{"title":"Aluminium","description":null,"products":[{"product_id":"oz-piega-aluminium-set-aprilia-rsv4-09-16","title":"OZ Piega Forged Aluminium Wheel Set for Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016)","description":"\u003cp\u003eBorn in the OZ SBK Racing department and proven at the highest levels of circuit competition, the Piega five-spoke forged aluminium wheel set delivers a measurable reduction in rotating mass that sharpens turn-in, accelerates faster out of corners and keeps the Aprilia RSV4 planted at track speeds. Every gram saved at the rim pays dividends the moment you tip into a bend — this is performance engineering you feel immediately.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed directly by OZ's SBK Racing division for maximum stiffness-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eForged from premium-grade aluminium — dramatically lighter than cast alternatives, reducing unsprung and rotating mass simultaneously\u003c\/li\u003e\n\u003cli\u003eComplete front-and-rear set: 1x front wheel and 1x rear wheel supplied together\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angled valves and spacers (fitted as required), plus a sprocket carrier — note the original rear sprocket is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the original Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF wheels (2009–2016): no modifications required\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ Racing's exacting production standards for long-term reliability on road and track\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering for the Street\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective performance modifications available to a superbike rider. Unlike power additions that demand complementary chassis work, lighter wheels improve every dynamic simultaneously: acceleration, braking, steering response and mid-corner stability. The Piega's forged construction achieves this while retaining the structural integrity demanded by sustained high-speed track use — the same fundamental design philosophy that OZ applies to its World Superbike programmes.\u003c\/p\u003e\u003cp\u003eThe five-spoke architecture is not purely aesthetic. Each spoke is profiled to balance flex resistance under braking loads with lateral rigidity through fast directional changes. Whether you are on track chasing lap times or on open roads where feel and feedback are paramount, the Piega set transforms the character of the RSV4 platform.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eOZ manufactures the Piega set entirely in Italy, applying the same quality controls used across its motorsport catalogue. Three finish options are available — gloss black anodised, techno black anodised and techno gold anodised — each processed to resist corrosion and retain its appearance through repeated track weekends and road use. Anodising penetrates the aluminium surface rather than sitting on top of it, providing durability that paint cannot match.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Aprilia RSV4, RSV4 Factory, RSV4 R, RSV4 RR and RSV4 RF across model years 2009 to 2016. The set replaces the original wheels on a direct-fit basis. A compatible sprocket carrier is included; however, the original rear sprocket will not fit and must be sourced separately. Spacers are included and fitted only where required by the installation.\u003c\/p\u003e\u003cp\u003ePart numbers: P3065AP35 (front) + P6095AP60 (rear).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eSpoke configuration: 5-spoke\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3065AP35 + P6095AP60\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 Factory \/ RSV4 R \/ RSV4 RR \/ RSV4 RF (2009–2016)\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402057994,"sku":"P3065AP35+P6095AP60_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167402090762,"sku":"P3065AP35+P6095AP60_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167402123530,"sku":"P3065AP35+P6095AP60_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy.png?v=1780797041"},{"product_id":"oz-piega-aluminium-set-aprilia-rsv4-17-20","title":"OZ Piega Forged Aluminium Wheel Set for Aprilia RSV4 \/ RSV4 1100 Factory \/ RF \/ RR (2017–2020)","description":"\u003cp\u003eBorn in OZ's SBK Racing division, the Piega wheel set brings genuine superbike-championship pedigree to your Aprilia RSV4. Forged from premium-grade aluminium and shaped into a purposeful five-spoke architecture, these wheels slash rotating mass to sharpen steering response, accelerate direction changes and liberate every fraction of the RSV4's power — on the track and on the road alike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department — form follows race function.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass for measurably faster steering and improved agility at high speed.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for the standard Aprilia RSV4 \/ RSV4 1100 Factory \/ RF \/ RR (2017–2020) wheels — no modification required.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel with high-quality bearings, aluminium angled valves, and spacers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eRear wheel supplied with a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting racing-grade production standards for long-term reliability at the limit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Performance on the Road\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating weight is one of the most effective performance upgrades available on any motorcycle. Less rotational inertia means the RSV4's engine spends less energy accelerating the wheels, translating into crisper throttle response, shorter braking distances and a chassis that changes direction with race-bred precision. The Piega's geometry has been validated in Superbike competition, so every dimension — spoke profile, rim width, hub offset — has been optimised for the demands of a high-power V4 platform rather than adapted from a generic design.\u003c\/p\u003e\u003ch2\u003eEngineering \u0026amp; Finish\u003c\/h2\u003e\u003cp\u003eOZ uses a hot-forging process that aligns the grain structure of the aluminium for superior strength-to-weight ratio compared with cast alternatives. The result is a wheel that is simultaneously lighter and more rigid — exactly what is needed to keep a 200-plus-horsepower RSV4 planted under hard braking and through fast sweepers. Three anodised finishes are available: gloss black anodised, techno black anodised, and techno gold anodised, each applied to the forged surface to resist corrosion and maintain appearance after prolonged track and road use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set has been developed specifically for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 R (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe wheels are a direct replacement for the OEM rims. A compatible rear sprocket must be sourced separately as the original item does not fit the supplied sprocket carrier.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3065AP35 (front) + P6095AP60 (rear)\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eSpoke design: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eDevelopment origin: OZ SBK Racing division\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIncludes: 1x front wheel, 1x rear wheel, high-quality bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eCompatibility: Aprilia RSV4 \/ RSV4 1100 Factory \/ RF \/ RR (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402352906,"sku":"P3065AP35+P6095AP60_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167402385674,"sku":"P3065AP35+P6095AP60_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167402418442,"sku":"P3065AP35+P6095AP60_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_42b81173-27c6-4d14-908c-83f4c3451994.png?v=1780797043"},{"product_id":"oz-piega-aluminium-set-aprilia-rsv4","title":"OZ Piega Forged Aluminium Wheel Set for Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026)","description":"\u003cp\u003eEngineered by OZ's SBK Racing division and manufactured in Italy, the Piega wheel set brings a genuine reduction in rotating mass to the Aprilia RSV4, RSV4 RR and RSV4 1100 Factory — translating directly into sharper turn-in, faster direction changes and greater stability at speed, whether you are threading traffic on a Sunday morning or chasing lap times at the circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department for the optimal balance of rigidity and weight saving.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction delivers the strength needed for track use while keeping unsprung and rotating mass to a minimum.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set supplied together — one front and one rear wheel included.\u003c\/li\u003e\n\u003cli\u003ePremium bearings, aluminium angled valves and spacers (fitted only where required) are included in the box.\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — note that the original Aprilia sprocket does not fit and a compatible replacement must be used.\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the standard Aprilia RSV4 \/ RR \/ 1100 Factory wheels; no modification required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting production standards for long-term reliability on road and track.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to sharpen a motorcycle's responses without touching the suspension or engine. The Piega's forged aluminium spokes shed weight where it matters most — at the rim — so the RSV4 reacts more keenly to steering inputs, stops with greater urgency and changes direction with noticeably less effort. At motorway speeds and on fast, flowing circuit sections that same mass reduction contributes to a more planted, composed feel. The five-spoke architecture is not merely aesthetic; the spoke geometry is tuned to distribute load evenly around the rim under hard braking, cornering and acceleration forces, making the Piega equally at home on a daily road commute and a weekend track day.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eOZ has manufactured competition wheels for World Superbike, MotoGP and endurance racing for decades, and the Piega carries that heritage into a road-legal package. Each wheel is forged — not cast — meaning the aluminium grain structure is aligned for superior fatigue resistance under the cyclic loads that high-performance riding generates. The finish options (gloss black anodised, techno black anodised and techno gold anodised) are applied after machining so they conform precisely to the final surface contour, providing both corrosion protection and a finish that ages well under the heat cycles a race-prepared or hard-ridden RSV4 will produce.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and tested specifically for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe wheels are a direct replacement for the OEM items; standard spacers are included where needed. A compatible sprocket carrier is supplied, but the original Aprilia rear sprocket will not fit — please ensure a compatible rear sprocket is sourced alongside this wheel set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: P3065AP35 (front) + P6095AP60 (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: 5-spoke Piega, developed by OZ SBK Racing\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory, 2021–2026\u003c\/li\u003e\n\u003cli\u003eScope of supply: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eIntended use: road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402483978,"sku":"P3065AP35+P6095AP60_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167402516746,"sku":"P3065AP35+P6095AP60_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167402549514,"sku":"P3065AP35+P6095AP60_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_15047252-93e6-4fed-8306-731bca4686e3.png?v=1780797044"},{"product_id":"oz-piega-aluminium-felgen-set-bmw-k46","title":"OZ Piega Forged Aluminium Wheel Set for BMW S1000RR K46 (2009-2018)","description":"\u003cp\u003eThe OZ Piega wheel set transforms the BMW S1000RR K46 into a sharper, more responsive machine without compromise. Engineered by OZ's SBK Racing division and forged from premium aluminium, this five-spoke set delivers a meaningful reduction in rotating mass — making every input from the bars or the pegs feel more direct, more immediate, and more rewarding mile after mile.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department for proven race and road performance\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass for faster steering response and more precise cornering\u003c\/li\u003e\n\u003cli\u003eComplete set includes front wheel (3.50 x 17) and rear wheel (5.50 x 17) ready to replace the original cast wheels\u003c\/li\u003e\n\u003cli\u003eSupplied with premium bearings, aluminium angled valves, and spacers where required\u003c\/li\u003e\n\u003cli\u003eIncludes a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eDirect OEM fitment for BMW S1000RR K46 (2009-2018) equipped with cast wheels — no modifications required\u003c\/li\u003e\n\u003cli\u003eMade in Italy with OZ's exacting manufacturing standards for long service life and reliable performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Rider Who Demands More\u003c\/h2\u003e\u003cp\u003eForged aluminium is the benchmark material for serious motorcycle wheels. Compared with the standard cast items, forged construction produces a denser, more consistent grain structure that is simultaneously lighter and stronger. On the S1000RR K46 this translates into a front end that turns in with noticeably less effort and a rear that tracks more faithfully through a series of fast corners. Whether you are threading through traffic on a long road ride or chasing lap times on track, the reduction in unsprung and rotating mass lets the suspension work more effectively and keeps the tyres in better contact with the surface.\u003c\/p\u003e\u003ch2\u003eOZ SBK Racing Heritage\u003c\/h2\u003e\u003cp\u003eOZ Racing has supplied wheels to factory superbike and MotoGP teams for decades. The Piega range is the direct road and trackday expression of that competition engineering, carrying the same five-spoke aesthetic seen in World Superbike paddocks into a form that fits directly onto production machines. Part numbers P3063BM35 (front) and P6094BM60 (rear) are specific to the S1000RR K46 generation, ensuring tolerances are matched to the BMW factory specification rather than adapted from a generic fitment.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K46 produced from 2009 to 2018. It is intended as a direct replacement for the original cast wheel option on that model. Bikes fitted with the optional OEM forged wheels from the factory may have different bearing or sprocket carrier arrangements — please verify your existing specification before ordering. A replacement sprocket carrier is included, but the original BMW rear sprocket must be replaced as it is not compatible with the OZ carrier.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3063BM35 (front) + P6094BM60 (rear)\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46, 2009-2018 (cast wheel models)\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, premium bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402680586,"sku":"P3063BM35+P6094BM60_sg","price":2668.8,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167402713354,"sku":"P3063BM35+P6094BM60_tb","price":2668.8,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167402746122,"sku":"P3063BM35+P6094BM60_tg","price":2668.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_6248686b-3884-4502-9443-a9cb2bf8bed2.png?v=1780797047"},{"product_id":"oz-piega-aluminium-set-ducati-panigale-899","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale 899 (2013-2016)","description":"\u003cp\u003eBorn in OZ's SBK Racing division, the Piega forged aluminium wheel set delivers the kind of rotational mass reduction that transforms how the Ducati Panigale 899 steers, changes direction, and settles under braking — on road and track alike. Every pair is manufactured in Italy to the exacting quality standards that have made OZ a benchmark name in motorsport.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's SBK Racing department for maximum stiffness-to-weight performance.\u003c\/li\u003e\n\u003cli\u003eForged high-grade aluminium construction — lighter than cast alternatives, stronger under sustained track loads.\u003c\/li\u003e\n\u003cli\u003eSignificant reduction in rotating unsprung mass for sharper steering response, improved agility, and greater high-speed stability.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) — direct replacements for the Panigale 899 OEM wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angled valves, and spacers (fitted only where required), plus a dedicated sprocket carrier (note: the original rear sprocket is not compatible with this carrier).\u003c\/li\u003e\n\u003cli\u003eMade in Italy — OZ's hallmark of manufacturing precision, long-term reliability, and consistent finish quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing the gyroscopic inertia of the wheel set makes the Panigale 899 more willing to tip into corners and more responsive when flicking between apexes — changes that feel immediate from the first ride. The five-spoke layout optimises rigidity under braking and traction loads without adding unnecessary material, keeping the wheel as light as the forging process allows. Whether the bike sees weekend canyon runs or regular circuit days, the Piega set raises the dynamic ceiling of the 899 platform in a way that chassis tuning alone cannot match.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eOZ applies the same forging and finishing processes to these road-legal wheels as to their race-homologated products. Available in three anodised finishes — gloss black, techno black, and techno gold — each colour is applied to the forged billet before final machining, ensuring the finish is integral to the wheel rather than a surface coating that can chip or flake. The result is a wheel that looks as purposeful as it performs, and that maintains its appearance under the thermal and mechanical demands of track use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and validated specifically for the Ducati Panigale 899, model years 2013 to 2016. It replaces the OEM wheels on a like-for-like basis with no frame or swingarm modifications required. Important: the original Ducati rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket suited to the OZ carrier must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: P3102DU35 (front) + P6184DU55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402844426,"sku":"P3102DU35+P6184DU55_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167402877194,"sku":"P3102DU35+P6184DU55_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167402909962,"sku":"P3102DU35+P6184DU55_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_ce099549-558f-4e65-859b-bf826f9469fa.png?v=1780797052"},{"product_id":"oz-piega-aluminium-felgen-set-ducati-panigale-959","title":"OZ Piega Forged Aluminium Wheel Set – Ducati Panigale 959 (2016-2019)","description":"\u003cp\u003eBorn in OZ's SBK racing department, the Piega wheel set brings genuine motorsport engineering to your Ducati Panigale 959. The five-spoke forged aluminium construction trims rotational mass precisely where it counts, rewarding you with sharper turn-in, more responsive handling and a ride that stays composed whether you are threading through city traffic or pushing hard on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed directly by the OZ SBK Racing division — not an aftermarket adaptation but a purpose-built performance wheel.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotational mass, improving acceleration, braking response and directional agility compared to the standard cast wheels.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), both machined as direct replacements for the Ducati Panigale 959 factory wheels.\u003c\/li\u003e\n\u003cli\u003eShips with quality bearings, aluminium angled valves and spacers (where required), plus a dedicated rear sprocket carrier — note that the original Ducati rear sprocket does not fit the new carrier.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards, guaranteeing long-term reliability under repeated road and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotational mass is one of the most effective ways to transform the feel of a motorcycle, and the Piega set makes that improvement immediately apparent. Steering becomes more intuitive at corner entry, the front end communicates with greater clarity under braking, and the whole package feels more alive at speed. The rigid five-spoke geometry maintains lateral stiffness even under the hard lateral loads generated during aggressive cornering, giving you a confident, consistent feel lap after lap.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eOZ has manufactured racing wheels for MotoGP, World Superbike and Formula 1 for decades, and the same manufacturing philosophy flows into the Piega road and track range. Each wheel is forged rather than cast, a process that aligns the grain structure of the aluminium for a superior strength-to-weight ratio. The finish options — gloss black anodised, techno black anodised, and techno gold anodised — are applied with the same durability standards OZ applies to its competition products, resisting brake dust, stone chips and the thermal cycles of hard riding.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Ducati Panigale 959 across all model years from 2016 to 2019. It is a direct bolt-on replacement for the factory wheels. A new rear sprocket carrier is included; the original Ducati rear sprocket is not compatible with it and must be replaced when fitting this set. Part numbers: P3102DU35 (front) and P6184DU55 (rear).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3102DU35 + P6184DU55\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402975498,"sku":"P3102DU35+P6184DU55_sg","price":2494.08,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403008266,"sku":"P3102DU35+P6184DU55_tb","price":2494.08,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403041034,"sku":"P3102DU35+P6184DU55_tg","price":2494.08,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_0ae576b4-bae1-4a0b-90e8-b26c34db9e95.png?v=1780797055"},{"product_id":"oz-piega-aluminium-set-ducati-panigale-1199","title":"OZ Piega Forged Aluminium Wheel Set – Ducati Panigale 1199\/R\/S (2012-2017)","description":"\u003cp\u003eBorn in the OZ SBK Racing department and trusted by riders who demand verifiable performance, the OZ Piega wheel set brings race-proven, forged aluminium construction to the Ducati Panigale 1199, 1199 R and 1199 S. Reduced rotating mass translates directly into sharper turn-in, faster direction changes and measurably improved ride dynamics — whether you are chasing lap times or carving your favourite road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by the OZ SBK Racing division for maximum rigidity and minimal unsprung weight.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction — stronger and lighter than cast alternatives, engineered to meet the demands of both road and track use.\u003c\/li\u003e\n\u003cli\u003eComplete set: front wheel (3.50 x 17) and rear wheel (5.50 x 17) included, with direct fitment to the Ducati Panigale 1199\/R\/S (2012–2017) as a direct replacement for the OEM wheels.\u003c\/li\u003e\n\u003cli\u003ePremium bearings, aluminium angled valves and spacers (where required) supplied as standard.\u003c\/li\u003e\n\u003cli\u003eRear wheel includes a sprocket carrier — note that the original OEM sprocket is not compatible and a replacement will be required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: OZ's Italian manufacturing heritage guarantees consistent quality and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to improve a motorcycle's dynamic response, and the Piega set delivers exactly that. The five-spoke geometry distributes stress efficiently across the rim, maintaining outstanding stability at high speeds while shaving grams where they matter most. Riders familiar with the Panigale 1199 platform will notice the benefit immediately — crisper throttle response on exit and a more communicative front end under braking.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eEach OZ Piega wheel is forged from premium-grade aluminium, a process that aligns the grain structure of the metal for superior fatigue resistance compared to casting. The finish — available in gloss black anodised, techno black anodised or techno gold anodised — is applied to the same exacting standard used on OZ's competition wheels, providing lasting corrosion resistance alongside a distinctive race aesthetic. The part numbers for this set are P3102DU35 (front) and P6012DU60 (rear).\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe wheels are a direct replacement for the OEM items. Please note that the standard Ducati sprocket is not compatible with the OZ sprocket carrier supplied; a suitable aftermarket or OZ-compatible rear sprocket must be used.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3102DU35 (front) + P6012DU60 (rear)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: premium bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403172106,"sku":"P3102DU35+P6012DU60_sg","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403204874,"sku":"P3102DU35+P6012DU60_tb","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403237642,"sku":"P3102DU35+P6012DU60_tg","price":2293.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy.png?v=1780797062"},{"product_id":"oz-piega-aluminium-felgen-set-ducati-panigale-1299-s","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale 1299\/S (2015-2018)","description":"\u003cp\u003eDeveloped by OZ's SBK Racing division, the Piega forged aluminium wheel set is a direct-fit upgrade for the Ducati Panigale 1299\/S that pays dividends every time you leave the garage — sharper turn-in on the daily commute, more confidence mid-corner on a Sunday blast, and genuine weight savings that let the engine's character shine through. This is one of the most straightforward performance upgrades available for the 1299 platform.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's SBK Racing department, balancing stiffness and low rotational mass for real-world ride improvement.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces unsprung and rotating weight compared to the stock cast wheels, enhancing agility and steering response at all speeds.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), both sized as direct replacements for the Panigale 1299\/S originals.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angled valve stems, and spacers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eIncludes a rear sprocket carrier — note that the original Ducati rear sprocket is not compatible and will need to be replaced.\u003c\/li\u003e\n\u003cli\u003eDual-purpose design equally at home on road and track, with no compromise between everyday usability and performance-focused riding.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most efficient ways to improve a motorcycle's dynamics. By spinning lighter wheels, the Panigale 1299\/S responds more eagerly to throttle inputs, brakes with greater precision, and changes direction with noticeably less effort through tight sequences. The Piega's five-spoke geometry was refined in Superbike competition, so the stiffness-to-weight ratio is optimised rather than simply minimised — you get wheels that hold their line under hard braking without sacrificing the suppleness needed for bumpy road surfaces.\u003c\/p\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eUnlike dedicated race wheels that demand constant attention, the OZ Piega set is designed for regular road use. The anodised finish resists corrosion from road grime and brake dust, and the included quality bearings are built to withstand the thermal cycling of street riding. Part numbers P3102DU35 (front) and P6012DU60 (rear) confirm these are purpose-engineered for the 1299 platform rather than adapted from a generic catalogue — fitment is precise and installation is straightforward for any competent workshop.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed specifically for the Ducati Panigale 1299 and 1299 S, model years 2015 to 2018. The wheels are a direct swap for the original equipment wheels. Please note that the factory rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket will be required at the time of fitment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3102DU35 (front) + P6012DU60 (rear)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1299 \/ 1299 S (2015-2018)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403270410,"sku":"P3102DU35+P6012DU60_sg","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403303178,"sku":"P3102DU35+P6012DU60_tb","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403335946,"sku":"P3102DU35+P6012DU60_tg","price":2293.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_9310ec5a-2093-41ec-8351-bfb603e583ed.png?v=1780797067"},{"product_id":"oz-piega-aluminium-set-ducati-panigale-v4","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale V4\/S\/R (2018-2024)","description":"\u003cp\u003eDeveloped by OZ's SBK Racing division, the Piega wheel set brings genuine superbike engineering to your Ducati Panigale V4, V4 S or V4 R. Forged from high-grade aluminium and validated against the demands of world-level circuit racing, these wheels are built to meet the strictest performance and safety standards — on the road and on the track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's SBK Racing department for maximum structural integrity under race conditions\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass significantly, sharpening steering response and improving agility at all speeds\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the original Ducati Panigale V4\/S\/R wheels — no modifications required\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17)\u003c\/li\u003e\n\u003cli\u003eSupplied with premium-grade bearings, aluminium angled valves and spacers where required, plus a rear sprocket carrier (note: the original Ducati rear sprocket is not compatible)\u003c\/li\u003e\n\u003cli\u003eMade in Italy — OZ's Italian manufacturing heritage ensures consistent quality and long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing DNA, Road Registered\u003c\/h2\u003e\u003cp\u003eThe Piega series sits at the core of OZ's competition programme. The five-spoke geometry is not a styling exercise — it is the direct result of finite-element analysis carried out by OZ's racing engineers to balance stiffness, weight and fatigue resistance in a single forged structure. Lower rotating mass reduces the gyroscopic effect at each axle, which translates into a motorcycle that changes direction more readily, responds to braking inputs faster and feels more connected through fast, sweeping corners.\u003c\/p\u003e\u003cp\u003eBecause the wheel set is a like-for-like swap with the factory wheels, you retain all standard tyre sizes and brake caliper positions. There is no compromise to ride quality or safety — simply a measurable improvement in dynamic performance that becomes apparent the first time you tip into a demanding corner.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eOZ has manufactured forged aluminium wheels for MotoGP, Superbike World Championship and national race series for decades. The Piega set carries that pedigree into a package designed for owners who demand race-proven quality on road-registered machinery. Every wheel is produced at OZ's facility in Italy and undergoes strict quality control before leaving the factory. The included bearings and ancillary hardware are specified to the same standard as the wheels themselves, so the complete installation is consistent from the outset.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed specifically for the Ducati Panigale V4, V4 S and V4 R produced between 2018 and 2024. It is a direct replacement for the original wheels. The original Ducati rear sprocket is not compatible; a new sprocket carrier is included in the set and an appropriate rear sprocket must be sourced separately. Part number: P3102DU35+P6012DU60.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003ePart number: P3102DU35+P6012DU60\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403368714,"sku":"P3102DU35+P6012DU60_sg","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403401482,"sku":"P3102DU35+P6012DU60_tb","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403434250,"sku":"P3102DU35+P6012DU60_tg","price":2293.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_7788d586-1093-47b1-b622-fb8a154049d0.png?v=1780797068"},{"product_id":"oz-piega-aluminium-felgen-set-ducati-panigale-v2","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eBorn in OZ's SBK Racing division and shaped by the demands of world-class superbike competition, the Piega forged aluminium wheel set raises the performance ceiling of the Ducati Panigale V2 955 in a way that no cast alternative can match. Every gram saved from rotating mass translates directly into sharper turn-in, faster acceleration response and a more connected feel through every corner — on road or track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers exceptional rigidity with a dramatically reduced rotating mass compared to OEM wheels, improving handling precision and response.\u003c\/li\u003e\n\u003cli\u003eThe five-spoke Piega design was developed specifically by OZ's SBK Racing department, optimising load paths for high-speed stability and agility in equal measure.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), engineered as a direct OEM replacement for the Panigale V2 955.\u003c\/li\u003e\n\u003cli\u003eEach set ships complete with durable bearings, aluminium angled valves, spacers where required, and a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards, guaranteeing consistent quality and long service life whether the bike is ridden daily or pushed hard on track.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eOZ's forging process compresses the aluminium under enormous pressure, aligning the grain structure of the metal for superior strength-to-weight performance that casting simply cannot replicate. The result is a wheel that is simultaneously lighter, stiffer and more fatigue-resistant than a stock unit. The finish — available in gloss black anodised, techno black anodised or techno gold anodised — is applied after machining to ensure the surface treatment sits on a perfectly true and balanced rim.\u003c\/p\u003e\u003cp\u003eThe anodised finish is not merely cosmetic. It provides a hard, corrosion-resistant layer that holds up to road grime, brake dust and track abuse without chipping or flaking. The attention to detail extends to every component in the kit: precision bearings, machined aluminium angled valves and correctly dimensioned spacers ensure that fitting is straightforward and that geometry is preserved exactly as intended.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the highest-return modifications available for a performance motorcycle. With the Piega set fitted, the Panigale V2 955 benefits from more precise steering, improved braking feel and faster directional changes — qualities that matter as much on a demanding mountain road as they do on a circuit. The five-spoke architecture balances torsional stiffness with a degree of lateral compliance that keeps tyre contact patch behaviour consistent under hard cornering loads.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed exclusively for the Ducati Panigale V2 955 produced between 2020 and 2024. It is a direct replacement for the OEM wheels, requiring no frame or swingarm modification. The included sprocket carrier is necessary as the original Ducati rear sprocket is not compatible with the OZ hub. Confirm your model year and variant before ordering; fitment details are specific to the V2 955 generation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eP3102DU35 (front) + P6012DU55 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403598090,"sku":"P3102DU35+P6012DU55_sg","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403630858,"sku":"P3102DU35+P6012DU55_tb","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403663626,"sku":"P3102DU35+P6012DU55_tg","price":2293.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_b461b987-1f4c-48f8-bbd8-52ffdcfd68f4.png?v=1780797072"},{"product_id":"oz-piega-aluminium-set-honda-sc82","title":"OZ Piega Aluminium Wheel Set Honda CBR 1000 RR-R SC82 (2020–2026)","description":"\u003cp\u003eEngineered to meet the demands of both road riding and circuit work, the OZ Piega forged aluminium wheel set for the Honda CBR 1000 RR-R SC82 (2020–2026) is built to the exacting safety and quality standards that have made OZ a fixture in World Superbike paddocks. Developed directly by the OZ SBK Racing division, the five-spoke Piega design dramatically reduces rotating unsprung mass — the single most effective mechanical upgrade you can make for sharper turn-in and faster lap times.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega profile conceived by the OZ SBK Racing department — race-proven geometry transferred directly to road and track use.\u003c\/li\u003e\n\u003cli\u003eForged from premium aerospace-grade aluminium for an exceptional strength-to-weight ratio and long-term structural integrity.\u003c\/li\u003e\n\u003cli\u003eSignificantly reduced rotating mass sharpens steering response, improves mid-corner agility and reduces gyroscopic resistance at high speeds.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel and one rear wheel, direct-fit replacements for the Honda CBR 1000 RR-R SC82 OEM wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium-grade bearings, aluminium angled valves and spacers (fitted only where required), plus a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's stringent manufacturing quality standards, ensuring lasting reliability on road and track.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eThe Piega range sits at the intersection of Superbike racing technology and everyday rideability. On the road, the reduction in rotating inertia makes the CBR 1000 RR-R feel noticeably lighter on its feet through direction changes and when tipping into corners. On the circuit, that same characteristic translates to faster lap times, more consistent tyre behaviour and reduced fatigue over a race stint. Because the wheels are a direct OEM replacement, there is no compromise in fit, tyre clearance or brake disc compatibility — the upgrade is entirely transparent to the rest of the machine.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finishing\u003c\/h2\u003e\u003cp\u003eOZ's Italian manufacturing facility uses closed-die forging processes under strict quality controls, producing a wheel that is both stiffer and lighter than a comparable cast unit. Each finish — gloss black anodised, techno black anodised and techno gold anodised — is applied to the same exacting standards, resisting corrosion and retaining its appearance under the thermal and mechanical stress of sustained track use. Anodising penetrates the aluminium surface rather than sitting on top of it, so the finish is an integral part of the material rather than a coating that can chip or flake.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed specifically for the Honda CBR 1000 RR-R SC82 across model years 2020 to 2026. The wheels mount directly in place of the factory wheels with no modifications required to the frame, forks, swingarm, brake calipers or brake discs. A sprocket carrier is included; however, the original Honda rear sprocket is not compatible and will need to be sourced separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: Five-spoke\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR-R SC82, model years 2020–2026\u003c\/li\u003e\n\u003cli\u003eSet contents: 1x front wheel, 1x rear wheel, premium bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eNote: Original Honda rear sprocket is not compatible — replacement sprocket required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403696394,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403729162,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403761930,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_b8836d27-5371-4ae1-a136-b975d5e384f2.png?v=1780797074"},{"product_id":"oz-piega-aluminium-set-honda-sc77","title":"OZ Piega Forged Aluminium Wheel Set Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)","description":"\u003cp\u003eConceived in OZ's Superbike Racing division and refined through years of circuit competition, the Piega wheel set brings genuine race pedigree to the Honda CBR 1000 RR and SP1 SC77. Forged from premium-grade aluminium and shaped into the Piega's iconic five-spoke silhouette, this set delivers a measurable reduction in rotating mass that transforms steering response, mid-corner agility and overall composure — whether you are threading traffic on the road or chasing lap times at a trackday.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design born in OZ's SBK Racing department — proven on the world stage before reaching the road.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction offers an exceptional strength-to-weight ratio, reducing unsprung and rotating mass for sharper turn-in and faster direction changes.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: 1x front wheel (3.50 x 17) and 1x rear wheel (5.50 x 17), direct replacements for the factory Honda CBR 1000 RR \/ SP1 SC77 (2017-2019) wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality-grade bearings, aluminium angled valves and spacer washers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eIncludes a rear sprocket carrier — note that the original Honda rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards, ensuring long-term reliability on road and track alike.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eThe Piega name carries real history in motorcycle racing. Developed by OZ's dedicated SBK Racing division, the five-spoke architecture was engineered to shed weight without compromising structural integrity — a balance that defines every OZ Racing wheel. Each spoke is profiled to maximise rigidity along the primary load paths while keeping material, and therefore rotating inertia, to an absolute minimum.\u003c\/p\u003e\u003cp\u003eThe finish options — gloss black anodised, techno black anodised and techno gold anodised — give the Piega a presence that complements the CBR 1000 RR's aggressive bodywork. Anodising is not merely cosmetic: the process hardens the aluminium surface, improving resistance to corrosion, abrasion and the thermal cycling that comes with sustained hard riding. The result is a wheel that looks as purposeful as it performs, and holds its appearance season after season.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReduced rotating mass at both ends of the motorcycle has a compounding effect on dynamic behaviour. Steering loads drop, the front wheel follows surface changes more faithfully, and the chassis reacts to body inputs with greater immediacy. At higher speeds the five-spoke structure maintains lateral stiffness, keeping tyre contact patches stable under braking and through fast direction changes. Whether the CBR 1000 RR is used primarily on public roads or committed to regular track use, the Piega set provides a tangible upgrade over the factory-fitted wheels.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Honda CBR 1000 RR and CBR 1000 RR SP1 (SC77 frame code), model years 2017 to 2019. The wheels replace the original units directly. Please note that the standard Honda rear sprocket is not compatible with the OZ sprocket carrier supplied; a suitable aftermarket rear sprocket must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3212HO35 (front) + P6245HO60 (rear)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacer washers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403827466,"sku":"P3212HO35+P6245HO60_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167403860234,"sku":"P3212HO35+P6245HO60_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167403893002,"sku":"P3212HO35+P6245HO60_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_f0ae0019-79b2-462b-896b-fb665c6167a0.png?v=1780797075"},{"product_id":"oz-piega-aluminium-felgen-set-kawasaki-zx-6r","title":"OZ Piega Forged Aluminium Wheel Set Kawasaki ZX-6R \/ 636 \/ RR (2007–2026)","description":"\u003cp\u003eBorn in the OZ SBK Racing department, the Piega five-spoke wheel set is engineered for riders who demand every fraction of a second on track — and still want a wheel that transforms the ZX-6R's dynamics on the road. Forged from premium aluminium and precision-machined in Italy, this set delivers a measurable reduction in rotating mass that sharpens steering response, lightens the front end and unlocks the agility the Kawasaki ZX-6R \/ 636 \/ RR platform is famous for.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed directly by the OZ SBK Racing division for maximum rigidity at minimum weight.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass compared to cast OEM wheels, improving acceleration, braking and mid-corner feel.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) supplied together.\u003c\/li\u003e\n\u003cli\u003eKit includes quality bearings, aluminium angled valves and spacers (where required), plus a sprocket carrier — note that the original rear sprocket is not compatible with this carrier.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for Kawasaki ZX-6R \/ 636 \/ RR (2007–2026) — no modification required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability on road and track alike.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack Performance by Design\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the highest-value upgrades available to any track-day or race rider. Lower rotating inertia means the engine's power reaches the tarmac more efficiently, braking distances shorten and the bike changes direction with a precision that standard cast wheels simply cannot match. The Piega's five-spoke architecture distributes stress evenly across the rim, resisting the lateral and radial loads generated under hard cornering and heavy braking without adding unnecessary material. Whether you are chasing lap times at a club circuit or pushing through a mountain pass, the difference is immediately felt through the bars and pegs.\u003c\/p\u003e\u003ch2\u003eBuild Quality \u0026amp; Finish\u003c\/h2\u003e\u003cp\u003eOZ's Italian factory subjects each Piega wheel to the same process used for its World Superbike and MotoGP programme components. The forging densifies the aluminium grain structure, producing a wheel that is simultaneously lighter and stronger than an equivalent cast item. Three anodised finishes are available — gloss black, techno black and techno gold — each applied to resist corrosion and maintain appearance under the heat and grime of sustained track use. The finish is integral to the alloy surface rather than painted on, so it will not chip or peel under race conditions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R (2007–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R 636 (2007–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR (2007–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImportant: the original Kawasaki rear sprocket is not compatible with the included sprocket carrier. A suitable aftermarket rear sprocket must be fitted. Spacers are included and should be used only where required for correct wheel alignment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3007KA35 (front) + P6019KA55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront rim size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear rim size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-6R \/ 636 \/ RR (2007–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403991306,"sku":"P3007KA35+P6019KA55_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404024074,"sku":"P3007KA35+P6019KA55_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167404056842,"sku":"P3007KA35+P6019KA55_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_06fe0ea1-0eff-45b8-954c-9206023dcdcd.png?v=1780797080"},{"product_id":"oz-piega-aluminium-set-kawasaki-zx-10-r-16-20","title":"OZ Piega Forged Aluminium Wheel Set – Kawasaki ZX-10 R (2016–2020)","description":"\u003cp\u003eCrafted from premium forged aluminium by OZ's dedicated SBK Racing division, the Piega wheel set represents the pinnacle of Italian wheel engineering for the Kawasaki ZX-10 R (2016–2020). Every gram saved in rotating mass translates directly into sharper turn-in, faster acceleration response and more composed high-speed stability — whether you are logging lap times or carving canyon roads.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department — purpose-built for road and track use on the ZX-10 R.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction delivers the ideal balance between structural rigidity and minimum rotating mass.\u003c\/li\u003e\n\u003cli\u003eComplete set: 3.50 x 17 front wheel and 5.50 x 17 rear wheel, directly interchangeable with the original Kawasaki rims.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium-grade bearings, aluminium angle valves and spacers (fitted where required) for a complete installation.\u003c\/li\u003e\n\u003cli\u003eRear wheel includes a sprocket carrier — note that the original rear sprocket does not fit and a compatible aftermarket unit is required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards, ensuring long-term reliability under sustained road and racing loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe Piega's forged aluminium construction is what sets it apart from cast alternatives. Forging aligns the grain structure of the aluminium, producing a wheel that is measurably stiffer and more resistant to fatigue cracking under the lateral loads generated in hard cornering. OZ's racing pedigree is embedded in every manufacturing step: the same facility and processes that supply professional Superbike teams are applied to each set that leaves the Italian factory.\u003c\/p\u003e\u003cp\u003eThe five-spoke geometry is not simply an aesthetic choice — it is the result of extensive finite element analysis carried out by the OZ SBK Racing department to optimise stiffness-to-weight ratio while allowing adequate airflow to the brake components. The reduction in unsprung and rotating mass sharpens the ZX-10 R's already-responsive character, making direction changes feel more immediate and reducing the gyroscopic resistance that heavier wheels impose on steering.\u003c\/p\u003e\u003ch2\u003eRoad and Track Performance\u003c\/h2\u003e\u003cp\u003eOn the road, the Piega set improves everyday rideability: acceleration feels more eager, braking distances benefit from the reduced inertia, and mid-corner adjustments demand less physical effort. On track, where milliseconds matter, the weight saving at the wheel translates into genuinely measurable lap time improvements. The wheels are fully road-legal and equally at home on a trackday or a Sunday morning run.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set has been specifically engineered for the Kawasaki ZX-10 R produced between 2016 and 2020. The wheels bolt on as direct replacements for the original equipment rims without modification to the swingarm, forks or brake system. A compatible aftermarket rear sprocket must be sourced separately, as the OEM sprocket is not compatible with the Piega sprocket carrier included in this set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3184KA35 (front) + P6125KA60 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R (2016–2020)\u003c\/li\u003e\n\u003cli\u003eIncluded: premium bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404089610,"sku":"P3184KA35+P6125KA60_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404122378,"sku":"P3184KA35+P6125KA60_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167404155146,"sku":"P3184KA35+P6125KA60_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_8a0f905d-7275-4666-b63e-96ed6738d8c8.png?v=1780797081"},{"product_id":"oz-piega-aluminium-set-kawasaki-zx-10-r","title":"OZ Piega Forged Aluminium Wheel Set Kawasaki ZX-10 R (2021-2026)","description":"\u003cp\u003eBorn in OZ's SBK racing division, the Piega forged aluminium wheel set for the Kawasaki ZX-10 R (2021-2026) delivers a measurable reduction in rotating mass that transforms corner entry, mid-corner agility and drive-exit response — whether you are chasing lap times on track or exploiting every kilometre of a mountain road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's Superbike racing department for maximum stiffness-to-weight ratio.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating unsprung mass, sharpening steering response and improving stability at high speed.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: one front wheel and one rear wheel supplied together.\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angled valves and spacers where required, plus a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for the factory wheels of the Kawasaki ZX-10 R (2021-2026); no modifications required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability in both road and racing conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing Pedigree, Road-Legal Execution\u003c\/h2\u003e\u003cp\u003eThe Piega range sits at the intersection of OZ's motorsport heritage and everyday usability. The five-spoke architecture is not purely aesthetic — each spoke profile is shaped to handle the asymmetric loading generated under hard braking and aggressive corner entry, conditions that a production superbike like the ZX-10 R is engineered to exploit. The forging process aligns the aluminium grain structure for greater fatigue resistance compared with cast alternatives, which matters over the course of a track day season or a high-mileage road career.\u003c\/p\u003e\u003ch2\u003eReduced Rotating Mass — Why It Matters\u003c\/h2\u003e\u003cp\u003eRotating unsprung mass is one of the most effective variables a rider can optimise without touching the engine or suspension. Lighter wheels respond faster to steering inputs, follow road or track surface irregularities more faithfully, and place less gyroscopic resistance against direction changes. The result is a ZX-10 R that feels more connected and easier to place precisely — advantages that compound with every corner of a circuit lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed specifically for the Kawasaki ZX-10 R covering model years 2021 through 2026. It replaces the original factory wheels on a direct fit basis. The included sprocket carrier is required because the stock rear sprocket is not compatible with the Piega hub. Spacers are supplied and fitted only where necessary for correct axle alignment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: 5-spoke\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel\u003c\/li\u003e\n\u003cli\u003eIncluded items: Bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R (2021-2026)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: Road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404187914,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404220682,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167404253450,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_4a315846-ac25-4ddf-8ab4-763dc3b36779.png?v=1780797085"},{"product_id":"oz-piega-aluminium-set-mv-agusta-f3","title":"OZ Piega Forged Aluminium Wheel Set for MV Agusta F3 675\/800 (2012-2026)","description":"\u003cp\u003eBuilt by OZ's renowned SBK Racing division, the Piega wheel set brings race-proven engineering to every MV Agusta F3 675\/800 rider. Forged from premium aluminium using the same processes trusted in world-level competition, these wheels meet the exacting safety and structural standards that serious road and track use demands — giving you the confidence to push harder on every corner exit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction developed by OZ's SBK Racing department for maximum structural integrity and long-term reliability.\u003c\/li\u003e\n\u003cli\u003eFive-spoke Piega design dramatically reduces rotating mass, sharpening steering response and improving agility under braking and acceleration.\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the OEM wheels on the MV Agusta F3 675\/800 across the full 2012–2026 production run.\u003c\/li\u003e\n\u003cli\u003eComplete set includes a front wheel (3.50 x 17) and a rear wheel (5.50 x 17) for a straightforward, matched upgrade.\u003c\/li\u003e\n\u003cli\u003eShips with durable bearings, aluminium angled valves, and spacers where required, plus a sprocket carrier — note that the original sprocket does not fit and a new one is required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's highest manufacturing standards for proven durability and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Developed Engineering for Road and Track\u003c\/h2\u003e\u003cp\u003eThe Piega family has its roots firmly in motorsport. OZ's SBK Racing engineers designed the five-spoke geometry to satisfy the unforgiving structural demands of superbike competition, then refined it for the real-world conditions a road rider encounters daily. The result is a wheel that does not compromise: stiff enough for precise high-speed stability, light enough to transform how the F3 675\/800 changes direction.\u003c\/p\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to improve a motorcycle's handling, and the Piega's forged aluminium achieves this without sacrificing the load-bearing strength the wheel must maintain at every lean angle. The five-spoke layout distributes stress evenly around the rim, contributing to the consistent feel that riders notice when pushing to the limit on track or threading through demanding road sections.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the MV Agusta F3 675 and F3 800 produced between 2012 and 2026. The wheels are a direct swap for the standard OEM units. Please note that the original rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket suited to the new carrier must be fitted at the time of installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3117MV35 (front) + P6026MV55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel rim size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel rim size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eFitment: MV Agusta F3 675\/800, 2012–2026\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (where applicable), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404384522,"sku":"P3117MV35+P6026MV55_sg","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404417290,"sku":"P3117MV35+P6026MV55_tb","price":2293.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167404450058,"sku":"P3117MV35+P6026MV55_tg","price":2293.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_13cc9a91-22a4-4518-9f96-9b02b3184f7e.png?v=1780797092"},{"product_id":"oz-piega-aluminium-felgen-set-suzuki-gsx-r-1000","title":"OZ Piega Forged Aluminium Wheel Set for Suzuki GSX-R 1000 (2017-2023)","description":"\u003cp\u003eBorn from OZ's Superbike racing division, the Piega wheel set carries a heritage that stretches from World SBK pit lanes straight onto your GSX-R 1000. The five-spoke forged aluminium design is not merely aesthetic — every spoke line and cross-section is engineered to strip rotational mass, sharpen turn-in response, and raise the dynamic ceiling of Suzuki's flagship litre-bike whether you're threading traffic or attacking a circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK racing department — a silhouette shaped by genuine motorsport demands, not marketing studios.\u003c\/li\u003e\n\u003cli\u003eForged from premium-grade aluminium for a superior strength-to-weight ratio over cast alternatives, delivering measurable reductions in unsprung and rotating mass.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 5.50 x 17 rear wheel — direct, hassle-free replacement for the OEM wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angled valves and spacers (fitted where required), plus a rear sprocket carrier (note: the original rear sprocket is not compatible).\u003c\/li\u003e\n\u003cli\u003eOptimised for both road and track use, bringing improved agility, faster directional changes and enhanced high-speed stability.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting production standards, ensuring long-term reliability under demanding road and racing conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Racing Heritage\u003c\/h2\u003e\u003cp\u003eThe Piega line sits at the intersection of race-bred function and Italian industrial design. The clean five-spoke architecture gives the GSX-R 1000 a purposeful, stripped-back aesthetic that complements the bike's aggressive bodywork, while the anodised finish options — gloss black, techno black and techno gold — allow you to match the wheel character to your livery. Every surface treatment is applied after forging, meaning the alloy structure beneath remains uncompromised and the finish bonds to a dimensionally precise substrate.\u003c\/p\u003e\u003cp\u003eOZ's SBK racing heritage is not decorative. The Piega profile originated in a department tasked with finding fractions of a second on the world's most demanding circuits, and that discipline carries directly into the production item you receive. The part numbers for this set are P3052SU35 (front) and P6235SU60 (rear).\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the highest-leverage modifications available to any motorcycle — the gains compound through acceleration, braking and mid-corner balance simultaneously. The Piega set's forged construction achieves this without sacrificing the structural integrity required for sustained track use. Riders moving from OEM cast wheels typically report noticeably sharper steering response and reduced effort in long, fast corners where gyroscopic forces otherwise resist direction changes.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Suzuki GSX-R 1000 model years 2017 to 2023. It replaces the original wheels on a direct-fit basis. Please note that the original rear sprocket is not compatible with the supplied sprocket carrier; a replacement sprocket sized for the OZ carrier will be required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3052SU35 (front) + P6235SU60 (rear)\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 1000, 2017-2023\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404515594,"sku":"P3052SU35+P6235SU60_sg","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404548362,"sku":"P3052SU35+P6235SU60_tb","price":2485.44,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167404581130,"sku":"P3052SU35+P6235SU60_tg","price":2485.44,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_41f65ae3-3d6a-4c79-b123-a25a4bfd8fd7.png?v=1780797097"},{"product_id":"oz-piega-aluminium-set-yamaha-r6-03-16","title":"OZ Piega Forged Aluminium Wheel Set for Yamaha YZF-R6 (2003–2016)","description":"\u003cp\u003eBorn from OZ's SBK racing programme, the Piega forged aluminium wheel set transforms the everyday riding experience of the Yamaha YZF-R6 — whether you commute on it, tour on it, or take it to the track on weekends. The five-spoke Piega design reduces rotating mass meaningfully enough to sharpen steering response and lighten the feel through corners, yet the forged construction keeps the long-term durability you need for daily use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke design developed by OZ's SBK Racing division — genuine motorsport engineering for road and track\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass, improving agility and steering response without sacrificing structural rigidity\u003c\/li\u003e\n\u003cli\u003eComplete set: 1x front wheel (3.50 x 17) and 1x rear wheel (5.50 x 17) supplied together\u003c\/li\u003e\n\u003cli\u003eHigh-quality bearings, aluminium angled valves, and spacers (fitted where required) included in the set\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — note that the original rear sprocket is not compatible and a new sprocket will be required\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for the Yamaha YZF-R6 (2003–2016): no modifications needed to the motorcycle\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards for long-term reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Value and Performance\u003c\/h2\u003e\u003cp\u003eThe Piega wheel set occupies a sweet spot that makes it appealing to riders who want a genuine upgrade without the trade-offs of a pure race product. Forged aluminium delivers the strength to handle daily road use — potholes, kerbs, and the occasional spirited commute — while the reduced unsprung and rotating weight pays dividends every time you tip into a bend. Steering feels more direct, the suspension works more effectively over imperfect surfaces, and the overall agility of the R6 takes a noticeable step forward.\u003c\/p\u003e\u003ch2\u003eTrack-Ready Construction\u003c\/h2\u003e\u003cp\u003eWhen the weekend arrives and the circuit calls, the Piega set is ready. OZ developed the five-spoke geometry in their SBK racing department specifically to balance stiffness under braking and cornering loads with the weight savings that matter at speed. The included angled aluminium valves make tyre pressure checks and adjustments easier in a pit-lane environment, and the complete bearing and spacer kit means initial fitment is straightforward without hunting for additional hardware.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the Yamaha YZF-R6 across the full 2003–2016 production run. No frame or suspension modifications are required. Please note that the original rear sprocket will not fit the supplied sprocket carrier; a new compatible rear sprocket must be sourced separately when fitting this set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3026YA35 (front) + P6032YA55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6, 2003–2016\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404646666,"sku":"P3026YA35+P6032YA55_sg","price":2585.28,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404679434,"sku":"P3026YA35+P6032YA55_tb","price":2585.28,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167404712202,"sku":"P3026YA35+P6032YA55_tg","price":2585.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_fa7c07dc-95ea-4940-9c83-b48737b476eb.png?v=1780797098"},{"product_id":"oz-piega-aluminium-set-yamaha-r1","title":"OZ Piega Forged Aluminium Wheel Set – Yamaha YZF-R1\/M RN32, RN49 \u0026 RN65 (2015–2026)","description":"\u003cp\u003eEngineered to the same exacting standards that underpin OZ's SBK Racing programme, the Piega forged aluminium wheel set is a certified, road-legal upgrade for the Yamaha YZF-R1\/M across all RN32, RN49 and RN65 generations (2015–2026). Reducing rotational mass where it matters most, these wheels sharpen steering response, improve agility and deliver the kind of confidence at high speed that only a properly certified, race-developed component can provide.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design conceived by OZ's SBK Racing division — direct lineage from the world's most demanding superbike championships.\u003c\/li\u003e\n\u003cli\u003eForged from high-grade aluminium alloy, dramatically reducing unsprung and rotational mass for sharper turn-in and more precise mid-corner feel.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's world-renowned manufacturing standards, ensuring dimensional accuracy, reliability and long-term durability.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), precision-matched for the R1\/M platform.\u003c\/li\u003e\n\u003cli\u003eSet supplied with high-quality bearings, aluminium angled valves and spacers where required, plus a sprocket carrier — note that the original rear sprocket is not compatible and a new sprocket must be sourced separately.\u003c\/li\u003e\n\u003cli\u003eDrop-in fitment: dimensionally identical to the OEM wheels, requiring no frame or swingarm modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Developed, Road-Certified\u003c\/h2\u003e\u003cp\u003eThe Piega name carries genuine racing heritage. OZ developed this five-spoke geometry within their SBK Racing department, optimising spoke curvature and cross-section for the peak loads generated during hard braking and aggressive cornering at track speed. That same engineering discipline translates directly to road riding — every input from the rider is communicated more cleanly through a wheel that flexes less and weighs less than the standard item.\u003c\/p\u003e\u003cp\u003eManufacturing takes place entirely in Italy under OZ's rigorous quality control regime. Forging the aluminium rather than casting it aligns the grain structure of the metal, producing a wheel that is simultaneously lighter and stronger — a combination that no cast wheel of equivalent weight can match.\u003c\/p\u003e\u003ch2\u003eFinish \u0026amp; Presentation\u003c\/h2\u003e\u003cp\u003eAvailable in three anodised finishes — gloss black anodised, techno black anodised and techno gold anodised — each applied to the forged aluminium surface for lasting corrosion resistance and a premium appearance that holds up under track-day conditions. The anodising process bonds the colour into the metal rather than sitting on top of it, so the finish resists stone chips and brake-dust abrasion far better than a painted equivalent.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and tested specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN32 (2015–2019)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN32 (2015–2019)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN49 (2020–2023)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN49 (2020–2023)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN65 (2024–2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN65 (2024–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: P3177YA35 (front) + P6209YA60 (rear). The OEM rear sprocket is not compatible; a suitable aftermarket sprocket must be fitted to the included sprocket carrier.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePiega\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eP3177YA35 + P6209YA60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpoke design\u003c\/th\u003e\n\u003ctd\u003e5-spoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront wheel size\u003c\/th\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear wheel size\u003c\/th\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R1\/M RN32, RN49 \u0026amp; RN65 (2015–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404843274,"sku":"P3177YA35+P6209YA60_sg","price":2585.28,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404876042,"sku":"P3177YA35+P6209YA60_tb","price":2585.28,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167404908810,"sku":"P3177YA35+P6209YA60_tg","price":2585.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_872e6f78-c1c6-4a8d-8281-79e36deaae0d.png?v=1780797104"},{"product_id":"oz-piega-aluminium-set-yamaha-r6-rj27","title":"OZ Piega Forged Aluminium Wheel Set – Yamaha YZF-R6 RJ27 (2017–2026)","description":"\u003cp\u003eThe OZ Piega wheel set brings genuine SBK-derived engineering to your Yamaha YZF-R6 RJ27 at a level you can appreciate every time you leave the garage. Forged from premium aluminium by OZ's SuperBike Racing division, the five-spoke Piega design reduces rotating mass in a meaningful, rider-felt way — sharpening steering response on the daily commute just as effectively as it does through the infield on track day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke design developed by OZ's SBK Racing department, delivering reduced rotating mass for improved agility and more responsive handling in real-world riding conditions.\u003c\/li\u003e\n\u003cli\u003eHigh-grade forged aluminium construction balances lightweight performance with the structural rigidity needed for sustained road and track use.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) — everything needed to upgrade both ends in a single purchase.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angle valves and spacers (fitted where required), plus a sprocket carrier — note that the original rear sprocket is not compatible and a new sprocket will be needed.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for the Yamaha YZF-R6 RJ27 (2017–2026); no modifications required to swap out the standard wheels.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards, ensuring long-term reliability whether the bike sees daily roads or regular circuit sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eUnlike race-only components that demand constant attention, the Piega set is engineered to perform faultlessly in ordinary riding conditions. The reduction in unsprung and rotating mass translates to less effort at the bar when threading through traffic, quicker direction changes on twisty roads, and a more settled feel under hard braking — benefits a rider notices from the very first ride, not just at the limit on a race circuit.\u003c\/p\u003e\u003ch2\u003eRoad and Track Performance\u003c\/h2\u003e\u003cp\u003eWhen the weekend calls for a track day, the Piega's motorsport lineage comes to the fore. Reduced gyroscopic effect from the lighter rotating assembly allows the R6 to tip into corners with noticeably less bar input, while greater structural stiffness compared to cast alternatives keeps tyre contact consistent under the sustained lateral and braking loads of circuit riding. The five-spoke architecture has been optimised specifically for the RJ27 generation, so the geometry and load paths are correct for the chassis rather than adapted from a generic design.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and verified for the following application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 RJ27 — model years 2017 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe wheels mount directly in place of the standard OEM wheels. Spacers are included and fitted only where the specific application requires them. A compatible aftermarket sprocket carrier is included; the original Yamaha rear sprocket will not fit and must be replaced when fitting this set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eP3177YA35 (front) + P6247YA55 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404941578,"sku":"P3177YA35+P6247YA55_sg","price":2585.28,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167404974346,"sku":"P3177YA35+P6247YA55_tb","price":2585.28,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167405007114,"sku":"P3177YA35+P6247YA55_tg","price":2585.28,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_4c5b07ea-b958-4231-8cf0-4c46f55c7720.png?v=1780797105"},{"product_id":"oz-piega-r-aluminium-set-aprilia-rsv4-09-16","title":"OZ Piega R Forged Aluminium Wheel Set – Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016)","description":"\u003cp\u003eEngineered in Italy by OZ's SBK Racing division, the Piega R wheel set represents the pinnacle of forged aluminium construction — lighter, stiffer, and more dynamically capable than the standard Piega, and built exclusively for track-focused Aprilia RSV4 riders who refuse to compromise on materials or performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers an exceptional strength-to-weight ratio, reducing rotational mass for sharper acceleration and more responsive direction changes.\u003c\/li\u003e\n\u003cli\u003eDeveloped directly by OZ's SBK Racing department — the same expertise behind championship-winning machinery transferred to your RSV4.\u003c\/li\u003e\n\u003cli\u003eComplete set includes a 3.50 x 17 front wheel and a 6.00 x 17 rear wheel, supplied with premium bearings, aluminium angle-stem valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eRear wheel includes a dedicated sprocket carrier — note that the original rear sprocket is not compatible and must be replaced accordingly.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on compatibility with the Aprilia RSV4, Factory, R, RR, and RF (2009–2016) — no modifications to the motorcycle required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: every wheel meets OZ's exacting manufacturing standards for surface finish, dimensional accuracy, and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing Pedigree, Uncompromising Build Quality\u003c\/h2\u003e\u003cp\u003eThe Piega R is not a restyled road wheel — it is a racing wheel conceived from the outset for track use. The forging process aligns the grain structure of the aluminium, producing a wheel that is demonstrably stronger and lighter than cast equivalents of the same dimension. That reduction in unsprung and rotational mass translates directly into faster turn-in, improved mid-corner stability, and more exploitable corner-exit traction — advantages that are immediately felt the moment you tip the RSV4 into a braking zone.\u003c\/p\u003e\u003cp\u003eAvailable in an anodised techno black or anodised techno gold finish, both colourways are applied after machining to protect the aluminium surface and maintain the precision of the spoke profiles. The anodising is not a cosmetic afterthought: it provides a hard, corrosion-resistant layer that withstands the thermal and mechanical stresses of repeated track sessions.\u003c\/p\u003e\u003ch2\u003eTrack Use Notice\u003c\/h2\u003e\u003cp\u003eThe OZ Piega R wheel set is designed and homologated for track use only. It is not intended for road registration or road riding. Riders should ensure compliance with the regulations of their relevant racing series or track day organiser before fitting.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a confirmed direct fitment for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 Factory (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009–2016)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eR30663507 (front) + R60966007 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e6.00 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised (techno black or techno gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eFront wheel, rear wheel, bearings, aluminium angle-stem valves, spacers (where required), sprocket carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405039882,"sku":"R30663507+R60966007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167405072650,"sku":"R30663507+R60966007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt.png?v=1780797106"},{"product_id":"oz-piega-r-aluminium-set-aprilia-rsv4-17-20","title":"OZ Piega R Forged Aluminium Wheel Set – Aprilia RSV4\/1100 Factory\/RF\/RR (2017–2020)","description":"\u003cp\u003eForged from premium aluminium in Italy and engineered exclusively for track use, the OZ Piega R wheel set represents the pinnacle of the renowned Piega lineage. Shedding rotational mass beyond what the standard Piega achieves, these five-spoke wheels transform the handling of the Aprilia RSV4\/1100 Factory, RF and RR into something sharper, faster and more responsive — lap after lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers the optimal balance of structural rigidity and reduced unsprung weight for serious track riding.\u003c\/li\u003e\n\u003cli\u003eReduced rotational mass produces noticeably quicker acceleration, sharper corner entry and improved stability under braking.\u003c\/li\u003e\n\u003cli\u003eClassic five-spoke Piega R design — lighter than the standard Piega model — available in anodised techno black or anodised techno gold finish.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 6.00 x 17 rear wheel, direct-fit replacements for the OEM Aprilia wheels.\u003c\/li\u003e\n\u003cli\u003ePremium inclusions as standard: quality bearings, aluminium angle valves, spacers (where required) and a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy — OZ Racing's hallmark of precision manufacture and exceptional durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eEvery Piega R wheel starts life as a solid block of aerospace-grade aluminium billet, forged under high pressure to align the grain structure of the metal for maximum fatigue resistance. The result is a wheel that is not merely light, but genuinely strong — capable of withstanding the repeated, high-load stress cycles that track riding demands. The anodised finish is applied after machining, creating a hard, chemically bonded surface layer that resists corrosion, abrasion and the heat generated in a demanding race environment far better than paint ever could.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe Piega R series exists for one purpose: to make a motorcycle faster around a circuit. By cutting rotational inertia at both ends of the bike, these wheels allow the RSV4 engine's considerable power to translate into forward motion more efficiently. Steering inputs become crisper because the gyroscopic effect of heavy wheels is diminished, and the suspension can react more freely to surface changes when the wheels themselves are lighter. For riders chasing consistent lap times, the difference between the Piega R and a heavier OEM wheel is felt immediately — not only in outright acceleration, but in the confidence with which the bike can be pushed to its limits.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct, like-for-like replacement for the factory wheels fitted to the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 RF (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: the sprocket carrier included in the set is not compatible with the original Aprilia rear sprocket. A replacement sprocket suitable for the OZ carrier must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e6.00 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised (techno black or techno gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003eR30663507 (front) + R60966007 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405138186,"sku":"R30663507+R60966007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167405170954,"sku":"R30663507+R60966007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_b5a552f1-568a-482e-926c-bf17263aa4b3.png?v=1780797108"},{"product_id":"oz-piega-r-aluminium-set-aprilia-rsv4-21","title":"OZ Piega R Forged Aluminium Wheel Set for Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026)","description":"\u003cp\u003eBorn from OZ's decades of motorsport heritage and hand-finished in Italy, the Piega R wheel set brings genuine race-bred design to the Aprilia RSV4 platform. The signature five-spoke architecture is not merely aesthetic — it is the result of rigorous track engineering to cut rotating mass to a minimum, transforming the way the RSV4 responds to rider input in every corner.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers maximum structural rigidity with a dramatically reduced overall weight compared to cast alternatives.\u003c\/li\u003e\n\u003cli\u003eReduced rotating mass sharpens acceleration response, improves braking feel and makes direction changes noticeably more precise on circuit.\u003c\/li\u003e\n\u003cli\u003eLighter than the standard OZ Piega, the Piega R is the dedicated track-day variant engineered for riders who demand more from every session.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (6.00 x 17) — everything you need in a single box.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium durable bearings, aluminium angle valves and spacers (fitted where required), plus a sprocket carrier — note that the original Aprilia sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect-fit compatibility with the Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026) means no fabrication or modification is needed at the hub.\u003c\/li\u003e\n\u003cli\u003eMade in Italy — every wheel is manufactured and finished to the exacting standards OZ has upheld since their founding in motorsport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Finish\u003c\/h2\u003e\u003cp\u003eThe Piega R is offered in two anodised finishes that complement the RSV4's aggressive Italian styling. Techno Black anodised gives the wheel a deep, understated presence that pairs with virtually every livery, while Techno Gold anodised references OZ's storied racing history and adds a bold visual signature that stands out in the pit lane and on the podium alike. Both finishes are applied through a hard-anodising process that resists corrosion, abrasion and the thermal cycling inherent to track use — so the wheels look as sharp after a full season as they did on day one.\u003c\/p\u003e\u003ch2\u003eTrack Performance\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the highest-value modifications available to any track rider. Less rotating inertia means the engine spends less energy accelerating the wheel itself, translating directly into crisper throttle response and more linear deceleration under braking. The Piega R's five-spoke profile achieves this without compromising the stiffness the RSV4's suspension geometry demands, keeping tyre contact consistent and feedback accurate lap after lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and homologated specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 — 2021 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2021 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 — 2021 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory — 2021 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImportant: the original Aprilia rear sprocket is not compatible with the supplied sprocket carrier. A replacement sprocket must be fitted during installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R30663507 (front) + R60966007 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 6.00 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eSpoke design: five-spoke\u003c\/li\u003e\n\u003cli\u003eFinish options: techno black anodised \/ techno gold anodised\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ race circuit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405629706,"sku":"R30663507+R60966007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167405662474,"sku":"R30663507+R60966007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_5d3f3e77-a246-4a3f-a478-79470f15765c.png?v=1780797114"},{"product_id":"oz-piega-r-aluminium-felgen-set-bmw-s1000rr-k46","title":"OZ Piega R Aluminium Wheel Set BMW S1000RR K46 (2009-2018)","description":"\u003cp\u003eUpgrade the BMW S1000RR K46 (2009-2018) with a wheel set that delivers genuine, measurable gains on every ride. The OZ Piega R forged aluminium wheel set cuts rotational mass compared to the stock cast wheels, translating directly into sharper turn-in, more responsive braking and a livelier feel at both road and track pace — all backed by Italian precision manufacturing that OZ has refined over decades of motorsport.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces rotational mass over standard cast wheels, improving acceleration, braking and handling response\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) — everything needed for a straightforward swap\u003c\/li\u003e\n\u003cli\u003eHigh-quality bearings, aluminium angle valves and spacers (where required) supplied in the box\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included, as the original carrier cannot be reused with these wheels\u003c\/li\u003e\n\u003cli\u003eAvailable in Techno Black anodised or Techno Gold anodised — both finishes suited to a wide range of S1000RR liveries\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for K46 models equipped with cast wheels (2009-2018)\u003c\/li\u003e\n\u003cli\u003eMade in Italy — part numbers R30673507 (front) and R60976007 (rear)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Long-Term Value\u003c\/h2\u003e\u003cp\u003eUnlike dedicated carbon fibre race wheels that demand constant inspection and careful daily handling, the Piega R's forged aluminium structure is robust enough for regular road miles as well as track days. The weight saving over the factory cast wheels is meaningful without the cost or fragility of exotic materials, making this set a practical long-term investment for riders who want a genuine performance upgrade without compromising day-to-day convenience.\u003c\/p\u003e\u003cp\u003eFitting is uncomplicated: the Piega R set is engineered specifically for the K46 chassis, so wheel fitment, brake disc spacing and chain alignment are correct from the outset. The included sprocket carrier removes the guesswork from rear-end assembly, and the supplied bearings and valves mean no last-minute trips to source ancillaries.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eEach wheel is forged and machined at OZ's facility in Italy, a process that aligns the aluminium grain structure for maximum strength at minimum weight. The Techno Black and Techno Gold anodised finishes are applied to the alloy surface itself, not a painted coating, so the colour is durable and resistant to the scuffs and stone chips that come with hard riding. Both colourways are a direct nod to OZ's motorsport heritage and look purposeful alongside the angular bodywork of the K46 generation S1000RR.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K46 produced between 2009 and 2018. It is compatible only with models originally equipped with cast wheels. If your machine left the factory with forged or carbon wheels, please verify fitment before ordering. The sprocket carrier supplied in the set is mandatory — the original BMW rear sprocket carrier must not be reused.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 (2009-2018), cast-wheel models\u003c\/li\u003e\n\u003cli\u003ePart numbers: R30673507 (front) + R60976007 (rear)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405826314,"sku":"R30673507+R60976007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167405859082,"sku":"R30673507+R60976007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_acca122c-1983-4923-8818-7cfe8ea56744.png?v=1780797119"},{"product_id":"oz-piega-r-aluminium-felgen-set-bmw-s1000rr-k67-mit-m","title":"OZ Piega R Aluminium Wheel Set BMW S1000RR K67 with M Package Hub (2019-2026)","description":"\u003cp\u003eEngineered for riders who demand every advantage on circuit, the OZ Piega R aluminium wheel set is purpose-built for the BMW S1000RR K67 fitted with the M Package hub. Forged from premium aluminium using advanced lightweight construction, these wheels shed rotating mass with precision Italian craftsmanship — translating directly into sharper turn-in, improved acceleration, and enhanced grip lap after lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightweight forged aluminium construction reduces rotating mass compared to standard Piega models, delivering noticeably quicker steering and stronger acceleration out of corners.\u003c\/li\u003e\n\u003cli\u003eTrack-optimised design developed specifically to handle the extreme loads of circuit riding, making the Piega R the natural choice for performance-focused S1000RR owners.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: includes one front wheel rim (3.50 x 17) and one rear wheel rim (5.50 x 17), supplied with high-quality bearings, aluminium angle valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — necessary because the original M Package carrier is not compatible with the Piega R rear wheel.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — Techno Black and Techno Gold — for a purposeful, race-bred aesthetic that sets the S1000RR apart in the paddock or on the road.\u003c\/li\u003e\n\u003cli\u003eExclusive M Package fitment: designed specifically for the BMW S1000RR K67 (2019-2026) equipped with the M Package forged or carbon wheel hub, offering a direct OEM-equivalent exchange.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eItalian Precision, Track-Proven Performance\u003c\/h2\u003e\u003cp\u003eMade in Italy, the Piega R is the product of OZ's decades of motorsport heritage. Every wheel is forged — not cast — from high-grade aluminium, ensuring an exceptional strength-to-weight ratio that cast alternatives simply cannot match. The result is a wheel that responds to rider inputs with an immediacy that is immediately apparent from the first session out of the pit lane.\u003c\/p\u003e\u003cp\u003eThe reduced unsprung and rotating mass also allows the S1000RR's suspension to work more effectively, keeping the tyre in contact with the track surface through the roughest of corners. Whether you are chasing personal bests at a track day or competing in a club championship, the Piega R gives you a measurable, tangible edge.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is exclusively compatible with the BMW S1000RR K67 (2019-2026) fitted with the M Package (models originally equipped with OZ forged aluminium or carbon fibre wheels from the factory). It is a direct replacement for the OEM M Package wheels and is not suitable for standard S1000RR models without the M hub specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R32323507 + R2706007\u003c\/li\u003e\n\u003cli\u003eFront rim size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear rim size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (Techno Black or Techno Gold)\u003c\/li\u003e\n\u003cli\u003eIncludes: bearings, aluminium angle valves, spacers (where required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K67 (2019-2026) with M Package hub\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405891850,"sku":"R32323507+R2706007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167405924618,"sku":"R32323507+R2706007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_b1272379-9977-4fe0-95bc-964b985bd470.png?v=1780797122"},{"product_id":"oz-piega-r-aluminium-set-bmw-s1000rr-k46-hp-aufnahme","title":"OZ Piega R Forged Aluminium Wheel Set – BMW S1000RR K46 with HP Hub (2009–2018)","description":"\u003cp\u003eForged from premium aluminium in Italy and engineered exclusively for track use, the OZ Piega R wheel set brings a level of material quality and rotational-mass reduction that the standard Piega cannot match. Every gram saved at the rim translates directly into sharper turn-in, quicker direction changes and more responsive braking on your BMW S1000RR K46.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eConstructed from high-grade forged aluminium for an exceptional strength-to-weight ratio that outperforms cast alternatives\u003c\/li\u003e\n\u003cli\u003eLower rotational mass than the standard OZ Piega, delivering measurably improved ride dynamics under race conditions\u003c\/li\u003e\n\u003cli\u003eComplete set: front wheel (3.50 x 17) and rear wheel (5.50 x 17) supplied together\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angle valves and spacers (fitted where required)\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — the original carrier is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eAvailable in anodised Techno Black or anodised Techno Gold for a purposeful, race-oriented finish\u003c\/li\u003e\n\u003cli\u003eManufactured in Italy to the exacting tolerances OZ Racing is renowned for in top-level motorsport\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eForged Construction and Finish\u003c\/h2\u003e\u003cp\u003eThe Piega R's forged aluminium construction is what sets it apart from the wider OZ wheel range. Forging aligns the grain structure of the alloy, producing a wheel that is stiffer and more resistant to fatigue than a cast equivalent at equivalent or lower weight. The result on track is a wheel that holds its line under hard braking, resists flex through fast corners and maintains consistent tyre contact with the surface.\u003c\/p\u003e\u003cp\u003eThe anodised finish — available in Techno Black or Techno Gold — is applied directly to the aluminium, not painted over it. Anodising penetrates the surface rather than sitting on top, meaning the colour is genuinely durable and resistant to the heat, fuel splash and abrasion that a track environment demands.\u003c\/p\u003e\u003ch2\u003eTrack-Only Engineering\u003c\/h2\u003e\u003cp\u003eThe Piega R is developed specifically for circuit use and is not homologated for road registration. This single-minded focus allows OZ to optimise every aspect of the design — spoke geometry, hub interface, spoke cross-section — for outright performance rather than legislative compromise. Riders who take their S1000RR to track days or compete in circuit championships will notice the difference immediately in how the bike responds to inputs.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed specifically for the BMW S1000RR K46 equipped with HP forged wheel hubs, covering model years 2009 to 2018. The set is a direct replacement for the original HP wheels on those machines. Because the OZ Piega R uses its own sprocket carrier geometry, the original BMW sprocket carrier cannot be reused — a compatible carrier is supplied as part of this set. Installation should be carried out by a qualified mechanic familiar with wheel bearing and sprocket carrier fitment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (Techno Black or Techno Gold)\u003c\/li\u003e\n\u003cli\u003eIncludes: bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003ePart numbers: R31303507 + R60976007\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 with HP hub (2009–2018)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black anodised","offer_id":53167405957386,"sku":"R31303507+R60976007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold anodised","offer_id":53167405990154,"sku":"R31303507+R60976007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_91ba92ab-c3ac-4b8c-90ca-b2995d2d004e.png?v=1780797123"},{"product_id":"oz-piega-r-aluminium-felgen-set-bmw-k66","title":"OZ Piega R Forged Aluminium Wheel Set BMW M1000RR K66 (2021-2026)","description":"\u003cp\u003eEngineered exclusively for track use, the OZ Piega R aluminium wheel set delivers the certified, competition-grade construction that serious BMW M1000RR K66 racers demand. As the lightweight evolution of OZ's acclaimed Piega line, the R-series wheels are forged in Italy to the exacting standards that make OZ a fixture in world-class motorsport — bringing measurably reduced rotational mass to every corner entry and straight-line launch on your K66.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged high-grade aluminium construction provides exceptional rigidity with the lowest possible rotational mass, directly sharpening acceleration and mid-corner agility.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 1x front wheel (3.50 x 17) and 1x rear wheel (6.00 x 17), supplied with premium bearings, aluminium angled valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eIncludes a dedicated rear sprocket carrier — note that the original BMW rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003ePrecision-matched fitment for the BMW M1000RR K66 (2021-2026), fully dimensionally compatible with the factory wheel specification.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — Techno Black or Techno Gold — for a purposeful, race-ready aesthetic.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: manufactured under OZ's rigorous motorsport quality standards for consistency and precision.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering\u003c\/h2\u003e\u003cp\u003eThe Piega R sits above the standard Piega in OZ's catalogue precisely because of its reduced rotating mass. On the BMW M1000RR K66, where every fraction of a second matters, lighter wheels translate directly into faster direction changes, stronger braking response, and crisper acceleration out of slow corners. The forged aluminium construction maintains the structural integrity required under race loadings while stripping away every gram that does not serve performance.\u003c\/p\u003e\u003ch2\u003eImportant Safety Notice\u003c\/h2\u003e\u003cp\u003eThe OZ Piega R wheel set is designed and certified for closed-circuit track use only. These wheels are not approved for road use. Riders must ensure that the original BMW rear sprocket is replaced with a compatible unit before fitting the supplied sprocket carrier. Installation should be carried out by a qualified technician familiar with competition wheel fitment procedures.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is specifically engineered for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eBMW M1000RR K66 — model years 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe wheels are dimensionally compatible with the original BMW M1000RR K66 wheel envelope. Sprocket carrier is included; original rear sprocket requires replacement.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003eR3066BM35+R6096BM60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e6.00 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAvailable finishes\u003c\/td\u003e\n\u003ctd\u003eTechno Black anodised, Techno Gold anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black anodised","offer_id":53167406022922,"sku":null,"price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold anodised","offer_id":53167406055690,"sku":null,"price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_921c2391-b6f3-490f-adea-288254884014.png?v=1780797128"},{"product_id":"oz-piega-r-aluminium-felgen-set-ducati-panigale-959","title":"OZ Piega R Aluminium Wheel Set – Ducati Panigale 959 (2016–2019)","description":"\u003cp\u003eBorn on the track and shaped by decades of Italian motorsport heritage, the OZ Piega R wheel set transforms the Ducati Panigale 959 into a sharper, more responsive machine. Forged from high-grade aluminium and finished in an anodised techno coat, these wheels are the definitive upgrade for riders who demand race-day precision from every corner entry.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLighter than the standard Piega series — reduced rotating mass sharpens steering response and improves acceleration out of corners.\u003c\/li\u003e\n\u003cli\u003eFive-spoke forged aluminium construction delivers the ideal balance of rigidity and weight savings for track use.\u003c\/li\u003e\n\u003cli\u003eComplete set includes a front wheel (3.50 x 17) and rear wheel (5.50 x 17), supplied with quality bearings, aluminium angled valves and spacers.\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — the OEM carrier is not compatible and must be replaced with the supplied unit.\u003c\/li\u003e\n\u003cli\u003eAvailable in two exclusive anodised finishes: Techno Black and Techno Gold — both engineered to resist corrosion and retain their appearance under hard use.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory wheels on the Ducati Panigale 959 (2016–2019) — no fabrication or custom machining required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eItalian Craftsmanship, Race-Bred Purpose\u003c\/h2\u003e\u003cp\u003eOZ Racing has supplied wheels to MotoGP and World Superbike teams for over fifty years, and the Piega R carries that lineage into the hands of serious trackday riders. Every set is manufactured in Italy to exacting tolerances, ensuring concentricity and balance that cheaper cast alternatives simply cannot match. The anodised finish is applied after machining, penetrating the aluminium surface rather than sitting on top of it — the result is a wheel that looks as purposeful on the paddock stand as it does through a fast sweeper.\u003c\/p\u003e\u003ch2\u003ePerformance on the Road and Track\u003c\/h2\u003e\u003cp\u003eThe Piega R's primary design goal is the elimination of unnecessary rotating mass. Every gram shed from the wheel's rim and spoke section reduces the gyroscopic effect, making the Panigale 959 more willing to tip into corners and quicker to respond to steering inputs on the way out. The forged construction also maintains stiffness under the lateral loads generated by sticky track tyres, so the feedback through the chassis remains clean and trustworthy at the limit. While these wheels are optimised for track use, their direct-fit compatibility means road riders chasing the last word in refinement will appreciate them equally.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct fitment for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe included rear sprocket carrier is required for installation; the original OEM carrier cannot be reused. Always verify fitment against your specific model year before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Numbers\u003c\/th\u003e\n\u003ctd\u003eR31083507 + R61855507\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront Wheel Size\u003c\/th\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear Wheel Size\u003c\/th\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eAnodised (Techno Black \/ Techno Gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 959 (2016–2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167406252298,"sku":"R31083507+R61855507_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167406285066,"sku":"R31083507+R61855507_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_efea8009-7da5-42eb-b35f-3936120d7d50.png?v=1780797131"},{"product_id":"oz-piega-r-aluminium-felgen-set-ducati-panigale-1199","title":"OZ Piega R Forged Aluminium Wheel Set – Ducati Panigale 1199\/R\/S (2012–2017)","description":"\u003cp\u003eFor riders who demand every possible advantage on track, the OZ Piega R wheel set strips away unsprung and rotating mass with a precision-forged aluminium construction that goes a significant step further than the standard Piega range. Designed exclusively for circuit use, these wheels transform the handling of the Ducati Panigale 1199, 1199R and 1199S — sharper turn-in, crisper throttle response and the kind of agility that only comes from genuinely reducing what spins between you and the tarmac.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision-forged aluminium construction — lighter and stiffer than cast alternatives, with greater mass reduction than the standard OZ Piega wheel\u003c\/li\u003e\n\u003cli\u003eReduced rotating mass improves acceleration response and cornering agility at the limits of track pace\u003c\/li\u003e\n\u003cli\u003e5-spoke Piega R design engineered for high-speed stability and consistent handling across the entire tyre contact patch\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set included: 3.50 x 17 front wheel and 6.00 x 17 rear wheel\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angled valves and spacers (fitted as required), plus a sprocket carrier — note that the original Ducati rear sprocket is not compatible and a new sprocket will be required\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the standard wheels on the Ducati Panigale 1199\/R\/S (2012–2017)\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for maximum durability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe Piega R is OZ's highest-specification forged aluminium wheel for the Panigale 1199 platform. By reducing rotational inertia beyond what the standard Piega achieves, the set gives the 1199's chassis a noticeably more responsive character — the engine's torque translates into forward motion faster, and direction changes feel lighter and more precise. Whether you are chasing lap times at a club day or competing in a series, the difference is tangible from the first session.\u003c\/p\u003e\u003ch3\u003eConstruction and Finish\u003c\/h3\u003e\u003cp\u003eEach wheel is forged from high-grade aluminium alloy and finished to your choice of anodised techno black or anodised techno gold — both hard-wearing finishes suited to the demands of repeated track use. The complete set carries part numbers R31083507 (front) and R61476007 (rear).\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe OZ Piega R wheel set is engineered as a direct replacement for the factory wheels on the following motorcycles:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199R (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199S (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: these wheels are developed exclusively for track use and are not intended for road use. The original Ducati rear sprocket is not compatible with the supplied sprocket carrier; a suitable replacement sprocket must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 6.00 x 17\u003c\/li\u003e\n\u003cli\u003ePart numbers: R31083507 (front) + R61476007 (rear)\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167406317834,"sku":"R31083507+R61476007_tb","price":2430.71,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167406350602,"sku":"R31083507+R61476007_tg","price":2430.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaRSetBlackMatt.png?v=1780797133"},{"product_id":"oz-piega-r-aluminium-set-ducati-panigale-899","title":"OZ Piega R Forged Aluminium Wheel Set for Ducati Panigale 899 (2013-2016)","description":"\u003cp\u003eThe OZ Piega R wheel set is one of the most practical upgrades you can make to a Ducati Panigale 899, delivering a genuine reduction in unsprung and rotating mass that sharpens steering response and improves everyday rideability — whether you are filtering through traffic or pushing hard on a favourite road. Forged in Italy to OZ Racing's exacting standards, these five-spoke wheels are engineered to replace the standard items without fuss, at a price point that makes the performance gain genuinely accessible.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction developed by the OZ SBK Racing department reduces rotating mass for sharper throttle response and more precise steering.\u003c\/li\u003e\n\u003cli\u003eFive-spoke Piega R design saves meaningful weight over the standard cast wheels, improving acceleration, braking and mid-corner agility.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 5.50 x 17 rear wheel supplied together.\u003c\/li\u003e\n\u003cli\u003eHigh-quality bearings, aluminium angled valves and spacers (fitted only where required) are included — ready to bolt on.\u003c\/li\u003e\n\u003cli\u003eA rear sprocket carrier is included in the set, as the original Panigale 899 carrier is not compatible with these wheels.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — Techno Black and Techno Gold — to suit understated and high-visibility builds alike.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: manufactured with the precision and quality control that OZ Racing has brought to world championship paddocks for decades.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Everyday Value\u003c\/h2\u003e\u003cp\u003eOZ's forging process aligns the grain structure of the aluminium, producing a wheel that is stiffer and more consistent than a comparable cast item while retaining the material to handle real-world impacts. The Piega R is not a fragile track-only exotic — it is a well-balanced upgrade that rewards you on every ride. The anodised finish is durable enough for road use and resists the brake dust and road grime that a track-only wheel never has to face. For a Panigale 899 owner who wants better hardware without constant maintenance headaches, this set makes sound practical sense.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReduced rotating inertia means the engine does less work to accelerate and decelerate the wheels, which translates into crisper response when you open the throttle out of a corner and shorter stopping distances when you brake hard for the next. The five-spoke geometry balances lateral stiffness — keeping the tyre contact patch stable under load — against the mass savings that make the difference you can actually feel. Riders who occasionally attend track days will notice the improvement most clearly in slow-to-medium-speed corners where the 899's steering can feel slightly heavy on standard equipment.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a direct replacement for the original wheels on the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 899 — model years 2013, 2014, 2015, 2016\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe included sprocket carrier is required because the original Panigale 899 rear sprocket carrier is not compatible with the OZ hub design. All necessary bearings, angled aluminium valves and spacers are supplied with the set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eR31083507 (front) + R61855507 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish options\u003c\/td\u003e\n\u003ctd\u003eTechno Black anodised \/ Techno Gold anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 899 (2013-2016)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167406383370,"sku":"R31083507+R61855507_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167406416138,"sku":"R31083507+R61855507_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_fbc0b977-3ca5-45d8-8bbd-5605c856e070.png?v=1780797135"},{"product_id":"oz-piega-r-aluminium-set-ducati-panigale-1299-s","title":"OZ Piega R Forged Aluminium Wheel Set – Ducati Panigale 1299\/S (2015-2018)","description":"\u003cp\u003eForged from high-grade aluminium in Italy and engineered exclusively for track use, the OZ Piega R wheel set delivers a measurable reduction in rotating mass compared to the standard Piega – translating directly into sharper turn-in, faster direction changes and improved stability at race speeds on the Ducati Panigale 1299\/S.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction offers an exceptional strength-to-weight ratio, reducing unsprung and rotating mass beyond what the standard Piega achieves\u003c\/li\u003e\n\u003cli\u003eFive-spoke design engineered for outstanding high-speed stability and responsive handling on circuit\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 6.00 x 17 rear wheel supplied together\u003c\/li\u003e\n\u003cli\u003eIncludes durable bearings, aluminium angled valves and spacers where required, plus a sprocket carrier (note: the original rear sprocket is not compatible and must be replaced)\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment for the Ducati Panigale 1299\/S (2015–2018) – no modifications required beyond standard fitting procedure\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ Racing's exacting quality standards, ensuring long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track\u003c\/h2\u003e\u003cp\u003eThe Piega R sits at the top of OZ's road-race wheel hierarchy. Where the standard Piega already outperforms cast alternatives, the R variant goes further, shaving additional rotating mass to benefit acceleration response and braking deceleration alike. Every gram saved at the rim translates into a more immediate, communicative ride – the kind of gain a rider feels from the first session out of the pit lane.\u003c\/p\u003e\u003ch2\u003eItalian Forged Quality\u003c\/h2\u003e\u003cp\u003eOZ has produced forged aluminium wheels for factory race teams and World Superbike competitors for decades. The Piega R carries that manufacturing heritage into a package designed specifically for track-day riders and club racers who demand race-team components without compromise. The forging process aligns the aluminium grain structure for superior fatigue resistance under the repeated stress cycles of hard braking and aggressive cornering.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and validated specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 1299 and 1299 S – model years 2015, 2016, 2017 and 2018\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eImportant: the original Ducati rear sprocket is not compatible with the supplied sprocket carrier. A replacement sprocket suitable for the OZ carrier must be fitted. Part numbers: R31083507 (front) + R61476007 (rear).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e6.00 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003eR31083507 + R61476007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1299 \/ 1299 S (2015–2018)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167406579978,"sku":"R31083507+R61476007_tb","price":2430.71,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167406612746,"sku":"R31083507+R61476007_tg","price":2430.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaRSetBlackMatt_46b8445a-4e25-4321-a107-1f27ab4a8131.png?v=1780797138"},{"product_id":"oz-piega-r-aluminium-set-ducati-panigale-v4-s","title":"OZ Piega R Forged Aluminium Wheel Set for Ducati Panigale V4\/S\/R (2018-2024)","description":"\u003cp\u003eEngineered for riders who demand every advantage from their Panigale V4, the OZ Piega R wheel set delivers a measurable reduction in rotating mass over the standard Piega range — translating directly into sharper turn-in, quicker steering response and a more connected feel across a full day on track or a spirited road ride. Manufactured in Italy from premium forged aluminium, these wheels represent OZ's highest-specification fitment for the Ducati Panigale V4\/S\/R (2018-2024).\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction saves weight versus cast alternatives, reducing unsprung and rotating mass for noticeably improved handling dynamics.\u003c\/li\u003e\n\u003cli\u003eFive-spoke race-optimised design balances torsional rigidity with controlled flex, delivering stability under hard braking and precise feedback through fast corners.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set included: 3.50 x 17 front wheel and 5.50 x 17 rear wheel, ready to bolt straight onto the Panigale V4\/S\/R.\u003c\/li\u003e\n\u003cli\u003eSupplied with durable bearings, aluminium angled valves and spacers where required, plus a sprocket carrier — note that the original rear sprocket is not compatible and a new sprocket must be fitted.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for Ducati Panigale V4, V4 S and V4 R model years 2018 through 2024 — no modification required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: every Piega R wheel carries OZ's renowned Italian manufacturing quality and long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track and Road\u003c\/h2\u003e\u003cp\u003eThe Piega R sits at the top of OZ's Ducati-specific wheel programme. Where the standard Piega already outperforms factory wheels, the Piega R takes the concept further with an even lighter forged structure. On a circuit, the reduction in rotating inertia allows the Panigale V4 to change direction more effortlessly between apexes and responds with greater immediacy when the throttle opens. On the road, the same properties translate into a wheel that feels alive without being nervous — comfort and confidence go hand in hand over a long riding day.\u003c\/p\u003e\u003cp\u003eThe five-spoke layout is not purely aesthetic. The geometry is calculated to handle the extreme braking and lateral loads generated by modern supersport tyres, making the Piega R equally at home in a track-day paddock and on a challenging mountain pass.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese wheels are designed exclusively for the Ducati Panigale V4, Panigale V4 S and Panigale V4 R across all model years from 2018 to 2024. They are a direct replacement for the factory wheels with no frame or swingarm modification needed. A compatible sprocket carrier is included, however the original Ducati rear sprocket will not fit and a suitable replacement sprocket must be sourced separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R31083507 (front) + R61476007 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eSpoke design: five-spoke\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R, 2018-2024\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167406842122,"sku":"R31083507+R61476007_tb","price":2430.71,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167406874890,"sku":"R31083507+R61476007_tg","price":2430.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaRSetBlackMatt_7176b84b-e414-4900-8c09-3f51df9d84ac.png?v=1780797144"},{"product_id":"oz-piega-r-aluminium-felgen-set-honda-sc77","title":"OZ Piega R Forged Aluminium Wheel Set Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)","description":"\u003cp\u003eBuilt exclusively for track use, the OZ Piega R wheel set takes racing performance on the Honda CBR 1000 RR \/ SP1 SC77 to a level beyond the standard Piega range. Through forged aluminium construction and a relentless focus on reducing rotational mass, these wheels deliver the kind of handling precision and acceleration response that serious circuit riders demand.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces rotational mass compared to cast alternatives, sharpening steering response and acceleration out of every corner.\u003c\/li\u003e\n\u003cli\u003eLighter and more agile than the standard OZ Piega, developed exclusively for track-day and racing applications on the CBR 1000 RR \/ SP1 SC77.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: front wheel 3.50 x 17, rear wheel 5.50 x 17 — direct OEM replacement sizing for the SC77 platform.\u003c\/li\u003e\n\u003cli\u003eEach wheel ships fully prepared with quality-grade bearings, anodised aluminium angle valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eIncludes a dedicated sprocket carrier, as the original rear sprocket carrier is not compatible with the Piega R hub design.\u003c\/li\u003e\n\u003cli\u003eAvailable in two premium anodised finishes: Techno Black and Techno Gold — both purpose-designed to complement race liveries.\u003c\/li\u003e\n\u003cli\u003eMade in Italy with the precision manufacturing standards OZ Racing is renowned for on circuits worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering\u003c\/h2\u003e\u003cp\u003eThe Piega R is not a road-going upgrade dressed in racing clothing — it is an OZ wheel engineered from the outset for circuit duty. The forged aluminium process aligns the grain structure of the material, producing a wheel that handles the repeated stress of hard braking zones and aggressive kerb strikes without adding unnecessary mass. Every gram saved at the rim translates directly into reduced gyroscopic effect, meaning the CBR 1000 RR turns in faster and holds a tighter line through technical sections.\u003c\/p\u003e\u003ch2\u003eConstruction \u0026amp; Finish\u003c\/h2\u003e\u003cp\u003eBoth the 3.50 x 17 front and 5.50 x 17 rear wheels are anodised rather than painted, giving the finish genuine resistance to the brake dust, heat cycles, and tyre mounting stresses of regular track use. Techno Black offers a stealthy, understated look that suits factory-inspired CBR liveries, while Techno Gold delivers a bold contrast finish favoured on dedicated race machines. Anodising penetrates the aluminium surface rather than sitting on top of it, so the colour cannot chip or flake under race conditions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a direct OEM-interchange fitment for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR 1000 RR SC77 (2017, 2018, 2019)\u003c\/li\u003e\n\u003cli\u003eHonda CBR 1000 RR SP1 SC77 (2017, 2018, 2019)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: the original sprocket carrier is not compatible with the Piega R rear hub. A replacement sprocket carrier is included in the set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Numbers\u003c\/th\u003e\n\u003ctd\u003eR32133507 (front) + R62496007 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront Wheel Size\u003c\/th\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear Wheel Size\u003c\/th\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eAnodised (Techno Black \/ Techno Gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eHonda CBR 1000 RR \/ SP1 SC77 (2017-2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167407071498,"sku":"R32133507+R62496007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167407104266,"sku":"R32133507+R62496007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_11b7a032-c51b-47c7-9ca1-b14b18ff4736.png?v=1780797150"},{"product_id":"oz-piega-r-aluminium-set-ducati-panigale-v2","title":"OZ Piega R Forged Aluminium Wheel Set for Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eEngineered exclusively for riders who demand the absolute most from every lap, the OZ Piega R wheel set is a step beyond the already capable standard Piega range. Forged from high-grade aluminium and conceived entirely around track use, these wheels shed rotational mass where it matters most — delivering sharper turn-in, faster direction changes, and a level of agility that transforms the Ducati Panigale V2 955 from a brilliant road bike into a genuine circuit weapon.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces rotational mass significantly compared to the standard Piega, sharpening acceleration and braking response across every straight and hairpin.\u003c\/li\u003e\n\u003cli\u003eDistinctive five-spoke design combines exceptional torsional stiffness with the weight savings only premium forging can achieve.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (6.00 x 17) — everything needed to replace the stock wheels in a single purchase.\u003c\/li\u003e\n\u003cli\u003eEach set comes with high-quality bearings, aluminium angled valves, spacers where required, and a dedicated rear sprocket carrier (note: the original rear sprocket does not fit).\u003c\/li\u003e\n\u003cli\u003eDirect replacement fit for the Ducati Panigale V2 955 (2020-2024) with no modifications required to the motorcycle.\u003c\/li\u003e\n\u003cli\u003eManufactured in Italy under OZ's renowned production standards, ensuring long-term reliability whether the wheels see weekly track days or demanding road sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Track, Exceptional on the Road\u003c\/h2\u003e\u003cp\u003eThe Piega R series sits at the top of OZ's road and track wheel range. The forging process aligns the aluminium grain structure for maximum strength at minimum mass, meaning you gain the confidence of a stiff, responsive wheel without carrying unnecessary weight into braking zones. On a chassis as capable as the Panigale V2 955, that reduction in unsprung and rotational mass is immediately perceptible — the front end follows your inputs with greater fidelity, and corner exits feel more controlled as the lighter rear tracks the tarmac surface rather than bouncing over it.\u003c\/p\u003e\u003cp\u003eThe five-spoke geometry is not simply a styling choice. Each spoke is shaped to channel load efficiently between hub and rim, resisting the flex that can blunt steering feel on heavier cast alternatives. The anodised finish — available in techno black or techno gold — is durable enough to tolerate the abrasive environment of a pit lane and attractive enough to elevate the look of the bike on road.\u003c\/p\u003e\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\u003cp\u003eThe set ships as part numbers R31083507 (front) and R61476007 (rear), covering the complete wheel replacement for the Panigale V2 955. Bearings, aluminium angled valves, and any necessary spacers are included. A rear sprocket carrier is also supplied, as the original Ducati rear sprocket is not compatible with the Piega R hub.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese wheels are developed and optimised specifically for the Ducati Panigale V2 955 across model years 2020 to 2024. They are a direct replacement for the original equipment wheels and require no additional machining or adaptation to the frame, swingarm, or fork.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e6.00 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003eR31083507 (front) + R61476007 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish options\u003c\/td\u003e\n\u003ctd\u003eTechno black anodised, techno gold anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167407137034,"sku":"R31083507+R61476007_tb","price":2430.71,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167407169802,"sku":"R31083507+R61476007_tg","price":2430.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaRSetBlackMatt_2888207d-fb05-4dc3-b67a-93151b87e898.png?v=1780797150"},{"product_id":"oz-piega-r-aluminium-set-honda-sc77","title":"OZ Piega R Forged Aluminium Wheel Set – Honda CBR 1000 RR SP2 SC77 (2017–2019)","description":"\u003cp\u003eEngineered for riders who demand the very best from every session, the OZ Piega R aluminium wheel set transforms the Honda CBR 1000 RR SP2 SC77 (2017–2019) through a meaningful reduction in unsprung and rotating mass. Forged in Italy with the precision OZ Racing is renowned for, the Piega R represents a refined evolution of the classic Piega design — lighter, stiffer, and purpose-built for track use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged from high-grade aluminium for an outstanding balance of low weight and structural rigidity, reducing rotating mass compared to cast OEM wheels.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 5.50 x 17 rear wheel, both ready for immediate fitment.\u003c\/li\u003e\n\u003cli\u003eEach wheel is supplied with quality bearings, aluminium angled valves, and spacers where required — everything needed for a clean swap.\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included in the set; note that the original OEM rear sprocket is not compatible and a new sprocket must be fitted.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — Techno Black and Techno Gold — both resistant to the rigours of track use.\u003c\/li\u003e\n\u003cli\u003eHandcrafted in Italy, meeting OZ Racing's exacting manufacturing standards for motorsport applications.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance \u0026amp; Construction\u003c\/h2\u003e\u003cp\u003eThe Piega R is built around OZ's forged aluminium process, which produces a denser, more uniform grain structure than casting. The result is a wheel that handles the punishing forces of repeated hard braking, high-speed cornering, and aggressive acceleration without adding unnecessary weight to the rotating assembly. Reduced rotational inertia means the CBR 1000 RR SP2 responds more keenly to throttle inputs and direction changes — benefits that are felt lap after lap rather than just on paper.\u003c\/p\u003e\u003cp\u003eThe anodised finish is applied after machining, providing a surface that is integral to the metal rather than sitting on top of it. Both Techno Black and Techno Gold retain their appearance under the heat and chemical exposure typical of track environments, including tyre warmers and brake dust.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed specifically for the Honda CBR 1000 RR SP2 SC77 produced between 2017 and 2019. The wheels replace the original equipment items on a direct-fitment basis. Important: the OEM rear sprocket carrier is not retained — the included replacement carrier must be used, and a compatible aftermarket or OZ-specified rear sprocket is required. Always verify axle dimensions and brake disc compatibility before fitting.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eFinish: Anodised (Techno Black \/ Techno Gold)\u003c\/li\u003e\n\u003cli\u003eIncludes: Bearings, aluminium angled valves, spacers (where applicable), sprocket carrier\u003c\/li\u003e\n\u003cli\u003ePart numbers: R32273507 (front) + R62496007 (rear)\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR SP2 SC77 (2017–2019)\u003c\/li\u003e\n\u003cli\u003eMade in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black anodised","offer_id":53167407202570,"sku":"R32273507+R62496007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold anodised","offer_id":53167407235338,"sku":"R32273507+R62496007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_a0f2924b-cf2a-4e8e-8731-47bf028f281d.png?v=1780797152"},{"product_id":"oz-piega-r-aluminium-set-honda-sc82","title":"OZ Piega R Forged Aluminium Wheel Set for Honda CBR 1000 RR-R SC82 (2020-2026)","description":"\u003cp\u003eThe OZ Piega R wheel set brings genuine track-focused engineering to your Honda CBR 1000 RR-R SC82 without demanding a full race programme to justify it. Forged in Italy from high-grade aluminium, this front and rear pair delivers a measurable reduction in rotating mass compared with the standard Piega range — translating directly into sharper turn-in, faster acceleration response and a bike that simply feels more alive beneath you, whether you are chasing lap times or enjoying a spirited road session.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction combines the lowest possible weight with the structural rigidity required for demanding track and road conditions.\u003c\/li\u003e\n\u003cli\u003eReduced rotating mass sharpens throttle response and improves agility — changes you feel immediately, not just on a data logger.\u003c\/li\u003e\n\u003cli\u003eComplete set: 1x front wheel (3.50 x 17) and 1x rear wheel (6.00 x 17) supplied together, so fitment is a single job.\u003c\/li\u003e\n\u003cli\u003eDirect-fit compatibility with the Honda CBR 1000 RR-R SC82 (2020-2026) — bolts up using the same mounting points as the OEM wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with durable bearings, aluminium angled valves and spacers (included where required), plus a rear sprocket carrier — note the original rear sprocket does not fit and must be replaced.\u003c\/li\u003e\n\u003cli\u003eManufactured in Italy under OZ's exacting quality standards for maximum performance and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred, Road-Ready\u003c\/h2\u003e\u003cp\u003eOZ developed the Piega R exclusively for circuit use, but the real-world benefit is straightforward: less unsprung and rotating weight means the suspension works more effectively, braking distances shorten and the steering follows your inputs rather than fighting them. The five-spoke design is the result of finite-element analysis refined over decades of OZ's involvement in motorcycle racing, so every gram saved is intentional.\u003c\/p\u003e\u003cp\u003eFor CBR 1000 RR-R owners who attend track days regularly, the Piega R set offers a meaningful upgrade over the factory wheels without requiring the complexity of a full custom build. The anodised finish — available in techno black or techno gold — also keeps the wheel looking sharp after repeated heat cycles and tyre changes.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and tested specifically for the Honda CBR 1000 RR-R SC82 covering model years 2020 to 2026. It replaces the OEM front and rear wheels on a direct-fit basis. Please note that the original rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket suitable for the OZ carrier must be sourced separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 6.00 x 17\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR-R SC82 (2020-2026)\u003c\/li\u003e\n\u003cli\u003ePart number: P3247HO35 + P6290HO60\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: Track and road\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167407300874,"sku":"P3247HO35+P6290HO60_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167407333642,"sku":"P3247HO35+P6290HO60_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_ca227780-8764-44e2-9e1f-71b6d16449cb.png?v=1780797159"},{"product_id":"oz-piega-r-aluminium-set-kawasaki-zx-10-r-16-20","title":"OZ Piega R Aluminium Wheel Set Kawasaki ZX-10 R (2016-2020)","description":"\u003cp\u003eEngineered for the track and built to win, the OZ Piega R aluminium wheel set transforms the Kawasaki ZX-10 R (2016-2020) into a sharper, faster, more responsive machine. Forged from premium aluminium and produced with Italian precision, the Piega R is the next step beyond the standard Piega — lighter, more agile, and built for riders who demand the absolute maximum from every corner entry and exit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass for dramatically improved acceleration, braking response and mid-corner agility\u003c\/li\u003e\n\u003cli\u003eEven lighter than the standard OZ Piega — purpose-designed for uncompromising track performance\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: front wheel 3.50 x 17, rear wheel 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eEach wheel supplied with quality bearings, aluminium angled valves and spacers where required\u003c\/li\u003e\n\u003cli\u003eIncludes a rear sprocket carrier, as the original OEM carrier is not compatible with this wheel set\u003c\/li\u003e\n\u003cli\u003eAvailable in anodised Techno Black and anodised Techno Gold for a distinctive, personalised finish\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for Kawasaki ZX-10 R 2016-2020 — no modification required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Performance\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the most effective ways to sharpen a motorcycle's dynamics, and the OZ Piega R wheel set achieves this through forged aluminium construction and a race-focused design philosophy. Lower rotational inertia means the ZX-10 R responds faster to throttle inputs, brakes with greater precision and changes direction with noticeably less effort — advantages that compound lap after lap. Whether you are chasing a personal best at a track day or competing at club level, the Piega R gives you the mechanical edge to do it.\u003c\/p\u003e\u003ch2\u003eItalian Precision, Race-Ready Quality\u003c\/h2\u003e\u003cp\u003eMade in Italy, OZ Racing's manufacturing heritage spans decades of motorsport at the highest levels, from World Superbike to Formula 1. The Piega R reflects that pedigree: tight tolerances, consistent balancing, and a finish — Techno Black or Techno Gold anodised — that holds up under the heat and stress of hard track use. The anodised surface is not merely cosmetic; it provides a durable, corrosion-resistant layer that keeps the wheels looking sharp through seasons of competition.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a direct fitment for the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eKawasaki ZX-10 R — model years 2016, 2017, 2018, 2019, 2020\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eNote: the original OEM rear sprocket carrier is not compatible with the Piega R rear wheel. A replacement sprocket carrier is included in the set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Numbers\u003c\/th\u003e\n\u003ctd\u003eR31853507 + R61286007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront Wheel Size\u003c\/th\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear Wheel Size\u003c\/th\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eAnodised (Techno Black \/ Techno Gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncludes\u003c\/th\u003e\n\u003ctd\u003eFront wheel, rear wheel, bearings, aluminium angled valves, spacers (where required), rear sprocket carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eKawasaki ZX-10 R 2016-2020\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black anodised","offer_id":53167407366410,"sku":"R31853507+R61286007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold anodised","offer_id":53167407399178,"sku":"R31853507+R61286007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_35d8f62c-1177-4c49-b94c-d652743bf4dd.png?v=1780797159"},{"product_id":"oz-piega-r-aluminium-set-kawasaki-zx-6r","title":"OZ Piega R Forged Aluminium Wheel Set – Kawasaki ZX-6R \/ 636 \/ RR (2007–2026)","description":"\u003cp\u003eBorn on the track and shaped by decades of Italian motorsport heritage, the OZ Piega R wheel set redefines what a Kawasaki ZX-6R, 636 or RR can feel like beneath you. Forged from premium aluminium and finished in a race-ready anodised coat, these wheels shed rotational mass where it matters most — delivering sharper turn-in, faster direction changes and a level of precision that stock wheels simply cannot match.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces unsprung and rotational mass for measurably improved agility and handling response on circuit.\u003c\/li\u003e\n\u003cli\u003eLighter than the standard Piega series — the Piega R is engineered exclusively for track use, prioritising minimum weight over road compliance.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: front wheel 3.50 x 17 and rear wheel 5.50 x 17, supplied with quality bearings, aluminium angle valves and spacers (fitted where required).\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — necessary because the OEM rear sprocket carrier is not compatible with the Piega R hub design.\u003c\/li\u003e\n\u003cli\u003eAvailable in two premium anodised finishes: Techno Black and Techno Gold, both offering a distinctive, race-paddock aesthetic straight out of the box.\u003c\/li\u003e\n\u003cli\u003eMade in Italy — manufactured to OZ Racing's exacting motorsport tolerances, the same standards trusted by factory World Superbike and MotoGP programmes.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eOZ Racing has been supplying wheels to the world's fastest racing teams for over five decades, and the Piega R carries that lineage directly to the privateer racer. The spoke architecture is sculpted to balance stiffness with material removal, giving each wheel its characteristic lean silhouette without compromising structural integrity under braking and cornering loads.\u003c\/p\u003e\u003cp\u003eThe Techno Black anodised finish delivers a stealth, circuit-professional appearance that pairs naturally with the ZX-6R's aggressive bodywork. The Techno Gold option references a long tradition of OZ Racing motorsport liveries — instantly recognisable in the paddock and on the podium. Both finishes are applied through an anodising process that bonds colour into the aluminium surface rather than sitting on top of it, ensuring the look endures track sessions, tyre warmers and repeated wheel cleaning.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotational inertia at the wheel is one of the most effective modifications a track rider can make. Less rotating mass means the engine works less to accelerate the wheel, brakes are more effective because there is less momentum to scrub off, and the steering feels lighter and more responsive through chicanes. The Piega R's weight advantage over the standard Piega series compounds these benefits, making it the preferred choice for riders chasing lap times rather than dual-purpose versatility.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a direct replacement for the original wheels on the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R — model years 2007 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R 636 — model years 2007 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR — model years 2007 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNote: the sprocket carrier supplied in this set must be used, as the original OEM sprocket carrier is not compatible with the Piega R rear hub.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R30463507 (front) + R61295507 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (Techno Black or Techno Gold)\u003c\/li\u003e\n\u003cli\u003eIncludes: bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ motorsport\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black anodised","offer_id":53167407431946,"sku":"R30463507+R61295507_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold anodised","offer_id":53167407464714,"sku":"R30463507+R61295507_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_a3ef4a81-db57-411e-8b45-97f4f0abe70f.png?v=1780797161"},{"product_id":"oz-piega-r-aluminium-set-kawasaki-zx-10-r","title":"OZ Piega R Forged Aluminium Wheel Set Kawasaki ZX-10 R (2021-2026)","description":"\u003cp\u003eCrafted from precision-forged aluminium in Italy, the OZ Piega R wheel set represents the pinnacle of the legendary Piega lineage — engineered exclusively for track use on the Kawasaki ZX-10 R (2021-2026). The reduced rotating mass and uncompromising construction quality translate directly into sharper acceleration, heightened agility, and faster lap times.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePrecision-forged aluminium construction delivers exceptional rigidity with a dramatically reduced unsprung and rotating mass compared to cast alternatives.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 6.00 x 17 rear wheel, supplied with high-quality bearings, aluminium angle valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eIncludes a sprocket carrier as standard — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the factory wheels on the Kawasaki ZX-10 R (2021-2026) — no modification required.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes: Techno Black and Techno Gold, each applied for lasting corrosion resistance and track-ready aesthetics.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ Racing's exacting tolerances — the same manufacturing standards trusted by MotoGP and Superbike teams worldwide.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eForged Quality That Earns Its Place on Track\u003c\/h2\u003e\u003cp\u003eThe Piega R sits at the top of OZ's road-racing wheel hierarchy, and the material choice reflects that ambition. Forged aluminium is inherently denser and more homogeneous than cast aluminium, eliminating the micro-porosity that can compromise structural integrity under sustained high-load cornering. Every spoke profile is optimised to remove excess material without sacrificing stiffness, so the wheel flexes predictably and returns feedback through the chassis rather than absorbing it.\u003c\/p\u003e\u003cp\u003eOn a ZX-10 R at full tilt, that feedback loop matters enormously. The reduced rotational inertia means the front end responds to steering inputs with less effort, and the rear hooks up out of slow corners with noticeably less wheel spin. Riders stepping up to track days or club racing will feel the difference from the first session.\u003c\/p\u003e\u003ch2\u003eFinish and Durability\u003c\/h2\u003e\u003cp\u003eBoth colour options — Techno Black and Techno Gold — are achieved through an anodising process that penetrates the aluminium surface rather than sitting on top of it. The result is a finish that resists track grime, tyre sealants, and repeated brake-disc heat cycles without peeling or flaking. The anodised surface also provides a degree of corrosion protection that extends the visual life of the wheels well beyond a painted equivalent.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the standard OEM wheels fitted to the Kawasaki ZX-10 R across model years 2021 to 2026. A sprocket carrier is included in the set; however, the original Kawasaki rear sprocket will not fit the new carrier and must be sourced separately. All necessary bearings, aluminium angle valves, and spacers (where applicable) are included to complete the installation.\u003c\/p\u003e\u003cp\u003ePart number: R3066KA35 + R6125KA60\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 6.00 x 17\u003c\/li\u003e\n\u003cli\u003eFinish: Anodised (Techno Black \/ Techno Gold)\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R (2021-2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ racing\u003c\/li\u003e\n\u003cli\u003ePart number: R3066KA35 + R6125KA60\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black anodised","offer_id":53167407628554,"sku":null,"price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold anodised","offer_id":53167407661322,"sku":null,"price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_c27a24ab-eda2-45b5-a421-193c08f076b3.png?v=1780797164"},{"product_id":"oz-piega-r-aluminium-set-mv-agusta-f3","title":"OZ Piega R Aluminium Wheel Set for MV Agusta F3 675\/800 (2012-2026)","description":"\u003cp\u003eThe OZ Piega R wheel set gives MV Agusta F3 675\/800 riders a direct, meaningful upgrade that is just as rewarding on a Sunday road ride as it is on a track day. Engineered in Italy and developed in close collaboration with the OZ SBK Racing Team, this front-and-rear aluminium set replaces the stock wheels directly, delivering a noticeable drop in rotating mass without any complicated modification to your bike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLighter than the standard OZ Piega, the Piega R reduces rotating mass for sharper turn-in response and stronger acceleration out of corners.\u003c\/li\u003e\n\u003cli\u003eExclusive five-spoke design created by the OZ SBK Racing Team, balancing structural rigidity with the lowest possible weight.\u003c\/li\u003e\n\u003cli\u003eDirect fitment for MV Agusta F3 675 and F3 800 (2012-2026) — a straightforward swap with no frame or brake modifications required.\u003c\/li\u003e\n\u003cli\u003eComplete set includes front wheel, rear wheel, quality bearings, aluminium angle valves, and spacers (supplied where required). A sprocket carrier is also included, as the original sprocket carrier is not compatible.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — techno black and techno gold — for a clean, lasting appearance that holds up to road and track use.\u003c\/li\u003e\n\u003cli\u003eMade in Italy, carrying OZ's hallmark precision manufacturing and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating weight is one of the most effective ways to transform the feel of a motorcycle, and the Piega R makes that improvement accessible to riders who want genuine performance gains without a full race-prep budget. The lighter wheel assembly allows the suspension to react more faithfully to road surface changes, improves high-speed stability, and makes the steering feel more alive at every speed. Whether you are carrying pace through fast motorway bends or threading through tight chicanes on circuit, the reduction in gyroscopic inertia translates into a bike that changes direction with noticeably less effort.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eEvery Piega R set is manufactured in Italy using high-grade aluminium and finished with an anodised surface treatment that resists corrosion and abrasion. The five-spoke architecture is not purely cosmetic — it is the result of finite-element analysis carried out by OZ's engineering team to place material precisely where structural loads demand it, trimming weight everywhere else. The included quality bearings and aluminium angle valves mean the set arrives ready to fit without sourcing additional hardware.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the MV Agusta F3 675 and MV Agusta F3 800, covering all model years from 2012 to 2026. The original sprocket carrier is not compatible; a replacement sprocket carrier is included in the set. No modifications to the brake system or swingarm are required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R31283507 (front) + R60265507 (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (techno black or techno gold)\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke\u003c\/li\u003e\n\u003cli\u003eContents: front wheel, rear wheel, bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: MV Agusta F3 675 \/ F3 800 (2012-2026)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167408546058,"sku":"R31283507+R60265507_tb","price":2430.71,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167408578826,"sku":"R31283507+R60265507_tg","price":2430.71,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaRSetBlackMatt_23ab18d5-3cf4-45b1-a4ef-9f3dd69dcc8e.png?v=1780797169"},{"product_id":"oz-piega-r-aluminium-set-suzuki-gsx-r-1000","title":"OZ Piega R Forged Aluminium Wheel Set for Suzuki GSX-R 1000 (2017-2023)","description":"\u003cp\u003eBorn in OZ's SBK Racing division, the Piega R wheel set brings genuine racetrack engineering to your Suzuki GSX-R 1000. The five-spoke forged aluminium construction sheds rotational mass where it matters most, sharpening steering response and agility in a way that immediately transforms how the bike feels through corners.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke forged aluminium design developed by OZ's SBK Racing department for measurable weight savings over standard cast wheels\u003c\/li\u003e\n\u003cli\u003eReduced rotational mass delivers noticeably quicker turn-in and improved agility — the kind of gain you feel from the first lap\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set included, along with bearings, aluminium angled valves, and spacers where required\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included as standard, since the original GSX-R 1000 sprocket carrier is not compatible\u003c\/li\u003e\n\u003cli\u003eDirect, like-for-like fitment replacing the factory wheels on the Suzuki GSX-R 1000 (2017-2023)\u003c\/li\u003e\n\u003cli\u003eManufactured in Italy with the precision tolerances demanded by professional racing teams\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — techno black and techno gold — to suit your build aesthetic\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Construction, Real-World Reward\u003c\/h2\u003e\u003cp\u003eThe Piega R is not a road wheel with a racing name attached. It was conceived and validated within OZ's SBK competition programme, where every gram of unsprung and rotational weight has a direct consequence on lap times and rider feel. The five-spoke geometry is optimised for stiffness-to-weight ratio, so the wheel resists flex under hard braking and aggressive cornering loads while remaining as light as the design allows. That engineering intent translates directly to a more communicative, responsive GSX-R 1000 whether you are chasing lap times or simply want the most capable version of your machine on track days.\u003c\/p\u003e\u003ch2\u003eComplete and Ready to Fit\u003c\/h2\u003e\u003cp\u003eOZ supplies the Piega R as a genuine set rather than individual wheels, so front and rear are matched in finish and specification. Bearings, aluminium angled valves, and any necessary spacers are included, and a dedicated sprocket carrier is supplied to replace the incompatible original unit. The result is a straightforward swap with no need to source additional hardware — everything required for a clean installation arrives in the box.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the following model:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki GSX-R 1000 — model years 2017, 2018, 2019, 2020, 2021, 2022, 2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: the Piega R is intended exclusively for track use. Always verify fitment with your mechanic before installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Numbers\u003c\/th\u003e\n\u003ctd\u003eR30533507 (front) + R62376007 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpoke design\u003c\/th\u003e\n\u003ctd\u003e5-spoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish options\u003c\/th\u003e\n\u003ctd\u003eTechno black anodised, techno gold anodised\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eSuzuki GSX-R 1000 (2017-2023)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003eTrack use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167408677130,"sku":"R30533507+R62376007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167408709898,"sku":"R30533507+R62376007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_24246fe8-25eb-4b66-912d-e78f068d0b34.png?v=1780797176"},{"product_id":"oz-piega-r-aluminium-set-yamaha-r6-03-16","title":"OZ Piega R Aluminium Wheel Set for Yamaha YZF-R6 (2003–2016)","description":"\u003cp\u003eWhen lap times and rider confidence depend on every kilogram of rotating mass, the OZ Piega R wheel set delivers where it counts. Engineered in Italy to the exacting standards that have made OZ a fixture in World Superbike paddocks, these aluminium wheels are built specifically for the Yamaha YZF-R6 (2003–2016) and are measurably lighter than the standard Piega — translating directly into sharper turn-in, faster direction changes and greater confidence at speed.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eSignificantly reduced rotating mass compared to the standard OZ Piega, with a direct improvement in agility and steering precision on track\u003c\/li\u003e\n\u003cli\u003eFive-spoke design developed by the OZ SBK Racing division, balancing structural rigidity with minimum weight\u003c\/li\u003e\n\u003cli\u003eSupplied as a complete front and rear set, each wheel fitted with quality bearings, aluminium angled valves and spacers (fitted as required)\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — the original Yamaha rear sprocket carrier is not compatible and must be replaced with the supplied unit\u003c\/li\u003e\n\u003cli\u003eAvailable in anodised Techno Black or anodised Techno Gold — both finished to a standard that withstands the thermal and mechanical stresses of serious track use\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory wheels on the Yamaha YZF-R6 across the full 2003–2016 production run\u003c\/li\u003e\n\u003cli\u003eManufactured in Italy under OZ's stringent production quality controls\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Construction\u003c\/h2\u003e\u003cp\u003eThe Piega R was conceived for riders who treat the road as a warm-up for the circuit. The five-spoke aluminium architecture is the result of OZ's SBK Racing department's ongoing development work — the same division that supplies wheels to factory-supported teams. Reduced rotational inertia means the engine's power reaches the tarmac more efficiently, braking distances tighten and the front end communicates with a clarity that stock cast wheels simply cannot match.\u003c\/p\u003e\u003ch2\u003eFinish and Anodising\u003c\/h2\u003e\u003cp\u003eBoth colour options — Techno Black and Techno Gold — are achieved through a hard anodising process that bonds to the aluminium at a molecular level rather than sitting on the surface like paint. The result is a finish that resists stone chips, brake dust and the repeated heat cycles that destroy lesser surface treatments. Each shade carries its own visual signature: Techno Black is purposeful and understated, while Techno Gold references OZ's long racing heritage without sacrificing the wheel's aggressive character.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct-fit replacement for the Yamaha YZF-R6 across all model years from 2003 to 2016. The set includes all hardware required for installation. Note that the original Yamaha rear sprocket carrier is not compatible — the replacement carrier included in this set must be used. No modification to the frame or swingarm is required.\u003c\/p\u003e\u003cp\u003ePart numbers: R30323507 (front) + R60885507 (rear)\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: Anodised (Techno Black or Techno Gold)\u003c\/li\u003e\n\u003cli\u003eDesign: 5-spoke, SBK Racing developed\u003c\/li\u003e\n\u003cli\u003ePart numbers: R30323507 + R60885507\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6, 2003–2016\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167408742666,"sku":"R30323507+R60885507_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167408775434,"sku":"R30323507+R60885507_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_05e9a424-ae37-48d4-966e-0cd57e5864ab.png?v=1780797176"},{"product_id":"oz-piega-r-aluminium-set-yamaha-r6-rj27","title":"OZ Piega R Aluminium Wheel Set Yamaha YZF-R6 RJ27 (2017-2026)","description":"\u003cp\u003eEngineered to meet the exacting safety and performance standards of competitive track use, the OZ Piega R aluminium wheel set delivers measurably lower rotating mass than the standard Piega range — translating directly into sharper turn-in, greater agility at high speed, and more precise rider feedback on the Yamaha YZF-R6 RJ27 (2017–2026). Manufactured in Italy under OZ's renowned quality controls, these wheels represent the benchmark for serious track-day and racing applications.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTrack-optimised construction: designed exclusively for circuit use by OZ's SBK Racing division, with structural integrity built around the demands of competitive riding.\u003c\/li\u003e\n\u003cli\u003eLower rotating mass than the standard Piega range, delivering a measurable gain in agility, acceleration response and braking performance.\u003c\/li\u003e\n\u003cli\u003eFive-spoke architecture derived directly from OZ's Superbike racing programme, balancing outstanding stiffness with optimised dynamic behaviour.\u003c\/li\u003e\n\u003cli\u003eComplete set: includes one front wheel and one rear wheel, each supplied with quality bearings, aluminium angle valves and spacers (fitted where required), plus a dedicated sprocket carrier — necessary because the original rear sprocket is not compatible.\u003c\/li\u003e\n\u003cli\u003ePrecision Made in Italy: OZ's Italian manufacturing heritage ensures tight tolerances and consistent quality across every unit.\u003c\/li\u003e\n\u003cli\u003eDirect fitment replacement: the set exchanges with the factory wheels on the Yamaha YZF-R6 RJ27 without modification to the motorcycle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Design from OZ Racing\u003c\/h2\u003e\u003cp\u003eThe Piega R sits at the top of OZ's road-legal wheel hierarchy for circuit riders. Where the standard Piega already outperforms OEM aluminium wheels, the R variant sheds additional mass through tighter engineering tolerances and an optimised spoke profile — a development that originated on OZ's SBK race machines before being adapted for the Yamaha YZF-R6 platform. The result is a wheel that responds immediately to rider input, reduces gyroscopic resistance under direction change, and sustains structural integrity through the sustained lateral loads of track cornering.\u003c\/p\u003e\u003ch2\u003eWhat's Included in the Set\u003c\/h2\u003e\u003cp\u003eOZ supply the Piega R as a ready-to-fit package so there are no unexpected additional purchases. Each set contains the front and rear wheels complete with high-quality bearings already installed, aluminium angle valves, and the required spacers. A dedicated sprocket carrier is also included in the box, as the original Yamaha rear sprocket cannot be used with the Piega R hub design. Installation requires only standard workshop tools and mirrors the process of a conventional wheel swap.\u003c\/p\u003e\u003ch2\u003eColour Options\u003c\/h2\u003e\u003cp\u003eThe Piega R wheel set is available in two anodised finishes: Techno Black and Techno Gold. Both options carry the same OZ Racing five-spoke profile; the colour choice allows riders to complement their YZF-R6's livery or make a deliberate visual statement on circuit.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis OZ Piega R wheel set is specifically engineered for the Yamaha YZF-R6 RJ27, covering model years 2017 through to 2026. It is designed as a direct replacement for the factory wheel set on that platform. Note that these wheels are intended exclusively for track\/racing use and are not homologated for public road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R31813507 (front) + R62485507 (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (Techno Black or Techno Gold)\u003c\/li\u003e\n\u003cli\u003eDesign: 5-spoke, developed by OZ SBK Racing division\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6 RJ27 (2017–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ racing only\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eManufacturing origin: Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167408840970,"sku":"R31813507+R62485507_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167408873738,"sku":"R31813507+R62485507_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_80e597f1-66b9-46cd-b773-45bd989a966c.png?v=1780797180"},{"product_id":"oz-piega-r-aluminium-felgen-set-yamaha-r1","title":"OZ Piega R Aluminium Wheel Set Yamaha YZF-R1\/M RN32, RN49 \u0026 RN65 (2015-2026)","description":"\u003cp\u003eEngineered by OZ's SBK Racing division specifically for the Yamaha YZF-R1 and YZF-R1M, the Piega R aluminium wheel set delivers a meaningful reduction in rotating mass over the standard fitment — translating directly into sharper turn-in, more responsive handling and a ride quality that stays composed lap after lap. Whether you're chasing personal bests on track or simply demanding the best from your R1 on the road, these forged Italian wheels reward every input with precision.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass compared to OEM wheels, improving acceleration, braking response and overall agility.\u003c\/li\u003e\n\u003cli\u003eFive-spoke Piega R design developed by OZ's SBK Racing department for genuine track-focused performance under extreme conditions.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for Yamaha YZF-R1 and YZF-R1M (RN32, RN49 and RN65, 2015-2026) — no modifications required.\u003c\/li\u003e\n\u003cli\u003eComplete set includes front wheel, rear wheel, all necessary bearings, aluminium angled valves and spacers where required.\u003c\/li\u003e\n\u003cli\u003eDedicated sprocket carrier included, as the original rear sprocket carrier is not compatible with the Piega R hub design.\u003c\/li\u003e\n\u003cli\u003eAvailable in two exclusive anodised finishes: Techno Black and Techno Gold — both manufactured and finished in Italy.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack Performance Without Compromise\u003c\/h2\u003e\u003cp\u003eThe Piega R was conceived from the outset for Superbike racing, and every element of its design reflects that origin. The five-spoke forged aluminium structure achieves the stiffness-to-weight ratio that serious track riders demand, keeping tyre contact patch behaviour predictable and consistent through high-speed corners and under hard braking. Reduced gyroscopic effect means the R1 changes direction with noticeably less effort, a quality that compounds over a full race session when fatigue becomes a factor.\u003c\/p\u003e\u003ch2\u003eRefined Finish, Italian Craftsmanship\u003c\/h2\u003e\u003cp\u003eMade in Italy, each wheel is finished to OZ's exacting standards. The anodised Techno Black and Techno Gold options are not simply cosmetic choices — the anodising process adds a layer of corrosion resistance that keeps the wheels looking sharp across seasons of hard use. The clean spoke geometry and precision machined surfaces make these wheels as visually arresting in the paddock as they are effective on circuit.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 (RN32) — 2015-2017\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M (RN32) — 2015-2017\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 (RN49) — 2018-2020\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M (RN49) — 2018-2020\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 (RN65) — 2021-2026\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M (RN65) — 2021-2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: the original OEM sprocket carrier is not compatible. A dedicated sprocket carrier is included in the set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart Number: R31813507 + R62106007\u003c\/li\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: 5-spoke\u003c\/li\u003e\n\u003cli\u003eFinish: Anodised (Techno Black \/ Techno Gold)\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1 \/ YZF-R1M RN32, RN49, RN65 (2015-2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167409266954,"sku":"R31813507+R62106007_tb","price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167409299722,"sku":"R31813507+R62106007_tg","price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_511340d2-4a64-44b3-96c8-bfda532ae4ed.png?v=1780797185"},{"product_id":"oz-gass-rs-a-aluminium-set-aprilia-rsv4-09-16","title":"OZ Gass RS-A Forged Aluminium Wheel Set – Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016)","description":"\u003cp\u003eEngineered to perform across every ride — from your morning commute to a track day at Misano — the OZ Gass RS-A forged aluminium wheel set brings genuine racing pedigree to the Aprilia RSV4 without compromising everyday usability. Reduced rotating mass sharpens steering response and improves agility the moment you roll out of the garage, making each ride feel more precise and rewarding than the last.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers a significant weight saving over cast OEM wheels, cutting unsprung and rotating mass for crisper turn-in and better overall handling.\u003c\/li\u003e\n\u003cli\u003eEqually at home on road or track — originally developed for circuit use, the Gass RS-A is fully road-legal and suited to riders who do both without compromise.\u003c\/li\u003e\n\u003cli\u003eReduced rotating mass translates directly into more responsive steering: direction changes feel lighter, more intuitive and immediate.\u003c\/li\u003e\n\u003cli\u003eFour anodised colour options — gloss black, techno black, techno gold and titanium — let you match the wheels to your RSV4's livery or give it a fresh identity.\u003c\/li\u003e\n\u003cli\u003eComplete bolt-on set: front and rear wheels arrive ready to fit in place of the original Aprilia wheels, making this a straightforward upgrade.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting production standards, ensuring long-term durability and finish quality that stands up to years of road and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Performance\u003c\/h2\u003e\u003cp\u003eOZ has produced racing wheels for MotoGP, World Superbike and countless club-level competitors for decades, and the Gass RS-A distils that knowledge into a street-legal package. Each wheel is forged — not cast — from high-grade aluminium, a process that produces a denser, more homogeneous grain structure. The result is a wheel that is lighter and stronger simultaneously, resisting the deformation under hard braking or kerb strikes that heavier cast alternatives are more susceptible to.\u003c\/p\u003e\u003cp\u003eThe anodised finish is not merely cosmetic. Anodising hardens the aluminium surface, protecting against corrosion, road salt and minor abrasion — important for a wheel that will see year-round road use as well as the occasional track outing.\u003c\/p\u003e\u003ch2\u003eRoad and Track Usability\u003c\/h2\u003e\u003cp\u003eWhere many forged aftermarket wheels demand a compromise — showing impractical fragility on public roads or poor clearances for standard tyres — the Gass RS-A is designed to remove that trade-off. Standard tyre sizes are accommodated, everyday ride quality is unaffected, and the direct-swap fitment means no specialist workshop is required beyond normal wheel-change procedures. Whether you are chasing lap times at your local circuit or simply want a sharper, lighter feel on your favourite road, this set delivers measurable gains without the drama of a full suspension overhaul.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 Factory (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009–2016)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: the original rear sprocket carrier is not compatible with these wheels. A new sprocket carrier is included in the set; a new rear sprocket will also be required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: H3065AP35 (front) + H6095AP60 (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Gass RS-A\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (gloss black \/ techno black \/ techno gold \/ titanium)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel, bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF, 2009–2016\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167409365258,"sku":"H3065AP35+H6095AP60_sg","price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167409398026,"sku":"H3065AP35+H6095AP60_tb","price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167409430794,"sku":"H3065AP35+H6095AP60_tg","price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Titanium Anodised","offer_id":53167409463562,"sku":"H3065AP35+H6095AP60_t","price":2776.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GassSetGlossy.png?v=1780797190"},{"product_id":"oz-gass-rs-a-aluminium-set-aprilia-rsv4-17-20","title":"OZ Gass RS-A Forged Aluminium Wheel Set – Aprilia RSV4 \/ 1100 Factory \/ RF \/ RR (2017–2020)","description":"\u003cp\u003eIf you want a meaningful upgrade that pays dividends on the daily commute as much as on a track day, the OZ Gass RS-A forged aluminium wheel set is the most practical performance modification you can make to your Aprilia RSV4 or RSV4 1100 Factory, RF, or RR. Lighter rotating mass sharpens steering, improves acceleration, and reduces unsprung weight — all without touching the engine — while the durable anodised finish means years of kerb-side good looks with minimal upkeep.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers a superior strength-to-weight ratio over cast alternatives, cutting rotating mass for tangible gains in steering response and roll-on acceleration.\u003c\/li\u003e\n\u003cli\u003eEngineered for road and track use, giving everyday riders a wheel that handles urban riding and occasional circuit sessions with equal composure.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel, supplied with quality bearings, aluminium angled valves, and spacers where required — everything needed for a direct swap.\u003c\/li\u003e\n\u003cli\u003eA sprocket carrier is included in the set; note that the original Aprilia rear sprocket is not compatible and a new sprocket must be fitted.\u003c\/li\u003e\n\u003cli\u003eAvailable in four anodised colour options — gloss black, Techno Black, Techno Gold, and Titanium — so the wheels complement your RSV4's livery rather than clashing with it.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ Racing's exacting manufacturing standards, ensuring consistent quality and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on the Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to improve a motorcycle's real-world feel. Because the wheels spin continuously, every gram saved at the rim has a disproportionate effect compared with saving the same gram from static bodywork. On the RSV4 platform — already a razor-sharp machine — the Gass RS-A set amplifies that character further: turn-in becomes more instinctive, mid-corner adjustments feel more natural, and exits are cleaner as the engine's torque meets less inertia to overcome. On a busy road, those qualities translate into confidence; on circuit, they translate into lap time.\u003c\/p\u003e\u003ch3\u003eAnodised Finish and Long-Term Value\u003c\/h3\u003e\u003cp\u003eThe four colour options are all anodised rather than painted, meaning the finish is integral to the aluminium surface rather than sitting on top of it. Anodising resists chipping, brake-dust staining, and the general grime of daily use far better than a standard painted rim. Whichever colour suits your bike, you are investing in a finish that will still look presentable after high mileage — an important consideration if these wheels will spend more time on the road than in a paddock display.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a direct replacement for the original rims on the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 R — model years 2017 to 2020\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF — model years 2017 to 2020\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — model years 2017 to 2020\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory — model years 2017 to 2020\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eNo modifications to the frame or swingarm are required. The set ships with all necessary bearings, angled aluminium valves, and spacers. A new rear sprocket compatible with the included sprocket carrier must be sourced separately, as the original Aprilia sprocket will not fit the OZ carrier.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: H3065AP35 (front) + H6095AP60 (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (gloss black \/ Techno Black \/ Techno Gold \/ Titanium)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 R, RF, RR, 1100 Factory (2017–2020)\u003c\/li\u003e\n\u003cli\u003eSet contents: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167409529098,"sku":"H3065AP35+H6095AP60_sg","price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167409561866,"sku":"H3065AP35+H6095AP60_tb","price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167409594634,"sku":"H3065AP35+H6095AP60_tg","price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Titanium Anodised","offer_id":53167409627402,"sku":"H3065AP35+H6095AP60_t","price":2776.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GassSetGlossy_d52c417f-7999-4e15-a90a-8516726407b1.png?v=1780797192"},{"product_id":"oz-gass-rs-a-aluminium-set-aprilia-rsv4-21","title":"OZ Gass RS-A Forged Aluminium Wheel Set – Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026)","description":"\u003cp\u003eBuilt for riders who demand the same hardware as factory race teams, the OZ Gass RS-A forged aluminium wheel set transforms the Aprilia RSV4, RSV4 RR and RSV4 1100 Factory into a sharper, faster, more responsive machine. Reduced rotating mass sharpens turn-in, tightens acceleration and raises the ceiling of what your RSV4 can do on track — without any compromise for road use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers an exceptional strength-to-weight ratio, cutting rotating mass for faster acceleration and more direct steering response at every corner entry.\u003c\/li\u003e\n\u003cli\u003eEngineered for track and road in equal measure — these wheels handle the demands of a race day lap session just as confidently as a Sunday morning blast.\u003c\/li\u003e\n\u003cli\u003eReduced unsprung and rotating mass improves suspension compliance, giving the chassis electronics a cleaner platform to work from and increasing high-speed stability.\u003c\/li\u003e\n\u003cli\u003eAvailable in four anodised finishes — gloss black, techno black, techno gold and titanium — so your RSV4 stands apart in the pit lane or on the road.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set, supplied with quality bearings, aluminium angled valves and spacers (fitted only where required), plus a sprocket carrier — note that the original rear sprocket is not compatible with the new carrier.\u003c\/li\u003e\n\u003cli\u003eMade in Italy, the home of OZ Racing's half-century of motorsport heritage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eForged to Race\u003c\/h2\u003e\u003cp\u003eOZ has supplied wheels to MotoGP, World Superbike and Formula 1 constructors for decades. The Gass RS-A brings that depth of competition knowledge into a wheel set you can fit at home and ride the same afternoon. Each wheel starts as a solid aluminium billet and is forged under extreme pressure into a near-net shape, aligning the grain structure of the metal for maximum strength without excess material. The result is a wheel that is noticeably lighter than a cast OEM equivalent, with none of the fragility associated with cheaper aftermarket options.\u003c\/p\u003e\u003ch2\u003eWhat Reduced Rotating Mass Means on the RSV4\u003c\/h2\u003e\u003cp\u003eThe Aprilia RSV4 platform is already one of the most dynamically capable production superbikes ever built. Fitting the Gass RS-A set removes rotating inertia at both axles simultaneously. The engine spins up more freely under hard acceleration out of slow chicanes, the front end reacts to handlebar inputs with greater immediacy under braking, and mid-corner corrections require less physical effort. On a track with a mix of tight hairpins and fast sweepers — exactly the kind of circuit the RSV4 RR and 1100 Factory were designed to dominate — the cumulative effect is measurable in lap times and unmistakable in feel.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a direct replacement for the original wheels on the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eEach set includes a sprocket carrier. The original Aprilia rear sprocket is not compatible with the new carrier — a replacement rear sprocket will be required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: H3065AP35 (front) + H6095AP60 (rear)\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish options: gloss black anodised, techno black anodised, techno gold anodised, titanium anodised\u003c\/li\u003e\n\u003cli\u003eScope of delivery: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 R \/ RSV4 RF \/ RSV4 1100 \/ RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167409725706,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167409758474,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167409791242,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Titanium Anodised","offer_id":53167409824010,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GassSetGlossy_a6c67fd1-633b-4ff4-bd1f-80ce3c88492f.png?v=1780797194"},{"product_id":"oz-piega-r-aluminium-felgen-set-aprilia-rs-660","title":"OZ Piega R Forged Aluminium Wheel Set – Aprilia RS 660 (2020-2026)","description":"\u003cp\u003eThe OZ Piega R wheel set brings genuinely race-bred engineering to your Aprilia RS 660 without asking you to compromise on everyday usability. Forged from high-grade aluminium and finished in a durable anodised coating, these wheels reduce unsprung and rotational mass meaningfully enough to sharpen throttle response and steering precision on both road and track — all while offering a direct, bolt-on replacement for the standard RS 660 wheels.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers an outstanding strength-to-weight ratio, cutting rotational mass for sharper acceleration and more responsive handling.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 5.50 x 17 rear wheel, ready to replace the OEM wheels without modification.\u003c\/li\u003e\n\u003cli\u003eEvery set ships with quality bearings, aluminium angle valves and spacers where required — everything needed for a clean, straightforward fitment.\u003c\/li\u003e\n\u003cli\u003eIncludes a sprocket carrier as standard; note that the original sprocket is not compatible and will need to be replaced.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — Techno Black and Techno Gold — for a look that suits daily riders and track day enthusiasts alike.\u003c\/li\u003e\n\u003cli\u003eMade in Italy by OZ Racing, a marque with decades of motorsport pedigree at the highest levels of road racing and MotoGP.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Aprilia RS 660 — and Real-World Riding\u003c\/h2\u003e\u003cp\u003eThe Piega R is the lightest variant in OZ's proven Piega series, originally conceived for outright circuit performance. On the RS 660, that translates directly into a more eager, communicative ride whether you are threading through weekend mountain roads or pushing hard on a track day. Reduced gyroscopic effect means the bike changes direction with noticeably less effort, while the forged structure maintains the rigidity needed to keep tyre contact patches consistent under braking and corner load.\u003c\/p\u003e\u003cp\u003eUnlike some race-only wheel upgrades, the Piega R is fully road legal and requires no chassis modifications, making it a practical long-term investment rather than a single-discipline luxury. The anodised finish is resistant to the light scratching and brake-dust contamination that comes with regular riding, keeping the wheels looking presentable with minimal maintenance.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Aprilia RS 660, covering all model years from 2020 to 2026. The wheels replace the original equipment directly. A sprocket carrier is included in the set; please note that the standard OEM sprocket is not compatible and must be replaced when fitting these wheels.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: R30663507 + R60966007\u003c\/li\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (Techno Black or Techno Gold)\u003c\/li\u003e\n\u003cli\u003eIncludes: bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167409856778,"sku":null,"price":2716.29,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167409889546,"sku":null,"price":2716.29,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_355bda23-85dc-48a4-95c4-506d9273f3bc.png?v=1780797194"},{"product_id":"oz-gass-rs-a-aluminium-felgen-set-bmw-k46","title":"OZ Gass RS-A Forged Aluminium Wheel Set – BMW S1000RR K46 (2009-2018)","description":"\u003cp\u003eBorn on the WorldSBK grid and engineered to deliver that same race-winning edge on road and track, the OZ Gass RS-A forged aluminium wheel set transforms the handling dynamics of the BMW S1000RR K46. By dramatically reducing unsprung and rotating mass compared to the factory cast wheels, these Italian-forged hoops sharpen turn-in, improve mid-corner stability and liberate measurable gains in acceleration and braking response.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass for faster steering response, improved stability and stronger acceleration out of every corner.\u003c\/li\u003e\n\u003cli\u003eAvailable in four anodised finishes — gloss black, techno black, techno gold and titanium — each with a durable, corrosion-resistant surface that holds its look season after season.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel, pre-fitted with high-quality bearings, aluminium angled valves and spacers where required.\u003c\/li\u003e\n\u003cli\u003eRear wheel supplied with a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for the OEM cast wheels on the BMW S1000RR K46 (2009-2018); no modifications required for fitment.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ Racing's exacting WorldSBK-derived standards for maximum performance and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Performance\u003c\/h2\u003e\u003cp\u003eReducing rotating mass at the wheels is one of the highest-value upgrades available to a track-day rider or club racer. Every kilogram saved at the rim requires less energy to accelerate and decelerate, which translates directly into quicker lap times and a more responsive throttle feel. The Gass RS-A was developed with this principle at its core, making it equally at home on a fast circuit as it is on a demanding alpine road.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eOZ Racing's forging process aligns the grain structure of the aluminium for superior strength-to-weight ratio compared to cast alternatives. The anodised finish is integral to the metal surface rather than a coating applied on top, meaning it resists chipping, fading and the chemical attack of tyre sealants, brake dust and road grime. Every wheel leaves the Italian facility having passed OZ's in-house quality checks, ensuring the dimensional accuracy critical for high-speed balance.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K46 produced between 2009 and 2018 fitted with the original cast (Gussfelge) wheels. It is a like-for-like dimensional replacement for the OEM wheels. A sprocket carrier is included in the set; however, the original rear sprocket will not fit the new carrier and must be sourced separately. Fitment to models outside the specified year range or with non-standard wheel configurations is not supported.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: H3063BM35 (front) + H6094BM60 (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (gloss black \/ techno black \/ techno gold \/ titanium)\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 (2009-2018) with OEM cast wheels\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167410184458,"sku":"H3063BM35+H6094BM60_sg","price":2969.27,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167410217226,"sku":"H3063BM35+H6094BM60_tb","price":2969.27,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167410249994,"sku":"H3063BM35+H6094BM60_tg","price":2969.27,"currency_code":"EUR","in_stock":true},{"title":"Titanium Anodised","offer_id":53167410282762,"sku":"H3063BM35+H6094BM60_t","price":2969.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GassSetGlossy_3870d82d-6b56-492c-831f-de43db0fecd9.png?v=1780797202"},{"product_id":"oz-gass-rs-a-aluminium-set-aprilia-rs-660","title":"OZ Gass RS-A Aluminium Wheel Set Aprilia RS 660 (2020-2026)","description":"\u003cp\u003eEngineered in Italy and forged from lightweight aluminium, the OZ Gass RS-A wheel set transforms the handling and acceleration of the Aprilia RS 660 across every environment — from the morning commute to a full track day. By significantly reducing rotating mass, these wheels sharpen the RS 660's responses in a way that no tyre or suspension upgrade can replicate.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged lightweight aluminium construction delivers an outstanding strength-to-weight ratio, reducing rotating mass for noticeably quicker acceleration and more agile direction changes.\u003c\/li\u003e\n\u003cli\u003eDesigned equally for road and track use, offering a performance balance that suits everyday riding as well as circuit sessions without compromise.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel, supplied with quality bearings, aluminium angled valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eA sprocket carrier is included in the set — note that the original Aprilia rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eAvailable in four anodised finishes — gloss black, techno black, techno gold, and titanium — each providing a durable, corrosion-resistant surface that retains its appearance under hard use.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for the Aprilia RS 660 (2020-2026), making installation straightforward without modification.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: manufactured to OZ Racing's exacting quality standards, ensuring long-term durability and consistent dimensional accuracy.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eForged Aluminium — Why It Matters\u003c\/h2\u003e\u003cp\u003eThe Gass RS-A name reflects OZ's commitment to forged wheel technology. The forging process aligns the grain structure of the aluminium, producing a wheel that is substantially stronger than a cast equivalent at a lower overall weight. For the Aprilia RS 660 — a machine that already rewards precise inputs — the reduction in unsprung and rotating mass sharpens steering feel and reduces the effort required to change direction at speed.\u003c\/p\u003e\u003ch2\u003eRoad and Track Versatility\u003c\/h2\u003e\u003cp\u003eUnlike dedicated race-only wheels, the Gass RS-A set is homologated for road use, meaning you can run these wheels on your daily licence plates and switch to track tyres for a circuit day without swapping back to stock. The anodised finish on each colour option resists the brake dust, chain lubricant, and weather exposure that road use demands, while the structural integrity holds up to the lateral forces generated during hard cornering on track.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the standard wheels on the Aprilia RS 660, covering model years 2020 through 2026. The sprocket carrier supplied in the kit is required because the original Aprilia rear sprocket is not compatible with the Gass RS-A hub. All other fitment hardware — bearings, angled aluminium valves, and spacers where applicable — is included.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart Number: H3065AP35 + H6095AP60\u003c\/li\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Gass RS-A\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RS 660 (2020-2026)\u003c\/li\u003e\n\u003cli\u003eFinish options: Gloss black anodised, techno black anodised, techno gold anodised, titanium anodised\u003c\/li\u003e\n\u003cli\u003eIntended use: Road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167410315530,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Black Anodised","offer_id":53167410348298,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167410381066,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true},{"title":"Titanium Anodised","offer_id":53167410413834,"sku":null,"price":2776.32,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/GassSetGlossy_dea3a176-52e1-4dae-8fd4-d7b511535efc.png?v=1780797203"}],"url":"https:\/\/inter-pace.com\/ja-jp\/collections\/wheels-aluminium.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}