{"product_id":"ducabike-sprocket-carrier-ducati-monster-v2-890-2026-pc6f09","title":"Ducabike Sprocket Carrier Ducati Monster V2 890 (2026) – PC6F09","description":"\u003cp\u003eDucabike makes PC6F09, the Sprocket Carrier, and this page offers it for the Ducati Monster V2 890 (2026). Ducabike designs with specific motorcycles in mind, and its records connect PC6F09 with the Monster V2 890. Product photos, facts and fitment notes for PC6F09 on this page all refer to the Monster V2 890 version listed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined from solid billet aluminium\u003c\/li\u003e\n\u003cli\u003eCompatible with the original sprocket\u003c\/li\u003e\n\u003cli\u003eFlange machined from solid using 3D technology\u003c\/li\u003e\n\u003cli\u003eBearings, bushings, pins and hardware pre-assembled\u003c\/li\u003e\n\u003cli\u003eDelivered as a kit\u003c\/li\u003e\n\u003cli\u003eAnodised finish in black and red\u003c\/li\u003e\n\u003cli\u003eNo modifications required\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the original sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment per Ducabike: Ducati Monster V2 890, 2026\u003c\/li\u003e\n\u003cli\u003ePDF fitting instructions in the Downloads tab\u003c\/li\u003e\n\u003cli\u003eMade in Italy by Ducabike\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhich Bikes It Suits\u003c\/h2\u003e\u003cp\u003eThe Monster V2 890 version from 2026 is where Ducabike places PC6F09 in its compatibility list. Verify that your motorcycle is the Ducati Monster V2 890 and that its year is within 2026. Should your Monster V2 890 have been modified already, check whether the area concerned is still in original condition. Ducabike makes the same PC6F09 available for Ducati Hypermotard V2 890, Ducati Hypermotard V2 890 SP, Ducati Streetfighter V2 890, Ducati Streetfighter V2 S 890, on pages of their own. The Ducabike reference PC6F09 is shown in the title so you can compare it with the manufacturer's data.\u003c\/p\u003e\u003ch2\u003eBuilt by Ducabike\u003c\/h2\u003e\u003cp\u003eWeight saved on accessories adds up over the whole motorcycle, and an aluminium part like PC6F09 contributes to that. Aluminium alloys are a common choice for motorcycle accessories because they stay light without becoming fragile. The finish of PC6F09 is meant to look good up close as well as from a distance.\u003c\/p\u003e\u003ch2\u003eInstallation Overview\u003c\/h2\u003e\u003cp\u003eIn place of the original sprocket carrier, PC6F09 is mounted on the rear wheel. At the mounting point of the original sprocket carrier, on the rear wheel, PC6F09 is installed. The set PC6F09 contains the pieces listed by Ducabike for this kit. Do not ride the motorcycle if anything feels different after fitting PC6F09 until the cause has been found. Check fixings again after the first kilometres, since parts can settle once in use. For PC6F09, follow the tightening torques given by the manufacturer of your motorcycle. Save a copy of the Downloads PDF for later; it helps if PC6F09 ever has to come off again.\u003c\/p\u003e\u003ch2\u003eUpkeep\u003c\/h2\u003e\u003cp\u003eKeep high-pressure water jets at a distance from PC6F09. Moisture trapped under dirt can harm surfaces over time, which is another reason to keep PC6F09 clean. Keep fuel, oil and solvents away from PC6F09; if contact occurs, clean the area promptly.\u003c\/p\u003e\u003ch2\u003eAvailable Colours\u003c\/h2\u003e\u003cp\u003eAccording to the product data, the colour of PC6F09 is listed as black and red.\u003c\/p\u003e\u003ch2\u003ePurpose and Function\u003c\/h2\u003e\u003cp\u003eBecause bearings, bushings and pins are already fitted, PC6F09 goes straight into the position of the stock carrier. PC6F09 works with the OEM sprocket and installs without any changes to the bike.\u003c\/p\u003e\u003ch2\u003eLegal Information\u003c\/h2\u003e\u003cp\u003eDucabike does not certify PC6F09 for road use with any approval paper. Outside Germany, other inspection bodies and rules apply to PC6F09. When selling the motorcycle later, tell the buyer that PC6F09 has been fitted so that they can check the legal position.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Ducabike\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart number:\u003c\/em\u003e PC6F09\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eMaterial:\u003c\/em\u003e Aluminium, machined from solid\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Coloured anodising\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eColours:\u003c\/em\u003e Black and red\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePieces:\u003c\/em\u003e Kit\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFitment:\u003c\/em\u003e Ducati Monster V2 890 (2026)\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eRoad approval:\u003c\/em\u003e No ABE supplied – check local rules\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Ducabike","offers":[{"title":"Anodised Black","offer_id":54113048297738,"sku":"PC6F09D","price":265.29,"currency_code":"EUR","in_stock":true},{"title":"Anodised Red","offer_id":54113048330506,"sku":"PC6F09A","price":265.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/ducabike-pc6f09d_1.png?v=1794465172","url":"https:\/\/inter-pace.com\/products\/ducabike-sprocket-carrier-ducati-monster-v2-890-2026-pc6f09","provider":"Inter-Pace","version":"1.0","type":"link"}