TK Dischi Freno SBK GP 7.0 Brake Disc Kit for Ducati Panigale V4/S/R (2018-2024)

Certified Italian materials, MotoGP-derived geometry and a class-leading 7.0 mm rotor thickness — the TK Dischi Freno SBK GP 7.0 brake disc kit delivers the safety margins and outright stopping power that Ducati Panigale V4, V4 S and V4 R riders demand, whether attacking a circuit or pushing hard on public roads.

Key Features

• Manufactured in Italy from certified materials, ensuring traceable quality control and consistent metallurgical standards for rider safety.
• 7.0 mm rotor thickness provides exceptional thermal mass and durability under sustained track braking — verify compatibility with your brake calipers before fitting.
• Angled drilling pattern reduces heat build-up by up to 20% compared with standard brake discs, cutting fade and keeping braking performance consistent lap after lap.
• Reduced rotating unsprung mass at the front wheel sharpens turn-in response and improves overall handling agility.
• Extended brake pad life achieved by more homogeneous pad contact and reduced braking pressure requirements, even in wet conditions.
• Choice of inner carrier colour — hard-anodised, black, red or blue — lets you match the discs to your Panigale's livery without compromising specification.

Performance & Build Quality

The SBK GP 7.0 series draws its engineering brief directly from Superbike World Championship and MotoGP programmes. The 330 mm diameter friction ring — also available in a 320 mm variant — is machined to a 30 mm ring width, maximising pad contact area while keeping the overall package within the V4's front-end geometry. The angled drilling layout is not merely aesthetic: each aperture is positioned to channel hot gases away from the pad face, preserve structural integrity under repeated heat cycling and clear debris in mixed conditions. Hard-anodised and black carriers ship from stock; red and blue anodised carriers may carry extended lead times — please enquire at the time of ordering.

Safety & Certification

Every disc in the SBK GP 7.0 range is produced from certified steels and alloys sourced within Italy, with material traceability built into the manufacturing process. The homogeneous braking behaviour — consistent bite point, predictable modulation and reduced sensitivity to water contamination — translates directly into rider confidence and safety. The increased rotor thickness relative to OEM specifications provides a greater wear reserve, reducing the risk of premature disc failure under demanding use.

Fitment & Compatibility

This kit is developed specifically for the following models:

• Ducati Panigale V4 — 2018 to 2024
• Ducati Panigale V4 S — 2018 to 2024
• Ducati Panigale V4 R — 2018 to 2024

The 7.0 mm rotor thickness exceeds standard OEM dimensions. Always confirm clearance with your installed brake calipers before fitting. If in doubt, contact Inter-Pace for compatibility advice.

Specifications

• Rotor diameter: 330 mm (320 mm optional)
• Rotor thickness: 7.0 mm
• Friction ring width: 30 mm
• Scope of delivery: 2 brake discs (left and right)
• Part numbers by finish — hard-anodised: D08EL_D08ER_SBKGP_ha | black: D08EL_D08ER_SBKGP_b | red: D08EL_D08ER_SBKGP_r | blue: D08EL_D08ER_SBKGP_bl