K-Tech Fork Travel Indicator for Ducati Panigale 899 (2013–2016) – 25K-028B

Dialling in suspension geometry starts with knowing exactly how much fork travel you are using. The K-Tech 25K-028B fork travel indicator fits directly over the fork leg of the Ducati Panigale 899 without removing the forks from the bike, giving you an immediate, accurate read of fork stroke consumed during a session.

Key Features

• Fits over the fork leg while the forks remain installed — no strip-down required for a quick setup check
• 43 mm inner diameter machined to suit the Panigale 899 fork tube precisely
• Provides an exact measurement of fork travel used, so you can identify bottoming, excess travel or under-utilised stroke at a glance
• Designed by K-Tech Suspension, a marque trusted at World Superbike and British Superbike level for suspension development
• Lightweight construction adds negligible mass while delivering actionable data for road and track setup alike

Precision Suspension Setup, Simplified

Whether you are chasing the perfect spring-rate balance at a circuit or verifying road-setup sag at home, the K-Tech fork travel indicator removes the guesswork. Slide it onto the fork slider, complete your run, and read the exact millimetre of fork stroke recorded. That single data point can confirm whether your preload, compression and rebound settings are genuinely working as intended — or whether a change is overdue.

Build Quality

K-Tech components are produced to the same tolerances demanded by professional race teams. The 25K-028B is no exception: the 43 mm bore is held to a close fit so the indicator slides freely yet registers travel faithfully without slipping during aggressive braking or cornering loads.

Fitment & Compatibility

This fork travel indicator is designed specifically for the following motorcycle:

• Ducati Panigale 899 — model years 2013, 2014, 2015, 2016

Inner diameter: 43 mm. Verify your fork tube diameter before ordering if the forks have been replaced with non-standard units.

Specifications