{"product_id":"talos-s78-monoblock-p4-34-34-front-right-brake-caliper-100mm","title":"Talos S78 Monoblock P4 34\/34 Front Right Brake Caliper 100mm | X78.100.HD.R","description":"\u003cp\u003eThe Talos S78 Monoblock P4 is a serious track-day upgrade that delivers genuine racing-grade braking performance without the complexity of a two-piece caliper. Machined as a single-piece monoblock body and weighing just 583 g, the S78 gives ambitious riders a tangible improvement in feel, modulation and fade resistance — session after session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eOne-piece monoblock aluminium body for outstanding rigidity and minimal flex under heavy braking loads\u003c\/li\u003e\n\u003cli\u003eFour 34 mm titanium pistons with TIN (titanium nitride) coating for consistent performance under extreme thermal stress\u003c\/li\u003e\n\u003cli\u003eHard-anodised surface finish resists corrosion and wear across repeated high-intensity track sessions\u003c\/li\u003e\n\u003cli\u003eLightweight at 583 g — an immediate unsprung weight saving over most OEM calipers\u003c\/li\u003e\n\u003cli\u003e100 mm mounting pitch and 30 mm offset for broad fitment across a wide range of performance motorcycles\u003c\/li\u003e\n\u003cli\u003eRight-hand front fitment — pairs with the matching left-side S78 for a complete front upgrade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMonoblock Construction\u003c\/h2\u003e\u003cp\u003eMachining the caliper body from a single billet rather than bolting two halves together eliminates the joint that most calipers flex through under peak load. The result is a measurably stiffer structure that translates directly into a firmer, more progressive lever feel. At 583 g for the 100 mm version, the S78 achieves this rigidity without adding unwanted mass to the front end.\u003c\/p\u003e\u003ch2\u003eTitanium Pistons with TIN Coating\u003c\/h2\u003e\u003cp\u003eEach of the four 34 mm pistons is machined from titanium and coated with titanium nitride. Titanium's low thermal conductivity keeps heat from migrating from the pad into the fluid, protecting against fade during long or repeated braking zones. The TIN surface reduces friction within the caliper bore, easing piston retraction and extending seal life — practical benefits that matter as much on a busy track day as they do in a race.\u003c\/p\u003e\u003ch2\u003eHard-Anodised Finish\u003c\/h2\u003e\u003cp\u003eThe hard-anodising process creates a dense oxide layer that is far harder and more abrasion-resistant than standard anodising. On a track caliper exposed to brake dust, stone chips and aggressive cleaning, this surface protection maintains the caliper's integrity and appearance across a long service life.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe X78.100.HD.R is designed for front-right fitment with a 100 mm radial mounting pitch and a 30 mm offset. The wide compatibility list covers a broad range of current and recent performance motorcycles, including:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia: RSV4, RSV4 R, RSV4 RR, RSV4 RF, RSV4 1100, RSV4 1100 Factory, RS 660, RS 457\u003c\/li\u003e\n\u003cli\u003eBMW: S1000RR, M1000RR, HP4, HP4R\u003c\/li\u003e\n\u003cli\u003eDucati: 848, 899, 959, 1199, 1199 S, 1199 R, 1299, 1299 S, V4, V4 S, V4 R\u003c\/li\u003e\n\u003cli\u003eHonda: CBR 600 RR, CBR 1000 RR, CBR 1000 RR-R\u003c\/li\u003e\n\u003cli\u003eKawasaki: ZX-6R, ZX-10 R, ZX-10 RR, ZX-4 RR, Ninja 400\u003c\/li\u003e\n\u003cli\u003eKTM: RC 390, RC8 1190\u003c\/li\u003e\n\u003cli\u003eMV Agusta: F3, F4\u003c\/li\u003e\n\u003cli\u003eSuzuki: GSX-R 600, GSX-R 750, GSX-R 1000\u003c\/li\u003e\n\u003cli\u003eTriumph: Daytona 675, Daytona 675 R, Daytona 765, Daytona 765 Moto 2, Street Triple 765 R, Street Triple 765 RS\u003c\/li\u003e\n\u003cli\u003eYamaha: R3, R6, R7, R9, R1, R1M\u003c\/li\u003e\n\u003cli\u003eBimota: KB998 Rimini\u003c\/li\u003e\n\u003cli\u003eCFMOTO, QJMotor, and other models — verify mounting pitch and offset before ordering\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAlways confirm rotor diameter, mounting pitch and offset against your specific model and year before fitting. Brake pads are not included.\u003c\/p\u003e\u003ch2\u003eImportant Notice\u003c\/h2\u003e\u003cp\u003eThe Talos S78 is designed and approved for closed-circuit racing use only. It is not homologated for road use. Fitting this caliper to a road-registered motorcycle may render the vehicle non-compliant with road traffic regulations.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: X78.100.HD.R\u003c\/li\u003e\n\u003cli\u003eMounting pitch: 100 mm\u003c\/li\u003e\n\u003cli\u003eOffset: 30 mm\u003c\/li\u003e\n\u003cli\u003ePosition: front right\u003c\/li\u003e\n\u003cli\u003ePiston configuration: P4 (4 pistons)\u003c\/li\u003e\n\u003cli\u003ePiston diameter: 34\/34 mm\u003c\/li\u003e\n\u003cli\u003ePiston material: titanium, TIN-coated\u003c\/li\u003e\n\u003cli\u003eBody construction: monoblock\u003c\/li\u003e\n\u003cli\u003eSurface finish: hard anodised\u003c\/li\u003e\n\u003cli\u003eWeight: 583 g\u003c\/li\u003e\n\u003cli\u003eBrake pads: not included\u003c\/li\u003e\n\u003cli\u003eIntended use: track\/racing only — not road-legal\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Talos","offers":[{"title":"Default Title","offer_id":53169024041226,"sku":"SY-TALOSS78-E7FE2B-01","price":1122.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/front_4a73e7a3-11b2-40de-8a63-c0942608123f.png?v=1780819447","url":"https:\/\/inter-pace.com\/products\/talos-s78-monoblock-p4-34-34-front-right-brake-caliper-100mm","provider":"Inter-Pace","version":"1.0","type":"link"}