{"product_id":"oz-piega-forged-aluminium-wheel-set-honda-cbr-1000-rr-sp1-sc77","title":"OZ Piega Forged Aluminium Wheel Set Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)","description":"\u003cp\u003eConceived in OZ's Superbike Racing division and refined through years of circuit competition, the Piega wheel set brings genuine race pedigree to the Honda CBR 1000 RR and SP1 SC77. Forged from premium-grade aluminium and shaped into the Piega's iconic five-spoke silhouette, this set delivers a measurable reduction in rotating mass that transforms steering response, mid-corner agility and overall composure — whether you are threading traffic on the road or chasing lap times at a trackday.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design born in OZ's SBK Racing department — proven on the world stage before reaching the road.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction offers an exceptional strength-to-weight ratio, reducing unsprung and rotating mass for sharper turn-in and faster direction changes.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: 1x front wheel (3.50 x 17) and 1x rear wheel (5.50 x 17), direct replacements for the factory Honda CBR 1000 RR \/ SP1 SC77 (2017-2019) wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality-grade bearings, aluminium angled valves and spacer washers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eIncludes a rear sprocket carrier — note that the original Honda rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards, ensuring long-term reliability on road and track alike.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eThe Piega name carries real history in motorcycle racing. Developed by OZ's dedicated SBK Racing division, the five-spoke architecture was engineered to shed weight without compromising structural integrity — a balance that defines every OZ Racing wheel. Each spoke is profiled to maximise rigidity along the primary load paths while keeping material, and therefore rotating inertia, to an absolute minimum.\u003c\/p\u003e\u003cp\u003eThe finish options — gloss black anodised, techno black anodised and techno gold anodised — give the Piega a presence that complements the CBR 1000 RR's aggressive bodywork. Anodising is not merely cosmetic: the process hardens the aluminium surface, improving resistance to corrosion, abrasion and the thermal cycling that comes with sustained hard riding. The result is a wheel that looks as purposeful as it performs, and holds its appearance season after season.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReduced rotating mass at both ends of the motorcycle has a compounding effect on dynamic behaviour. Steering loads drop, the front wheel follows surface changes more faithfully, and the chassis reacts to body inputs with greater immediacy. At higher speeds the five-spoke structure maintains lateral stiffness, keeping tyre contact patches stable under braking and through fast direction changes. Whether the CBR 1000 RR is used primarily on public roads or committed to regular track use, the Piega set provides a tangible upgrade over the factory-fitted wheels.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Honda CBR 1000 RR and CBR 1000 RR SP1 (SC77 frame code), model years 2017 to 2019. The wheels replace the original units directly. Please note that the standard Honda rear sprocket is not compatible with the OZ sprocket carrier supplied; a suitable aftermarket rear sprocket must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3212HO35 (front) + P6245HO60 (rear)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacer washers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403827466,"sku":"P3212HO35+P6245HO60_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403860234,"sku":"P3212HO35+P6245HO60_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403893002,"sku":"P3212HO35+P6245HO60_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_f0ae0019-79b2-462b-896b-fb665c6167a0.png?v=1780797075","url":"https:\/\/inter-pace.com\/products\/oz-piega-forged-aluminium-wheel-set-honda-cbr-1000-rr-sp1-sc77","provider":"Inter-Pace","version":"1.0","type":"link"}