TK Dischi Freno SBK 6.0 Brake Disc Kit for Aprilia RSV4 / RSV4 1100 Factory / RF / RR (2017–2020)

Built to the exacting standards demanded by MotoGP and World Superbike competition, the TK Dischi Freno SBK 6.0 brake disc kit brings certified, race-proven stopping power to your Aprilia RSV4, RSV4 1100 Factory, RF, or RR. Every disc in this paired kit is manufactured from certified materials and engineered to deliver consistent, fade-resistant performance across both road and track use — with the safety margins that serious riders simply cannot compromise on.

Key Features

• Manufactured from certified materials for maximum safety, structural integrity and long service life — no compromise on the fundamentals that matter most.
• 6.0 mm disc thickness delivers elevated load capacity over standard fitments; verify caliper clearance before fitting, as this dimension exceeds OEM spec.
• Angled drilling pattern optimises material removal and heat dissipation, keeping disc temperatures up to 20% lower than standard brake discs, reducing brake fade and extending pad life.
• Reduced rotating mass translates directly into more agile handling and sharper turn-in response — a measurable gain on track and on twisty roads alike.
• Progressive, modulated braking feel with reduced lever effort, even in wet conditions, giving the rider confident, precise control.
• Choice of inner carrier colour — hard-anodised, black, red or blue — so the kit complements your RSV4's livery. Note: red and blue variants may carry extended lead times.

Race-Derived Engineering

TK Dischi Freno developed the SBK 6.0 series through active involvement in MotoGP, the WorldSBK championship, and the Italian national superbike series. That development programme shaped every aspect of the disc geometry: the angled drilling layout, the 30 mm friction ring width, and the 330 mm diameter (320 mm available as an option) are not arbitrary choices — they are the product of data gathered under genuine race conditions.

The result is a brake disc that remains stable under repeated hard braking from high speed, resisting the thermal cycling that causes cheaper discs to warp or lose bite. Pad wear is actively managed by the optimised hole geometry, which clears gas and debris from the friction surface and keeps the pad compound working at its intended temperature window.

Fitment and Compatibility

This kit is a direct fitment for the following Aprilia models:

• Aprilia RSV4 — 2017, 2018, 2019, 2020
• Aprilia RSV4 1100 Factory — 2017, 2018, 2019, 2020
• Aprilia RSV4 RF — 2017, 2018, 2019, 2020
• Aprilia RSV4 RR — 2017, 2018, 2019, 2020

Because the SBK 6.0 discs measure 6.0 mm in thickness, compatibility with your existing brake calipers should be confirmed prior to installation. If in doubt, contact our team before ordering.

Part Numbers by Finish

• Hard-anodised inner carrier: A06EL_A06ER_SBK6_ha
• Black inner carrier: A06EL_A06ER_SBK6_b
• Red inner carrier: A06EL_A06ER_SBK6_r
• Blue inner carrier: A06EL_A06ER_SBK6_bl

Specifications