{"product_id":"ohlins-shock-spring-100-n-mm-170-mm-57-mm-01092-34","title":"Öhlins Shock Spring 100 N\/mm \/ 170 mm \/ Ø 57 mm – 01092-34","description":"\u003cp\u003eÖhlins part number 01092-34 is a shock absorber spring rated at 100 N\/mm, 170 mm long with a 57 mm inner diameter. A rear spring matched to rider and load keeps the chassis attitude where the factory intended it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFree length 170 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003e83 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 100 N\/mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 01092-34\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow Öhlins Makes Them\u003c\/h2\u003e\u003cp\u003eÖhlins machines its own critical components instead of buying them in, and the tolerances are where the money goes. Every Öhlins dealer can re-valve the unit, because the shim stack is a documented, serviceable assembly. Production is Öhlins' own in Sweden, and the tolerance on the rate is what separates these from a generic replacement.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eFree length 170 mm, inner diameter 57 mm, rate 100 N\/mm — those three figures define the part completely.\u003c\/p\u003e\u003ch2\u003eChoosing 100 N\/mm\u003c\/h2\u003e\u003cp\u003eSupport under braking improves; small-bump comfort gives a little back. This end of the range suits heavier riders, two-up use, or a machine ridden hard enough that fork dive becomes the limit. A firm rate holds the chassis attitude when the front or rear is loaded hard. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003eProgressive springs change rate through the stroke, which suits machines with little travel and a lot of load. Preload adjusts sag within a rate; it does not change the rate, and no amount of it will rescue a spring that is wrong. On a linkage-equipped machine the wheel moves several millimetres for every millimetre the damper moves, and the spring rate has to account for that ratio.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload. Nothing about the installation changes across a rate range: the mounting, the length and the bore stay the same. Öhlins builds springs to dimensions rather than to model lists, so the question is always the same: does the diameter fit, does the length fit, and is the rate right for the rider?\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eÖhlins part numbers are stamped on the packaging rather than the spring, so keep the label with the setup notes. Any suspension workshop can fit these; the fork does not need to leave the bike for long. Work on both legs in one session so the fork stays symmetrical.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins suspension rewards careful fitting. We recommend having the work done by an authorised Öhlins service centre — and we are one ourselves: we fit, service and set up Öhlins components in house. If you would like us to handle the installation, just ask and we will quote it with the order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 01092-34\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 100 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 170 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 83 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645334642954,"sku":"01092-34","price":78.56,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_a363acd5-d9b4-436b-be11-10a0b330f256.png?v=1788866639","url":"https:\/\/inter-pace.com\/products\/ohlins-shock-spring-100-n-mm-170-mm-57-mm-01092-34","provider":"Inter-Pace","version":"1.0","type":"link"}