
The facts.
| Model | LS2 MX703 X-Force |
|---|---|
| Part number | 467032551 |
| Colour | Phantom Matt Orange/Red — Phantom graphic in orange and red over carbon, matt |
| Homologation | ECE 22.06 |
| Helmet type | Off-road / motocross helmet |
| Shell | Carbon 9K, 4 shell sizes (XS–S / M / L / XL–3XL) |
| Weight | 1200 g (±50 g) |
| Sizes | XS to 3XL (seven sizes) |
| Visor | No visor (goggle helmet); extendable, adjustable peak plus additional unbreakable peak supplied; hydration kit |
| Anti-fog | No Pinlock provision listed by LS2 |
DescriptionThe whole story▼
Hour four of an enduro day is where a helmet earns its place. By then you have been thirsty more than once, your neck has absorbed a few hundred landings and the woods have turned the light flat and grey. The MX703 X-Force in Phantom Matt Orange/Red answers those three problems in its own way: a drinking tube that runs inside the helmet, a carbon shell declared at 1,200 g, and a colour scheme that is hard to lose sight of among trees.
Hydration built into the helmet
LS2 supplies a hydration tube with the X-Force and designs the helmet so that the tube is routed inside it. Connect it to your hydration pack and you can drink while riding, without loosening goggles or fumbling with a bite valve clipped to a shoulder strap. On long loops with few stops, that small convenience keeps you drinking regularly, which is what actually prevents the afternoon slump.
Route the tube before the ride, check that it does not press against your cheek once the goggles are on, and rinse it with clean water afterwards so that sports drinks do not leave residue inside.
About the Phantom Matt Orange/Red finish
The Phantom design is made of hard-edged, layered fragments that angle back from the chin towards the rear of the helmet. This version combines a vivid orange with a deeper red, separated by white bars and grey tones, and lets the carbon weave of the shell show through between the coloured fields. The chin bar is mainly white, with red on the mouthpiece and lower edge.
Everything sits under a matt clear coat. Matt takes the shine off the carbon and gives the orange a soft, almost chalky look, and it hides fine scuffs well. The downside of a matt surface is cleaning: dried mud and oily fingerprints stay visible until washed, and polish or wax must never be used because it leaves glossy patches. Water, mild soap and a microfibre cloth are enough. For riding in forest, the bright orange is a practical bonus, as other riders and marshals pick it out earlier.
Light on the neck
The shell is 9K carbon, and LS2 declares 1,200 g with a tolerance of 50 g. Among LS2's adult off-road helmets that is the lowest figure. The KPA-shelled MX700 Subverter Evo II comes in at 1,300 g, the MX708 Fast II at 1,450 g. On a bike the difference shows up as how tired the neck feels late in the day, when every root and step drives the head forward and back.
Air in, heat out
Fresh air enters through the chin bar and through intakes on top of the shell. Grooves moulded into the EPS carry it across the scalp, and exhaust vents at the rear pull the warm air out. On fast fire roads the flow is strong. In tight single track at low speed you will heat up regardless, as with any cross helmet, so a washable liner matters: LS2's is removable, breathable and hypoallergenic, made from laser-cut foam.
Two peaks in the box
The fitted peak is extendable and adjustable for angle, useful when the sun sits low or when roost is flying. A second peak is included that LS2 calls unbreakable and ultra-flexible. On a day with low branches and the odd tip-over, that is the one to have on the helmet, because it bends instead of cracking.
Wear parts and spares
The parts of an off-road helmet that wear first are the liner and the peak. The liner comes out completely for washing, and the box already holds a spare peak. Any helmet that has taken a heavy impact should be retired, even if the carbon shell looks intact, because the EPS beneath may be compressed in a way you cannot see.
Four shell sizes and your fit
LS2 spreads the seven sizes, XS to 3XL, over four shells: XS–S, M, L and XL–3XL. Medium and large heads each get their own outer, so the helmet stays compact in the sizes most riders wear. At XS and at 3XL the shell is shared with neighbouring sizes, which means a little more padding at the small end and a closer shell at the large end. Try it on wearing the goggles you plan to use.
Strap, EPS and rescue release
The X-Force fastens with a double D-ring on a reinforced strap. It is slower to do up with gloves on than a quick-release buckle, but it holds its adjustment and cannot be knocked open by a branch. Inside, the EPS liner uses several densities to deal with impacts of different severity. Should the worst happen, the emergency release system allows first responders to remove the cheek pads before lifting the helmet, so the head and neck move less.
The reflective stickers in the box are worth applying if you ride road sections at dusk, and the carrying backpack keeps the helmet protected in the van between events.
Road links: noise and draught
Enduro often means a few kilometres of tarmac between sections. The X-Force handles that, but honestly rather than comfortably: without a visor the wind goes round your goggles, it gets loud quickly above country-road speed, and the peak catches air when you turn your head. Earplugs help. For long road stages an adventure helmet with a visor is the better tool.
No visor, no goggles supplied
This is a goggle helmet, and goggles are not in the box. There is also no anti-fog insert, since there is no visor to fit it to. Plan for a pair of off-road goggles that suits the eyeport; LS2 offers its own range for that purpose.
X-Force or X-Force Pro?
Both share shell, weight and accessories. The Pro adds a racing homologation that some sanctioned off-road championships check at scrutineering. This Phantom version is approved to ECE 22.06, which covers road use and non-licensed events. If you are entering a series that asks for the racing approval, the Pro is the helmet to buy. Otherwise this one is identical where it counts.
In the box
- 1x LS2 MX703 X-Force helmet
- 1x additional peak (unbreakable, ultra-flexible)
- 1x hydration tube
- 1x carrying backpack
- 1x set of reflective stickers
Specification
- Model — LS2 MX703 X-Force
- Part number — 467032551
- Colour — Phantom Matt Orange/Red — Phantom graphic in orange and red over carbon, matt
- Homologation — ECE 22.06
- Helmet type — Off-road / motocross helmet
- Shell — Carbon 9K, 4 shell sizes (XS–S / M / L / XL–3XL)
- Weight — 1200 g (±50 g)
- Sizes — XS to 3XL (seven sizes)
- Visor — No visor (goggle helmet); extendable, adjustable peak plus additional unbreakable peak supplied; hydration kit
- Anti-fog — No Pinlock provision listed by LS2
What's includedEverything in the box▼
- 1x LS2 MX703 X-Force helmet
- 1x additional peak (unbreakable, ultra-flexible)
- 1x hydration tube
- 1x carrying backpack
- 1x set of reflective stickers
FitmentBy head size — not by bike▼
Rated. Certified. Lit.
“Scored 76 of 100 for motocross riding. It is strongest on off-road kit and gives up most on price positioning — every point traces back to a documented fact and its source.”
— the Inter-Pace crewApproved to ECE 22.06.
1,200 g — light for this class.
Peak fitted for off-road use.
Suits a intermediate head shape.
A motocross helmet, built for motocross.
Mid-range bracket in the motocross field.
339 € — Mid-range. Hover the bar for each range. Value is scored against the motocross field, not in the abstract.
MX703 X-Force vs —
Compare the grid.
| Leatt Moto 3.5 Jr81 | Leatt Moto 9.581 | Shoei VFX-WR 0681 | Leatt Moto 7.580 | LS2 MX703 X-Force Pro77 | Suomy MR Jump 2.077 | KYT Skyhawk76 | Leatt Moto 8.576 | LS2 MX437 Fast II Mini76 | LS2 MX703 X-Force76 | LS2 MX700 Subverter Evo II74 | LS2 MX708 Fast II72 | Suomy X-Wing72 | MT-Helmets Falcon S68 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inter-Pace Rating | 81/100 | 81/100 | 81/100 | 80/100 | 77/100 | 77/100 | 76/100 | 76/100 | 76/100 | 76/100 | 74/100 | 72/100 | 72/100 | 68/100 |
| Level | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Recommended | Solid |
| Price | 179,95 € | 699,95 € | 539,00 € | 319,95 € | 424,15 € | 355,11 € | 264,45 € | 499,95 € | 101,15 € | CHF 302.86 | 152,15 € | 92,65 € | 156,68 € | 101,96 € |
| Weight | 1,25 kg | 1,25 kg | 1,25 kg | 1,295 kg | 1,2 kg | 1,3 kg | 1,2 kg | 1,305 kg | 1,05 kg | 1,2 kg | 1,3 kg | 1,45 kg | 1,25 kg | 1,35 kg |
| ECE 22.06 | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| FIM racing | — | — | — | — | ✓ | — | — | — | — | — | — | — | — | — |
| Pinlock incl. | — | — | — | ✓ | — | ✓ | ✓ | — | — | — | — | — | ✓ | — |
| Shell | Injected polymer compound (polycarbonate) | Carbon matrix | AIM shell | Injected polymer/composite (polycarbonate per technical file) | Carbon 9K | Tricarboco (carbon-aramid composite) | Tri-composite: Kevlar/aramid, carbon, fibreglass | Composite fibre | KPA (Kevlar-polycarbonate-ABS) | Carbon 9K | KPA (Kevlar-polycarbonate-ABS) | KPA (Kevlar-polycarbonate-ABS) | ADT Advanced Thermoplastic | HIRP injected thermoplastic |
| Ventilation | 8/10 | 10/10 | 8/10 | 8/10 | 8/10 | 8/10 | 5/10 | 8/10 | 8/10 | 8/10 | 8/10 | 8/10 | 5/10 | 6/10 |
| Comfort | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 | 10/10 |
Head to toe.
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.