{"product_id":"oz-piega-r-aluminium-rear-wheel-yamaha-yzf-r1-m-rn32-rn49-rn65","title":"OZ Piega R Aluminium Rear Wheel Yamaha YZF-R1\/M RN32, RN49 \u0026 RN65 (2015-2026) R62106007","description":"\u003cp\u003eThe OZ Piega R is the track-focused evolution of the acclaimed Piega family — a forged aluminium rear wheel engineered by OZ's SBK Racing division to deliver measurably lower rotational mass, sharper turn-in and faster directional changes on circuit. Developed exclusively for the Yamaha YZF-R1 and YZF-R1M across model codes RN32, RN49 and RN65 (2015–2026), every gram saved here translates directly into lap-time gain.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLighter than the standard Piega: the R variant strips further mass from an already class-leading design, reducing rotational inertia for quicker acceleration and deceleration responses.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction: a premium aerospace-grade alloy is press-forged under high load, producing a wheel that is simultaneously lighter and stiffer than a cast equivalent.\u003c\/li\u003e\n\u003cli\u003eFive-spoke Piega R design developed in-house by the OZ SBK Racing department — geometry tuned for track loads and tyre carcass support at sustained high speed.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — techno black and techno gold — both applied to the same structural specification for a race-ready appearance without added weight.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: every Piega R leaves OZ's Italian facility, where motorsport manufacturing standards govern every machining and finishing step.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium bearings, aluminium angle valves, spacers (fitted where required) and a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineered for the Track\u003c\/h2\u003e\u003cp\u003eOZ's racing pedigree runs deep, and the Piega R is the direct beneficiary. Where the standard Piega wheel already outperforms OEM in terms of unsprung and rotational mass, the R variant takes the concept further — removing every gram that does not contribute to structural integrity. The result is a wheel that lets the suspension work more precisely, reduces the gyroscopic effect during direction changes, and allows the rider to exploit the YZF-R1's chassis balance more completely.\u003c\/p\u003e\u003cp\u003eThe five-spoke layout is not a styling exercise. Each spoke is profiled to carry cornering, braking and drive loads efficiently, while the hub interface is machined to close tolerances for a precise fit to Yamaha's axle and brake carrier dimensions. The included sprocket carrier is designed specifically for this wheel; the original Yamaha rear sprocket will not seat correctly and must be substituted.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis rear wheel is designed and homologated exclusively for track use on the following Yamaha models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN32 (2015–2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN32 (2015–2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN49 (2017–2020)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN49 (2017–2020)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN65 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN65 (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThis wheel is optimised exclusively for circuit use and is not homologated for road or public highway use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: R62106007\u003c\/li\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003ePosition: rear wheel\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (techno black or techno gold)\u003c\/li\u003e\n\u003cli\u003eSpoke design: five-spoke\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ circuit only\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R1\/M RN32, RN49 \u0026amp; RN65 (2015–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167471296778,"sku":"R62106007_tb","price":1575.0,"currency_code":"USD","in_stock":true},{"title":"Techno Gold Anodised","offer_id":53167471329546,"sku":"R62106007_tg","price":1575.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRHintenMatt_d7068dd1-a2de-464b-a2fa-eaf5a38933d6.png?v=1780798487","url":"https:\/\/inter-pace.com\/en-ve\/products\/oz-piega-r-aluminium-rear-wheel-yamaha-yzf-r1-m-rn32-rn49-rn65","provider":"Inter-Pace","version":"1.0","type":"link"}