{"product_id":"ohlins-shock-spring-115-n-mm-150-mm-57-mm-01093-41","title":"Öhlins Shock Spring 115 N\/mm \/ 150 mm \/ Ø 57 mm – 01093-41","description":"\u003cp\u003eÖhlins part number 01093-41 is a shock absorber spring rated at 115 N\/mm, 150 mm long with a 57 mm inner diameter. A rear spring matched to rider and load keeps the chassis attitude where the factory intended it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMeasured spring rate 115 N\/mm\u003c\/li\u003e\n\u003cli\u003e72 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01093-41\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eFree length 150 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eThe finish is applied after setting, which means the coating does not affect the rate. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly. The unit is rebuildable: seals, shims and oil are catalogue items, not a reason to buy a new one.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eAt 150 mm free length and 57 mm inner diameter, this spring is dimensionally interchangeable with anything of the same size — the rate is what makes it a different part.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eA firm rate keeps the fork high in its stroke under braking, which preserves the geometry when the front is loaded hard. Support under braking improves; small-bump comfort gives a little back. Heavier riders, two-up use and track days all push the choice towards this end. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003eA rear spring is the cheapest part of the suspension and the one that decides the most. Rear spring rate sets ride height and static sag, and those two decide the chassis attitude before any damping click matters. A shock absorber spring carries the whole rear of the machine through a linkage that multiplies its rate several times over — which is why the number on the spring looks so much larger than a fork rate.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eRate is the variable that depends on the rider, not on the machine. Two people on the same bike may well want two different numbers. Ask us with the machine and rider weight and we will tell you which rate in this size to take. The safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eSpring preload spacers may need adjusting to keep the installed length correct. Torque the fork caps to the manufacturer's figure; the springs change nothing about the assembly torque. The job needs no special tools beyond a fork spring compressor and a measuring rod for the oil level.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: no separate certificate. The spring changes the rate, not the construction of the fork, and is treated as a service part.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins suspension rewards careful fitting. We recommend having the work done by an authorised Öhlins service centre — and we are one ourselves: we fit, service and set up Öhlins components in house. If you would like us to handle the installation, just ask and we will quote it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01093-41\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 115 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 150 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 72 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645339721994,"sku":"01093-41","price":78.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_5175a3cd-8608-48a1-ab91-1912cba76af9.png?v=1788866665","url":"https:\/\/inter-pace.com\/products\/ohlins-shock-spring-115-n-mm-150-mm-57-mm-01093-41","provider":"Inter-Pace","version":"1.0","type":"link"}