Feel Racing Carbon Rear Fairing & Seat Base Kit WorldSSP Ducati Panigale V2 955 2020-2024 FR.495.113.C

When every minute in the pit lane counts, a tail kit that slips on and off without fuss is not a luxury — it is a requirement. The Feel Racing Racing Rear Tail and Seat Kit FR.495.113.C is engineered specifically for the Ducati Panigale V2 SSP build, delivering a complete, cohesive rear-end solution in Aviation Fiber that sits flush, removes cleanly, and holds its line lap after lap.

Key Features

• Complete four-piece system — rear tail fairing, inner shell, front tail fairing support, and seat base — supplied as a matched, race-ready assembly so every surface aligns first time.
• Aviation Fiber construction achieves an ideal racing weight-to-rigidity balance, surviving repeated on-track removal cycles without distortion or wear at the mounting points.
• Designed to the Ducati Corse racing rear-end specification, ensuring a natural, uncompromised fit with the Panigale V2 SSP subframe assembly.
• Clean exterior lines reproduce the WorldSSP silhouette straight from the box, requiring no filler or reshaping before the painter or sponsor vinyl goes on.
• Verified compatibility with the Ducati Racing rear subframe COD. 47112031B and the Racing Tail Support COD. 8301C091A for a fully referenced, confidence-inspiring build.

All-Day Comfort in the Pit Box

A tail section sees more handling on a race weekend than almost any other fairing component. The FR.495.113.C is conceived with that reality in mind. The seat base integrates flush with the inner shell and front support so the assembly locates positively every time it goes back on, with no rocking, no gaps, and no hunting for alignment. For the mechanic working under time pressure — and for the rider who simply wants the bike to feel solid from the moment they swing a leg over — that consistency matters as much as the weight saving.

Aviation Fiber Construction

Aviation Fiber refers to Feel Racing's composite construction process, developed for parts that must be both light enough to justify their place on a competition machine and robust enough to endure the thermal cycling, vibration, and physical handling that define track use. The result is a panel that does not flex under load, does not telegraph every stone strike into the paint, and does not delaminate after a season of trackday sessions. Finishing and minor fitting adjustments are standard practice for racing components of this type; a small amount of prep prior to painting is entirely normal and should be factored into the build schedule.

Fitment & Compatibility

This kit is developed for the Ducati Panigale V2 955 in WorldSSP trim, covering model years 2020 through 2024. For the correct racing configuration the kit is designed to be used in conjunction with:

• Ducati Racing rear subframe — COD. 47112031B
• Ducati Racing Tail Support — COD. 8301C091A

Verify subframe and tail support fitment before installation. This is a race-specification component and is not intended for road registration use.

Specifications