{"product_id":"accossato-off-road-sintered-front-brake-pads-husqvarna-fc-250-2014-2026-agpa29stmx","title":"Accossato Off-road Sintered Front Brake Pads Husqvarna FC 250 (2014-2026) – AGPA29STMX","description":"\u003cp\u003eA sand track in August and a clay circuit after a storm are hard on any front brake, and a Husqvarna FC 250 ridden flat out on either will chew through ordinary pads. Accossato answers with the AGPA29 in its Off-road sintered (STMX) compound, a friction mix the company describes simply as its choice for off-road riders. It is listed for the FC 250 from 2014 to 2026. The target is the rider who races dirt, spends Sunday evenings with a pressure washer and wants a front brake that keeps doing its job through mud, sand and dust.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSTMX front pads for the Husqvarna FC 250, model years 2014 to 2026\u003c\/li\u003e\n\u003cli\u003eThe compound Accossato designates for off-road riding\u003c\/li\u003e\n\u003cli\u003eMade for mud, deep sand, dust and water splashes\u003c\/li\u003e\n\u003cli\u003eA practical choice for motocross racing and hard training\u003c\/li\u003e\n\u003cli\u003eFrom an Italian company that took the Enduro World title in 1985\u003c\/li\u003e\n\u003cli\u003eTwo pads per box, one set for one caliper\u003c\/li\u003e\n\u003cli\u003eNo German ABE; for use in competition and off public roads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eAccossato is candid about what STMX is for: it is the compound the brand intends for off-road riders. It shares the AGPA29 backing with the OR, ST and EV1 articles but is specified with dirt in mind, where abrasive particles and water are constantly working their way between pad and disc. The company's general claims for its pads are low wear, a restrained temperature rise that limits fade and solid stopping power; on a motocross bike those qualities are tested more severely than almost anywhere else.\u003c\/p\u003e\n\u003ch2\u003eAfter the Mud\u003c\/h2\u003e\n\u003cp\u003eHow long an off-road pad lasts depends as much on the cleaning routine as on the friction material. After a muddy race, wash the caliper from several angles until clean water runs out, then pull the wheel and inspect both pads. Grit trapped behind the pads can hold them against the disc and wear the material unevenly. Before pushing pistons back, clean them so dirt does not get dragged into the seals. Riders with a sand-heavy calendar should check thickness after every event rather than every few weekends. When the new pair goes in, pump the lever until firm pressure returns and do a few gentle stops in the pits before the first sighting lap.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe AGPA29STMX is catalogued for the front of the Husqvarna FC 250 from 2014 to 2026. For the rear, Accossato lists the AGPP80, and the DK017 and DK018 discs complete the brand's offer for this model. Alternatives on the same front plate are OR, ST and EV1. The FC 250 uses one front caliper, so one box covers it.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eThese pads come without German ABE or test certification in our records, and they are sold for racing and off-road competition only.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eA box of two STMX pads for the front caliper of the FC 250.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePart number: AGPA29STMX\u003c\/li\u003e\n\u003cli\u003eCompound: Off-road sintered (STMX)\u003c\/li\u003e\n\u003cli\u003eDimensions: 93.9 × 36.5 × 7.6 mm\u003c\/li\u003e\n\u003cli\u003eMaterial: Sintered copper friction material with abrasives and carbon, for off-road use\u003c\/li\u003e\n\u003cli\u003eFriction coefficient: 0.65 average (0.58 minimum, 0.72 maximum), JASO regulation\u003c\/li\u003e\n\u003cli\u003eDensity: 4.50 g\/cm³ at 20 °C (+0.10 \/ −0.05)\u003c\/li\u003e\n\u003cli\u003eTemperature resistance: 450 °C working, 600 °C maximum\u003c\/li\u003e\n\u003cli\u003eContents: 2 brake pads, one set for one caliper\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Default Title","offer_id":53823736611082,"sku":"AGPA29STMX","price":45.91,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/AGPA29_EV1_f4cab201-8c34-433b-84e6-ee9b0488a435.png?v=1790593984","url":"https:\/\/inter-pace.com\/products\/accossato-off-road-sintered-front-brake-pads-husqvarna-fc-250-2014-2026-agpa29stmx","provider":"Inter-Pace","version":"1.0","type":"link"}