I2M ABS Eliminator for Yamaha YZF-R3 (2019-2026) – Plug-and-Play ABS Delete

Building a clean, focused track weapon from your Yamaha YZF-R3 means stripping away every gram and system that adds complexity without adding lap time. The I2M ABS Eliminator lets you remove the OEM ABS control unit from your YZF-R3 (2019–2026) without triggering fault codes or upsetting the bike's remaining electronics — a professionally engineered solution, not a workaround.

Key Features

• Fits Yamaha YZF-R3 model years 2019–2026 with no modifications required
• Plug-and-play installation — no cutting, soldering or alterations to the original wiring harness
• Prevents ECU fault codes and electronic warnings after ABS unit removal
• Replicates the necessary wheel speed sensor signals so all other OEM systems continue to function correctly
• Compact, lightweight construction that supports a weight-optimised track build
• Designed and approved for closed-circuit, track-only use

A Clean Delete, Not a Compromise

The YZF-R3 has earned its place as one of the most rewarding bikes in club racing and junior championship paddocks. Its precise handling and predictable power delivery make it ideal for learning the limits, and serious track builders want every component choice to reflect that intent. Removing the ABS unit the right way matters — a botched delete on a modern motorcycle can leave persistent warning lights active, interfere with the speedometer or cause erratic behaviour in other electronic systems.

The I2M ABS Eliminator is engineered to close the loop properly. Once the OEM ABS module is removed and the I2M unit is connected, the ECU receives the signals it expects from the wheel speed sensors. The result is a bike that runs cleanly, without any fault codes, exactly as it should on a closed circuit.

Plug-and-Play Installation

One of the most important qualities of any serious track preparation part is how cleanly it integrates. The I2M ABS Eliminator connects directly to the existing connectors in the YZF-R3 wiring harness. There is no need to cut a single wire, apply heat-shrink to a soldered joint, or modify any loom routing. The ABS unit comes out, the I2M emulator goes in, and the connection is made using the original plugs. Installation is straightforward and fully reversible, preserving the integrity of the original harness for future use if required.

Sensor Signal Emulation

A quality ABS eliminator must do more than simply prevent a warning light. The I2M unit actively replicates the relevant sensor signals that the ABS module would otherwise provide, ensuring that dependent OEM systems — including those that draw on wheel speed data — continue to operate as intended. On the YZF-R3, where a clean electronics package directly supports consistent, confidence-inspiring track behaviour, this level of integration makes a genuine difference to how the bike feels and responds.

Who This Is For

The I2M ABS Eliminator is the right choice if you are:

• Preparing your Yamaha YZF-R3 specifically for closed-circuit competition or track days
• Looking for a professional-grade ABS delete solution with no improvised wiring
• Committed to a plug-and-play approach that leaves the original harness completely intact
• Wanting the remaining electronics to function correctly after the ABS unit is removed
• Optimising your build for weight reduction and functional simplicity on track

Fitment & Compatibility

This product fits the following motorcycle:

• Yamaha YZF-R3 (2019–2026)

Important Notice

This product is designed exclusively for closed-circuit, track use only. It is not approved for use on public roads.

Specifications