{"product_id":"accossato-front-axle-sliders-bmw-s1000-xr-2015-2019-pf057","title":"Accossato Front Axle Sliders BMW S1000 XR (2015-2019) – PF057","description":"\u003cp\u003eThe S 1000 XR put the four-cylinder engine of BMW's S 1000 family into a tall, upright machine built for fast touring. It is at home on mountain passes, where it covers the climb quickly and then stops at the top, where everyone takes a photo. Those stops are where tall bikes tend to fall: the lay-by slopes, the gravel is loose and a short leg finds nothing beneath it. The PF057 front axle sliders appear on Accossato's list for the S 1000 XR of 2015 to 2019; they come as a black pair made of aluminium and plastic.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFront axle sliders for the BMW S 1000 XR, 2015 to 2019\u003c\/li\u003e\n\u003cli\u003eAccossato code PF057, black\u003c\/li\u003e\n\u003cli\u003eMade of aluminium combined with plastic\u003c\/li\u003e\n\u003cli\u003eTwo protectors, one for each side\u003c\/li\u003e\n\u003cli\u003eAccossato includes spacers, screws and all other fitting parts\u003c\/li\u003e\n\u003cli\u003eCan reduce damage around the fork ends if the bike falls or slides\u003c\/li\u003e\n\u003cli\u003ePairs with the PP001 rear axle sliders and TP083 crash pads for the same bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE documented; for track and competition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eTwo protectors, both black, make up the PF057, and each is built from aluminium in combination with plastic. Accossato states that the kit contains the spacers and screws plus the other parts required to mount them. For the S 1000 XR the manufacturer does not describe the exact position, and we do not guess. The idea behind the pair is straightforward: if the bike falls or slides, these should make contact before the fork and the front axle do, and they are far cheaper to replace than either.\u003c\/p\u003e\n\u003ch2\u003ePhoto Stop at the Top of the Pass\u003c\/h2\u003e\n\u003cp\u003ePass summits are rarely level. The car park beside the café slopes towards the valley, the tarmac frays into gravel at the edges and the spaces fill up with bikes and camper vans. On a machine as tall as the S 1000 XR, the rider has to judge where the foot will land before coming to a halt. Put it into a dip or onto loose stones and the bike leans beyond the point where it can be held, usually towards the lower side. A few habits help. Park pointing uphill and leave it in first gear, so it cannot roll forward off the stand, and set the stand on firm ground or a flat stone. If the XR does go over, check the fork ends, the sliders and their screws before starting the descent. A bent protector should be replaced; a damaged fork belongs in a workshop.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eThe PF057 is listed for the S 1000 XR from 2015 to 2019. For the same bike Accossato offers the PP001 rear axle sliders and the TP083 crash pads, both given for 2015 to 2018. Inter-Pace also lists the PF057 for the R 1250 RS and the F 900 XR. After fitting, spin the front wheel and turn the bars fully in both directions: nothing may contact the calipers, discs or mudguard. Tighten all screws to the manual's values.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eNo ABE and no test documents are available to us for this set, so it is sold for motorsport and competition.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003ePF057 in black: two front axle sliders with the spacers, screws and other fitting parts Accossato includes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Front axle sliders (fork protection)\u003c\/li\u003e\n\u003cli\u003ePart number: PF057\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium and plastic\u003c\/li\u003e\n\u003cli\u003ePieces: 2 (one per side)\u003c\/li\u003e\n\u003cli\u003eFitting kit: Spacers, screws and all fitting parts included (Accossato)\u003c\/li\u003e\n\u003cli\u003eColour: Black\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000 XR (2015–2019)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003cli\u003eCheck: Compare with the application list before ordering\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Default Title","offer_id":53784358027530,"sku":"PF057N","price":45.26,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PF057_0a8b90af-c57f-4a9f-99c9-f0f2212aec71.png?v=1790043034","url":"https:\/\/inter-pace.com\/products\/accossato-front-axle-sliders-bmw-s1000-xr-2015-2019-pf057","provider":"Inter-Pace","version":"1.0","type":"link"}