Febur Oil Cooler Kit for Yamaha YZF-R1/M RN32, RN49 & RN65 (2015-2026) FE1493

Febur has earned its place at the front of the grid through decades of supplying race teams at the highest level — and the FE1493 oil cooler kit for the Yamaha YZF-R1/M carries that same engineering heritage directly to your machine. Designed specifically for the RN32, RN49 and RN65 generations (2015-2026), this kit addresses one of the R1's most demanding thermal challenges with a purpose-built solution that keeps oil temperatures stable whether you are chasing lap times or covering road miles at pace.

Key Features

• Significantly enhanced heat-dissipation surface area over the standard oil cooler, maintaining consistent operating temperatures under sustained hard use.
• Prevents the power-sapping temperature spikes that force the R1's electronics to intervene, keeping the engine working at its optimum output throughout a session.
• Constructed from premium materials chosen for long-term durability in race conditions — no compromise on quality where it matters most.
• Trusted by professional race programmes including Puccetti Racing and MV Agusta Reparto Corse, whose engineers demand the same reliability from every component.
• Designed for a straightforward, tool-friendly installation — no specialist fabrication required to fit to the standard mounting architecture of the RN32, RN49 or RN65 chassis.

Engineering Behind the Kit

The Febur FE1493 is the product of a development process rooted in circuit racing rather than catalogue engineering. Where the factory oil cooler is sized for road-use margins, Febur's kit is calibrated around the thermal load a tuned or hard-ridden R1 generates during back-to-back track sessions. The enlarged cooling matrix draws heat away from the oil more rapidly, reducing the risk of oil degradation under extreme conditions and protecting critical engine components from the effects of sustained high temperatures.

For riders who have experienced the R1's tendency to climb in oil temperature on warm days or during long stints, the difference in behaviour is tangible. Throttle response stays consistent, power delivery remains clean, and the engine management system is less likely to pull timing or fuel enrichment in a bid to protect the motor — giving the rider confidence to push harder and later in every session.

Fitment & Compatibility

The Febur FE1493 oil cooler kit is engineered specifically for the following models:

• Yamaha YZF-R1 — RN32 (2015-2016), RN49 (2017-2020), RN65 (2021-2026)
• Yamaha YZF-R1M — RN32 (2015-2016), RN49 (2017-2020), RN65 (2021-2026)

Both standard R1 and R1M variants across all three chassis generations are covered. If you are unsure which chassis code applies to your specific year, the RN prefix can be confirmed via your registration documents or the frame identification plate.

Specifications

• Brand: Febur
• Part number: FE1493
• Type: Oil cooler kit
• Fitment: Yamaha YZF-R1 / YZF-R1M, RN32, RN49, RN65 (2015-2026)
• Intended use: Track and high-performance road use
• Trusted by: Puccetti Racing, MV Agusta Reparto Corse