KYT R1R Racing Helmet Carbon Accelerator Matte Orange Y6R10001
Prices for Germany include VAT · Shipping calculated at checkout
Inside the EU — no customs duties will apply.
Questions? Just reach out — our team will help you right away.
Size chart KYT KX-1/TT-Revo/R1R-Racing/R2R/NZ-Race
| Size | Head circumference (cm) | Head circumference (inch) |
|---|---|---|
| XS | 53–54 cm | 20.9–21.3 in |
| S | 55–56 cm | 21.7–22.0 in |
| M | 57–58 cm | 22.4–22.8 in |
| L | 59–60 cm | 23.2–23.6 in |
| XL | 61–62 cm | 24.0–24.4 in |
| XXL | 63–64 cm | 24.8–25.2 in |
How to measure your helmet size correctly: To find the right helmet size, measure your head circumference with a flexible tape measure.
It is important that the tape measure runs around the widest part of the head – only then will you get a correct result.
Place the tape measure at the front, about 1–2 cm above the eyebrows, and run it along the sides above the ears.
At the back, the tape must run over the largest part of the back of the head (not too low on the neck). The tape may run slightly at an angle – what matters is that it sits all the way around the largest points of the head.
Make sure the tape measure sits snugly but does not dig in. Measure 2–3 times for the most accurate result. You can then compare the measured value in centimetres (cm) with our size chart.
Tips for an accurate result
- Keep hair flat (e.g. do not measure over a voluminous hairstyle)
- Keep the tape horizontal, i.e. along the largest circumference
- Do not measure too loosely
- For values between two sizes:
→ usually choose the larger size (depending on helmet model / fit)
Important note on fit
The right helmet should fit firmly without causing uncomfortable pressure points.
A new helmet may feel a little tighter at first, as the inner lining adapts slightly over time.
- Worldwide shipping
- Genuine parts & verified quality
- Personal email support
- 14-day returns — in stock ships within 24h
Shipping & Returns
We ship with DHL and FedEx — express on request. If an item is in stock, express delivery can often go out within 1 business day. Standard delivery takes about 2–5 business days domestically and usually around a week worldwide. Please check the available shipping options and delivery times in your cart, as we offer several carriers depending on the country.
Returns must be registered in advance by email and are possible in line with our cancellation policy (14-day return request + 14-day return window after approval). Please note: unregistered returns are not accepted. You'll find all details on conditions, exceptions and refunds in our cancellation policy.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details and have no access to your credit card information.
The KYT R1R in Carbon Accelerator Matte Orange delivers genuine race-bred performance in a package that works just as hard on your Sunday morning road ride as it does on a trackday. Weighing approximately 1,450 g in size M, the tricomposite shell — woven from carbon, aramid fibres and fibreglass — keeps fatigue at bay on long days in the saddle, while the ECE 22.06 homologation means it meets the latest European safety standards for both road and circuit use.
Key Features
- Tricomposite shell (carbon, aramid fibres, fibreglass) for an outstanding strength-to-weight ratio at an accessible price point
- ECE 22.06 homologated — legal for road use across Europe and accepted at the vast majority of track days
- Racing visor with roto-translation mechanism, metal racing lock and tool-free swap for fast visor changes between conditions
- PINLOCK MaxVision 70 lens included in the box, keeping your vision clear in cold or humid weather from day one
- Hydrocool removable and washable interior with quick-release cheek pads for emergency extraction
- Speaker cut-outs in the cheek pads make the R1R compatible with most Bluetooth intercom systems
- Ready for glasses wearers thanks to dedicated spectacle channels in the liner
Shell Construction and Safety
KYT's tricomposite layup combines the stiffness of carbon with the energy-absorbing qualities of aramid fibres and the cost-effectiveness of fibreglass. The result is a shell that punches well above its weight class — resisting deformation under impact while keeping the overall mass low enough that you barely notice it on a two-hour motorway stint. Every R1R shell is manufactured to ECE 22.06, the current gold standard for helmet homologation in Europe.
Visor Technology
The wide-aperture racing visor is optically clear to Class 1 standard, scratch-resistant and UV-protected. The roto-translation opening mechanism — borrowed directly from competition use — lifts the visor cleanly away from the shell so it clears even at extreme lean angles without snagging. Swapping visors for a tinted lens before a summer trackday takes seconds and requires no tools. The included PINLOCK MaxVision 70 anti-fog insert means misting is a non-issue during wet commutes or cool morning starts.
Interior Comfort
The Hydrocool lining wicks moisture away from the skin quickly, keeping the environment inside the helmet noticeably cooler and drier than a conventional textile liner. Everything is fully removable and machine washable, so the helmet stays fresh across a full season of regular use. The quick-release cheek pads are an important safety feature: in an emergency, first responders can remove them in seconds to assist helmet removal without twisting the rider's neck.
Ventilation and Aerodynamics
Multiple intake vents channel fresh air through the shell and across the EPS liner, exhausting through the integrated rear spoiler. The aerodynamic profile reduces lift and buffeting at higher speeds, keeping the helmet stable and reducing neck strain on fast A-roads or circuit straights. The practical benefit for everyday riders is a helmet that stays quiet and settled at motorway speeds without demanding constant muscular correction.
Fitment and Compatibility
The KYT R1R Carbon Accelerator Matte Orange (part number Y6R10001) is a universal full-face helmet suitable for any motorcycle rider seeking ECE 22.06 certified protection. It is not model-specific and fits any rider whose head circumference falls within the KYT R1R size range. Use the table below to find your correct size.
| Size | XS | S | M | L | XL | XXL |
|---|---|---|---|---|---|---|
| Head circumference (cm) | 53–54 | 55–56 | 57–58 | 59–60 | 61–62 | 63 |
Measure your head approximately 2 cm above your eyebrows. If you fall between two sizes, choose the larger of the two.
Specifications
- Model: KYT R1R
- Part number: Y6R10001
- Colour / finish: Accelerator Matte Orange
- Homologation: ECE 22.06
- Shell: Tricomposite (carbon, aramid fibres, fibreglass)
- Weight: approx. 1,450 g ± 50 g (size M)
- Visor: Class 1 optical quality, scratch-resistant, UV-protected, roto-translation mechanism, metal racing lock, tool-free removal
- Anti-fog: PINLOCK MaxVision 70 included
- Liner: Hydrocool, fully removable and washable; quick-release cheek pads
- Closure: double-D ring
- Intercom: speaker-ready (cut-outs in cheek pads)
- Glasses: ready for glasses wearers
- Use: road and track
- Accessories included: breath guard, nose guard, spoiler
| Model | R1R |
|---|---|
| Part number / SKU | Y6R10001 |
| Colour / finish | Accelerator Matte Orange |
| Homologation | ECE 22.06 |
| Helmet type / intended use | Racing helmet / sports road, trackday and racing-oriented use |
| Shell | Tricomposite shell (carbon, aramid fibres, fibreglass) |
| Weight | approx. 1,450 g ± 50 g (size M) |
| Visor | Racing visor with roto-translation mechanism, metal racing lock, tool-free removal |
| Bluetooth / intercom compatible | Yes, conditionally compatible / prepared (speaker cut-outs in cheek pads) |
| Suitable for glasses wearers | Yes ("Wearable Glasses" / "Ready for glasses") |
-
1x helmet
-
1x clear visor
-
1x Pinlock
-
Sticker set
-
Additional accessories (helmet bag)
Fitment data coming soon.
No reviews yet.
Build your kit
Gear up your R1R.
Add the parts made for this helmet — your total updates live.
helmet only
Your helmet is always included · one Pinlock comes free · pick your size in the buy box above
// KYT
KYT R1R Racing Helmet Carbon Accelerator Matte Orange Y6R10001
Tech specs
- Model
- R1R
- Part number / SKU
- Y6R10001
- Colour / finish
- Accelerator Matte Orange
- Homologation
- ECE 22.06
- Helmet type / intended use
- Racing helmet / sports road, trackday and racing-oriented use
- Shell
- Tricomposite shell (carbon, aramid fibres, fibreglass)
- Weight
- approx. 1,450 g ± 50 g (size M)
- Visor
- Racing visor with roto-translation mechanism, metal racing lock, tool-free removal
- Bluetooth / intercom compatible
- Yes, conditionally compatible / prepared (speaker cut-outs in cheek pads)
- Suitable for glasses wearers
- Yes ("Wearable Glasses" / "Ready for glasses")
// Support
Frequently asked questions
Shipping & delivery
Estimate your shipping
Get the real shipping cost for this item to your address — the same rates as checkout.