Gilles 2DGT handlebar risers for Honda CB1100
02 · Data & docs

The facts.

Technical data
BrandGilles Tooling
Series2DGT
Part number2DGT-02-01
TypeAdjustable handlebar riser set with adapter kit ABK-01
MaterialEN AW 7075-T6, upper clamp 6082-T6
Handlebar28.6 mm tapered handlebars, 22 mm adapters optional
Adjustment5 mm steps with shims, up to five shims included (model dependent) / 3.6 mm steps, up to 25 mm in each direction
Top yokeTop yokes with 10.5 mm holes
FitmentHonda CB1100 (2013–2016)
Road approvalABE No. KBA 91440 (no acceptance inspection)
DescriptionThe whole story▼

Honda built the CB1100 as a deliberate look back, with an air-cooled four and a wide, flat handlebar. Owners who ride them far rather than polish them often want that bar a little closer. These clamp blocks allow it in small notches and keep the classic silhouette, because the machined body sits low on the yoke instead of towering above it.

Key Features

  • Height: 5 mm steps with shims, up to five shims included (model dependent)
  • Fore and aft: 3.6 mm steps, up to 25 mm in each direction
  • For 28.6 mm tapered handlebars, 22 mm adapters optional
  • Fits top yokes with 10.5 mm holes
  • CNC-machined from EN AW 7075-T6, upper clamp 6082-T6
  • Road legal under ABE No. KBA 91440, no acceptance inspection

Type SC65

Gilles lists the CB1100 from 2013 under this type code and supplies the adapter kit ABK-01 with the number.

Reach and height

Reach changes in 3.6 millimetre notches, up to 25 millimetres each way; height comes from shims in five millimetre steps.

Road Approval

ABE No. KBA 91440 lists the Honda CB1100 for the 2DGT risers. The document notes that with shims the height may be changed by up to 20 mm. Point 11 of the approval states that an acceptance inspection under §19(3) StVZO is not required, so no examiner is involved and nothing changes in the vehicle documents. The risers carry the KBA number; keep the printed ABE with the papers, it downloads from this page.

Scope of Delivery

In the box: the Gilles 2DGT risers made for this model, the model-specific adapter kit ABK-01 and the shims for the height adjustment. The ABE document downloads from this page.

Fitting

The risers go on at the original mounting points of the top yoke. Work loosely first, set the position you want, then tighten every fastener to the value in the Gilles instructions. Turn the bars from lock to lock before riding and check that cables, hoses and wiring still run free.

Specifications

  • Brand: Gilles Tooling
  • Series: 2DGT
  • Part number: 2DGT-02-01
  • Type: Adjustable handlebar riser set with adapter kit ABK-01
  • Material: EN AW 7075-T6, upper clamp 6082-T6
  • Handlebar: 28.6 mm tapered handlebars, 22 mm adapters optional
  • Adjustment: 5 mm steps with shims, up to five shims included (model dependent) / 3.6 mm steps, up to 25 mm in each direction
  • Top yoke: Top yokes with 10.5 mm holes
  • Fitment: Honda CB1100 (2013–2016)
  • Road approval: ABE No. KBA 91440 (no acceptance inspection)
What's includedEverything in the box▼
  • 1x Gilles 2DGT handlebar riser set (2DGT-02-01)
  • 1x adapter kit ABK-01
DownloadsCertificate▼
ABE certificatePDF

Carry a printed copy of the ABE certificate when riding on German roads.

FitmentWhich bikes this fits▼
  • Honda CB1100 (2013–2016)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.