BST Mamba 7 TEK Carbon Rear Wheel – Aprilia RSV4 / RR / RF / 1100 Factory (2015–2020)

Certified for both road and track, the BST Mamba 7 TEK carbon rear wheel for the Aprilia RSV4, RR, RF and 1100 Factory (2015–2020) carries full DOT E and JWL homologation — the two most demanding international wheel safety standards — while tipping the scales at just 3.2 kg. That dual certification means you can ride it to the circuit, set your fastest ever lap, and ride home without compromise or paperwork.

Key Features

• DOT E and JWL certified: meets the strictest road-legal and motorsport safety standards for unrestricted use on public roads and at the track.
• Ultralight construction: at 7.05 lbs / 3.2 kg, the Mamba 7 TEK dramatically reduces unsprung and rotating mass, sharpening steering response and improving suspension compliance.
• Pre-preg carbon fibre rim: aerospace-grade pre-preg carbon construction delivers exceptional stiffness-to-weight ratio and consistent flex behaviour under cornering loads up to 772 Nm.
• 6082 T6 aluminium hub: precision-machined from aircraft-grade 6082 T6 aluminium for superior strength at the interface where forces are greatest.
• BST ultra-high-speed 90° aluminium valve with cap: engineered to stay sealed under the centrifugal forces generated at race speeds.
• 2-year factory warranty: BST stands behind every wheel with a full two-year manufacturer's guarantee.

Engineering Behind the Mamba 7 TEK

BST's Mamba 7 TEK design is the product of decades of motorsport engineering. The seven-spoke architecture is optimised through finite-element analysis to place material exactly where load paths demand it, eliminating dead weight everywhere else. The result is a wheel that handles radial loads of 994.3 lbs / 451 kg and static loads of 617 lbs / 280 kg, with torsional rigidity rated to 1,030 Nm — figures that exceed the demands of even aggressive track-day riding on a high-powered Aprilia superbike.

Road and Track Confidence

The dual DOT E and JWL homologation is not merely a compliance tick-box; it reflects BST's commitment to a wheel that performs predictably across the full spectrum of riding conditions. Whether you are threading through traffic on a Sunday morning or braking hard into a tight chicane, the Mamba 7 TEK's certified structural integrity gives you one less variable to think about.

Finish Options

The Mamba 7 TEK is available in a range of finishes to suit individual aesthetics and the livery of your Aprilia: gloss, satin-matte, forged-carbon, solid blue, solid red, solid green, solid gold, solid silver, solid orange and black ink. Each finish is applied to the same structurally identical wheel. Bearing choice — steel or ceramic — is also configurable to match your performance priorities.

Fitment and Compatibility

This rear wheel is developed specifically for the following Aprilia models:

• Aprilia RSV4 (2015–2020)
• Aprilia RSV4 R (2015–2020)
• Aprilia RSV4 RR (2015–2020)
• Aprilia RSV4 RF (2015–2020)
• Aprilia RSV4 1100 Factory (2015–2020)

The wheel is supplied as standard in the original OEM size. Alternative rim widths are available on request — please contact Inter-Pace before ordering if you require a non-standard dimension.

Specifications