{"product_id":"ohlins-nix-30-cartridge-kit-fgk-229-ducati-panigale-959","title":"Öhlins NIX 30 Cartridge Kit FGK 229 for Ducati Panigale 959 (2016–2019)","description":"\u003cp\u003eThe Öhlins NIX 30 Cartridge Kit FGK 229 is a factory-engineered fork upgrade developed specifically for the Ducati Panigale 959 (2016–2019), bringing the legendary Swedish suspension heritage of Öhlins directly into the OEM fork legs of your machine. The 30 mm cartridge architecture transforms the stock fork into a precision-tunable unit worthy of both demanding road use and serious track work.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDedicated fitment for the Ducati Panigale 959 (2016–2019) — a direct, purpose-engineered solution rather than an adapted universal kit\u003c\/li\u003e\n\u003cli\u003e30 mm cartridge system delivers substantially improved damping consistency and fork stability under braking and mid-corner loads\u003c\/li\u003e\n\u003cli\u003eCompression damping and its adjuster are housed in the left fork leg; rebound damping and its adjuster sit in the right leg — keeping each circuit clean and independent\u003c\/li\u003e\n\u003cli\u003eAll adjustments — compression, rebound and spring preload — are accessible at the fork cap, so setup changes take seconds at the trackside\u003c\/li\u003e\n\u003cli\u003eSprings from the 08790 series are ordered separately, allowing you to select the spring rate suited to your weight, riding style and circuit\u003c\/li\u003e\n\u003cli\u003eIncludes an installation manual; for best results Öhlins recommends fitting by an authorised Öhlins Service Centre\u003c\/li\u003e\n\u003cli\u003eGerman ABE approval (type approval for road use in Germany) confirmed for this fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eÖhlins has been the suspension of choice at the highest levels of Grand Prix and Superbike racing for over four decades. The NIX 30 range carries that pedigree into a bolt-in cartridge format that retains the original fork outer tubes, preserving the visual lines of the Panigale while fundamentally changing what the chassis can do. The cartridge internals are machined and assembled to Öhlins' exacting Swedish tolerances, and the engineering logic — separating compression and rebound circuits into dedicated legs — mirrors the architecture found on full factory Superbike equipment.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eThe Ducati Panigale 959 sits in a demanding middle ground: quick enough to expose the limitations of a standard fork under hard use, yet ridden daily by owners who need consistent, predictable behaviour on imperfect road surfaces. The FGK 229 addresses both demands. On track, the independently adjustable compression and rebound circuits let you dial the fork precisely to a given circuit's braking zones and corner profiles. On the road, the improved damping linearity smooths out the harshness that can come from a standard cartridge under repeated impacts, keeping the front tyre loaded and the steering neutral.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis kit is confirmed to fit the following model:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018 and 2019\u003c\/li\u003e\n\u003cli\u003eGerman ABE road approval included for this fitment\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSprings are not included and must be ordered separately from the Öhlins 08790 series. If you are unsure which spring rate to select, the installation manual provides guidance, and any authorised Öhlins Service Centre can advise based on your all-up weight and intended use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: FGK 229\u003c\/li\u003e\n\u003cli\u003eFork travel: 120 mm\u003c\/li\u003e\n\u003cli\u003eCartridge diameter: 30 mm\u003c\/li\u003e\n\u003cli\u003eSpring series: 08790 (sold separately)\u003c\/li\u003e\n\u003cli\u003eCompression adjuster location: left fork leg\u003c\/li\u003e\n\u003cli\u003eRebound adjuster location: right fork leg\u003c\/li\u003e\n\u003cli\u003ePreload adjustment: fork cap\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016–2019)\u003c\/li\u003e\n\u003cli\u003eRoad approval: ABE (Germany)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53168754622730,"sku":"FGK 229","price":1345.66,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/NIXFGK_ac17ac5e-b5e7-4623-94c8-4f7df17d6a8b.png?v=1780813609","url":"https:\/\/inter-pace.com\/products\/ohlins-nix-30-cartridge-kit-fgk-229-ducati-panigale-959","provider":"Inter-Pace","version":"1.0","type":"link"}