Motocorse Chain Tensioner Kit with Brake Caliper Bracket and Brembo P2-30 69.5 mm XA6H530 – Ducati Panigale V4/S 2025-2026

If you want your Ducati Panigale V4 or V4S to perform as well as it looks, this Motocorse Complete Chain Tensioner Slider Kit is one of the most complete and practical upgrades you can make. Developed exclusively for the 2025-2026 Panigale V4 and V4S, it is the only kit on the market that allows fitment of a Brembo Racing radial rear brake caliper with a 69.5 mm axle spacing — giving you genuine racing hardware in a package that installs as easily as a standard replacement part.

Key Features

• Right-side chain tensioner slider machined from solid Anticorodal aluminium on 5-axis CNC equipment, with integrated Brembo Racing radial caliper bracket (69.5 mm axle spacing)
• Left-side slider also CNC-machined from solid Anticorodal aluminium for a perfectly matched pair
• Includes Brembo Radial Racing P2-30 brake caliper (part number XA6H530) fitted with Brembo brake pads 07934040
• Two dedicated Motocorse titanium bolts for securing the brake caliper — weight saving built in from the start
• Anodised finish available in five colours: silver, black, red, gold, and blue — coordinate with your existing kit or make a statement
• 100% plug-and-play design: direct replacement for the OEM parts, no modifications required, ready to ride immediately

Everyday Usability — Race Hardware Without the Complexity

Upgrading to Brembo Racing rear brake hardware has historically meant fabricating custom brackets or compromising on fit. This Motocorse kit removes that barrier entirely. The integrated caliper bracket is machined as part of the right-side tensioner slider itself, so the whole assembly goes on in the same time it takes to swap the standard components. For riders who use their Panigale V4 or V4S on both road and track, that means no workshop hours lost and no specialist knowledge required — just a direct, clean installation that delivers measurable improvements in braking feel and rear-end composure from the first ride.

The Anticorodal aluminium used throughout is a high-strength, corrosion-resistant alloy favoured in motorsport for its excellent strength-to-weight ratio. Combined with the titanium caliper bolts included in the kit, the result is a meaningful reduction in unsprung weight over the OEM setup — weight that directly influences how the rear suspension responds under braking and over mid-corner bumps.

Motocorse Craftsmanship

Motocorse is an Italian manufacturer with a reputation built on tight tolerances, motorsport-derived engineering, and an aesthetic that complements Ducati's own design language rather than clashing with it. Every component in this kit is produced to the same standard as the parts you would find on a factory-supported race machine. The anodised surface treatment is not merely cosmetic — it adds a hard, wear-resistant layer that protects the aluminium in the kind of environment a rear wheel area encounters: road grime, chain lubricant, and heat cycles from repeated braking.

What Is Not Included

Please note the following items are not supplied with this kit and must be sourced separately if required:

• Titanium bolt for the phonic wheel sensor
• Two grub screws for the chain tensioner with matching titanium nuts (colour-matched part numbers: Blue 102145050L, Silver 102145050S, Black 102145050B, Red 102145050R, Gold 102145050G)

Fitment & Compatibility

This kit is engineered specifically for the following motorcycles:

• Ducati Panigale V4 — model years 2025 and 2026
• Ducati Panigale V4S — model years 2025 and 2026

It is not designed for earlier V4 generations or other Ducati models. If you are unsure whether this kit suits your specific build, please contact us before ordering.

Specifications