{"product_id":"accossato-fixed-rear-brake-disc-gasgas-ec-125-1998-2015-dk018","title":"Accossato Fixed Rear Brake Disc GasGas EC 125 (1998-2015) – DK018","description":"\u003cp\u003eThe GasGas EC 125 is a light two-stroke enduro built long before GasGas became part of the KTM group, and many are still out on the trails, passed from rider to rider and brought back to life in home workshops. On an old enduro bike, the rear brake is often the part that has been neglected longest. Accossato lists its DK018 rear disc for the EC 125 from 1998 to 2015: a fixed disc in one piece of steel, 220 mm in diameter and 4 mm thick, which the maker describes as a like-for-like replacement for the factory part.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFixed off-road rear disc for the GasGas EC 125, 1998 to 2015\u003c\/li\u003e\n\u003cli\u003eOne-piece, steel-made according to the supplier\u003c\/li\u003e\n\u003cli\u003e220 mm outer diameter, 110 mm inner diameter, 4 mm thickness\u003c\/li\u003e\n\u003cli\u003eInterchangeable with the original disc, says Accossato\u003c\/li\u003e\n\u003cli\u003eMinimum working thickness printed on the disc\u003c\/li\u003e\n\u003cli\u003eAccossato also lists the B8206 brake lever and C7283 clutch lever for this bike\u003c\/li\u003e\n\u003cli\u003eNo German ABE documented; for off-road competition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\n\u003cp\u003eOff-road rear discs are made to put up with mud, water and stones, and the DK018 keeps things simple for that reason: one piece of steel, with no carrier and no rivets. Its outer diameter is 220 mm, its centre opening 110 mm and its thickness 4 mm. Enduro is familiar ground for Accossato, whose history includes a world title in the discipline in 1985. The company says its disc know-how was built up in road racing, in Superbike, Moto2 and Moto3, but careful design and choice of material count on a trail as much as on a circuit.\u003c\/p\u003e\n\u003ch2\u003eAn Older EC 125 Back on the Trail\u003c\/h2\u003e\n\u003cp\u003eReviving an older EC 125 usually starts with the engine, but the rear brake deserves the same attention before the first ride. Years of standing can leave the caliper pistons stiff, the slider pins dry and the fluid dark, so the pads drag and heat the disc even when you are not using the brake. Strip the caliper, clean and grease the slider pins with a suitable grease while keeping it well away from the pads, and renew the fluid.\u003c\/p\u003e\n\u003cp\u003eThen look at the disc. A rear disc on an enduro bike collects every kind of abuse: stones thrown up by the front wheel, logs that catch it from below, mud that grinds its surface. Check it for bends by spinning the wheel and watching the gap to the caliper, and measure its thickness in several places against the service limit for the original, or the minimum printed on an Accossato disc. A disc that is bent, cracked or thin has done its job. Replacing it together with new pads gives an old EC 125 a rear brake that stops it predictably on the next steep descent.\u003c\/p\u003e\n\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\n\u003cp\u003eAccossato's list covers the GasGas EC 125 over a long span, 1998 to 2015. Over that many years, small changes to wheels and brakes are possible, so lay the new disc against the old one before fitting and check the diameter, the centre opening and the bolt holes. Accossato also offers the B8206 brake lever and the C7283 clutch lever for this bike. Tighten the disc bolts to the value in the GasGas manual, with thread lock if the manual asks for it.\u003c\/p\u003e\n\u003ch2\u003eRoad Approval\u003c\/h2\u003e\n\u003cp\u003eThe DK018 is sold for off-road competition and use on closed ground: no German ABE and no type approval are documented for it.\u003c\/p\u003e\n\u003ch2\u003eScope of Delivery\u003c\/h2\u003e\n\u003cp\u003eOne DK018 rear disc, steel, in one piece.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eType: Fixed brake disc, steel\u003c\/li\u003e\n\u003cli\u003ePart number: DK018\u003c\/li\u003e\n\u003cli\u003ePosition: Rear\u003c\/li\u003e\n\u003cli\u003eOuter diameter: 220 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter: 110 mm\u003c\/li\u003e\n\u003cli\u003eThickness: 4 mm\u003c\/li\u003e\n\u003cli\u003eReplacement: Interchangeable with the original equipment disc\u003c\/li\u003e\n\u003cli\u003eWear limit: Minimum thickness marked on the disc\u003c\/li\u003e\n\u003cli\u003eFitment: GasGas EC 125 (1998–2015)\u003c\/li\u003e\n\u003cli\u003eRoad approval: None documented, track use only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Accossato","offers":[{"title":"Default Title","offer_id":53783911399690,"sku":"DK018","price":66.64,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/DK018_2ae33740-493b-4f52-a5eb-fbf47ac891ec.png?v=1790024038","url":"https:\/\/inter-pace.com\/products\/accossato-fixed-rear-brake-disc-gasgas-ec-125-1998-2015-dk018","provider":"Inter-Pace","version":"1.0","type":"link"}