Accossato footpegs FT102 for KTM 890 DUKE L (2021)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeTouring footpegs, CNC-machined aluminium
Part numberFT102
VersionsFront footpegs, Rear footpegs
FitmentKTM 890 DUKE L (2021)
Road approvalNone documented, track use only
InstallationWorkshop fitting recommended; adjust linkages and check the brake light
DescriptionThe whole story▼

Accossato lists the KTM 890 Duke L for a single model year, 2021, so the bike under most readers of this page has probably had an owner or two already. Used motorcycles tell their stories in small places, and the footpegs are among the most honest: scraped ends from keen cornering, a flattened edge from a tip-over in a car park, a surface polished smooth by countless stops. Fresh pegs are a simple remedy, and the FT102 is Accossato's touring design for this bike, CNC-machined aluminium with a notch that grips the boot.

Key Features

  • Touring footpegs for the KTM 890 Duke L, model year 2021
  • Body machined on CNC equipment from aluminium
  • Anodised black, with a red insert
  • Special notch for boot grip
  • Front (rider) or rear (passenger) version, sold separately
  • A way to replace worn or scraped original pegs
  • No German ABE documented; for track use

Construction and Material Quality

Accossato machines the FT102 from aluminium on CNC equipment, anodises it in black and sets a red insert into it. The special notch is there so that the boot grips better, and that is the only performance claim the maker attaches to the part. Everything else is appearance and material: a dark finish with one red detail.

Reading the Pegs of a Used Bike

If you are looking at a second-hand 890 Duke L, crouch down and study the pegs before you study the paperwork. Deep grinding marks on the underside or the tip point to a rider who used plenty of lean angle, which is not necessarily bad news but is worth a question about track days. A peg bent upwards or with a flattened end often means the bike has been on its side. In that case, also look at the gear lever, the brake pedal, the bar ends and the mirror on the same side, and ask how it happened.

Replacing the pegs is the easy part. Before new ones go on, the workshop should confirm that the mountings are straight and undamaged, because a fresh peg on a bent bracket will simply sit at the wrong angle. Once they are fitted, the FT102 gives your boots a clean, defined surface again, and the red insert adds a small detail that suggests the bike has been looked after. Keep the old pegs with the bike's paperwork; they show a later buyer exactly what you replaced and why.

Fitment and Compatibility

Accossato's list names the Duke 890 L for 2021 only, and that is the year we list. Choose the front version for the rider's pegs or the rear one for the passenger's; they are sold separately. As with any part that carries your weight, have the pegs fitted by a workshop and the fasteners tightened to KTM's values.

Road Approval

The FT102 has no ABE or parts certificate on file for Germany. We sell it for use on the circuit, not on public roads.

Scope of Delivery

One set of FT102 touring footpegs for the KTM 890 Duke L, front or rear depending on the version ordered.

Specifications

  • Type: Touring footpegs, CNC-machined aluminium
  • Part number: FT102
  • Versions: Front footpegs, Rear footpegs
  • Fitment: KTM 890 DUKE L (2021)
  • Road approval: None documented, track use only
  • Installation: Workshop fitting recommended; adjust linkages and check the brake light
What's includedEverything in the box▼
  • 1x Accossato footpeg set
FitmentWhich bikes this fits▼
  • KTM 890 DUKE L (2021)
  • Ducati HYPERMOTARD 821 (2013–2016)
  • Ducati HYPERMOTARD 939 (2016–2019)
  • Ducati HYPERMOTARD 950 (2019)
  • Ducati HYPERMOTARD 950 SP (2019)
  • Ducati Hyperstrada 821 (2013–2017)
  • Ducati Hyperstrada 939 (2016–2017)
  • Ducati MULTISTRADA 1200 (2011–2018)
  • Ducati MULTISTRADA 1200 ENDURO (2016–2019)
  • Ducati MULTISTRADA 1200 S (2011–2018)
  • Ducati MULTISTRADA 1260 (2018–2020)
  • Ducati MULTISTRADA 1260 ENDURO (2019–2020)
  • Ducati MULTISTRADA 1260 S (2018–2020)
  • Ducati MULTISTRADA 1260 S D AIR (2018–2020)
  • Ducati MULTISTRADA 950 (2017–2020)
  • Ducati SCRAMBLER 1100 (2018–2019)
  • Ducati SCRAMBLER 1100 SPECIAL (2018–2019)
  • Ducati SCRAMBLER 1100 SPORT (2018–2019)
  • KTM 690 DUKE (2012–2019)
  • KTM 690 DUKE R (2013–2017)
  • KTM 790 DUKE (2018–2022)
  • KTM 890 DUKE (2021–2023)
  • KTM 890 DUKE R (2020–2023)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.