The facts.
| Part number | AGPA42ST |
|---|---|
| Compound | Sintered (ST) |
| Dimensions | 50.9 × 53.9 × 7.3 mm |
| Material | Sintered copper friction material with abrasives and carbon |
| Friction coefficient | 0.46 average, 0.52 maximum (dyno test to JASO standard) |
| Density | 4.50 g/cm³ at 20 °C (+0.10 / −0.05) |
| Hardness | 90 HRR (± 10 HRR, Rockwell HRR scale) |
| Temperature resistance | 450 °C working, 600 °C maximum peak |
| Minimum shear strength | 30 kg/cm² |
| Contents | 2 brake pads, one set for one caliper |
DescriptionThe whole story▼
The back of a motorcycle lives in the dirtiest air on the machine. Everything the rear tyre lifts off a wet road, from water and grit to salt in winter and oil from the surface, passes straight over the caliper. Accossato's AGPA42 rear pads for the Aprilia RSV4 1100 Factory of 2019 to 2025 come in the Sintered (ST) compound, the mix the company puts forward for a steady grip level in the wet as well as the dry.
Key Features
- Sintered (ST) rear brake pads for the Aprilia RSV4 1100 Factory, 2019 to 2025
- Accossato AGPA42, two pads in the box for the one rear caliper
- Aimed at riders who use the bike in rain, cold and changing conditions
- Accossato: a constant grip level at both temperature extremes, with reliable bite on a wet disc
- Organic and ceramic racing versions of the same pad are listed as well
- Front pads for this Aprilia: AGPA106, quoted from 2019 to 2024
- Accossato also catalogues the DKS032 disc for this machine
- No German ABE or test mark held; racing and competition use
Construction and Material Quality
Sintered material has a reputation for wanting heat, and Accossato answers that head on: it says the ST compound holds a high, steady grip level at both ends of the temperature scale and keeps its bite when the disc is wet. At the rear of a fast V4 the first half of that statement matters most, because a rear pad often gets no chance to warm up at all on a road ride, and the rider still expects the same response every time the pedal goes down. The pad range as a whole is built for long service with limited fade, which at this end of the bike shows up mainly as fewer interruptions to the riding.
Using the Rear in the Wet
On a wet road the rear brake is a delicate instrument. Too much pressure and the wheel locks, which on a light rear end happens sooner than most riders expect; too little and you are ignoring a control that could be settling the bike. The practical approach is a small amount of pressure applied early, before the front is doing serious work, so the machine squats slightly and the load moves rearwards before it moves forward. That habit helps on a greasy roundabout and helps again on a wet descent, where it takes some of the burden off the front tyre.
The maintenance side is simple and easily forgotten. A rear caliper that is never cleaned will eventually grip its pads tightly enough that they drag, and a dragging pad on a machine as focused as the RSV4 1100 Factory takes the edge off everything. Rinse the area behind the wheel after a wet ride, keep chain lubricant off the disc, and check now and again that the pads move without force once the caliper is clear of the disc.
Fitment and Compatibility
Accossato's rear listing for the Aprilia RSV4 1100 Factory covers 2019 to 2025 under the reference AGPA42. At the front, the same catalogue offers the AGPA106 from 2019 to 2024. The rear caliper needs one box; the front, with a caliper on each side, needs two. Look at the thickness and the surface of the disc behind them while the old pads are out, and refit both pads as a pair. The DKS032 is the disc Accossato publishes under this model name.
Road Approval
We hold no German ABE and no test mark for the sintered version of these rear pads; they are sold for racing and competition purposes.
Scope of Delivery
The box contains two AGPA42 pads in the Sintered compound, the complete set for the rear caliper.
Specifications
- Part number: AGPA42ST
- Compound: Sintered (ST)
- Dimensions: 50.9 × 53.9 × 7.3 mm
- Material: Sintered copper friction material with abrasives and carbon
- Friction coefficient: 0.46 average, 0.52 maximum (dyno test to JASO standard)
- Density: 4.50 g/cm³ at 20 °C (+0.10 / −0.05)
- Hardness: 90 HRR (± 10 HRR, Rockwell HRR scale)
- Temperature resistance: 450 °C working, 600 °C maximum peak
- Minimum shear strength: 30 kg/cm²
- Contents: 2 brake pads, one set for one caliper
What's includedEverything in the box▼
- 1x Accossato brake pad set (2 pads)
DownloadsData sheet▼
FitmentWhich bikes this fits▼
- Aprilia RSV4 1100 Factory (2019–2025)
- Aprilia RS 660 (2020–2025)
- Aprilia RSV4 FACTORY (2009–2011, 2013–2016)
- Aprilia RSV4 RF (2015–2020)
- Aprilia TUONO V4 1100 (2015)
- Aprilia TUONO V4 1100 FACTORY (2015–2018)
- Aprilia TUONO V4 1100 RR (2015–2019)
- Benelli 502C (2019, 2023–2024)
- Benelli BN600 GT (2014–2015)
- Benelli BN600 R (2012–2017)
- Benelli LEONCINO 500 (2016–2017)
- Benelli LEONCINO 800 (2020–2023)
- Benelli TRK 502 (2016–2020)
- Bimota BB3 1000 (2014–2018)
- Bimota Tesi H2 1000 (2021–2024)
- CFMOTO 125NK (2024)
- CFMOTO 400SR S (2024)
- CFMOTO CL-X 700 SPORT (2022)
- Ducati HYPERMOTARD 821 (2013–2016)
- Ducati HYPERMOTARD 939 (2016–2018)
- Ducati HYPERMOTARD 950 (2019–2024)
- Ducati HYPERMOTARD 950 RVE (2019–2024)
- Ducati HYPERMOTARD 950 SP (2019–2024)
- Ducati Hyperstrada 821 (2013–2016)
- Ducati Hyperstrada 939 (2016–2018)
- Ducati MONSTER 1200 (2014–2021)
- Ducati MONSTER 1200 R (2016–2019)
- Ducati MONSTER 1200 S (2014–2021)
- Ducati MONSTER 821 (2014–2021)
- Ducati MONSTER 821 DARK (2015–2016)
- Ducati MONSTER 937 (2020–2024)
- Ducati Panigale 1199 R (2013–2015)
- Ducati Panigale 1299 (2015–2018)
- Ducati Panigale 1299 S (2015–2017)
- Ducati Panigale 1299 Superleggera (2017)
- Ducati Panigale 899 (2014–2015)
- Ducati Panigale 959 (2016–2020)
- Ducati Panigale V2 955 (2020–2024)
- Ducati Panigale V4 (2018–2026)
- Ducati Panigale V4 R (2019–2024)
- Ducati Panigale V4 S (2018–2026)
- Ducati Panigale V4 Superleggera (2020–2024)
- Ducati STREETFIGHTER 848 (2012–2015)
- Ducati STREETFIGHTER 848 S (2012–2015)
- Ducati STREETFIGHTER V2 955 (2022–2024)
- Ducati STREETFIGHTER V4 (2020–2026)
- Ducati STREETFIGHTER V4S (2020–2026)
- Ducati SUPERSPORT 939 (2017–2020)
- Ducati SUPERSPORT 939 S (2017–2020)
- Ducati SUPERSPORT 950 (2020–2024)
- Ducati SUPERSPORT 950 S (2020–2024)
- Honda CBR 1000 RR-R (2020–2024)
- Honda CBR 1000 RR-R SP (2020–2025)
- Honda RC213V-S (2016–2018)
- Indian FTR 1200 (2019–2025)
- Indian FTR 1200 R CARBON (2021–2025)
- Indian FTR 1200 RALLY (2019–2024)
- Indian FTR 1200S (2019–2023)
- KTM 1290 SUPERDUKE GT (2016–2020)
- KTM 1290 SUPERDUKE R (2014–2022)
- KTM 1290 SUPERDUKE R EVO (2022)
- KTM RC8 890 C (2022–2024)
- KTM RC8 R 1190 (2009–2015)
- Kawasaki ZX1000 Ninja H2 (2015–2026)
- MV Agusta BRUTALE 1000 RR (2020–2025)
- MV Agusta Brutale 675 (2012–2015)
- MV Agusta Brutale 800 (2013–2025)
- MV Agusta Brutale 800 RR (2016–2025)
- MV Agusta Brutale Dragster RR 800 (2015–2025)
- MV Agusta F3 675 (2013–2020)
- MV Agusta F3 800 (2016–2025)
- MV Agusta RVS #1 800 (2018–2020)
- MV Agusta Rivale 800 (2013–2020)
- MV Agusta Rush 1000 (2020)
- MV Agusta STRADALE 800 (2015–2016)
- MV Agusta SUPERVELOCE 800 (2014–2025)
- MV Agusta TURISMO VELOCE LUSSO RC SCS 800 (2014–2025)
- Moto Guzzi NEVADA 750 (2003–2016)
- Moto Morini Corsaro ZT 1200 (2018–2020)
- Moto Morini Corsaro ZZ 1200 (2018–2020)
- Moto Morini Milano 1200 (2018–2024)
- Moto Morini Scrambler 1200 (2018)
- Moto Morini Super Scrambler 1200 (2020)
- Norton COMMANDO 961 SF (2013–2015)
- Norton COMMANDO 961 SF SPORT (2011–2015)
- Norton COMMANDO 961 SPORT (2018–2019)
- Norton DOMINATOR 961 (2017–2019)
- Norton V4 RR 1200 (2018–2019)
- QJMotor SRK 600 RR (2023)
- QJMotor SRK 800 RR (2024–2025)
- QJMotor SRK 900 RR (2024)
- QJMotor SVT-650 X (2024–2025)
- Triumph SPEED TRIPLE 1200 RR (2022)
- Triumph SPEED TRIPLE 1200 RS (2021–2025)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.