{"product_id":"lightech-wheel-axle-sliders-kit-ducati-hypermotard-821-2013-2018-wapdu403","title":"LighTech Wheel Axle Sliders Kit Ducati HYPERMOTARD 821 (2013-2018) – WAPDU403","description":"\u003cp\u003eThere is nothing cosmetic between a HYPERMOTARD 821 and the ground. That is what the WAPDU403 is for: 200 g of nylon and Ergal standing between the axle of a HYPERMOTARD 821 and the ground. It is offered in 2 colours: Black, Red. The kit costs less than an hour of workshop time on a HYPERMOTARD 821.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNylon outer body on the WAPDU403: high elasticity, so it absorbs rather than shatters on a HYPERMOTARD 821\u003c\/li\u003e\n\u003cli\u003eThe LighTech logo is screen-printed into the WAPDU403 nylon, not stuck on afterwards\u003c\/li\u003e\n\u003cli\u003eMetric hardware throughout the WAPDU403, so a HYPERMOTARD 821 workshop needs nothing special\u003c\/li\u003e\n\u003cli\u003eBolts to the standard HYPERMOTARD 821 fixing points — no drilling, no adapter plates\u003c\/li\u003e\n\u003cli\u003eBlack, Red — one WAPDU403 kit, 2 ways to match the HYPERMOTARD 821\u003c\/li\u003e\n\u003cli\u003eThe WAPDU403 adds 200 g to a HYPERMOTARD 821 and changes nothing about how it steers\u003c\/li\u003e\n\u003cli\u003eDesigned around the HYPERMOTARD 821 specifically rather than adapted from another model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow Axle Protection Works\u003c\/h2\u003e\n\u003cp\u003eAn axle protector works by standing further out than the part it defends. The WAPDU403 puts the elastic material outside and the structural material inside. The coloured insert is sold in pairs, so a damaged HYPERMOTARD 821 is back to standard for small money.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eLighTech lists the WAPDU403 for the Ducati HYPERMOTARD 821. No modification to the HYPERMOTARD 821 is involved — the standard points take the kit.\u003c\/p\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eLighTech moulds the outer shell of the WAPDU403 in nylon because it gives before it breaks. The insert is Ergal: known for strength, chosen here for its weight. The design assumes the WAPDU403 will be used, and makes the used part the cheap one.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eWhat arrives is a full WAPDU403 set at 200 g, ready to go onto the HYPERMOTARD 821. Nothing in the WAPDU403 box is specific to a colour, so a later change of finish is just the visible part.\u003c\/p\u003e\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eFitting the WAPDU403 to a HYPERMOTARD 821 is a hand-tool job on a cold engine. Leave the final torque until the position is confirmed on the HYPERMOTARD 821. Colour is the only choice to make — 2 of them, Black, Red, all fitting the HYPERMOTARD 821 the same way.\u003c\/p\u003e\n\u003ch2\u003eApproval and Road Use\u003c\/h2\u003e\n\u003cp\u003eThere is no type-approval certificate for the WAPDU403 and we do not claim one. A protector fitted outside the outline of the HYPERMOTARD 821 is something a German inspector may question. Check with your inspection body if the HYPERMOTARD 821 sees public roads. For circuit use the point is moot.\u003c\/p\u003e\n\u003ch2\u003eTechnical Data\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand\u003c\/em\u003e: LighTech\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number\u003c\/em\u003e: WAPDU403\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eType\u003c\/em\u003e: Wheel axle slider kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eOuter body\u003c\/em\u003e: Nylon, screen-printed LighTech logo\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInsert\u003c\/em\u003e: Machined Ergal, colour-matched\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePosition\u003c\/em\u003e: Front and rear axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours\u003c\/em\u003e: 2 — Black, Red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eWeight\u003c\/em\u003e: 200 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment\u003c\/em\u003e: Ducati HYPERMOTARD 821 (2013 to 2018)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval\u003c\/em\u003e: None supplied\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"LighTech","offers":[{"title":"Black","offer_id":53858152808714,"sku":"WAPDU403NER","price":41.02,"currency_code":"EUR","in_stock":true},{"title":"Red","offer_id":53858152874250,"sku":"WAPDU403ROS","price":41.02,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/v_WAP_2_NER_6ac1a044-bfc2-4f82-8539-2987df503292.png?v=1791199133","url":"https:\/\/inter-pace.com\/products\/lightech-wheel-axle-sliders-kit-ducati-hypermotard-821-2013-2018-wapdu403","provider":"Inter-Pace","version":"1.0","type":"link"}