Accossato front axle sliders PF050 for Ducati Panigale 1299 (2015-2017)
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeFront axle sliders (fork protection)
Part numberPF050
MaterialAluminium and plastic
Pieces2 (one per side)
Fitting kitSpacers, screws and all fitting parts included (Accossato)
ColourBlack
FitmentDucati Panigale 1299 (2015–2017)
Road approvalNone documented, track use only
CheckCompare with the application list before ordering
DescriptionThe whole story▼

The Panigale 1299 took over from the 1199 for 2015 with the largest version of Ducati's Superquadro twin, and many of them are taken to circuits. Anyone who has done a few track days on one knows that the laps are only part of the day. Between sessions the bike goes up on paddock stands, the tyre warmers go on and come off, and it is often in those minutes of lifting and lowering, not on the track, that a superbike ends up on its side. Accossato's PF050 gives the Panigale 1299 of 2015 to 2017 two black front axle sliders.

Key Features

  • Accossato PF050 front axle sliders for the Ducati Panigale 1299, 2015 to 2017
  • Left and right protector in one pack
  • Made of aluminium and plastic, black
  • Accossato supplies spacers, screws and all other fitting parts
  • Sacrificial parts, to be renewed after a heavy impact
  • Same pair listed for the 1299 S, the Panigale V4 and the V4 S
  • No German ABE documented; supplied for track use

Construction and Material Quality

Two protectors make up the PF050, and Accossato combines aluminium with plastic in each of them before finishing both in black. Everything needed to mount them comes along, according to the manufacturer, including spacers and screws. What they can do on a Panigale 1299 is limited but useful: when the bike falls or slides, they are designed to reach the ground before the fork and the front axle area and to take the scraping that would otherwise mark more expensive parts. They can reduce damage; they cannot rule it out. Treat them as wear parts and renew one as soon as it shows a heavy impact.

Paddock Stands and Tyre Warmers

On a track day the Panigale 1299 spends more time standing than moving, and most of that time it stands on paddock stands. The rear stand comes first. A single-sided swingarm needs a stand made for that design, and its pin must be fully engaged before you lift, in one smooth movement, on firm and level ground rather than on the sloping edge of the paddock. The front stand goes on second and comes off first. Warmer cables are a trip hazard for you and for anyone walking past, so route them away from the stand wheels and switch the warmers off before unplugging. When the bike comes down, fold out the side stand beforehand and keep a hand on the bars, or ask a friend to steady the other side. If the 1299 slips off a stand despite all this, the sliders are intended to be the first thing that touches the ground. Check them, and the fork, before the next session.

Fitment and Compatibility

Accossato lists the PF050 for the Panigale 1299 from 2015 to 2017, and we have linked it to those years. No other Accossato protection part is listed for this bike. Interestingly, the same pair is catalogued in our shop not only for the Panigale 1299 S but also for the four-cylinder Panigale V4 and V4 S that followed. Before you order, compare your Panigale 1299 with the application list, or ask us. Once the sliders are fitted, tighten everything to the values in the workshop manual and make sure nothing rubs when the front wheel turns.

Road Approval

We hold neither an ABE nor a test mark for the PF050, and for that reason we list it for use on the track and in competition.

Scope of Delivery

A pair of black PF050 sliders for the front of the bike, with the spacers, screws and other fitting parts Accossato puts in the pack.

Specifications

  • Type: Front axle sliders (fork protection)
  • Part number: PF050
  • Material: Aluminium and plastic
  • Pieces: 2 (one per side)
  • Fitting kit: Spacers, screws and all fitting parts included (Accossato)
  • Colour: Black
  • Fitment: Ducati Panigale 1299 (2015–2017)
  • Road approval: None documented, track use only
  • Check: Compare with the application list before ordering
What's includedEverything in the box▼
  • 2x Accossato front axle slider
FitmentWhich bikes this fits▼
  • Ducati Panigale 1299 (2015–2017)
  • Ducati Panigale 1299 S (2015–2017)
  • Ducati Panigale V4 (2018–2020)
  • Ducati Panigale V4 R (2019–2020)
  • Ducati Panigale V4 S (2018–2019)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.