Akrapovic Evolution Line Carbon Full Exhaust System Aprilia RSV4 / RR / RF / 1100 Factory 2015-2020 S-A10E8-RC

The Akrapovic Evolution Line (Carbon) is a full titanium exhaust system engineered for riders who demand measurable, trackday-ready performance gains from their Aprilia RSV4, RSV4 RR, RSV4 RF or RSV4 1100 Factory. With a weight saving of 3.2 kg over the stock system and a power increase of 7.1 hp, the numbers speak for themselves — and the sound will leave you in no doubt this is a serious piece of kit.

Key Features

• Saves 3.2 kg over the standard exhaust (stock: 7.9 kg, Akrapovic: 4.7 kg) — a meaningful reduction that sharpens steering feel and reduces unsprung mass.
• Adds 7.1 hp over the factory figure (stock: 191.5 hp, Akrapovic: 198.2 hp), delivering a noticeably stronger power delivery across the rev range.
• Torque gain of 3 Nm at 10,800 RPM — exactly where the RSV4's V4 thrives on track.
• Sound level increases by 2 dB (stock: 100 dB, Akrapovic: 102 dB) for a deeper, more purposeful racing note without becoming unnecessarily antisocial for road use.
• Full titanium construction throughout, with a carbon end can — combining extraordinary strength-to-weight ratio with premium aesthetics.
• Direct bolt-on fitment for Aprilia RSV4, RSV4 RR, RSV4 RF and RSV4 1100 Factory model years 2015 to 2020.

Built for Performance, Usable Every Day

Akrapovic's Evolution Line occupies the ideal middle ground between an outright race system and a practical road exhaust. The titanium headers and collector are shaped to maximise exhaust gas flow, and the carbon silencer keeps the overall weight impressively low without sacrificing durability. Whether you are heading to a trackday or simply want a more rewarding ride on your regular commute, this system delivers a genuine upgrade in every scenario. The reduction in overall exhaust mass also contributes to a lower centre of gravity, which improves the bike's agility through corners.

Track Use and Practical Considerations

This system is developed with track riding in mind, and the performance figures reflect back-to-back dyno testing against the stock Aprilia exhaust. Riders should note that on RSV4 models from 2019 onwards, the engine management system may illuminate the engine warning light following installation. This is a normal response to the altered exhaust gas characteristics and does not indicate a mechanical fault, though mapping or an appropriate ECU flash is recommended to extract the full performance benefit and extinguish the warning. Akrapovic part number: S-A10E8-RC.

Fitment and Compatibility

• Aprilia RSV4 (2015-2020)
• Aprilia RSV4 RR (2015-2020)
• Aprilia RSV4 RF (2015-2020)
• Aprilia RSV4 1100 Factory (2019-2020)

Note: On 2019 and later models, check whether the engine warning light illuminates after installation and consider ECU remapping for optimal results.

Specifications

• Brand: Akrapovic
• Part Number: S-A10E8-RC
• System Type: Full exhaust system (header, collector and silencer)
• Primary Material: Titanium (headers and collector), carbon (silencer)
• Weight: 4.7 kg (stock: 7.9 kg — saving: 3.2 kg)
• Power Gain: +7.1 hp (stock: 191.5 hp / Akrapovic: 198.2 hp)
• Torque Gain: +3 Nm at 10,800 RPM
• Sound Level: 102 dB (+2 dB over stock 100 dB)
• Fitment Years: 2015-2020