Cockpit B13 is fluorescent yellow under a matt finish and by a wide margin the most visible helmet in the Braker SV range. On a commuting helmet ridden through a European winter, that is a specification rather than a preference.

Entry sport-touring — and what that means

🔵 Be clear about what this helmet is for: commuting, country roads and moderate distances. It is not a long-distance touring helmet, and at roughly 1525 g on a thermoplastic shell it does not pretend to be.

What it does bring is a feature list normally found a price bracket or two higher.

About the Cockpit B13 graphic

Fluorescent pigments convert ultraviolet into visible light, which is why they appear to glow rather than merely to be bright — and why they keep working in exactly the conditions where ordinary colours fail: overcast mornings, dusk, rain and the flat grey of a winter commute. Under a matt finish the effect is less glossy and no less visible. 🔵 Fluorescent fades faster than any other pigment type under sustained sun, and no care regime stops it — only storage out of direct light slows it down.

HIRP, ECE 22.06 and DOT

Weight matters most at the end of a long day and least in the first ten minutes, which is why it is the specification most often underweighted when buying.

🔵 At around 1525 g the Braker SV is a commuting and country-road helmet. Over four hours you will notice it.

The single-action sun visor

🔵 Keep the sun shield as clean as the main visor. It is the surface closest to your eyes, easy to forget because it lives inside the shell, and a fingerprint on it is far more visible than one outside.

Clean it wet, never dry.

MT-QVSS, and the anti-fog insert you buy separately

🔵 A note on tinted visors and the law. Fixed dark visors are not road-legal at night or in poor visibility in most European countries. On this helmet the question largely disappears — the single-action sun shield drops behind a clear visor and retracts instantly.

The main visor is the MT-V-28B, supplied clear.

Three intakes and a spoiler that vents

🔵 If you ride in genuine heat, treat ventilation as the open question on this helmet. Three intakes and a spoiler exhaust are documented; no independent test has measured the airflow, and MT publishes no figures.

We would rather say that than describe a performance we cannot verify.

The MT-Micrometric+ closure

🔵 Two things to get right before your first ride: the strap length, set bare-handed at home, and the fit itself. Neither can be corrected on the road, and the closure only solves the first.

The Braker SV uses MT-Micrometric+.

Interior, fit and the nose deflector

🔵 Replacement cheek pads are the most useful spare part on any helmet and the least often bought. They correct a fit that has loosened with wear and solve a hot spot that would otherwise mean a different helmet entirely.

Genuine MT pads for the Braker SV are available, as are complete linings.

Universal UCS intercom mount

🔵 If navigation prompts are the reason you want an intercom, the combination that matters on this helmet is the mount and the sun visor: one keeps the audio in place, the other keeps you from squinting at a screen at a junction.

The intercom is a separate purchase.

Where it sits in MT's range

The most useful way to place this helmet: it is a commuting and country-road full-face with a feature list from a higher price bracket and the shell material of a lower one.

🔵 For long-distance touring, MT's own range and everyone else's offer lighter options. For a daily ride, this is a strong package.

When something wears out

🔵 The nose deflector is supplied and worth keeping even if you remove it in summer. It is the cheapest fogging control on the helmet and it costs nothing to refit when the weather turns.

Replacements are available if it is lost.

In the box

• MT Braker SV helmet — Cockpit B13 (HIRP shell)
• Clear MT-V-28B visor, fitted
• Nose deflector
• 🔵 No anti-fog insert — the visor is ready for Pinlock DKS435 or FogOff FOG010; both are separate purchases
• 🔵 No intercom — the helmet has a universal UCS mount; the system is a separate purchase

Size guide

Specification

• Model — MT-Helmets Braker SV
• Part number — 1346D23B13203
• Colour — Cockpit B13 — Matt neon yellow
• Homologation — ECE 22.06 and DOT — road-legal across ECE markets and in the United States
• 🔴 Safety rating — none — SHARP has never listed the Braker SV; no ADAC or Snell result, and no independent road test has been published
• Helmet type — Full-face, entry sport-touring
• Shell — HIRP (High Impact Resistant Polymer)
• Weight — approx. 1525 g
• Sizes — XS to XXXL (seven sizes)
• Visor — MT-V-28B with MT-QVSS two-button tool-free quick release
• 🔴 Anti-fog — ready for Pinlock® DKS435 or FogOff FOG010 — neither insert is supplied
• Sun visor — single-action drop-down shield — one movement of the slider
• Ventilation — three air intakes and an integrated rear spoiler with an air exhaust. 🔴 No independent measurement of the airflow exists
• Retention — MT-Micrometric+ micrometric closure
• Interior — fully removable and washable
• Communication — universal UCS intercom mount — takes standard communicators; no system supplied
• Also supplied — nose deflector
• Impact liner — expanded polystyrene — crushes once and does not recover; replace the helmet after any real impact
• Serviceability — visor, anti-fog insert, sun shield, lining, cheek pads and nose deflector all available separately
• Made for — commuting, country roads and moderate distances — not a long-distance touring helmet
• Manufacturer — MT-Helmets (MT Helmets, Spain)
• Replacement guidance — after around five years of use regardless of condition, and immediately after any impact
• Worth budgeting — an anti-fog insert — Pinlock DKS435 or FogOff FOG010 — before the first cold month. Neither is supplied, and a winter commute mists the visor at every stop without one
• Compared with the Stinger 2 — that helmet costs less and has no sun visor, no DOT approval and no spoiler. Both use HIRP shells homologated to ECE 22.06 — the difference is equipment, not protection standard
• Compared with the Thunder 4 R SV — that helmet costs more and adds a Pinlock DKS435 insert in the box plus roughly 25 g less weight, on the same HIRP platform
• Care — wash the lining by hand a few times a season; never wipe the visor or the sun shield dry, as road dust scratches both permanently
• Sizing note — measure around the widest part of your head, about 1–2 cm above the eyebrows, and try the size the chart gives you. A helmet that can be rolled forward off your head with the strap fastened is too large

• 1x MT Braker SV helmet
• 1x MT-V-28B clear visor (fitted)
• 1x nose deflector
• 1x protective helmet bag
• User manual and MT Helmets stickers