Arai RX-7V Evo Kevin Schwantz 30 Replica Helmet 137-0315
Prices for Germany include VAT · Shipping calculated at checkout
Inside the EU — no customs duties will apply.
Questions? Just reach out — our team will help you right away.
Size chart Arai RX-7V Evo
| Size | Head circumference (cm) | Head circumference (inch) |
|---|---|---|
| XS | 53–54 cm | 20.9–21.3 in |
| S | 55–56 cm | 21.7–22.0 in |
| M | 57–58 cm | 22.4–22.8 in |
| L | 59–60 cm | 23.2–23.6 in |
| XL | 61 cm | 24.0 in |
How to measure your helmet size correctly: To find the right helmet size, measure your head circumference with a flexible tape measure.
It is important that the tape measure runs around the widest part of the head – only then will you get a correct result.
Place the tape measure at the front, about 1–2 cm above the eyebrows, and run it along the sides above the ears.
At the back, the tape must run over the largest part of the back of the head (not too low on the neck). The tape may run slightly at an angle – what matters is that it sits all the way around the largest points of the head.
Make sure the tape measure sits snugly but does not dig in. Measure 2–3 times for the most accurate result. You can then compare the measured value in centimetres (cm) with our size chart.
Tips for an accurate result
- Keep hair flat (e.g. do not measure over a voluminous hairstyle)
- Keep the tape horizontal, i.e. along the largest circumference
- Do not measure too loosely
- For values between two sizes:
→ usually choose the larger size (depending on helmet model / fit)
Important note on fit
The right helmet should fit firmly without causing uncomfortable pressure points.
A new helmet may feel a little tighter at first, as the inner lining adapts slightly over time.
- Worldwide shipping
- Genuine parts & verified quality
- Personal email support
- 14-day returns — in stock ships within 24h
Shipping & Returns
We ship with DHL and FedEx — express on request. If an item is in stock, express delivery can often go out within 1 business day. Standard delivery takes about 2–5 business days domestically and usually around a week worldwide. Please check the available shipping options and delivery times in your cart, as we offer several carriers depending on the country.
Returns must be registered in advance by email and are possible in line with our cancellation policy (14-day return request + 14-day return window after approval). Please note: unregistered returns are not accepted. You'll find all details on conditions, exceptions and refunds in our cancellation policy.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details and have no access to your credit card information.
The Arai RX-7V Evo Kevin Schwantz 30 Replica puts a legendary MotoGP livery on what is arguably the most accomplished road and track helmet Arai produces. Certified to the demanding ECE 22.06 standard and FIM homologated, it delivers genuine race-derived protection every time you pull on your lid — whether that is a weekend trackday or a long continental road trip.
Key Features
- ECE 22.06 and FIM homologated — meets the strictest current safety standard for road and circuit use
- Fiberglass composite shell keeps weight at approximately 1,550 g ± 50 g for all-day comfort without fatigue
- VAS MAX Vision visor provides an exceptionally wide, distortion-free field of view in all conditions and seasons
- Pinlock anti-fog insert included as standard, so the visor remains clear even on cold, damp mornings
- Fully removable and washable interior in Eco Pure material, redesigned for the Evo version with repositioned cheek-pad air channels
- Double-D-ring retention system and 5-year Arai warranty back up the premium investment
Built on Arai's Racing Heritage
The RX-7V Evo is a direct evolution of the RX-7V, refined specifically to meet — and exceed — the requirements of ECE R22-06. The shell geometry is the product of decades of Arai's smooth, round-shell philosophy, designed to glance and shed impact energy rather than absorb it in a single point. For the Evo revision, Arai redesigned the cheek pads entirely: the lateral air channels have been relocated to the rear of the cheek pad, improving both airflow management and the overall interior fit without compromising the close, race-orientated head hold that the RX-7V lineage is known for.
Everyday Usability
The Kevin Schwantz 30 Replica finish — a glossy tribute to the 1993 500cc world champion's iconic number 34 colours — makes this a helmet you will want to wear every day, not just save for special occasions. The standard-fit Pinlock insert means there is no extra purchase required before your first cold-weather ride. The Eco Pure liner is antibacterial, breathable and machine-washable, keeping the interior fresh across a full season of regular use. Bluetooth and intercom accessories can be integrated, with SHARP noting communication system compatibility for the RX-7V Evo — though riders who wear glasses should note the sporting race fit makes spectacle use difficult. At approximately 1,550 g the helmet sits at the lighter end of the premium fiberglass segment, reducing neck strain on longer journeys.
Fitment & Compatibility
The Arai RX-7V Evo is a universal full-face helmet suitable for all motorcycle types. Shell size increases at XL (shell 88 versus shell 86 for XS through L). Select your size using the head circumference guide below.
- XS — 53–54 cm
- S — 55–56 cm
- M — 57–58 cm
- L — 59 cm
- XL — 60–61 cm (outer shell one size larger)
Specifications
| Model | RX-7V Evo |
|---|---|
| SKU | 137-0315 |
| Colour / Finish | Kevin Schwantz 30 Replica, gloss |
| Approval | ECE 22.06, FIM homologated |
| Shell material | Fiberglass composite |
| Weight | approx. 1,550 g ± 50 g |
| Visor | VAS MAX Vision, Pinlock ready (insert included) |
| Retention | Double-D-ring |
| Interior | Removable and washable Eco Pure liner |
| Warranty | 5 years Arai |
| Model | RX-7V Evo |
|---|---|
| SKU / Part number | 137-0315 |
| Colour / Finish | Kevin Schwantz 30 Replica |
| Approval / Homologation | ECE 22.06 |
| Helmet type / Intended use | Premium full-face helmet / Road and racing-oriented use |
| Shell | Fiberglass composite |
| Weight | approx. 1,550 g ± 50 g |
| Visor | VAS MAX Vision visor, Pinlock ready / anti-fog insert included |
| Bluetooth / Intercom compatible | Yes, conditionally compatible (SHARP lists communication system compatibility for RX-7V Evo) |
| Suitable for glasses wearers | Not ideally — limited suitability due to sporting, close race fit |
-
1x helmet
-
1x Pinlock insert
-
Additional accessories (helmet bag, visor mechanism care oil, chin curtain, breath deflector)
Fitment data coming soon.
No reviews yet.
Build your kit
Gear up your RX-7V.
Add the parts made for this helmet — your total updates live.
helmet only
Your helmet is always included · one Pinlock comes free · pick your size in the buy box above
// Arai
Arai RX-7V Evo Kevin Schwantz 30 Replica Helmet 137-0315
Tech specs
- Model
- RX-7V Evo
- SKU / Part number
- 137-0315
- Colour / Finish
- Kevin Schwantz 30 Replica
- Approval / Homologation
- ECE 22.06
- Helmet type / Intended use
- Premium full-face helmet / Road and racing-oriented use
- Shell
- Fiberglass composite
- Weight
- approx. 1,550 g ± 50 g
- Visor
- VAS MAX Vision visor, Pinlock ready / anti-fog insert included
- Bluetooth / Intercom compatible
- Yes, conditionally compatible (SHARP lists communication system compatibility for RX-7V Evo)
- Suitable for glasses wearers
- Not ideally — limited suitability due to sporting, close race fit
// Support
Frequently asked questions
Shipping & delivery
Estimate your shipping
Get the real shipping cost for this item to your address — the same rates as checkout.