the original part removed. Once the original part has been removed at the left-hand end of the handlebar, the Ducabike part goes into the same position. A single component arrives when you order PLC01, ready to take the place of the original part. Do not ride if anything about the brakes or clutch seems unusual after PLC01 has been installed. With the handlebar turned to each side, check that PLC01 touches nothing and that no cable is pulled tight. Once PLC01 is fitted, turn the handlebar lock to lock to make sure nothing catches. Ducabike provides a PDF for fitting PLC01, which you will find under Downloads on this page.
Details Explained
Reference PLC01 sits in front of the lever and keeps it from being pressed by accident. A bar bore of 14–19 mm is the requirement Ducabike states for mounting PLC01.
Maintenance Tips
Do not aim a pressure washer at close range on the controls. Brake fluid can damage painted and anodised surfaces, so remove any splash from PLC01 at once. Spilled brake fluid should be dealt with first, before you continue with any other work near PLC01.
Production and Finish
Using billet aluminium, Ducabike produces reference PLC01 with tight, consistent contours. Ducabike cuts the clutch lever guard from a block of aluminium rather than using a casting. Next to other Ducabike parts, the finish of PLC01 fits in naturally.
Colour Options
When you order PLC01, the option selector above shows the available versions: black/black, black/gold, black/blue, black/silver, black/green, black/red and black/orange.
Registration and Approval
Regarding approval, the status of PLC01 is clear: Ducabike issues no documents. For racing on closed circuits other rules apply than on the road, so check which ones concern your use of PLC01. Whether PLC01 may remain fitted for road riding is a matter for local law, not for the seller.
Specifications
- Brand: Ducabike
- Part number: PLC01
- Material: Billet aluminium, machined from solid
- Finish: Coloured anodising
- Colours: Black/black, black/gold, black/blue, black/silver, black/green, black/red and black/orange
- Pieces: 1
- Details: Protects the lever from accidental pressure, for bars with 14–19 mm inner diameter
- Fitment: Ducati Monster 1200 (2014-2021)
- Road approval: No ABE supplied – check local rules
DownloadsInstructions▼
FitmentWhich bikes this fits▼
- Ducati Monster 1200 (2014–2021)
- Ducati Diavel (2015–2018)
- Ducati Diavel 1260 (2019–2022)
- Ducati Diavel 1260 S (2019–2022)
- Ducati Diavel V4 (2023–2026)
- Ducati HYPERMOTARD 698 Mono (2024–2026)
- Ducati Monster 797 (2017–2020)
- Ducati Monster 821 (2015–2021)
- Ducati Monster 937 (2021–2025)
- Ducati Monster 937 SP (2023–2025)
- Ducati Monster 1200 R (2016–2019)
- Ducati Monster 1200 S (2015–2021)
- Ducati Monster V2 890 (2026)
- Ducati Panigale 899 (2014–2015)
- Ducati Panigale 959 (2016–2019)
- Ducati Panigale 1199 R (2013–2017)
- Ducati Panigale 1199 S (2012–2015)
- Ducati Panigale 1299 (2015–2017)
- Ducati Panigale 1299 S (2015–2017)
- Ducati Panigale V2 890 (2025–2026)
- Ducati Panigale V2 955 (2020–2024)
- Ducati Panigale V2 S 890 (2025–2026)
- Ducati Panigale V4 (2018–2026)
- Ducati Panigale V4 R (2019–2026)
- Ducati Panigale V4 S (2018–2026)
- Ducati Scrambler 800 (2015–2025)
- Ducati Scrambler 1100 (2018–2023)
- Ducati Scrambler 1100 Special (2018–2019)
- Ducati Scrambler 1100 Sport (2018–2024)
- Ducati Scrambler Sixty2 (2016–2020)
- Ducati Streetfighter 848 (2015)
- Ducati Streetfighter V2 890 (2025–2026)
- Ducati Streetfighter V2 955 (2022–2024)
- Ducati Streetfighter V2 S 890 (2025–2026)
- Ducati Streetfighter V4 (2020–2024)
- Ducati Streetfighter V4S (2020–2024)
- Ducati Supersport 939 (2017–2020)
- Ducati Supersport 939 S (2017–2020)
- Ducati Supersport 950 (2021–2024)
- Ducati Supersport 950 S (2021–2024)
- Ducati X Diavel (2016–2024)
- Ducati X Diavel Dark (2021–2024)
- Ducati X Diavel V4 1200 (2026)
- KTM 790 Duke (2018–2020)
- KTM 890 Duke (2021–2023)
- KTM 890 Duke R (2020–2021)
- KTM 990 Duke (2024)
- KTM 990 Duke R (2025)
- KTM 1290 Superduke R (2020–2021)
- KTM 1290 Superduke R EVO (2022–2023)
- KTM 1390 Super Duke R (2024)
- KTM 1390 Super Duke R EVO (2024)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.