Accossato rear axle sliders PP018 for Ducati SCRAMBLER 800 (2017-2018)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeRear axle sliders (swingarm protection)
Part numberPP018
MaterialAluminium and plastic
Pieces2 (one per side)
Fitting kitSpacers, screws and all fitting parts included (Accossato)
ColourBlack
FitmentDucati SCRAMBLER 800 (2017–2018)
Road approvalNone documented, track use only
CheckCompare with the application list before ordering
DescriptionThe whole story▼

Two very different Scrambler 800s share the PP018 listing: the low, road-focused Café Racer and the Desert Sled, which stands taller on longer-travel suspension and spoked wheels made for dirt roads. Both meet sand sooner or later, whether it has blown across a coastal road after a windy night or lies deep on the track down to the beach. Sand is one of the few surfaces on which a motorcycle can go down at walking pace with almost no warning. Accossato lists the PP018 rear axle sliders for both versions of the Scrambler 800 from 2017 to 2018.

Key Features

  • Rear axle sliders for the Ducati Scrambler 800, 2017 to 2018
  • Listed by Accossato for the Café Racer and the Desert Sled
  • Accossato PP018, a pair of protectors
  • Aluminium and plastic, black finish
  • Spacers, screws and remaining mounting parts in the kit, according to Accossato
  • PF044 front sliders (Café Racer) and TP090 crash pads also listed
  • No German ABE documented; for racing and competition

Construction and Material Quality

The PP018 set is made up of two black protectors in aluminium and plastic, one for each side at the back. Accossato, whose history includes an Enduro world championship title in 1985, says that spacers, screws and all other mounting parts are in the kit. On a Scrambler 800 that goes over, the sliders are meant to reach the ground before the swingarm and the rear axle area, which can reduce the damage there. Sand and grit wear them down, and that is expected; replace one when it has taken a heavy hit or worn thin.

Sand on the Road, Sand on the Track

On tarmac, sand gathers where the wind drops it: on the inside of bends near dunes, at the edges of car parks by the beach and in the shelter of walls. Treat any pale film on the road as a warning, slow down before it and cross it upright, without braking or changing the throttle abruptly. On a sand track, the rules change. The Desert Sled wants momentum, so keep a steady throttle, stand on the pegs with your weight slightly back and let the handlebar move a little rather than gripping it hard; braking hard with the front in deep sand tucks the wheel almost at once. The Café Racer, with its clip-ons and road tyres, is better turned round before the sand gets deep. Parking is the last trap for any Scrambler 800. A side stand sinks into soft sand, so put a flat plate or a piece of wood under it and park facing uphill in gear. Afterwards, rinse the sand out of the chain and look at the sliders, because sand is abrasive.

Fitment and Compatibility

Accossato lists the PP018 for the Scrambler 800 in Café Racer and Desert Sled form from 2017 to 2018, and we have linked it on that basis. For the Café Racer, the PF044 front axle sliders are listed as well, and the TP090 crash pads cover both versions of the Scrambler 800. In our shop, the PP018 also appears for the Scrambler 1100, the Classic and the Icon. If you are unsure which version you own, the registration document or the frame number will tell us.

Road Approval

An ABE or comparable approval for the PP018 is not available to us, so the sliders are intended for track and competition.

Scope of Delivery

Two PP018 rear axle sliders in black, together with the spacers, screws and further parts for mounting that Accossato includes.

Specifications

  • Type: Rear axle sliders (swingarm protection)
  • Part number: PP018
  • Material: Aluminium and plastic
  • Pieces: 2 (one per side)
  • Fitting kit: Spacers, screws and all fitting parts included (Accossato)
  • Colour: Black
  • Fitment: Ducati SCRAMBLER 800 (2017–2018)
  • Road approval: None documented, track use only
  • Check: Compare with the application list before ordering
What's includedEverything in the box▼
  • 2x Accossato rear axle slider
FitmentWhich bikes this fits▼
  • Ducati SCRAMBLER 800 (2017–2018)
  • Ducati SCRAMBLER 1100 (2018)
  • Ducati SCRAMBLER 1100 SPECIAL (2018)
  • Ducati SCRAMBLER 1100 SPORT (2018)
  • Ducati SCRAMBLER CLASSIC (2015–2018)
  • Ducati SCRAMBLER ICON (2015–2018)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.