Brembo PR19x18 Racing CNC radial master cylinder XR01171 hard-anodised aluminium⟲ 360° — drag me
264 g
02 · Data & docs

The facts.

Technical data
Part NumberXR01171
Piston Diameter19 mm
Lever Ratio18 mm
Body MaterialCNC-machined aluminium
Surface FinishHard-anodised, MotoGP specification
Lever TypeFolding lever (standard)
Weight264 g
Hydraulic Brake Light SwitchCompatible
Intended UseRace use only — no road approval
DescriptionThe whole story▼

When every metre of braking distance counts, the Brembo PR19x18 Racing XR01171 delivers the kind of precise, linear feel that MotoGP and Superbike riders depend on. CNC-machined from high-grade aluminium and finished to MotoGP specification, this radial master cylinder gives professional racers and serious track-day riders unrivalled control and confidence under the most extreme braking loads.

Key Features

  • CNC-machined aluminium body for exceptional dimensional accuracy and structural rigidity under race loads
  • Hard-anodised surface finish to MotoGP standard — maximises durability and corrosion resistance over a full racing season
  • 19 mm piston diameter paired with an 18 mm lever ratio delivers progressive, linear braking force and outstanding modulation
  • Folding lever as standard — reduces the risk of lever breakage and handlebar damage in the event of a fall
  • Compatible with an optional remote adjuster, allowing micrometric lever-reach adjustment on the move — essential for professional racing setups
  • Hydraulic brake light switch port available for circuit use where required

Built for the Track

The PR19x18 is derived directly from Brembo's racing programme and carries no compromises associated with road-legal products. The 19 mm bore and 18 mm lever ratio combination is a well-proven specification in top-level competition, producing a firm, direct pedal feel that inspires confidence whether you are trail-braking into a hairpin or scrubbing speed from race pace on a long straight. The hard-anodised housing resists the heat cycles, fluid exposure and mechanical stress that a season of racing will inevitably impose.

Remote Adjuster Compatibility

A remote adjuster can be retrofitted to allow the rider to fine-tune lever reach to the nearest fraction of a millimetre while on circuit — a feature that professional teams and fast amateur racers use to match brake feel to tyre temperature and fuel load as a session progresses. Note that special adapters are required for installation and are not included in the scope of delivery.

Important Notice

This master cylinder is designed exclusively for racing use and carries no road-use approval. It must not be fitted to any motorcycle operated on public roads.

Fitment and Compatibility

The Brembo PR19x18 Racing XR01171 is a universal radial master cylinder suitable for a wide range of competition motorcycles. Confirmed fitment applications include, but are not limited to:

  • Aprilia RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457
  • Bimota KB998 Rimini
  • BMW S1000RR, HP4, HP4R, M1000RR
  • CFMOTO, QJMotor SKR 800 RR
  • Ducati 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S, V2 890, V2 955, V4, V4 S, V4 R, Panigale range
  • Honda CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R
  • KTM RC 390, RC8 1190, 990 RC R
  • Kawasaki ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400
  • MV Agusta F3, F4, 675 SR-R, 450 SR
  • Suzuki GSX-R 600, GSX-R 750, GSX-R 1000
  • Triumph Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto 2, Street Triple 765 R, Street Triple 765 RS
  • Yamaha R3, R6, R7, R9, R1, R1M

Special adapters may be required depending on the specific model. Please verify fitment with your team or supplier before ordering.

Specifications

  • Part number: XR01171
  • Piston diameter: 19 mm
  • Lever ratio: 18 mm
  • Body material: CNC-machined aluminium
  • Surface finish: hard-anodised, MotoGP specification
  • Lever type: folding lever (standard)
  • Weight: 264 g
  • Hydraulic brake light switch: compatible
  • Remote adjuster: optional (not included)
  • Road use: not approved — race use only
What's includedEverything in the box▼
  • 1x Brembo PR19x18 Racing master cylinder
FitmentWhich bikes this fits▼
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.