{"title":"Off-Road Protectors","description":null,"products":[{"product_id":"leatt-body-protector-3df-airfit-lite-evo-black","title":"Leatt Body Protector 3DF AirFit Lite Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Body Protector 3DF AirFit Lite Evo brings Level 2 chest and back protection into a garment that wears like a long-sleeved compression shirt. Instead of rigid plates, Leatt uses 3DF AirFit impact foam across chest, back, shoulders and elbows, a material that stays supple while you move and is designed to cope with more than one impact.\u003c\/p\u003e\u003cp\u003eThat combination makes the Lite Evo a strong pick for enduro and trail riders who spend whole days on the bike and want armour they forget they are wearing. An expanded chest panel, padded flanks and the slimmer BraceOn™ fitting for Leatt neck braces complete the package, and Leatt rates the set-up at 18 points on its own protection score.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChest certified to EN 1621-3 Level 2, back to EN 1621-2 Level 2\u003c\/li\u003e\n\u003cli\u003eShoulder and elbow pads certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eSoft 3DF AirFit foam, built by Leatt to absorb multiple impacts\u003c\/li\u003e\n\u003cli\u003eExpanded chest panel and a full-length back protector\u003c\/li\u003e\n\u003cli\u003ePadded flanks for additional coverage along the ribs\u003c\/li\u003e\n\u003cli\u003eNew, slimmer BraceOn™ fitting system for Leatt neck braces\u003c\/li\u003e\n\u003cli\u003eAnti-odour MoistureCool and AirMesh wicking fabrics\u003c\/li\u003e\n\u003cli\u003eFive single sizes, S to XXL, for riders from 160 to 196 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and Certification\u003c\/h2\u003e\u003cp\u003eEach protection zone of the Lite Evo has been CE-tested and certified as impact protection. The chest pad meets EN 1621-3 at Level 2 and the full-length back pad meets EN 1621-2 at Level 2, the higher of the two performance levels in both standards. The shoulder and elbow pads are certified to EN 1621-1 at Level 1.\u003c\/p\u003e\u003cp\u003eThe French Motorcycle Federation (FFM) has also approved the protector. The figure of 18 points is a Leatt protection score, an in-house rating the manufacturer uses to place its body protectors against each other; it is not part of the CE standard.\u003c\/p\u003e\u003ch2\u003eFit and Sizing\u003c\/h2\u003e\u003cp\u003eLeatt cuts the Lite Evo in single sizes, S, M, L, XL and XXL, rather than the combined S\/M or L\/XL steps of several other Leatt protectors. Across that run, the manufacturer quotes a body height of 160 to 196 cm.\u003c\/p\u003e\u003cp\u003eThe 3D shape and the compression fit keep every pad pressed onto the right spot, which is what lets foam armour work properly in a crash. Padded flanks follow the sides of the torso, so the protection does not end at the edge of the chest panel. Pick the size that fits snugly against the body; a loose compression garment lets pads shift.\u003c\/p\u003e\u003ch2\u003eMaterials and Climate\u003c\/h2\u003e\u003cp\u003eThe base garment is made from MoistureCool and AirMesh fabrics. Both wick moisture away from the skin and carry an anti-odour treatment, which pays off on multi-day enduro trips when there is no time to wash between rides.\u003c\/p\u003e\u003cp\u003eLeatt describes the Lite Evo as lightweight, ventilated protection; the starting weight given by the manufacturer is 1.35 kg. The soft foam pads bend with the torso instead of standing proud of it, so the protector sits flat under a motocross jersey.\u003c\/p\u003e\u003ch2\u003eNeck Brace Compatibility\u003c\/h2\u003e\u003cp\u003eFor riders who use a Leatt neck brace, the Lite Evo carries the new, slimmer BraceOn™ fitting system. It is designed to give the brace a seamless fit on the protector, so you do not have to choose between neck brace and body armour.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eLeatt designed the protector to be easy to hand wash. Wash out sweat and dust after a ride and let the garment dry completely before you pack it away. It is delivered in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe Lite Evo relies on soft 3DF AirFit foam. If deflecting roost from the rider ahead is your first priority, look at Leatt models with a hard chest plate, such as the 3DF AirFit Hybrid or the 4.5 and 5.5 Evo. Remember too that Level 2 covers chest and back only; shoulders and elbows are certified at Level 1.\u003c\/p\u003e\u003cp\u003eBecause the sizes are single letters, there is less overlap between steps than with a combined S\/M size. Check your chest measurement against the size chart before ordering, and choose the tighter fit if you are in doubt, since compression armour only protects well when it stays in place.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eLeatt lists this version as Black. On the product photos the mesh reads as a deep charcoal, with the AirFit Lite lettering and a small red accent on the chest. Under a jersey it simply disappears, and the dark fabric does not show trail dust or sweat marks the way a light colour would.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back, shoulders, elbows, padded flanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact material\u003c\/th\u003e\n\u003ctd\u003e3DF AirFit foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFabrics\u003c\/th\u003e\n\u003ctd\u003eMoistureCool, AirMesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS, M, L, XL, XXL (160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.35 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033439097098,"sku":"5024060600","price":290.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033439129866,"sku":"5024060601","price":290.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033439162634,"sku":"5024060602","price":290.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033439195402,"sku":"5024060603","price":290.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033439228170,"sku":"5024060604","price":290.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-3df-airfit-lite-evo-black__1.png?v=1793444573"},{"product_id":"leatt-kidney-belt-2-5-flexmesh-black","title":"Leatt Kidney Belt 2.5 FlexMesh – Unisex – Black","description":"\u003cp\u003eThe Leatt Kidney Belt 2.5 FlexMesh is the light option in Leatt's kidney belt range. Instead of a thick foam panel it relies on FlexMesh, an ultra-lightweight and breathable material that gives the lower back support on rough terrain while staying cool enough to wear from the first practice lap to the last trail of the day.\u003c\/p\u003e\n\u003cp\u003eIf you mainly want your midsection held together over whoops and braking bumps, and less weight and heat on your back is more important to you than an impact pad, this is the belt Leatt designed for that job.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLightweight, breathable FlexMesh construction\u003c\/li\u003e\n\u003cli\u003eSupports the lower back on rough terrain\u003c\/li\u003e\n\u003cli\u003eComfortable enough for all-day wear according to Leatt\u003c\/li\u003e\n\u003cli\u003eVentilated design\u003c\/li\u003e\n\u003cli\u003eMarked by Leatt as CE impact tested\u003c\/li\u003e\n\u003cli\u003eThree sizes: S\/M, L\/XL, XXL\/3XL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eMaterial \u0026amp; ventilation\u003c\/h2\u003e\n\u003cp\u003eFlexMesh is the core of this belt. Leatt describes it as ultra-lightweight, protective and breathable, so warm air can escape rather than building up between jersey and back. That is the reason Leatt calls the 2.5 comfortable enough for all-day wear.\u003c\/p\u003e\n\u003ch2\u003eSupport\u003c\/h2\u003e\n\u003cp\u003eSupporting the lower back is the main task of the 2.5 FlexMesh. Leatt built it for the support riders need on rough terrain, and with its light construction it is meant to be worn the whole day rather than only for the roughest sections.\u003c\/p\u003e\n\u003ch2\u003eProtection\u003c\/h2\u003e\n\u003cp\u003eLeatt marks the 2.5 FlexMesh as CE impact tested. The product data available to us does not name a standard or level for this belt, so we do not state one. If you want a kidney belt with a lumbar impact protector certified to EN 1621-2, look at the Kidney Belt 3DF 3.5.\u003c\/p\u003e\n\u003ch2\u003eSizes\u003c\/h2\u003e\n\u003cp\u003eThe belt is available in S\/M, L\/XL and XXL\/3XL. Leatt provides a manual for its kidney belts as a download; for help with the size, contact us before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhat you should know\u003c\/h2\u003e\n\u003cp\u003eThe 2.5 FlexMesh is a support belt with a focus on low weight and ventilation. The sources we have list no EN standard or protection level for it, so it is not a replacement for a back protector. For certified lumbar protection the 3DF 3.5 is the better choice.\u003c\/p\u003e\n\u003ch2\u003eColour\u003c\/h2\u003e\n\u003cp\u003eBlack suits a belt that lives under the jersey: it hardly shows through, and the dirt that every off-road day brings with it stays inconspicuous.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eKidney belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eFlexMesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFunction\u003c\/td\u003e\n\u003ctd\u003eLower-back support\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eCE impact tested (manufacturer label)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVentilation\u003c\/td\u003e\n\u003ctd\u003eVentilated, breathable FlexMesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\/3XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eMotocross, enduro, trail\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033440145674,"sku":"5027011000","price":49.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033440178442,"sku":"5027011001","price":49.95,"currency_code":"EUR","in_stock":true},{"title":"XXL\/3XL \/ Black","offer_id":54033440211210,"sku":"5027011002","price":49.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-kidney-belt-2-5-flexmesh-black__1.png?v=1793444587"},{"product_id":"leatt-knee-guard-dual-axis-jr-kids-black","title":"Leatt Knee Guard Dual Axis Jr – Kids – Black","description":"\u003cp\u003eThe Leatt Dual Axis Jr is Leatt's top-level knee and shin guard for young riders. It brings the hinge concept of the adult Dual Axis to a junior size: dual pivots on each side copy the natural motion of the knee, so the guard stays comfortable on and off the bike.\u003c\/p\u003e\u003cp\u003eImpact-absorbing foam sits under a hard-shell chassis that covers both knee and shin, and the knee is CE certified to EN 1621-1. For a child riding motocross or enduro, that means the area that most often hits handlebars, pegs and ground is covered in one piece.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKnee and shin protection designed specifically for young riders\u003c\/li\u003e\n\u003cli\u003eCE certified, knee to EN 1621-1\u003c\/li\u003e\n\u003cli\u003eHard-shell chassis over impact-absorbing foam\u003c\/li\u003e\n\u003cli\u003eDual-pivot hinge follows natural knee movement\u003c\/li\u003e\n\u003cli\u003eSlim shin plate fits inside most MX and enduro boots\u003c\/li\u003e\n\u003cli\u003eLarge ventilation ports to keep young riders cool\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 25 points, 500 g per pair (manufacturer data)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection\u003c\/h2\u003e\u003cp\u003eThe Dual Axis Jr combines a hard-shell chassis with impact-absorbing foam underneath and integrates knee and shin coverage into one guard. Leatt lists the knee as CE tested and certified as impact protection to EN 1621-1; the product page does not name a level for the junior model, so we do not state one.\u003c\/p\u003e\u003cp\u003eLeatt rates the guard at 25 points on its own protection scale, a manufacturer figure.\u003c\/p\u003e\u003ch2\u003eMovement and comfort\u003c\/h2\u003e\u003cp\u003eTwo pivots on each side of the knee follow its natural motion, which Leatt says gives greater comfort both on the bike and when walking around the pits. A comfortable strapping system secures the guard for a good fit on smaller legs.\u003c\/p\u003e\u003ch2\u003eBoots and ventilation\u003c\/h2\u003e\u003cp\u003eThe slim shin plate is shaped to fit inside most motocross and enduro boots. Vented plates and large ventilation ports help keep young riders cool, which makes a hard-shell guard easier to accept on hot days.\u003c\/p\u003e\u003ch2\u003eSize and weight\u003c\/h2\u003e\u003cp\u003eThe guard comes in a single Junior size. Leatt does not publish a height range for it, so check the fit on your child's leg: the knee cup should sit centred on the kneecap and the shin plate should reach into the boot. Leatt gives the weight as 500 g per pair. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is a protector with a hard shell, not a knee brace; the pivots follow the knee but offer no ligament support. Leatt names EN 1621-1 for the knee but no performance level for the junior version. There is only one Junior size, so growing riders will move on to the adult sizes at some point.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack matches any kids' kit and keeps the hard plates looking tidy even after muddy practice days. Under dark or bright youth pants, the guard stays understated.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKids' hard-shell knee and shin guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e25 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHard-shell chassis over impact-absorbing foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHinge\u003c\/td\u003e\n\u003ctd\u003eDual pivots on each side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e500 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eJunior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"Junior \/ Black","offer_id":54033441161482,"sku":"5023051050","price":79.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-guard-dual-axis-jr-kids-black__1.png?v=1793444602"},{"product_id":"leatt-chest-protector-5-5-pro-evo-black","title":"Leatt Chest Protector 5.5 Pro Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Chest Protector 5.5 Pro Evo in Black is the top hard-shell option in this range for riders who want certified cover across the chest, back and shoulders in one piece. Leatt combines a hard shell with FlexMesh Pro armour, then adds adjustable flank panels and an extended back plate, so the coverage reaches well beyond a classic roost guard.\u003c\/p\u003e\u003cp\u003eIn black, the 5.5 Pro Evo keeps a low-key look on the bike and under a jersey, while the protection underneath is rated CE Level 2 at chest and back. It is built for motocross, enduro and trail riders who spend long days on the bike and want the strongest certification Leatt offers in a hard-shell chest protector with shoulder guards.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2, shoulders EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eHard shell combined with ventilated FlexMesh Pro armour\u003c\/li\u003e\n\u003cli\u003eAdjustable flank panels and extended back plate for rib, side and spine coverage\u003c\/li\u003e\n\u003cli\u003eLeatt states 30% less weight and 50% more ventilation than the previous model\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear plates plus slimmer BraceOn neck brace system\u003c\/li\u003e\n\u003cli\u003eAdjustable over-the-shoulder straps, weight 1.80 kg\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 19 points, FFM certified and ISR rated according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection \u0026amp; Certification\u003c\/h2\u003e\u003cp\u003eEach zone of this black 5.5 Pro Evo carries its own CE standard: the chest plate is tested to EN 1621-3 at Level 2, the back to EN 1621-2 at Level 2, and the shoulder guards to EN 1621-1 at Level 1. Leatt declares the protector as personal protective equipment under Regulation (EU) 2016\/425.\u003c\/p\u003e\u003cp\u003eOn top of the CE results, Leatt lists the 5.5 Pro Evo as certified by the French Motorcycle Federation (FFM) and as ISR rated, and gives it a total protection score of 19 points on its own radar-chart scale. Those three items are manufacturer information and describe Leatt's internal rating rather than a separate standard.\u003c\/p\u003e\u003ch2\u003eConstruction \u0026amp; Coverage\u003c\/h2\u003e\u003cp\u003eThe shell sits over FlexMesh Pro armour that works with flex joints and several articulated plates, so the protector bends with the torso in three dimensions instead of acting as one rigid board. Adjustable hard-shell flank panels wrap towards the ribs and sides, and the back plate is extended to reach further down the spine.\u003c\/p\u003e\u003cp\u003eLeatt specifies the material mix as 38% polyethylene, 31% ethylene-vinyl acetate, 28% polyurethane and 3% other components. The front and rear plates can be removed, which lets you adapt the set-up to your neck brace or to the riding you have planned.\u003c\/p\u003e\u003ch2\u003eVentilation \u0026amp; Weight\u003c\/h2\u003e\u003cp\u003eFlexMesh Pro is a perforated, mesh-type structure, and Leatt describes it as keeping the rider cool without giving up protection. According to the manufacturer, the Evo generation is 30% lighter and 50% better ventilated than the model it replaces. The black protector weighs 1.80 kg, a figure worth knowing if you are moving up from a light roost guard.\u003c\/p\u003e\u003ch2\u003eNeck Brace \u0026amp; Jersey Compatibility\u003c\/h2\u003e\u003cp\u003eThe slimmer BraceOn system shapes the chest and back areas so a Leatt neck brace seats cleanly, and Leatt confirms the fit for wearing the brace over or under the shirt. With the plates removed, the 5.5 Pro Evo also adapts to riders who run their brace in a different position.\u003c\/p\u003e\u003ch2\u003eFit \u0026amp; Sizing\u003c\/h2\u003e\u003cp\u003eThree sizes cover riders from 160 to 196 cm: S\/M, L\/XL and XXL. The over-the-shoulder straps adjust, so the plates can be pulled into position on the chest before the flank panels are set. Choose by body height first, then fine-tune with the straps and side panels.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe shoulder guards are certified at Level 1, not Level 2, so the highest rating applies to chest and back only. With 1.80 kg this is a substantial hard-shell protector; riders who mainly want roost protection may find a lighter model more comfortable. The percentage claims on weight and airflow are Leatt's own comparison with the previous model.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack is the most discreet version of the 5.5 Pro Evo. It blends with almost any kit, shows mud and roost marks less than the white version, and still looks tidy under a vented jersey. In strong sun, a dark shell can feel warmer to the touch when you stop, so the mesh structure does a good part of the cooling work.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 5.5 Pro Evo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back, shoulders, ribs and sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2, shoulders EN 1621-1 Level 1; PPE Regulation (EU) 2016\/425\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with FlexMesh Pro, articulated multi-plate design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e38% polyethylene, 31% EVA, 28% polyurethane, 3% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.80 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL (rider height 160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e19 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033442373898,"sku":"5025202340","price":259.0,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033442406666,"sku":"5025202341","price":259.0,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033442439434,"sku":"5025202342","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-5-5-pro-evo-black__1.png?v=1793444618"},{"product_id":"leatt-chest-protector-5-5-pro-evo-white","title":"Leatt Chest Protector 5.5 Pro Evo – Unisex – White","description":"\u003cp\u003eWhite turns the Leatt 5.5 Pro Evo into a clean, bright statement over a race jersey, and behind that finish sits the most complete hard-shell layout Leatt builds for chest, back and shoulders. Level 2 certification front and rear, Level 1 shoulder guards and side panels that reach around the ribs make it a protector for riders who want coverage first.\u003c\/p\u003e\u003cp\u003eCompared with the model it succeeds, Leatt reports a 30% weight saving and 50% more airflow, which matters most on hot motocross days and long enduro loops. The white version pairs well with light-coloured kit and stays visible when you ride in a group.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE impact rating: chest Level 2 (EN 1621-3), back Level 2 (EN 1621-2), shoulders Level 1 (EN 1621-1)\u003c\/li\u003e\n\u003cli\u003eFlexMesh Pro armour under a hard shell, with flex joints for 3D movement\u003c\/li\u003e\n\u003cli\u003eHard-shell flank panels with adjustment for rib and side cover\u003c\/li\u003e\n\u003cli\u003eLonger back plate for extended spine coverage\u003c\/li\u003e\n\u003cli\u003eBraceOn system, slimmer than before, with removable front and rear plates\u003c\/li\u003e\n\u003cli\u003e1.80 kg; Leatt rates it at 19 protection points and lists FFM and ISR\u003c\/li\u003e\n\u003cli\u003ePacked in plastic-free packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt Around Coverage\u003c\/h2\u003e\u003cp\u003eThe white 5.5 Pro Evo protects more surface than a typical chest protector. Besides the chest pad, which Leatt has enlarged on this generation, the set includes shoulder guards, adjustable flank panels for ribs and sides and an extra back panel that lengthens the spine cover. The plates articulate against each other, so you can still tuck and stand on the pegs freely.\u003c\/p\u003e\u003cp\u003eThe shell itself is HDPE according to Leatt's technical data, and the full product breaks down into 38% polyethylene, 31% EVA, 28% polyurethane and 3% other materials.\u003c\/p\u003e\u003ch2\u003eCE Ratings in Detail\u003c\/h2\u003e\u003cp\u003eUnder EN 1621-3 the chest reaches Level 2, and under EN 1621-2 the back reaches Level 2 as well; the shoulder caps are tested to EN 1621-1 with Level 1. The protector is placed on the market as PPE under Regulation (EU) 2016\/425.\u003c\/p\u003e\u003cp\u003eLeatt adds three of its own references: FFM certification from the French Motorcycle Federation, an ISR rating and a protection score of 19 out of the brand's scale. Treat these as manufacturer information that helps compare Leatt models with each other.\u003c\/p\u003e\u003ch2\u003eAirflow\u003c\/h2\u003e\u003cp\u003eFlexMesh Pro replaces large closed surfaces with an open, mesh-like armour. Leatt quotes 50% more ventilation than the previous model, which keeps heat build-up down when the white shell sits in direct sun or when you are working hard in technical sections.\u003c\/p\u003e\u003ch2\u003eWearing It With a Neck Brace\u003c\/h2\u003e\u003cp\u003eThe slimmer BraceOn system is shaped for a Leatt neck brace, and Leatt confirms it for over-shirt and under-shirt use. Both the front and the rear plate come off, so you can match the protector to the brace you already own or ride without a brace.\u003c\/p\u003e\u003ch2\u003eSizes and Adjustment\u003c\/h2\u003e\u003cp\u003eThe 5.5 Pro Evo comes in S\/M, L\/XL and XXL for riders between 160 and 196 cm tall. Over-the-shoulder straps set the height of the chest plate, and the flank panels are adjustable for a close fit around the ribs. If you sit between two sizes, the strap range helps you fine-tune the fit.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eLevel 2 applies to chest and back; the shoulder guards stay at Level 1. At 1.80 kg this white protector is heavier than lighter roost guards and soft-shell models, which is the trade-off for the hard-shell side and back coverage. The weight and ventilation percentages are Leatt's comparison with its own previous model, not an independent test.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe white finish looks sharp with bright race kits and keeps the protector easy to spot. It does show mud, roost and scuffs faster than black, so plan on wiping it down after wet rides if you want it to stay bright. On the plus side, a light surface tends to absorb less heat in strong sunshine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 5.5 Pro Evo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back, shoulders, ribs and sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2, shoulders EN 1621-1 Level 1; PPE Regulation (EU) 2016\/425\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHDPE hard shell with FlexMesh Pro, articulated multi-plate design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e38% polyethylene, 31% EVA, 28% polyurethane, 3% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.80 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL (rider height 160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e19 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ White","offer_id":54033443324170,"sku":"5025202343","price":259.0,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ White","offer_id":54033443356938,"sku":"5025202344","price":259.0,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ White","offer_id":54033443389706,"sku":"5025202345","price":259.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-5-5-pro-evo-white__1.png?v=1793444628"},{"product_id":"leatt-chest-protector-2-5-hybrid-mini-kids-black","title":"Leatt Chest Protector 2.5 Hybrid Mini – Kids – Black","description":"\u003cp\u003eAs the Mini version of Leatt's 2.5 Hybrid, this chest protector is made for junior MTB riders and young riders on light motorcycles. A polymer hard-shell chest plate deflects roost and stones, while a soft back protector made from Leatt's own 3DF material carries CE Level 1 certification.\u003c\/p\u003e\u003cp\u003eAt just 420 g and in one size, this black kids' protector sits on a light FlexMesh base layer that is easy to put on and well ventilated.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePolymer hard-shell chest plate for roost and stone deflection\u003c\/li\u003e\n\u003cli\u003e3DF soft foam back protector, CE Level 1 certified\u003c\/li\u003e\n\u003cli\u003eLightweight, ventilated FlexMesh base layer\u003c\/li\u003e\n\u003cli\u003eBraceOn system for neck brace compatibility\u003c\/li\u003e\n\u003cli\u003eDesigned for junior riders\u003c\/li\u003e\n\u003cli\u003eWeight 420 g, one size\u003c\/li\u003e\n\u003cli\u003ePlastic-free packaging\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMade for the Youngest Riders\u003c\/h2\u003e\u003cp\u003eLeatt designed the 2.5 Hybrid Mini for junior mountain bikers and young riders on light motorcycles. It focuses on the essentials: stone and roost deflection at the chest and certified soft protection along the back, all in a package light enough for small riders.\u003c\/p\u003e\u003ch2\u003eChest and Back\u003c\/h2\u003e\u003cp\u003eAt the front, a polymer hard shell turns away roost and stones thrown up by the riders ahead. At the back, Leatt uses its own 3DF soft foam, certified to CE Level 1. The foam is flexible and comfortable, which helps young riders accept wearing the protector.\u003c\/p\u003e\u003ch2\u003eFlexMesh Base Layer\u003c\/h2\u003e\u003cp\u003eThe plates are mounted on a FlexMesh base layer that Leatt describes as very light, well ventilated and easy to wear. For children, an easy on and off makes a real difference before each ride.\u003c\/p\u003e\u003ch2\u003eNeck Brace Compatibility\u003c\/h2\u003e\u003cp\u003eLeatt's BraceOn system makes the Mini compatible with a neck brace, so the protector already fits into a complete protection set-up for a young rider.\u003c\/p\u003e\u003ch2\u003eSize and Weight\u003c\/h2\u003e\u003cp\u003eLeatt offers the 2.5 Hybrid Mini in one size, listed in our shop as S\/M. It weighs 420 g. Leatt does not publish a height range for this one-size model, so check the fit on your child before riding.\u003c\/p\u003e\u003ch2\u003eWhere It Fits\u003c\/h2\u003e\u003cp\u003eLeatt describes the 2.5 Hybrid Mini as a protector for junior MTB riders and light motocross use. That makes it a good match for children on small motorcycles or mountain bikes, where the main risks are stones from the rider in front and falls onto the back. Riders who move on to bigger bikes and faster tracks will find certified chest impact protection in Leatt's Jr models.\u003c\/p\u003e\u003cp\u003eIf your child already rides with a Leatt neck brace, the BraceOn shaping means you do not have to choose between brace and chest protector.\u003c\/p\u003e\u003ch2\u003ePaperwork and Packaging\u003c\/h2\u003e\u003cp\u003eLeatt publishes an EU declaration of conformity for the 2.5 Hybrid Mini as well as a statement on PFAS. The protector is shipped in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe chest plate is designed for roost and stone deflection; Leatt does not state an impact protection level for the chest on this model. Only the back carries CE Level 1. With one size only, the fit range is limited, and Leatt gives no body-height guidance.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe Mini comes in black, a practical colour for children's gear that hides trail dirt and goes with any MTB or motocross kit.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 2.5 Hybrid Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest (roost and stone deflection) and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eBack: CE Level 1 (3DF soft foam)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003ePolymer hard-shell chest plate, 3DF soft foam back, FlexMesh base layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e420 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eOne size (S\/M)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eUse\u003c\/th\u003e\n\u003ctd\u003eJunior MTB and light motorcycle riding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePackaging\u003c\/th\u003e\n\u003ctd\u003ePlastic-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033444077834,"sku":"5027011500","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-2-5-hybrid-mini-kids-black__1.png?v=1793444642"},{"product_id":"leatt-elbow-guard-flexmesh-lite-jr-kids-black","title":"Leatt Elbow Guard Flexmesh Lite Jr – Kids – Black","description":"\u003cp\u003eThe Leatt Elbow Guard FlexMesh Lite Jr is the quick option for young riders: no sleeve to pull on, just straps that close with Velcro. It is designed to be worn over the jersey, so a child can add elbow protection in seconds before heading onto the track.\u003c\/p\u003e\u003cp\u003eThe protective part is a FlexMesh construction with vented polymer impact caps. Because there is no sleeve around the arm, heat is far less of an issue than with sleeve-type guards.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStrap-only system with quick Velcro adjustment\u003c\/li\u003e\n\u003cli\u003eFlexMesh construction with vented polymer impact caps\u003c\/li\u003e\n\u003cli\u003eNo-sleeve design to reduce heat and improve hygiene\u003c\/li\u003e\n\u003cli\u003eWorn over the jersey for fast gearing up\u003c\/li\u003e\n\u003cli\u003eJunior-specific size\u003c\/li\u003e\n\u003cli\u003e200 g according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow it is worn\u003c\/h2\u003e\u003cp\u003eUnlike the sleeve guards in Leatt's range, the FlexMesh Lite Jr sits on top of the jersey. Two strap zones wrap around the arm and close with Velcro, so the fit can be changed easily, for example when a thicker jersey goes on in winter. That makes it a practical choice for kids who need help with tight sleeves.\u003c\/p\u003e\u003ch2\u003eProtection\u003c\/h2\u003e\u003cp\u003eThe impact zone is built from FlexMesh with vented polymer caps, which cover the elbow and give a firm surface. Leatt publishes an EU type-examination certificate and an EU declaration of conformity among this guard's documents, but the product page does not name a standard or a protection level, so we do not state one here.\u003c\/p\u003e\u003ch2\u003eVentilation and hygiene\u003c\/h2\u003e\u003cp\u003eWith no sleeve, air reaches the arm freely and there is no fabric tube to soak up sweat. Leatt names reduced heat and improved hygiene as the two reasons for this design. The polymer caps are vented as well. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe FlexMesh Lite Jr is a lightweight, straps-only guard. Leatt does not state a CE level for it on the product page, and it offers less coverage than a full sleeve guard because it is held only by straps. It comes in one Junior size; Leatt does not publish a height range for it.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack straps and caps stay discreet over almost any jersey design and do not clash with team colours. Mud and roost marks are less obvious on black, which helps with a guard that sits on the outside of the kit.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKids' strap-on elbow guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eFlexMesh with vented polymer impact caps\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eStrap-only, Velcro adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleeve\u003c\/td\u003e\n\u003ctd\u003eNone (no-sleeve design)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWorn\u003c\/td\u003e\n\u003ctd\u003eOver the jersey\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e200 g (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eJunior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"Junior \/ Black","offer_id":54033444929802,"sku":"5027011450","price":49.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-elbow-guard-flexmesh-lite-jr-kids-black__1.png?v=1793444658"},{"product_id":"leatt-knee-guard-3df-5-0-evo-black","title":"Leatt Knee Guard 3DF 5.0 Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Knee Guard 3DF 5.0 Evo is a soft knee protector for riders who want certified impact protection they barely notice under their pants. Instead of a hard cup, it relies on 3DF AirFit foam that stays pliable while you ride and is certified to EN 1621-1 Level 1 for the knee.\u003c\/p\u003e\u003cp\u003eLeatt itself calls it probably the most comfortable knee protection you can wear. Whether that holds for your legs is something to try on, but the ingredients are clear: a pre-curved shape, a perforated neoprene sleeve and a Deflexion outer layer that adds durability without bulk.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE certified to EN 1621-1 Level 1 for the knee area\u003c\/li\u003e\n\u003cli\u003e3DF AirFit impact foam stays flexible on the bike\u003c\/li\u003e\n\u003cli\u003eDeflexion abrasion-resistant outer layer over the knee\u003c\/li\u003e\n\u003cli\u003ePre-curved design that follows the bent riding position\u003c\/li\u003e\n\u003cli\u003eAll protective material and the neoprene sleeve perforated for airflow\u003c\/li\u003e\n\u003cli\u003eSilicone-printed, adjustable leg straps plus an anti-slip calf band\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 16 points (manufacturer rating)\u003c\/li\u003e\n\u003cli\u003eFive single sizes from S to XXL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eThe knee zone of the 3DF 5.0 Evo is tested and certified as impact protection to EN 1621-1, the standard for limb protectors, at Level 1. Level 1 is the base performance class of that norm; riders who want the higher class should look at a Level 2 guard such as the Leatt 6.0 Evo.\u003c\/p\u003e\u003cp\u003eLeatt adds its own protection score of 16 points. This is a manufacturer rating that combines several in-house criteria, not a figure from the CE test, so treat it as a way to compare Leatt models with each other.\u003c\/p\u003e\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\u003cp\u003eThe impact layer is 3DF AirFit foam, a soft compound that bends with the knee and needs no rigid shell. Over it sits a Deflexion outer material, which Leatt describes as ultra-durable and abrasion resistant; it is there to survive ground contact and the rub of knee-gripping.\u003c\/p\u003e\u003cp\u003eAcross the knee the chassis uses a 4-way stretch fabric, and this stretch area is part of the CE-certified construction. The whole guard is pre-curved, so it does not have to be forced into shape when you bend your leg.\u003c\/p\u003e\u003ch2\u003eVentilation\u003c\/h2\u003e\u003cp\u003eEvery piece of protective material is perforated, and so is the neoprene sleeve that holds it. The sleeve also wicks moisture, which matters on long enduro loops where a closed neoprene tube would soon feel like a sauna.\u003c\/p\u003e\u003ch2\u003eFit and sizing\u003c\/h2\u003e\u003cp\u003eLeatt uses single sizing here, meaning S, M, L, XL and XXL rather than combined sizes. Two silicone-printed leg straps can be adjusted to your thigh and calf, and an anti-slip band at the calf keeps the guard from creeping down during a moto.\u003c\/p\u003e\u003cp\u003eBecause the protector is soft and slim, it is aimed at riders who wear it under their pants all day, from motocross training to trail rides.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 3DF 5.0 Evo has no hard shell over the kneecap, so it does not offer the sliding behaviour of a hard-cap guard, and it is certified at Level 1, not Level 2. It is a knee guard, not a knee brace: there are no hinges and no ligament support. It carries no shin plate either.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black version keeps the guard visually quiet under any pant colour, and the dark Deflexion layer hides the grey dust film that builds up after a few dry laps. Black fabric does warm up a little more in direct sun, which the perforated sleeve offsets.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKnee guard (soft impact protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e16 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact material\u003c\/td\u003e\n\u003ctd\u003e3DF AirFit impact foam, perforated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter layer\u003c\/td\u003e\n\u003ctd\u003eDeflexion, abrasion resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleeve\u003c\/td\u003e\n\u003ctd\u003ePerforated neoprene, moisture-wicking\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention\u003c\/td\u003e\n\u003ctd\u003eSilicone-printed adjustable leg straps, anti-slip calf band\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e486 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033445519626,"sku":"5025202540","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033445552394,"sku":"5025202541","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033445585162,"sku":"5025202542","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033445617930,"sku":"5025202543","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033445650698,"sku":"5025202544","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-guard-3df-5-0-evo-black__1.png?v=1793444674"},{"product_id":"leatt-protection-kit-1-5-max-mini-kids-black","title":"Leatt Protection Kit 1.5 Max Mini – Kids – Black","description":"\u003cp\u003eThe Leatt Protection Kit 1.5 Max Mini is the complete starter set for the youngest riders. It brings together the 1.5 Fusion Vest Mini, which combines the 1.5 neck brace with the 1.5 Pro Mini Chest Guard, and a set of 1.5 Mini elbow and knee guards. In other words: neck, chest, shoulders, elbows and knees, all from one box.\u003c\/p\u003e\u003cp\u003eLeatt designed the Max Mini Kit for easy and fast kit-up, which matters when a small child is impatient to ride. The parts are durable and easy to clean, so the kit copes with muddy weekends and frequent washing.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eModular starter set: 1.5 Fusion Vest Mini plus 1.5 Mini elbow and knee guards\u003c\/li\u003e\n\u003cli\u003eIntegrated 1.5 neck brace in the vest\u003c\/li\u003e\n\u003cli\u003eRear thoracic strut designed to break away under extreme load\u003c\/li\u003e\n\u003cli\u003eChest and shoulder protection with FlexMesh\u003c\/li\u003e\n\u003cli\u003eHard-cap, vented FlexMesh elbow and knee guards\u003c\/li\u003e\n\u003cli\u003eVented foam padding for comfort\u003c\/li\u003e\n\u003cli\u003eKids sizes XXS\/XS and S\/M\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat Is in the Kit\u003c\/h2\u003e\u003cp\u003eThe core of the kit is the 1.5 Fusion Vest Mini. It pairs the 1.5 neck brace with the 1.5 Pro Mini Chest Guard, giving padded chest and shoulder protection constructed with FlexMesh. The neck brace has a rear thoracic strut that Leatt designed to break away under extreme load.\u003c\/p\u003e\u003cp\u003eLimb protection comes from the 1.5 Mini Elbow Guards and 1.5 Mini Knee Guards. Both use hard-cap FlexMesh with vents, backed by vented foam padding.\u003c\/p\u003e\u003ch2\u003eBuilt for Small Riders\u003c\/h2\u003e\u003cp\u003eThe kit is offered in two kids sizes, XXS\/XS and S\/M. Leatt focuses on comfort and quick handling: the parts are made to go on fast and to be easy to clean afterwards. Leatt does not publish a weight or a height range for this kit on its product page.\u003c\/p\u003e\u003ch2\u003eCertification\u003c\/h2\u003e\u003cp\u003eLeatt publishes an EU Declaration of Conformity for the kit and marks it as CE impact tested. The product page does not state individual EN standards or levels for the kit parts, so we do not list any here.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eLeatt gives no body height range for XXS\/XS and S\/M on this kit, so compare your child's measurements with the size chart in the manual or ask us before ordering. The neck brace in the Fusion Vest Mini only works when it fits correctly. If your child does not need a neck brace yet, the Protection Kit 1.5 Pro Mini contains the chest guard and limb guards without the brace.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe kit is black, with red accents on the inside of the neck brace and on the guard details, as Leatt's product photos show. Black works with any small jersey and pants combination and hides the dirt that young riders collect quickly.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003e1.5 Fusion Vest Mini (1.5 neck brace + 1.5 Pro Mini Chest Guard), 1.5 Mini Elbow Guards, 1.5 Mini Knee Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eNeck, chest, shoulders, elbows, knees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eRear thoracic strut designed to break away under extreme load\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGuards\u003c\/th\u003e\n\u003ctd\u003eHard-cap FlexMesh, vented foam padding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eKids XXS\/XS, S\/M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConformity\u003c\/th\u003e\n\u003ctd\u003eCE impact tested, EU Declaration of Conformity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"XXS\/XS \/ Black","offer_id":54033446371594,"sku":"5027011300","price":239.95,"currency_code":"EUR","in_stock":true},{"title":"S\/M \/ Black","offer_id":54033446404362,"sku":"5027011301","price":239.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-protection-kit-1-5-max-mini-kids-black__1.png?v=1793444688"},{"product_id":"leatt-protection-kit-1-5-pro-mini-kids-black","title":"Leatt Protection Kit 1.5 Pro Mini – Kids – Black","description":"\u003cp\u003eNot every young rider starts out with a neck brace, and the Leatt Protection Kit 1.5 Pro Mini is built exactly for that stage. It includes the 1.5 Pro Mini Chest Guard for chest and shoulders, plus 1.5 Mini elbow and knee guards, and leaves room to add a neck brace later.\u003c\/p\u003e\u003cp\u003eLeatt lists the whole set at 840 g. The kit is designed for easy kit-up and is durable and easy to clean, which counts when practice days follow each other closely.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStarter set: 1.5 Pro Mini Chest Guard plus 1.5 Mini elbow and knee guards\u003c\/li\u003e\n\u003cli\u003ePadded chest and shoulder protection with FlexMesh hard shell\u003c\/li\u003e\n\u003cli\u003eHard-cap, vented FlexMesh limb guards\u003c\/li\u003e\n\u003cli\u003eVented foam padding for comfort\u003c\/li\u003e\n\u003cli\u003ePrepared for riders who may add a neck brace later\u003c\/li\u003e\n\u003cli\u003eTotal weight 840 g, kids sizes XXS\/XS and S\/M\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eChest Guard for Small Riders\u003c\/h2\u003e\u003cp\u003eThe 1.5 Pro Mini Chest Guard is a comfortable, wearable padded protector for chest and shoulders, with a FlexMesh hard-shell front. Leatt describes it as comfortable and durable. In the bigger Max Mini Kit the same chest guard is combined with a 1.5 neck brace; here it comes on its own, so your child starts without a brace.\u003c\/p\u003e\u003ch2\u003eElbow and Knee Guards\u003c\/h2\u003e\u003cp\u003eThe 1.5 Mini Elbow and Knee Guards complete the kit with hard-cap FlexMesh protection. Vents in the shell and vented foam padding underneath keep them comfortable on warm days.\u003c\/p\u003e\u003ch2\u003eSizes and Handling\u003c\/h2\u003e\u003cp\u003eThe kit comes in two kids sizes, XXS\/XS and S\/M. Leatt lists the total weight at 840 g and ships the kit in plastic-free packaging. Leatt does not state a body height range for these sizes on its product page.\u003c\/p\u003e\u003ch2\u003eConformity\u003c\/h2\u003e\u003cp\u003eLeatt publishes an EU Declaration of Conformity for the Pro Mini Kit. Specific EN standards and levels are not given on the product page, so we do not quote any.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis kit does not include a neck brace. If you want neck protection from the start, the Protection Kit 1.5 Max Mini adds the 1.5 neck brace through the Fusion Vest Mini. Without a published height range, please compare your child's measurements with Leatt's size chart or contact us before ordering.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe Pro Mini Kit is black, with a dark grey chest guard and a red collar lining on Leatt's product images. The dark tone keeps the kit looking tidy after dusty laps and matches any junior outfit.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eContents\u003c\/th\u003e\n\u003ctd\u003e1.5 Pro Mini Chest Guard, 1.5 Mini Elbow Guards, 1.5 Mini Knee Guards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, shoulders, elbows, knees\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest guard\u003c\/th\u003e\n\u003ctd\u003ePadded, FlexMesh hard shell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGuards\u003c\/th\u003e\n\u003ctd\u003eHard-cap FlexMesh, vented foam padding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eKids XXS\/XS, S\/M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e840 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConformity\u003c\/th\u003e\n\u003ctd\u003eEU Declaration of Conformity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"XXS\/XS \/ Black","offer_id":54033447158026,"sku":"5027011350","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"S\/M \/ Black","offer_id":54033447190794,"sku":"5027011351","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-protection-kit-1-5-pro-mini-kids-black__1.png?v=1793444705"},{"product_id":"leatt-body-protector-2-5-black","title":"Leatt Body Protector 2.5 – Unisex – Black","description":"\u003cp\u003eThe Leatt Body Protector 2.5 is the entry into Leatt's hard-shell protector family, and even as the starting point it covers a lot: chest, back, shoulders and elbows, all CE-certified, with a solid chest plate that gives the front a properly closed surface against impacts and roost.\u003c\/p\u003e\u003cp\u003eWhat makes the 2.5 easy to live with is the FlexMesh construction. The plates are made as a perforated, mesh-type structure, so air keeps moving through the armour, and the whole protector flexes in three dimensions for a low-profile fit under or over the jersey. Riders who want hard-shell confidence for motocross, enduro or trail without a heavy feel will find it here.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard shell combined with ventilated FlexMesh plates\u003c\/li\u003e\n\u003cli\u003eSolid chest plate for better coverage against chest impacts\u003c\/li\u003e\n\u003cli\u003eCE Level 1: chest EN 1621-3, back EN 1621-2, shoulders and elbows EN 1621-1\u003c\/li\u003e\n\u003cli\u003eRemovable rear plate for over- or under-jersey use\u003c\/li\u003e\n\u003cli\u003eBraceOn™ compatible with Leatt neck braces\u003c\/li\u003e\n\u003cli\u003eKidney belt with height adjustment\u003c\/li\u003e\n\u003cli\u003eSide-entry zip for easier dressing\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 17 points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHard Shell Meets FlexMesh\u003c\/h2\u003e\u003cp\u003eThe 2.5 pairs a lightweight hard shell with Leatt FlexMesh. Rather than one rigid sheet, the plates are built as a mesh-type, perforated structure, which Leatt says enables maximum ventilation. At the front sits a solid chest plate that the manufacturer specifies for improved coverage against chest impacts.\u003c\/p\u003e\u003cp\u003eThe weight listed on Leatt's web page is 1.68 kg.\u003c\/p\u003e\u003ch2\u003eCertified to EN 1621\u003c\/h2\u003e\u003cp\u003eEvery zone is CE-tested at Level 1: the chest plate to EN 1621-3, the back plate to EN 1621-2, and the shoulder and elbow guards to EN 1621-1. The protector is also certified by the French Motorcycle Federation (FFM).\u003c\/p\u003e\u003cp\u003eOn its in-house protection score Leatt rates the 2.5 at 17 points. The score is a Leatt comparison figure, not a CE value.\u003c\/p\u003e\u003ch2\u003eNeck Brace and Jersey Set-Up\u003c\/h2\u003e\u003cp\u003eThe rear plate can be taken off. That, together with the BraceOn™ system, lets you run a Leatt neck brace either over or under the jersey. Riders without a brace simply keep the rear plate in place for full back coverage.\u003c\/p\u003e\u003ch2\u003eFit and Sizes\u003c\/h2\u003e\u003cp\u003eA flexible 3D design keeps the 2.5 low on the body, and a kidney belt with height adjustment sets the protector at the right level on your torso. The side-entry zip makes it simple to get in and out of without lifting the chest plate over your head.\u003c\/p\u003e\u003cp\u003eLeatt offers three sizes for riders from 160 to 196 cm: S\/M, L\/XL and XXL.\u003c\/p\u003e\u003ch2\u003eBase Fabric\u003c\/h2\u003e\u003cp\u003eUnder the plates, an anti-odour base layer of MoistureCool and AirMesh wicks sweat away from the skin. It is the part you feel all day, and it keeps the hard-shell protector from turning clammy on a warm afternoon. The 2.5 is shipped in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eAll zones of the 2.5 are certified at Level 1. If you want Level 2 for chest and back in a hard-shell protector, the Leatt 4.5 Evo and 5.5 Evo are the next steps. The protector is unisex; for women, Leatt offers a separate Body Protector 2.5 Women's with a contoured chest plate. The combined sizes S\/M and L\/XL cover a wide band each, so the kidney belt and straps do part of the fine fitting.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black version pairs a black mesh base with a dark grey chest plate and the 2.5 badge, as seen on Leatt's product photos. It is a neutral choice for riders who change jersey colours from race to race, and the darker plates hide scuffs from roost better than a bright finish would.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with FlexMesh, solid chest plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClosure\u003c\/th\u003e\n\u003ctd\u003eSide-entry zip, height-adjustable kidney belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible, removable rear plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e74 % TPU, 7 % cross-linked PE + mesh, 14 % fabric, 5 % other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL (160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.68 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033450139914,"sku":"5025202320","price":179.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033450172682,"sku":"5025202321","price":179.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033450205450,"sku":"5025202322","price":179.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-2-5-black__1.png?v=1793444848"},{"product_id":"leatt-body-protector-3-5-jr-kids-black-red","title":"Leatt Body Protector 3.5 Jr – Kids – Black\/Red","description":"\u003cp\u003eThe Leatt Body Protector 3.5 Jr pairs the comfort of soft 3DF foam with the confidence of a hard shell on chest and back, made specifically for younger riders. It is a two-part system: a zip-up compression suit with built-in shoulder and elbow protection, and a full hard-shell chest and back protector that is worn over the top.\u003c\/p\u003e\u003cp\u003eFor parents, the appeal is simple. The two-part design is easy to put on and take off, the front and back plates can be removed, and the protection is CE-certified in every zone. The 3.5 Jr is offered in the junior size L\/XL for riders from 147 to 159 cm.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eTwo-part system: compression suit plus hard-shell chest and back protector\u003c\/li\u003e\n\u003cli\u003eSoft 3DF foam in the suit, hard shell over chest and back\u003c\/li\u003e\n\u003cli\u003eCE Level 1: chest EN 1621-3, back EN 1621-2, shoulders and elbows EN 1621-1\u003c\/li\u003e\n\u003cli\u003eRemovable front and back plates\u003c\/li\u003e\n\u003cli\u003eKidney belt with height adjustment\u003c\/li\u003e\n\u003cli\u003eBraceOn™ compatible for Leatt neck braces\u003c\/li\u003e\n\u003cli\u003eJunior L\/XL for 147 to 159 cm, weight 1.53 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the System Works\u003c\/h2\u003e\u003cp\u003eThe compression suit closes with a zip and keeps the shoulder and elbow protection comfortably in place, so the guards stay where they belong. The hard-shell chest and back protector goes on over the suit and is held by a kidney belt with height adjustment, which lets you position it correctly on a growing torso.\u003c\/p\u003e\u003cp\u003eBecause suit and shell are separate parts, the modular design also makes it easier to take the protection off after a long day.\u003c\/p\u003e\u003ch2\u003eCertified Protection\u003c\/h2\u003e\u003cp\u003eLeatt has every zone of the 3.5 Jr CE-tested and certified as impact protection at Level 1: the chest to EN 1621-3, the back to EN 1621-2, and the shoulders and elbows to EN 1621-1. The protector is also certified by the French Motorcycle Federation (FFM). Leatt gives it 17 points on its in-house protection score.\u003c\/p\u003e\u003ch2\u003eAdaptable Set-Up\u003c\/h2\u003e\u003cp\u003eThe front and back plates are removable, so the protector can be adapted to the riding situation. The BraceOn™ system allows a Leatt neck brace to be integrated seamlessly, an important point for young riders who are already used to wearing one.\u003c\/p\u003e\u003cp\u003eInside the suit, Leatt combines the hard shell with the comfort of soft 3DF foam protection for shoulders and elbows. The result is a set that gives the chest and back a firm outer layer while the arms stay flexible, which is what Leatt means by protection that meets comfort and ventilation in an easy-to-wear system.\u003c\/p\u003e\u003ch2\u003eFit and Weight\u003c\/h2\u003e\u003cp\u003eA 3D design gives a comfortable, low-profile fit that lets young riders move freely. Leatt lists the weight as 1.53 kg and the size as Junior L\/XL for heights from 147 to 159 cm. The protector ships in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 3.5 Jr is available in one junior size, L\/XL, for 147 to 159 cm. Smaller children need a different model, for example the 4.5 Hybrid Jr in S\/M. All zones are certified at Level 1; if you want Level 2 on chest and back for your child, the 4.5 Hybrid Jr is the Leatt alternative.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack\/Red means a black compression suit and kidney belt, a grey hard shell over chest and back and bright red buckles at the sides, as shown on Leatt's images. The red buckles stand out clearly against the dark base, which hides the dirt of a day at the track.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eZip-up compression suit plus hard-shell chest and back protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtras\u003c\/th\u003e\n\u003ctd\u003eRemovable front and back plates, height-adjustable kidney belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSize\u003c\/th\u003e\n\u003ctd\u003eJunior L\/XL (147–159 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.53 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"L\/XL \/ Black\/Red","offer_id":54033455186186,"sku":"5023050951","price":199.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-3-5-jr-kids-black-red__1.png?v=1793444864"},{"product_id":"leatt-body-protector-3df-airfit-evo-black","title":"Leatt Body Protector 3DF AirFit Evo – Men's – Black","description":"\u003cp\u003eThe Leatt Body Protector 3DF AirFit Evo is Leatt's premium soft-shell protector: Level 2 for chest and back, combined with the all-day comfort of flexible foam. Riders who find hard-shell armour restrictive get serious certified coverage here, in a zip-up compression sock that moves with the body rather than against it.\u003c\/p\u003e\u003cp\u003eAn elastic chest strap holds the protector firmly in position, and the men's version is cut in the combined sizes S\/M, L\/XL and XXL. Leatt scores this men's version at 21 points on its protection scale, ahead of the Lite Evo's 18.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChest EN 1621-3 Level 2 and back EN 1621-2 Level 2\u003c\/li\u003e\n\u003cli\u003eShoulders and elbows EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eMulti-impact 3DF AirFit foam, soft and flexible\u003c\/li\u003e\n\u003cli\u003eElastic chest strap for secure positioning\u003c\/li\u003e\n\u003cli\u003eFull-length back protector and padded flanks\u003c\/li\u003e\n\u003cli\u003eEasy-to-wear, zip-up compression sock\u003c\/li\u003e\n\u003cli\u003eSlimmer BraceOn™ neck brace fitting system\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 21 points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection Where It Counts\u003c\/h2\u003e\u003cp\u003eLeatt has the 3DF AirFit Evo CE-tested and certified as impact protection in four zones. The chest pad reaches Level 2 under EN 1621-3, the full-length back protector Level 2 under EN 1621-2. Shoulders and elbows are covered to EN 1621-1 Level 1, and padded flanks extend protection down the sides.\u003c\/p\u003e\u003cp\u003eThe protector also carries FFM approval from the French Motorcycle Federation. Its 21 points on the Leatt protection score are a manufacturer rating that places it within Leatt's own range.\u003c\/p\u003e\u003ch2\u003eHow the Foam Works\u003c\/h2\u003e\u003cp\u003e3DF AirFit is Leatt's multi-impact, energy-absorbing foam. It stays soft and pliable while riding, adapts to the shape of the torso and, according to Leatt, keeps absorbing energy across more than one impact. Combined with maximum ventilation, Leatt positions it as comfortable, lightweight protection.\u003c\/p\u003e\u003cp\u003eLeatt's product data adds three details for this model: an enlarged chest impact area, enhanced mesh panels placed for better airflow in critical zones, and flatlock stitching on the MoistureCool compression sock, which keeps seams flat against the skin.\u003c\/p\u003e\u003ch2\u003eStaying in Place\u003c\/h2\u003e\u003cp\u003eSoft armour only works if it stays where it is meant to be. The Evo uses three things for that: the 3D shape, the compression sock with front zip, and an elastic chest strap that keeps the chest pad from riding up or sliding sideways in a crash.\u003c\/p\u003e\u003cp\u003eLeatt offers the men's version in S\/M, L\/XL and XXL. The manufacturer quotes a starting weight of 1.53 kg.\u003c\/p\u003e\u003ch2\u003eNeck Brace and Jersey\u003c\/h2\u003e\u003cp\u003eWith the new, slimmer BraceOn™ system the protector is ready for a Leatt neck brace. The soft foam lies flat, so the jersey drops over it without the boxy look of a hard-shell roost guard.\u003c\/p\u003e\u003ch2\u003eFabrics and Care\u003c\/h2\u003e\u003cp\u003eVentilated MoistureCool and AirMesh fabrics wick sweat away and are treated against odour. After the ride the Evo can be hand washed, which Leatt describes as easy. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 3DF AirFit Evo absorbs impacts with foam; there is no hard chest shell to deflect stones. For motocross with heavy roost, the 3DF AirFit Hybrid adds a hard shell over the same type of foam. Level 2 applies to chest and back; shoulders and elbows are Level 1.\u003c\/p\u003e\u003cp\u003eLeatt does not give a body height range for this men's version in S\/M to XXL. Please check the size chart in Leatt's manual or ask us before ordering.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThis men's 3DF AirFit Evo comes in Black. The pads show a subtle dark red dot pattern through the black mesh on Leatt's images, with a small Leatt AirFit logo on the chest. It is a low-key look that works under any team jersey and keeps grime from showing.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back, shoulders, elbows, padded flanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact material\u003c\/th\u003e\n\u003ctd\u003e3DF AirFit foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eZip-up compression sock, elastic chest strap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.53 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033455808778,"sku":"5024060580","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033455841546,"sku":"5024060581","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033455874314,"sku":"5024060582","price":299.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-3df-airfit-evo-black__1.png?v=1793444881"},{"product_id":"leatt-body-protector-3df-airfit-evo-women-black","title":"Leatt Body Protector 3DF AirFit Evo – Women's – Black","description":"\u003cp\u003eShaped specifically for women, the Leatt Body Protector 3DF AirFit Evo Women's gives female riders Level 2 chest and back protection without forcing them into a men's cut. The ergonomic fit follows a woman's torso, so the chest pad lies where it should and the compression sock does not gape at the waist or pull across the shoulders.\u003c\/p\u003e\u003cp\u003eUnderneath, the technology is the same soft 3DF AirFit foam that Leatt uses in its premium soft-shell protector: flexible while riding, built to take several hits, ventilated for long days. With sizes from XXS\/XS, it also fits smaller riders who struggle to find certified armour in their size.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eWomen's-specific ergonomic shape with padded flanks\u003c\/li\u003e\n\u003cli\u003eCE Level 2 for chest (EN 1621-3) and back (EN 1621-2)\u003c\/li\u003e\n\u003cli\u003eCE Level 1 for shoulders and elbows (EN 1621-1)\u003c\/li\u003e\n\u003cli\u003eSoft, multi-impact 3DF AirFit foam\u003c\/li\u003e\n\u003cli\u003eElastic chest strap keeps the protector in position\u003c\/li\u003e\n\u003cli\u003eZip-up compression sock with MoistureCool and AirMesh\u003c\/li\u003e\n\u003cli\u003eSizes XXS\/XS, S\/M and L for 148 to 178 cm\u003c\/li\u003e\n\u003cli\u003eBraceOn™ ready for Leatt neck braces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eA Cut for Women\u003c\/h2\u003e\u003cp\u003eLeatt describes this version as shaped for women, with a women's-specific ergonomic fit. In practice that means the compression sock and pads are proportioned for a female upper body, and the padded flanks wrap the sides for improved coverage rather than sitting too far forward or back.\u003c\/p\u003e\u003cp\u003eThe size run is XXS\/XS, S\/M and L, and Leatt specifies a body height range of 148 to 178 cm. The front zip makes the protector easy to put on, and the elastic chest strap adds a second point of hold over the chest.\u003c\/p\u003e\u003ch2\u003eCertified Protection\u003c\/h2\u003e\u003cp\u003eChest and back reach the higher Level 2 in their CE standards: EN 1621-3 for the chest and EN 1621-2 for the full-length back protector. Shoulders and elbows are certified to EN 1621-1 Level 1. The women's version has its own EU type certificate from Leatt and is approved by the French Motorcycle Federation (FFM).\u003c\/p\u003e\u003cp\u003eLeatt gives it 21 points on its in-house protection score, a manufacturer figure used to compare Leatt protectors.\u003c\/p\u003e\u003cp\u003eCompared with earlier versions, Leatt mentions a larger chest impact area. Mesh panels are reinforced where airflow matters most, and the compression sock is assembled with flatlock seams so nothing rubs under a tight jersey.\u003c\/p\u003e\u003ch2\u003eComfort and Ventilation\u003c\/h2\u003e\u003cp\u003e3DF AirFit is soft foam that absorbs energy on impact and moves freely the rest of the time. Leatt pairs it with ventilated MoistureCool and AirMesh fabrics, which wick sweat and resist odour, so the women's Evo stays comfortable on hot motocross days and long trail rides alike. The manufacturer quotes a weight from 1.53 kg.\u003c\/p\u003e\u003ch2\u003eNeck Brace Compatibility\u003c\/h2\u003e\u003cp\u003eIf you ride with a Leatt neck brace, the new, slimmer BraceOn™ fitting system gives it a seamless fit on the protector.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eHand washing is all it needs; Leatt describes the protector as easy to hand wash. It comes in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is a soft-shell protector. Stones and roost meet foam, not a hard plate, so riders who want a shell over the chest should look at a hard-shell or hybrid model. The top size is L; if you need a larger size, the unisex Leatt protectors go up to XXL. Shoulders and elbows are Level 1, the Level 2 rating covers chest and back.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe women's 3DF AirFit Evo comes in Black. On Leatt's photos, small red dots show through the black mesh across the pads, giving the protector a quietly technical look. Dark colours also hide the sweat and dust that build up over a long riding day.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eWomen's-specific ergonomic shape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back, shoulders, elbows, padded flanks\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact material\u003c\/th\u003e\n\u003ctd\u003e3DF AirFit foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eXXS\/XS, S\/M, L (148–178 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.53 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"XXS\/XS \/ Black","offer_id":54033456988426,"sku":"5026010760","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"S\/M \/ Black","offer_id":54033457021194,"sku":"5026010761","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033457053962,"sku":"5026010762","price":299.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-3df-airfit-evo-women-black__1.png?v=1793444894"},{"product_id":"leatt-body-protector-3df-airfit-hybrid-black","title":"Leatt Body Protector 3DF AirFit Hybrid – Unisex – Black","description":"\u003cp\u003eThe Leatt Body Protector 3DF AirFit Hybrid answers a simple question: why choose between soft and hard armour? Leatt places a hard shell over 3DF AirFit multi-impact foam, so the chest and back get the roost resistance of a plate and the energy absorption of soft protection at the same time, certified to Level 2.\u003c\/p\u003e\u003cp\u003eIt is also the model for riders who do not wear a neck brace. An extra upper-chest impact layer covers the area a brace would otherwise sit on, while the BraceOn™ system keeps the door open for adding a Leatt brace later. With 23 points, it carries a high Leatt protection score.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard shell reinforcing 3DF AirFit foam for impact and roost protection\u003c\/li\u003e\n\u003cli\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2\u003c\/li\u003e\n\u003cli\u003eShoulders and elbows EN 1621-1 Level 1, plus flank protection\u003c\/li\u003e\n\u003cli\u003eExtra upper-chest layer for riders without a neck brace\u003c\/li\u003e\n\u003cli\u003eSolid chest plate with side-entry zip\u003c\/li\u003e\n\u003cli\u003eZip-up compression sock and elastic chest strap\u003c\/li\u003e\n\u003cli\u003eISR rated and FFM certified\u003c\/li\u003e\n\u003cli\u003eSizes S\/M, L\/XL, XXL for 160 to 196 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTwo Layers of Protection\u003c\/h2\u003e\u003cp\u003eAt the core of the Hybrid is 3DF AirFit, Leatt's soft multi-impact energy-absorbing foam. On top, a hard shell spreads the force of a hit and shrugs off stones thrown up from the track. According to Leatt, this hard-shell reinforcement improves both impact and roost protection.\u003c\/p\u003e\u003cp\u003eThe result is certified as CE impact protection at Level 2 for the chest (EN 1621-3) and the back (EN 1621-2). Shoulders and elbows are covered to EN 1621-1 Level 1, and dedicated flank protection guards the sides of the torso.\u003c\/p\u003e\u003ch2\u003eRiding With or Without a Neck Brace\u003c\/h2\u003e\u003cp\u003eNot every rider wears a neck brace, and Leatt has designed the Hybrid for both cases. Without a brace, an extra upper-chest impact protection layer covers the top of the chest. With one, the new, slimmer BraceOn™ fitting system gives a Leatt neck brace its seat on the protector.\u003c\/p\u003e\u003ch2\u003eFit and Closure\u003c\/h2\u003e\u003cp\u003eA solid chest plate with a side-entry zip gives better coverage for chest impacts, according to Leatt. Underneath, a zip-up compression sock is designed for maximum evaporation and holds the pads in place, while an elastic chest strap adds a second point of stability.\u003c\/p\u003e\u003cp\u003eLeatt offers the Hybrid in S\/M, L\/XL and XXL for heights from 160 to 196 cm, with a weight from 1.628 kg.\u003c\/p\u003e\u003ch2\u003eMaterials and Approvals\u003c\/h2\u003e\u003cp\u003eThe compression garment uses anti-odour MoistureCool and AirMesh wicking fabrics. According to the composition supplied by Leatt, the protector is made of 30 % nylon, 20 % EVA, 18 % polyurethane, 15 % polyester, 13 % TPU and 4 % other materials.\u003c\/p\u003e\u003cp\u003eBesides CE, the Hybrid is ISR rated and approved by the French Motorcycle Federation (FFM). Leatt's own protection score puts it at 23 points.\u003c\/p\u003e\u003ch2\u003eCare\u003c\/h2\u003e\u003cp\u003eLeatt rates the Hybrid as easy to hand wash. It is delivered in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe Hybrid is built around its hard shell; riders who prefer armour that is soft all over should compare it with the 3DF AirFit Evo, which uses 3DF AirFit foam without a shell. Shoulders and elbows are certified at Level 1, chest and back at Level 2. The upper-chest layer is aimed at riders without a neck brace; with a brace fitted, the BraceOn™ system takes over that area.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe Hybrid is black, with a grey hard-shell chest plate carrying the Hybrid lettering on Leatt's product images. The contrast makes the plate easy to spot when you check its position in the mirror before the start, and the black compression sock hides dirt after a wet race.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell over 3DF AirFit foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtras\u003c\/th\u003e\n\u003ctd\u003eFlank protection, upper-chest layer for non-neck brace users\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClosure\u003c\/th\u003e\n\u003ctd\u003eSide-entry zip, compression sock, elastic chest strap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e30 % nylon, 20 % EVA, 18 % PU, 15 % polyester, 13 % TPU, 4 % other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL (160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.628 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, ISR rated, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033458069770,"sku":"5020004200","price":349.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033458102538,"sku":"5020004201","price":349.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033458135306,"sku":"5020004202","price":349.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-3df-airfit-hybrid-black__1.png?v=1793444917"},{"product_id":"leatt-body-protector-4-5-evo-black","title":"Leatt Body Protector 4.5 Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Body Protector 4.5 Evo is where hard-shell protection reaches Level 2 on chest and back while staying cool. Leatt combines a hard shell with FlexMesh Pro, an articulated, vented structure with flex joints, so the armour bends with you in three dimensions instead of riding on your torso like a board.\u003c\/p\u003e\u003cp\u003eLeatt states that the Evo is 11 % lighter and 50 % more ventilated than its predecessor. For motocross and enduro riders who want certified chest and back protection at the higher level without overheating in the second moto, that is the core argument.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHard shell with articulated FlexMesh Pro for airflow and natural movement\u003c\/li\u003e\n\u003cli\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2\u003c\/li\u003e\n\u003cli\u003eShoulders and elbows EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eExtended back plate and flank panels for rib and side coverage\u003c\/li\u003e\n\u003cli\u003eSeparate compression suit plus height-adjustable kidney belt\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear plates, slimmer BraceOn™ system\u003c\/li\u003e\n\u003cli\u003eISR rated and FFM certified, Leatt protection score of 22 points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVentilation Built Into the Shell\u003c\/h2\u003e\u003cp\u003eFlexMesh Pro is the reason the 4.5 Evo breathes. Flex joints between the segments allow 3D flexing, so the protector follows you when you crouch into a corner or stretch over the bars.\u003c\/p\u003e\u003cp\u003eLeatt quotes a 50 % improvement in ventilation and 11 % less weight compared with the previous model. Both figures are manufacturer data.\u003c\/p\u003e\u003ch2\u003eProtection and Approvals\u003c\/h2\u003e\u003cp\u003eChest and back are CE-tested and certified as impact protection at Level 2, to EN 1621-3 and EN 1621-2. The shoulder and elbow protectors meet EN 1621-1 at Level 1. An extended back plate and flank panels provide additional rib and side protection.\u003c\/p\u003e\u003cp\u003eThe 4.5 Evo is ISR rated and certified by the French Motorcycle Federation (FFM). On Leatt's in-house protection score it reaches 22 points.\u003c\/p\u003e\u003ch2\u003eTwo Parts, One System\u003c\/h2\u003e\u003cp\u003eThe protector is paired with a separate compression suit that carries the elbow and shoulder protection. Leatt designed this set-up for maximum comfort and flexibility. A kidney belt with height adjustment positions the hard shell correctly on your torso.\u003c\/p\u003e\u003ch2\u003eNeck Brace Set-Up\u003c\/h2\u003e\u003cp\u003eBoth the front and rear plates are removable. Together with the new, slimmer BraceOn™ system, that lets you fit a Leatt neck brace in the way that suits you, and riders without a brace keep the plates in place for full coverage.\u003c\/p\u003e\u003ch2\u003eSizes and Materials\u003c\/h2\u003e\u003cp\u003eLeatt sizes the 4.5 Evo in five steps, S, M, L, XL and XXL, for heights between 160 and 196 cm. The listed weight is 1.92 kg. According to the composition supplied by Leatt, it is made of 45 % polypropylene, 20 % EVA, 20 % nylon, 10 % TPU and 5 % other materials. The protector comes in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 4.5 Evo is a hard-shell system and weighs more than Leatt's soft-foam protectors; the manufacturer lists 1.92 kg. If you want even more coverage on the flanks, the 5.5 Evo adds adjustable hard flank panels.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eIn black, the 4.5 Evo combines a black shell and suit with red accents around the chest and a white buckle detail, as shown on Leatt's product images. It is a sporty look that still lets a team jersey take centre stage.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with FlexMesh Pro, separate compression suit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtras\u003c\/th\u003e\n\u003ctd\u003eExtended back plate, flank panels, height-adjustable kidney belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e45 % PP, 20 % EVA, 20 % nylon, 10 % TPU, 5 % other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS, M, L, XL, XXL (160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.92 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, ISR rated, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033459052810,"sku":"5025202300","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033459085578,"sku":"5025202301","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033459118346,"sku":"5025202302","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033459151114,"sku":"5025202303","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033459183882,"sku":"5025202304","price":299.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-4-5-evo-black__2.png?v=1793444940"},{"product_id":"leatt-body-protector-4-5-hybrid-jr-kids-black","title":"Leatt Body Protector 4.5 Hybrid Jr – Kids – Black","description":"\u003cp\u003eThe Leatt Body Protector 4.5 Hybrid Jr gives young riders the hybrid principle of Leatt's adult protectors: a lightweight FlexMesh Pro hard-shell panel on the chest to stop roost, and soft 3DF AirFit foam on the back for comfort, both certified to Level 2.\u003c\/p\u003e\u003cp\u003eIt comes as two parts. A zip-up suit carries the shoulder and elbow guards, and a pull-over chest and back protector goes on top. The suit keeps the limb protection secure while allowing natural movement, and the pull-over protector adds the chest and back armour on top.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned specifically for young riders\u003c\/li\u003e\n\u003cli\u003eFlexMesh Pro hard-shell chest panel for roost protection\u003c\/li\u003e\n\u003cli\u003eSoft 3DF AirFit back protector\u003c\/li\u003e\n\u003cli\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2\u003c\/li\u003e\n\u003cli\u003eShoulders and elbows EN 1621-1 Level 1 in the zip-up suit\u003c\/li\u003e\n\u003cli\u003eSlimmer BraceOn™ system for Leatt neck braces over or under the shirt\u003c\/li\u003e\n\u003cli\u003eWeight 1.16 kg, sizes S\/M and L\/XL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHybrid Protection for Juniors\u003c\/h2\u003e\u003cp\u003eAt the front, a FlexMesh Pro hard-shell panel takes the hits from roost and impacts and lets air through its vented structure. At the back, soft 3DF AirFit impact foam provides certified protection with a softer feel. Leatt describes this as the ideal balance of ventilation and comfort for young riders.\u003c\/p\u003e\u003cp\u003eBoth main zones are CE-tested and certified as impact protection at Level 2: the chest to EN 1621-3, the back to EN 1621-2. The shoulder and elbow guards in the suit meet EN 1621-1 at Level 1. Leatt's in-house protection score puts the 4.5 Hybrid Jr at 22 points.\u003c\/p\u003e\u003ch2\u003eEasy for Kids to Wear\u003c\/h2\u003e\u003cp\u003eThe zip-up compression suit keeps the shoulder and elbow guards secure while still allowing natural movement. The chest and back protector is simply pulled over the top, and flexible 3D construction keeps the whole set in place. Leatt lists the weight at 1.16 kg.\u003c\/p\u003e\u003ch2\u003eNeck Brace Compatibility\u003c\/h2\u003e\u003cp\u003eWith the new, slimmer BraceOn™ system, a Leatt neck brace can be worn over or under the shirt. That makes the 4.5 Hybrid Jr a good base if your child rides with a junior neck brace or will add one later.\u003c\/p\u003e\u003cp\u003eThe pull-over protector and the suit are separate pieces, so the chest and back armour sits on top of the brace-friendly base layer rather than being sewn into it. Leatt describes the set-up as keeping everything secure while still letting the rider move naturally on the bike.\u003c\/p\u003e\u003ch2\u003eSizes and Material\u003c\/h2\u003e\u003cp\u003eLeatt offers two junior sizes, S\/M and L\/XL. According to the material breakdown supplied by Leatt, the protector consists of 57 % polyethylene, 22 % polyurethane, 15 % EVA, 5 % polyoxymethylene and 1 % metal. It is delivered in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eLeatt does not publish a body height range for the 4.5 Hybrid Jr on its product page, so compare your child's chest and height with the size chart in the manual or ask us before ordering. Shoulders and elbows are Level 1.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black 4.5 Hybrid Jr carries red buckle details on the chest plate on Leatt's product images. Black suits every junior kit and does not show the marks a young rider collects on a muddy practice day.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eZip-up suit plus pull-over chest and back protector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eFlexMesh Pro hard shell, EN 1621-3 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003e3DF AirFit foam, EN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible, over or under the shirt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e57 % PE, 22 % PU, 15 % EVA, 5 % POM, 1 % metal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eJunior S\/M, L\/XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.16 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033460068618,"sku":"5026011760","price":199.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033460101386,"sku":"5026011761","price":199.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-4-5-hybrid-jr-kids-black__2.png?v=1793444958"},{"product_id":"leatt-body-protector-5-5-evo-black","title":"Leatt Body Protector 5.5 Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Body Protector 5.5 Evo sits at the top of Leatt's hard-shell line and is designed for riders who push their limits. Its signature feature is a set of adjustable hard flank panels that wrap the ribs and sides, combined with an extended back plate and Level 2 certification for chest and back.\u003c\/p\u003e\u003cp\u003eDespite that coverage, the 5.5 Evo keeps the airflow of FlexMesh Pro. Leatt states that the current version is 19 % lighter and 50 % more ventilated than the previous model, and gives it 24 points on its protection score, the highest figure in this group of Leatt body protectors.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAdjustable hard flank panels for rib and side protection\u003c\/li\u003e\n\u003cli\u003eExtended back plate\u003c\/li\u003e\n\u003cli\u003eCE Level 2: chest EN 1621-3, back EN 1621-2\u003c\/li\u003e\n\u003cli\u003eCE Level 1: shoulders and elbows EN 1621-1\u003c\/li\u003e\n\u003cli\u003eHard shell with articulated FlexMesh Pro\u003c\/li\u003e\n\u003cli\u003eSeparate compression suit with front zip\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear plates, slimmer BraceOn™\u003c\/li\u003e\n\u003cli\u003eISR rated, FFM certified, 24 points on the Leatt protection score\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCoverage on the Sides\u003c\/h2\u003e\u003cp\u003eThe 5.5 Evo puts particular emphasis on the sides of the torso. It uses hard flank panels that you can adjust to your build, so they sit close over the ribs instead of flapping. The extended back plate lengthens spinal coverage, and Leatt describes the combination as great rib and side protection.\u003c\/p\u003e\u003ch2\u003eCertified Protection\u003c\/h2\u003e\u003cp\u003eChest and back are CE-tested and certified at Level 2 under EN 1621-3 and EN 1621-2. The shoulder and elbow guards, integrated in the compression suit, are certified to EN 1621-1 Level 1. The 5.5 Evo is also ISR rated and approved by the French Motorcycle Federation (FFM).\u003c\/p\u003e\u003cp\u003eLeatt's protection score of 24 points is a manufacturer rating used to compare its own protectors.\u003c\/p\u003e\u003ch2\u003eHard Shell That Moves\u003c\/h2\u003e\u003cp\u003eThe shell is combined with FlexMesh Pro, an articulated structure with flex joints that allow 3D flexing and natural movement. Leatt describes the 5.5 Evo as ventilated protection that keeps you cool, and quotes 50 % more ventilation and 19 % less weight compared with the previous model.\u003c\/p\u003e\u003cp\u003eAccording to the composition supplied by Leatt, the protector consists of 43 % TPU, 30 % high-density polyethylene, 11 % fabric, 11 % cross-linked polyethylene and Lycra, and 5 % other materials. The listed weight is 2.40 kg.\u003c\/p\u003e\u003ch2\u003eModular Fit\u003c\/h2\u003e\u003cp\u003eThe hard-shell protector is worn over a separate compression suit with a front zip and integrated shoulder and elbow protection. A height-adjustable kidney belt sets the shell at the right point on your torso. Front and rear plates are removable, and the new, slimmer BraceOn™ system makes the protector compatible with Leatt neck braces.\u003c\/p\u003e\u003cp\u003eLeatt offers sizes S, M, L, XL and XXL for heights from 160 to 196 cm.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eMaximum coverage comes with weight: at 2.40 kg according to Leatt, the 5.5 Evo is the heaviest protector in this group, and the hard flank panels need a moment to adjust properly. If you mainly ride trails and value low weight over side coverage, a lighter model such as the 4.5 Evo or a soft-shell AirFit protector may suit you better. Shoulders and elbows are Level 1.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black 5.5 Evo shows red buckles and red accents on the chest plate on Leatt's product images, giving the protector a racier look than an all-black finish. Under a jersey the red disappears, so it works with any colour scheme.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with FlexMesh Pro, separate compression suit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders and elbows\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtras\u003c\/th\u003e\n\u003ctd\u003eAdjustable hard flank panels, extended back plate, height-adjustable kidney belt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn™ compatible, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e43 % TPU, 30 % HDPE, 11 % fabric, 11 % cross-linked PE and Lycra, 5 % other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS, M, L, XL, XXL (160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e2.40 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, ISR rated, FFM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033460887818,"sku":"5025202260","price":359.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033460920586,"sku":"5025202261","price":359.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033460953354,"sku":"5025202262","price":359.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033460986122,"sku":"5025202263","price":359.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033461018890,"sku":"5025202264","price":359.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-body-protector-5-5-evo-black__2.png?v=1793444975"},{"product_id":"leatt-chest-guard-1-5-pro-mini-kids-black","title":"Leatt Chest Guard 1.5 Pro Mini – Kids – Black","description":"\u003cp\u003eThe Leatt Chest Guard 1.5 Pro Mini is made for the youngest riders: a durable chest guard with FlexMesh impact technology, shoulder pads and straps designed especially for kids. Its perforated, flexible design is built for maximum ventilation, so little ones stay cool and confident on the bike.\u003c\/p\u003e\u003cp\u003eAt 450 g and in sizes XXS\/XS and S\/M, this black guard is CE certified as personal protective equipment and fits easily with a Leatt neck brace.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE tested and certified to PPE Regulation (EU) 2016\/425\u003c\/li\u003e\n\u003cli\u003eHard-shell protection with comfortable FlexMesh construction\u003c\/li\u003e\n\u003cli\u003ePerforated, flexible design for excellent ventilation\u003c\/li\u003e\n\u003cli\u003eShoulder pads and ergonomically designed buckle\u003c\/li\u003e\n\u003cli\u003eElastic, adjustable waist straps and kid-specific strap tabs\u003c\/li\u003e\n\u003cli\u003eLow-profile design that fits with a Leatt neck brace\u003c\/li\u003e\n\u003cli\u003e450 g, protection score of 3 points per Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesigned for Little Riders\u003c\/h2\u003e\u003cp\u003eLeatt describes the 1.5 Pro Mini as lightweight protection for the youngest riders. Strap tabs designed especially for kids, an ergonomic buckle and elastic waist straps make it simple to put on and keep secure. The straps adjust, so the guard can follow a young rider as they grow within the size.\u003c\/p\u003e\u003ch2\u003eProtection and Certification\u003c\/h2\u003e\u003cp\u003eThe chest guard is CE tested and certified as personal protective equipment under Regulation (EU) 2016\/425; according to Leatt's product data, it is certified to EN 14021, the standard for roost and stone protection. Shoulder pads extend the covered area. Leatt rates the 1.5 Pro Mini at 3 points on its protection score.\u003c\/p\u003e\u003ch2\u003eFlexMesh and Comfort\u003c\/h2\u003e\u003cp\u003eFlexMesh impact technology combines a durable hard shell with a flexible, perforated structure. A padded base layer stops the hard shell from rubbing on the skin, and the close fit allows the guard to be worn over or under the jersey.\u003c\/p\u003e\u003cp\u003eLeatt lists the materials as 77% polyethylene, 20% polyester and 3% polyurethane.\u003c\/p\u003e\u003ch2\u003eVentilation\u003c\/h2\u003e\u003cp\u003eThe perforated design is aimed at maximum airflow.\u003c\/p\u003e\u003ch2\u003eNeck Brace Fit and Sizes\u003c\/h2\u003e\u003cp\u003eThe low-profile shape fits easily with a Leatt neck brace. Two sizes are available, XXS\/XS and S\/M; Leatt does not publish a height chart for this model, so please check the fit on your child.\u003c\/p\u003e\u003ch2\u003eThe First Step in Leatt's Kids Range\u003c\/h2\u003e\u003cp\u003eAmong Leatt's kids' chest protection, the 1.5 Pro Mini sits at the entry point with a protection score of 3 points, alongside the 2.5 Mini. What sets it apart is the FlexMesh construction and the shoulder pads, which give small riders a little more coverage while keeping the guard light and airy. Plastic-free packaging and a published PFAS statement round off the package.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 1.5 Pro Mini is a roost-level chest guard, not an EN 1621 impact protector, and Leatt's product page names the PPE regulation rather than a specific standard; the EN 14021 reference comes from Leatt's product data. It is intended for very young riders, so older kids will need a junior model.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack is a practical colour for the youngest riders: it hides dirt, matches every small kit and looks tidy whether the guard is worn under or over the jersey.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Guard 1.5 Pro Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, with shoulder pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003ePPE Regulation (EU) 2016\/425; EN 14021 per Leatt product data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with FlexMesh, padded base layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e77% polyethylene, 20% polyester, 3% polyurethane\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e450 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eXXS\/XS, S\/M\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eLow-profile design for Leatt neck braces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e3 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"XXS\/XS \/ Black","offer_id":54033464262922,"sku":"5026011610","price":54.95,"currency_code":"EUR","in_stock":true},{"title":"S\/M \/ Black","offer_id":54033464295690,"sku":"5026011611","price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-guard-1-5-pro-mini-kids-black__2.png?v=1793445025"},{"product_id":"leatt-chest-protector-1-5-white","title":"Leatt Chest Protector 1.5 – Unisex – White","description":"\u003cp\u003eClean, white and light at 695 g, the Leatt Chest Protector 1.5 White is a classic roost guard for riders who want a bright look over the jersey. The hard shell is certified to EN 14021 for roost and stone protection at the chest, and it extends to the back for extra cover from debris.\u003c\/p\u003e\u003cp\u003eIt suits riders from 60 to 90 kg in one adult size and is designed to stay comfortable on long days, whether you ride motocross tracks, enduro loops or trails.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEN 14021 roost certification for the chest\u003c\/li\u003e\n\u003cli\u003eHard-shell front and back plates, both removable\u003c\/li\u003e\n\u003cli\u003eComfort from a padded base layer\u003c\/li\u003e\n\u003cli\u003eVentilation slots and a 3D-shaped fit\u003c\/li\u003e\n\u003cli\u003eBraceOn compatible for Leatt neck braces\u003c\/li\u003e\n\u003cli\u003eClose-fitting for use under or over the jersey\u003c\/li\u003e\n\u003cli\u003eWeight 695 g; Leatt rates it at 3 protection points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt Around Roost\u003c\/h2\u003e\u003cp\u003eOn a busy start straight or behind another rider in a sand section, roost is constant. The white 1.5 is built for this: its chest is certified to EN 14021, the European standard for off-road stone shields. Leatt places it at 3 points on its own protection score, the lightest adult option in this line-up.\u003c\/p\u003e\u003ch2\u003eLightweight Construction\u003c\/h2\u003e\u003cp\u003eA light hard shell sits over a padded base layer, and Leatt's 3D shaping keeps the plates close to the body. The 1.5 is made from 60% HDPE, 30% EVA foam padding and 10% polyester straps and mesh, according to Leatt's data.\u003c\/p\u003e\u003ch2\u003eRemovable Plates\u003c\/h2\u003e\u003cp\u003eBoth the front and back plates are removable. That lets you strip the protector down or adjust the configuration for your neck brace, and Leatt's BraceOn fitment system makes a Leatt brace sit cleanly on the plates.\u003c\/p\u003e\u003ch2\u003eStaying Cool\u003c\/h2\u003e\u003cp\u003eVentilation slots let air through the shell to keep you cooler. Combined with the light weight of 695 g and a white finish that reflects sunlight, the 1.5 White is well suited to summer riding.\u003c\/p\u003e\u003ch2\u003eSize Guide\u003c\/h2\u003e\u003cp\u003eThere is one adult size, S-XL, which Leatt recommends for riders between 60 and 90 kg.\u003c\/p\u003e\u003ch2\u003eWho It Is For\u003c\/h2\u003e\u003cp\u003eThe white 1.5 is aimed at riders who want protection from roost first and foremost: trail riders, enduro riders on long loops and motocross riders on practice days. Leatt sums it up as lightweight roost protection for everyday riding, and with a protection score of 3 points it is the lightest adult option in the line-up. Riders who need certified impact protection should compare it with the 3.5, which reaches CE Level 1 at chest and back.\u003c\/p\u003e\u003ch2\u003eManual, Certificate and Packaging\u003c\/h2\u003e\u003cp\u003eLeatt publishes a manual, an EU type certificate and a declaration of conformity for the Chest Protector 1.5, together with a PFAS statement. It ships in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe certification of the 1.5 is EN 14021 for roost on the chest; it is not an EN 1621 impact protector, and Leatt shows no certification for the back plate. White shows dirt faster than black. Riders above 90 kg are outside Leatt's size range for this model.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eWhite gives the 1.5 a bright, classic motocross look and suits colourful race jerseys. It stays cooler in the sun than darker colours, but expect mud and scuffs to show quickly, so a wipe after wet rides keeps it looking fresh.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 1.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest and back (roost protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 14021 (roost protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eLightweight hard shell with padded base layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e60% HDPE, 30% EVA foam, 10% polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e695 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS-XL (adult, 60–90 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system, removable front and back plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e3 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S-XL \/ White","offer_id":54033467113738,"sku":"5023050800","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-1-5-white__1.png?v=1793445047"},{"product_id":"leatt-chest-protector-2-5-mini-kids-black-red","title":"Leatt Chest Protector 2.5 Mini – Kids – Black\/Red","description":"\u003cp\u003eSmall riders get hit by roost too. The Leatt Chest Protector 2.5 Mini in Black\/Red is a lightweight hard-shell guard for children from 110 to 134 cm, certified to EN 14021 for roost and stone protection on the chest. It is built for young motocross and off-road riders who need dependable protection from flying debris without heavy plates.\u003c\/p\u003e\u003cp\u003eWith child-friendly buckles, adjustable waist straps and a weight of around 450 g, the 2.5 Mini is easy for kids to wear and simple for parents to fit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE certified to EN 14021 for roost and stone protection\u003c\/li\u003e\n\u003cli\u003eDurable HDPE hard shell\u003c\/li\u003e\n\u003cli\u003ePadded base layer prevents rubbing on the skin\u003c\/li\u003e\n\u003cli\u003e3D ergonomic design with adjustable waist straps\u003c\/li\u003e\n\u003cli\u003eChild-friendly, easy-to-handle buckles\u003c\/li\u003e\n\u003cli\u003eBraceOn recesses front and back for Leatt neck braces\u003c\/li\u003e\n\u003cli\u003eFor children 110–134 cm, approx. 450 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat EN 14021 Means\u003c\/h2\u003e\u003cp\u003eEN 14021 is the European standard for stone-shield protectors used by off-road riders. It covers protection against roost, the stones and dirt thrown up by the rear wheels of other bikes. The 2.5 Mini is certified to this standard for the chest, which is exactly the kind of protection young riders need when following others on the track. Leatt gives it 3 points on its own protection score.\u003c\/p\u003e\u003ch2\u003eComfort for Kids\u003c\/h2\u003e\u003cp\u003eA padded base layer sits between the hard shell and the skin to stop rubbing, and the 3D ergonomic shape gives a snug fit with plenty of freedom to move. The slim profile allows your child to wear it over or under the jersey.\u003c\/p\u003e\u003cp\u003eAccording to Leatt's data, the protector is made from 60% high-density polyethylene, 30% EVA foam for the padded liner and 10% polyester for straps and mesh.\u003c\/p\u003e\u003ch2\u003eEasy to Put On\u003c\/h2\u003e\u003cp\u003eAdjustable waist straps and buckles designed for children's hands make fitting quick, even with gloves nearby and a rider eager to get going. Generous ventilation keeps young riders cooler during practice.\u003c\/p\u003e\u003ch2\u003eNeck Brace Compatibility\u003c\/h2\u003e\u003cp\u003eRecessed areas at the front and back allow a Leatt neck brace to sit properly, so the 2.5 Mini fits into a full protection set-up whether the brace is worn over or under the jersey.\u003c\/p\u003e\u003ch2\u003eSizing\u003c\/h2\u003e\u003cp\u003eThe 2.5 Mini is sized for children between 110 and 134 cm in height. Leatt's product data lists a weight of about 450 g.\u003c\/p\u003e\u003ch2\u003eWhere the 2.5 Mini Fits\u003c\/h2\u003e\u003cp\u003eLeatt's protection score helps place the 2.5 Mini: with 3 points it is a roost guard, designed to keep stones and debris off a young rider's chest. Kids who outgrow the 110–134 cm range can move on to Leatt's junior protectors, which add certified impact protection for the back or the chest. Until then, the Black\/Red 2.5 Mini offers what small riders need most on a dirt track: a light shell that turns away roost.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 2.5 Mini is a roost protector certified to EN 14021, not an impact protector to EN 1621. It protects against stones and debris, but it is not tested for the type of impact energy covered by Level 1 or Level 2 protectors. For certified impact protection, look at Leatt's junior hybrid or 3.5 Jr models once your child has grown.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack\/Red pairs a dirt-friendly black base with red details that give the small protector a bold, racing look. It matches many kids' kits and keeps looking neat after muddy sessions.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 2.5 Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest (roost and stone protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eEN 14021 (roost protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHDPE hard shell with padded base layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e60% HDPE, 30% EVA foam, 10% polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 450 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003e110–134 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn recesses front and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e3 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"110-134cm \/ Black\/Red","offer_id":54033472684298,"sku":"5016100601","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-2-5-mini-kids-black-red__1.png?v=1793445074"},{"product_id":"leatt-chest-protector-2-5-mini-kids-orange-black","title":"Leatt Chest Protector 2.5 Mini – Kids – Orange\/Black","description":"\u003cp\u003eBright orange on a black base makes the Leatt Chest Protector 2.5 Mini Orange\/Black one of the easiest kids' protectors to spot on track. It is a light roost guard for young riders between 110 and 134 cm, with an HDPE hard shell certified to EN 14021 against stones and debris.\u003c\/p\u003e\u003cp\u003eParents will like the child-friendly buckles and adjustable waist straps; kids will like that it weighs only about 450 g and leaves them free to move.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eRoost and stone protection certified to EN 14021\u003c\/li\u003e\n\u003cli\u003eLightweight HDPE shell over a padded liner\u003c\/li\u003e\n\u003cli\u003eSlim enough for over- or under-jersey use\u003c\/li\u003e\n\u003cli\u003eGenerous ventilation for warm days\u003c\/li\u003e\n\u003cli\u003eErgonomic buckles designed for children\u003c\/li\u003e\n\u003cli\u003eRecessed BraceOn areas for neck brace fitment\u003c\/li\u003e\n\u003cli\u003eLeatt score of 3 points, sized for 110–134 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRoost Protection, Certified\u003c\/h2\u003e\u003cp\u003eLeatt certifies the 2.5 Mini to EN 14021, the standard for off-road stone shields. It focuses on keeping roost and debris off a young rider's chest, which is one of the most common knocks in junior motocross. On Leatt's own scale, the Mini scores 3 points.\u003c\/p\u003e\u003ch2\u003eFit for Small Bodies\u003c\/h2\u003e\u003cp\u003eThe 3D ergonomic shape and adjustable waist straps let you set a snug fit for children from 110 to 134 cm tall. A padded base layer keeps the hard shell from rubbing, and the profile is slim enough that the protector can go over or under the jersey.\u003c\/p\u003e\u003cp\u003eLeatt's data gives the material split as 60% HDPE, 30% EVA foam padding and 10% polyester straps and mesh.\u003c\/p\u003e\u003ch2\u003eHandling for Little Hands\u003c\/h2\u003e\u003cp\u003eThe buckles are designed specifically for kids, so many children can close them with little help. That makes getting ready at the track quicker and less of a struggle.\u003c\/p\u003e\u003ch2\u003eVentilation\u003c\/h2\u003e\u003cp\u003eLeatt describes the 2.5 Mini as generously ventilated with optimised airflow, which helps keep kids comfortable during warm practice sessions.\u003c\/p\u003e\u003ch2\u003eNeck Brace Ready\u003c\/h2\u003e\u003cp\u003eRecesses in the front and back allow a Leatt neck brace to fit perfectly, whether it is worn over or under the jersey.\u003c\/p\u003e\u003ch2\u003eUse and Next Steps\u003c\/h2\u003e\u003cp\u003eThe orange 2.5 Mini is made for young motocross and off-road riders who are just starting out or ride regularly at club level. It concentrates on roost, the most frequent nuisance for kids riding behind others. Once your child grows past 134 cm, Leatt's junior models such as the 2.5 Hybrid Jr or the 3.5 Jr take over with certified impact protection.\u003c\/p\u003e\u003cp\u003eThe protector can be worn over or under the jersey, so it works with both loose motocross tops and tighter enduro shirts.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is a roost protector under EN 14021, not an EN 1621 impact protector, and it has no shoulder or back impact certification. It fits children between 110 and 134 cm; bigger kids should move to Leatt's junior range. The weight of about 450 g comes from Leatt's product data.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eOrange\/Black is the high-visibility choice in the 2.5 Mini range. The orange helps parents pick out their child on a busy track, while the black parts hide the worst of the dirt. Expect the orange areas to show mud more quickly than the Black\/Red version.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 2.5 Mini\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest (roost and stone protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eEN 14021 (roost protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHDPE hard shell with padded base layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e60% HDPE, 30% EVA foam, 10% polyester\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eApprox. 450 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003e110–134 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn recesses front and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e3 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"110-134cm \/ Orange\/Black","offer_id":54033473569034,"sku":"5016100600","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-2-5-mini-kids-orange-black__3.png?v=1793445087"},{"product_id":"leatt-chest-protector-3-5-jr-kids-black-red","title":"Leatt Chest Protector 3.5 Jr – Kids – Black\/Red","description":"\u003cp\u003eThe Leatt Chest Protector 3.5 Jr brings certified impact protection to junior riders in a slim package: chest and back are both CE Level 1, and the hybrid build of hard shell and 3DF AirFit foam stays light at 995 g. In Black\/Red it has a sporty, racy look that suits young motocross and enduro riders.\u003c\/p\u003e\u003cp\u003eLeatt designed this junior version specifically for younger riders, with a multi-plate articulating design and removable plates that let it work with or without a Leatt neck brace.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChest EN 1621-3 Level 1, back EN 1621-2 Level 1\u003c\/li\u003e\n\u003cli\u003eHard shell combined with 3DF AirFit soft impact foam\u003c\/li\u003e\n\u003cli\u003e3D multi-layer, multi-plate articulating design\u003c\/li\u003e\n\u003cli\u003eVentilation slots for airflow\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear plates, BraceOn compatible\u003c\/li\u003e\n\u003cli\u003e995 g, junior size for 147–159 cm\u003c\/li\u003e\n\u003cli\u003eFFM certified and 7 protection points according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eReal Impact Protection for Kids\u003c\/h2\u003e\u003cp\u003eWhere a roost guard mainly deflects stones, the 3.5 Jr is tested as impact protection. Leatt certifies the chest to EN 1621-3 and the back to EN 1621-2, both at Level 1. The brand also lists FFM certification by the French Motorcycle Federation and a protection score of 7 points, the same score Leatt gives the adult 3.5.\u003c\/p\u003e\u003ch2\u003eBuilt to Move with a Young Rider\u003c\/h2\u003e\u003cp\u003eSeveral layers and articulated plates allow the protector to follow the body when a child stands up, sits down or leans into a corner. The hard shell is backed with 3DF AirFit foam, and Leatt's materials data lists 50% HDPE, 35% EVA and 3DF AirFit foam, 10% polyester for the straps and mesh and 5% other materials.\u003c\/p\u003e\u003ch2\u003eVentilation\u003c\/h2\u003e\u003cp\u003eVentilation slots let air pass through the plates, so young riders stay cooler during long practice sessions. Leatt describes the airflow as keeping junior riders cool all day.\u003c\/p\u003e\u003ch2\u003eNeck Brace Ready\u003c\/h2\u003e\u003cp\u003eThanks to removable front and rear plates and BraceOn compatibility, the 3.5 Jr can be worn with or without a Leatt neck brace. That gives you flexibility now and later, if your child starts using a brace.\u003c\/p\u003e\u003ch2\u003eSizing\u003c\/h2\u003e\u003cp\u003eThe protector is offered in size L\/XL, and Leatt's junior size range covers riders from 147 to 159 cm. The weight is 995 g.\u003c\/p\u003e\u003ch2\u003eWithin Leatt's Junior Range\u003c\/h2\u003e\u003cp\u003eWith 7 points, the 3.5 Jr sits above the 2.5 Hybrid Jr (5 points), which has a roost-rated chest, and below the 4.5 Hybrid Jr (12 points) with Level 2 at chest and back. It is the junior model that brings an impact-certified chest at the lowest step, which makes it a good choice for kids who are starting to ride faster tracks.\u003c\/p\u003e\u003ch2\u003eManual and Certificates\u003c\/h2\u003e\u003cp\u003eLeatt publishes the manual, the EU type certificate and the declaration of conformity for the 3.5 Jr. The protector is shipped in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is Level 1 protection, and there are no shoulder guards. The 3.5 Jr is a single junior size for 147–159 cm, so smaller children will need a Mini model instead. Leatt's protection score is a manufacturer rating.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack\/Red combines a dark, practical base with red accents that bring some race-team energy to the protector. The black base hides dirt well, while the red adds a splash of colour that matches many junior kits.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 3.5 Jr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 1, back EN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with 3DF AirFit foam, multi-plate articulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e50% HDPE, 35% EVA \/ 3DF AirFit foam, 10% polyester, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e995 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eL\/XL (junior 147–159 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn compatible, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e7 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"L\/XL \/ Black\/Red","offer_id":54033476845834,"sku":"5023051000","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-3-5-jr-kids-black-red__1.png?v=1793445119"},{"product_id":"leatt-chest-protector-3-5-jr-kids-orange-black","title":"Leatt Chest Protector 3.5 Jr – Kids – Orange\/Black","description":"\u003cp\u003eOrange\/Black makes the Leatt Chest Protector 3.5 Jr easy to spot on track, and underneath the bright colour sits genuine CE impact protection for young riders. The hybrid shell with 3DF AirFit soft foam is certified to Level 1 at chest and back while staying slim enough for kids to ride comfortably.\u003c\/p\u003e\u003cp\u003eWeighing 995 g and sized for juniors between 147 and 159 cm, it is a solid next step for children moving up from a roost guard to certified protection.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE impact rating Level 1 at chest (EN 1621-3) and back (EN 1621-2)\u003c\/li\u003e\n\u003cli\u003eHybrid hardshell and 3DF AirFit foam construction\u003c\/li\u003e\n\u003cli\u003eArticulating multi-plate, multi-layer 3D design\u003c\/li\u003e\n\u003cli\u003eVentilation slots to keep young riders cool\u003c\/li\u003e\n\u003cli\u003eFront and rear plates removable for neck brace use\u003c\/li\u003e\n\u003cli\u003eLeatt score 7 points, FFM certified per Leatt\u003c\/li\u003e\n\u003cli\u003eWeight 995 g, size L\/XL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eStepping Up from Roost Protection\u003c\/h2\u003e\u003cp\u003eKids who have outgrown a basic roost guard often need protection that is tested for impacts, not just stones. The orange 3.5 Jr meets EN 1621-3 at Level 1 for the chest and EN 1621-2 at Level 1 for the back. Leatt states that it is FFM certified and assigns it 7 points on its own protection scale.\u003c\/p\u003e\u003ch2\u003eComfort and Construction\u003c\/h2\u003e\u003cp\u003eLeatt combines a hard outer shell with 3DF AirFit foam for a blend of comfort and confidence. The 3D design is built from multiple layers and plates that articulate, so the protector moves with a child's body. The material split listed by Leatt is 50% high-density polyethylene, 35% EVA and 3DF AirFit impact foam, 10% polyester and 5% other materials.\u003c\/p\u003e\u003ch2\u003eAirflow on Hot Days\u003c\/h2\u003e\u003cp\u003eVentilation slots through the plates allow air to circulate.\u003c\/p\u003e\u003ch2\u003eNeck Brace Compatibility\u003c\/h2\u003e\u003cp\u003eThe 3.5 Jr is BraceOn compatible and has removable plates at the front and the rear. You can set it up for a Leatt neck brace or ride without one.\u003c\/p\u003e\u003ch2\u003eSize and Weight\u003c\/h2\u003e\u003cp\u003eSize L\/XL fits Leatt's junior range of 147 to 159 cm. With 995 g, it remains light enough for kids to wear through a full day of practice.\u003c\/p\u003e\u003ch2\u003eWho It Suits\u003c\/h2\u003e\u003cp\u003eThe 3.5 Jr is listed for junior motocross and enduro riding. It suits kids who have moved past the Mini sizes and are now on bigger junior bikes, where crashes come with more speed and roost alone is no longer the main concern. The slim profile means it fits under or over most junior jerseys.\u003c\/p\u003e\u003cp\u003eLeatt provides a manual, the EU type certificate and a declaration of conformity for the 3.5 Jr, and the protector ships in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 3.5 Jr is rated Level 1, the lower of the two CE levels, and protects chest and back only, without shoulder guards. The size range starts at 147 cm, so younger or smaller children are better served by a Mini protector.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eOrange\/Black is the high-visibility option: the orange stands out on the track and in the paddock, which makes it easier for parents and coaches to keep an eye on their rider. It shows dirt more than plain black, but the black areas help keep it looking tidy.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 3.5 Jr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 1, back EN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with 3DF AirFit foam, multi-plate articulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e50% HDPE, 35% EVA \/ 3DF AirFit foam, 10% polyester, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e995 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eL\/XL (junior 147–159 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn compatible, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e7 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"L\/XL \/ Orange\/Black","offer_id":54033477533962,"sku":"5023051001","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-3-5-jr-kids-orange-black__1.png?v=1793445130"},{"product_id":"leatt-chest-protector-3-5-pro-white","title":"Leatt Chest Protector 3.5 Pro – Unisex – White","description":"\u003cp\u003eIn white, the Leatt Chest Protector 3.5 Pro combines a clean, bright appearance with the shoulder coverage that separates it from the standard 3.5. Hard shell and 3DF AirFit foam work together at the chest and back, which are CE certified to Level 1, and the shoulder sections extend the protected area towards the arms.\u003c\/p\u003e\u003cp\u003eThe white 3.5 Pro is offered in S-XL, a size Leatt specifies for riders between 70 and 90 kg, and its weight starts at 1.0 kg.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChest certified to EN 1621-3 Level 1, back to EN 1621-2 Level 1\u003c\/li\u003e\n\u003cli\u003eShoulder coverage integrated into the protector\u003c\/li\u003e\n\u003cli\u003eHybrid of hard shell and soft 3DF AirFit impact foam\u003c\/li\u003e\n\u003cli\u003eSlimmer BraceOn system, removable front and rear plates\u003c\/li\u003e\n\u003cli\u003eVentilation slots for warm-weather riding\u003c\/li\u003e\n\u003cli\u003eWeight from 1.0 kg, size S-XL for 70–90 kg\u003c\/li\u003e\n\u003cli\u003eLeatt score of 10 points, FFM certified according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShoulder Cover in a Light Package\u003c\/h2\u003e\u003cp\u003eThe main reason to choose the 3.5 Pro over the 3.5 is the integrated shoulder coverage. Leatt keeps the build light, starting at 1.0 kg, and positions the white 3.5 Pro as upper-body protection for riders who want more coverage without moving to the heavier hard-shell Evo models.\u003c\/p\u003e\u003ch2\u003eHow It Is Rated\u003c\/h2\u003e\u003cp\u003eLeatt's CE line for the 3.5 Pro lists EN 1621-3 Level 1 for the chest and EN 1621-2 Level 1 for the back. The brand adds FFM certification from the French Motorcycle Federation and a total protection score of 10 points, both manufacturer statements.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cp\u003eA hard shell protects the outer surface, and 3DF AirFit soft impact foam sits behind it. For the white version, Leatt's materials data gives 50% high-density polyethylene, 35% EVA and 3DF AirFit impact foam, 10% polyester for straps and mesh and 5% other materials.\u003c\/p\u003e\u003ch2\u003eKeeping Cool\u003c\/h2\u003e\u003cp\u003eVentilation slots are placed through the protector to ensure airflow, and the white surface reflects more sunlight than a dark one.\u003c\/p\u003e\u003ch2\u003eNeck Brace Compatibility\u003c\/h2\u003e\u003cp\u003eThe 3.5 Pro uses Leatt's new, slimmer BraceOn fitment system, and both plates can be taken out. This lets you match the protector to a Leatt neck brace or ride without one.\u003c\/p\u003e\u003ch2\u003eDocuments and Packaging\u003c\/h2\u003e\u003cp\u003eLeatt publishes a user manual, an EU type certificate and a declaration of conformity for the 3.5 Pro, which is also the best place to check the exact certification details. The protector comes in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhere It Fits\u003c\/h2\u003e\u003cp\u003eIn Leatt's line-up the 3.5 Pro sits between the 3.5 (7 points) and the Level 2 models of the 4.5 family (12 points and above). For enduro and trail riders who want some shoulder cover without the weight of a full hard-shell Evo, the white 3.5 Pro is a light compromise.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe white 3.5 Pro is only available in S-XL; XXL is offered in black. Leatt describes Level 1 protection for chest, back and shoulders in its summary, yet the CE details list standards for the chest and back only, so please contact us if you need confirmation of the shoulder certification. White shows dirt quickly.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe white finish makes the 3.5 Pro stand out over a jersey and suits bright race kits. It needs a wipe after muddy rides to stay clean, but it tends to stay cooler under direct sun than black.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 3.5 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back and shoulders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 1, back EN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with 3DF AirFit soft impact foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e50% HDPE, 35% EVA \/ 3DF AirFit foam, 10% polyester, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.0 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS-XL (70–90 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eSlimmer BraceOn system, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e10 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S-XL \/ White","offer_id":54033480483082,"sku":"5021400261","price":169.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-3-5-pro-white__1.png?v=1793445159"},{"product_id":"leatt-chest-protector-3-5-white","title":"Leatt Chest Protector 3.5 – Unisex – White","description":"\u003cp\u003eA bright white shell, certified chest and back protection and a weight that starts at 750 g: the white Leatt Chest Protector 3.5 is aimed at riders who like a clean look over the jersey and want more than a roost guard. Under the shell, 3DF AirFit soft foam adds impact absorption, giving CE Level 1 at front and rear.\u003c\/p\u003e\u003cp\u003eThe white version comes in one adult size, S-XL, which Leatt specifies for riders from 70 to 90 kg.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE certified: EN 1621-3 Level 1 chest, EN 1621-2 Level 1 back\u003c\/li\u003e\n\u003cli\u003eHard shell backed by flexible 3DF AirFit foam\u003c\/li\u003e\n\u003cli\u003eSlim, lightweight build from 750 g\u003c\/li\u003e\n\u003cli\u003e3D shaping and ventilation slots\u003c\/li\u003e\n\u003cli\u003eFront and rear plates removable\u003c\/li\u003e\n\u003cli\u003eBraceOn neck brace fitment\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 7 points, FFM certified per Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSlim but Certified\u003c\/h2\u003e\u003cp\u003eLeatt designed the 3.5 for riders who want certified impact protection without bulk. The white protector is slim enough to wear comfortably under or over a jersey, yet both main zones carry a CE rating: EN 1621-3 Level 1 for the chest and EN 1621-2 Level 1 for the back.\u003c\/p\u003e\u003ch2\u003eInside the Construction\u003c\/h2\u003e\u003cp\u003eThe hard outer shell spreads and deflects, while the 3DF AirFit foam behind it absorbs energy and stays flexible as you move. According to Leatt's materials data, the white 3.5 is made from 50% HDPE, 35% EVA and 3DF AirFit impact foam, 10% polyester in the straps and mesh and 5% other materials.\u003c\/p\u003e\u003cp\u003eLeatt's 3D design keeps the plates aligned with your chest and back, which helps the protector stay in place on rough ground.\u003c\/p\u003e\u003ch2\u003eCooling\u003c\/h2\u003e\u003cp\u003eVentilation slots let air pass through the shell and foam.\u003c\/p\u003e\u003ch2\u003eWith or Without a Neck Brace\u003c\/h2\u003e\u003cp\u003eBraceOn compatibility is built in, and Leatt makes both the front and rear plates removable. That lets you set up the white 3.5 for riding with a Leatt neck brace or without one.\u003c\/p\u003e\u003ch2\u003eRatings from Leatt\u003c\/h2\u003e\u003cp\u003eLeatt lists FFM certification from the French Motorcycle Federation for the 3.5 and gives it 7 points on its total protection score, a manufacturer scale that helps place it between the lighter roost guards and the heavier hard-shell models.\u003c\/p\u003e\u003ch2\u003eRiding Use\u003c\/h2\u003e\u003cp\u003eThe 3.5 is listed for motocross, enduro and trail riding. Its slim build makes it easy to wear under an enduro jacket or a fitted jersey, and the white shell looks at home over a bright motocross top. For riders who usually wear a roost guard but want CE impact certification, it is the first step up in Leatt's adult range.\u003c\/p\u003e\u003ch2\u003ePaperwork\u003c\/h2\u003e\u003cp\u003eA manual, the EU type certificate and the declaration of conformity for the Chest Protector 3.5 are published by Leatt. The protector arrives in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe white 3.5 is available only in S-XL for 70 to 90 kg; XXL exists in black only. Level 1 is the lower of the two certification levels, and there are no shoulder guards. Riders who want shoulder cover in the same model line should look at the 3.5 Pro.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eWhite gives the 3.5 a fresh, race-day appearance and pairs especially well with light or colourful jerseys. It shows roost marks and mud more readily than black, so a quick clean after each ride keeps it looking sharp. In direct sun, a white surface usually stays cooler to the touch than a dark one.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 3.5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 1, back EN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with 3DF AirFit soft impact foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e50% HDPE, 35% EVA \/ 3DF AirFit foam, 10% polyester, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 750 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS-XL (70–90 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn compatible, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e7 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S-XL \/ White","offer_id":54033481138442,"sku":"5020004181","price":149.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-3-5-white__1.png?v=1793445167"},{"product_id":"leatt-chest-protector-3df-airfit-evo-pro-jr-kids-black","title":"Leatt Chest Protector 3DF AirFit Evo Pro Jr – Kids – Black","description":"\u003cp\u003eSoft protection, sized for kids and extended to the shoulders: the Leatt Chest Protector 3DF AirFit Evo Pro Jr uses 3DF AirFit foam instead of hard plates and covers chest, back and shoulders with CE Level 1 certification on all three zones. Leatt shapes it with a junior-specific 3D design, so it fits younger riders properly rather than being a shrunken adult protector.\u003c\/p\u003e\u003cp\u003eThe black Pro Jr starts at 727 g and has a large chest impact area, making it a comfortable option for kids who find hard-shell protectors stiff.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE impact protection: chest EN 1621-3 Level 1, back EN 1621-2 Level 1, shoulders EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eSoft-shell 3DF AirFit multi-impact foam\u003c\/li\u003e\n\u003cli\u003eLarge chest impact area\u003c\/li\u003e\n\u003cli\u003eJunior-specific 3D ergonomic fit\u003c\/li\u003e\n\u003cli\u003eBraceOn neck brace fitment system\u003c\/li\u003e\n\u003cli\u003eFrom 727 g; FFM certified and 11 protection points according to Leatt\u003c\/li\u003e\n\u003cli\u003eJunior sizing for 147–159 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSoft Foam for Young Riders\u003c\/h2\u003e\u003cp\u003e3DF AirFit is Leatt's multi-impact, energy-absorbing foam. It stays soft and comfortable in normal use, which makes a big difference for children who are reluctant to wear stiff protection. Leatt describes the foam as providing comfortable, lightweight protection with maximum ventilation.\u003c\/p\u003e\u003cp\u003eLeatt's data lists 45% nylon, 25% polyurethane, 20% EVA, 5% polyester and 5% other materials.\u003c\/p\u003e\u003ch2\u003eThree Certified Zones\u003c\/h2\u003e\u003cp\u003eUnlike several of Leatt's junior chest protectors, the Pro Jr includes certified shoulders. The chest is tested to EN 1621-3, the back to EN 1621-2 and the shoulders to EN 1621-1, each at Level 1. Leatt additionally lists FFM certification from the French Motorcycle Federation and gives the protector 11 points on its own protection score.\u003c\/p\u003e\u003ch2\u003eFit and Sizing\u003c\/h2\u003e\u003cp\u003eThe 3D design is tailored to younger riders. Leatt specifies the junior range as 147 to 159 cm body height, offered in S\/M and L\/XL. Check the fit with the jersey your child normally wears, because the soft shell sits close to the body.\u003c\/p\u003e\u003ch2\u003eVentilation\u003c\/h2\u003e\u003cp\u003eThe foam is built for airflow, and Leatt highlights maximum ventilation as one of the main benefits of the AirFit construction, useful for kids who ride through warm summer practice days.\u003c\/p\u003e\u003ch2\u003eNeck Brace Fitment\u003c\/h2\u003e\u003cp\u003eThe BraceOn system allows a seamless fit with a Leatt neck brace. Leatt also offers this design as a body protector, but this listing is the chest protector version.\u003c\/p\u003e\u003ch2\u003eWithin the Junior Range\u003c\/h2\u003e\u003cp\u003eLeatt's protection score puts the 3DF AirFit Evo Pro Jr at 11 points, above the 3.5 Jr (7 points) thanks to the certified shoulders, but below the hybrid 4.5 Jr models that reach Level 2 at chest and back. It is the soft-shell choice for kids who want shoulder coverage and comfort.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eAll three zones are Level 1, not Level 2. If Level 2 at chest and back is important to you, Leatt's 4.5 Hybrid Jr models reach that rating. As a soft-shell, the Pro Jr does not deflect roost like a hard plate. The 147–159 cm range applies to the junior sizing as a whole.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack suits a junior soft-shell protector well: it looks tidy under a race jersey, does not show mud as quickly as light colours and works with any team or club kit.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 3DF AirFit Evo Pro Jr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids, junior-specific 3D fit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back and shoulders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 1, back EN 1621-2 Level 1, shoulders EN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eSoft shell, 3DF AirFit multi-impact foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e45% nylon, 25% polyurethane, 20% EVA, 5% polyester, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 727 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL (junior 147–159 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e11 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033482154250,"sku":"5026011960","price":119.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033482187018,"sku":"5026011961","price":119.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-3df-airfit-evo-pro-jr-kids-black__2.png?v=1793445198"},{"product_id":"leatt-chest-protector-4-5-hybrid-black","title":"Leatt Chest Protector 4.5 Hybrid – Unisex – Black","description":"\u003cp\u003eHard at the front, soft at the back: the Leatt Chest Protector 4.5 Hybrid puts a hard-shell chest plate with FlexMesh Pro armour where roost and impacts hit first, and a 3DF AirFit foam back protector that forms to the shape of your body. Both zones reach CE Level 2, so the softer back does not mean a lower rating.\u003c\/p\u003e\u003cp\u003eIn black and at 1.10 kg, the 4.5 Hybrid is designed for riders who want serious certification but prefer the feel of a soft back panel against the spine on long days in the saddle.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE Level 2 at chest (EN 1621-3) and back (EN 1621-2)\u003c\/li\u003e\n\u003cli\u003eHard-shell chest plate with ventilated FlexMesh Pro impact protection\u003c\/li\u003e\n\u003cli\u003eSoft, ventilated 3DF impact foam back that conforms to your body\u003c\/li\u003e\n\u003cli\u003eFlex joints for 3D flexing and a close fit\u003c\/li\u003e\n\u003cli\u003eElastic straps for secure positioning, removable rear plate\u003c\/li\u003e\n\u003cli\u003eBraceOn system for a Leatt neck brace\u003c\/li\u003e\n\u003cli\u003e1.10 kg, ISR rated and 12 protection points according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe Hybrid Principle\u003c\/h2\u003e\u003cp\u003eLeatt splits the job between two materials. Up front, a hard shell over FlexMesh Pro handles stones and impact energy while staying ventilated. On the back, 3DF impact foam takes over: it is soft and flexible in normal use and moulds to the shape of your back, which many riders find more comfortable when sitting or leaning forward for long periods.\u003c\/p\u003e\u003cp\u003eLeatt's materials list names 55% high-density polyethylene for the hard shell, 30% EVA foam described as 3DF AirFit impact foam, 10% polyester for straps and mesh and 5% buckles, adjusters and fasteners.\u003c\/p\u003e\u003ch2\u003eRatings You Can Check\u003c\/h2\u003e\u003cp\u003eThe chest of the 4.5 Hybrid is CE certified to EN 1621-3 at Level 2, and the soft back reaches Level 2 under EN 1621-2. Beyond the CE marking, Leatt lists the protector as ISR rated and scores it at 12 points on its own protection scale.\u003c\/p\u003e\u003ch2\u003eComfort Over Long Rides\u003c\/h2\u003e\u003cp\u003eElastic straps keep the protector in place without the need to cinch it hard, and the flex joints let it move in three dimensions with your torso. Leatt calls it a lightweight hybrid design for all-day comfort, and the soft back is the main reason it feels different from a full hard-shell model.\u003c\/p\u003e\u003ch2\u003eNeck Brace Fit\u003c\/h2\u003e\u003cp\u003eThe BraceOn system gives a seamless interface for a Leatt neck brace, and the rear plate can be removed. That lets you set the 4.5 Hybrid up around the brace you already ride with.\u003c\/p\u003e\u003ch2\u003eSizes\u003c\/h2\u003e\u003cp\u003eThe 4.5 Hybrid is offered in S\/M, L\/XL and XXL. Leatt's size range spans riders from 160 to 196 cm in height.\u003c\/p\u003e\u003ch2\u003eCertificates and Packaging\u003c\/h2\u003e\u003cp\u003eLeatt publishes the EU type certificate and the declaration of conformity for the 4.5 Hybrid, so the Level 2 ratings can be checked in the original documents. The protector comes in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 4.5 Hybrid protects chest and back only; there are no shoulder guards. Unlike some hard-shell models, Leatt lists only the rear plate as removable here, not the front one. If you prefer the stiffness of a full hard shell all round, the 4.5 Evo is the closer match in the same family.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack suits the hybrid build well, because the soft back and hard front blend into one uniform look. It goes with any kit colour and hides trail dust. Like any dark protector, it absorbs some heat in direct sun when you are stationary.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 4.5 Hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest and back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard-shell FlexMesh Pro chest, 3DF AirFit soft foam back\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e55% HDPE, 30% EVA (3DF AirFit) foam, 10% polyester, 5% buckles and fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.10 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL (rider height 160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system, removable rear plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e12 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033486119178,"sku":"5026010560","price":229.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033486151946,"sku":"5026010561","price":229.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033486184714,"sku":"5026010562","price":229.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-4-5-hybrid-black__1.png?v=1793445232"},{"product_id":"leatt-chest-protector-4-5-hybrid-pro-jr-kids-black","title":"Leatt Chest Protector 4.5 Hybrid Pro Jr – Kids – Black","description":"\u003cp\u003eFor young racers who need more than chest and back cover, the Leatt Chest Protector 4.5 Hybrid Pro Jr adds certified shoulder guards to Leatt's junior hybrid layout. The result is Level 2 at chest and back, Level 1 at the shoulders and a protection score of 16 points, the highest Leatt quotes for a junior chest protector in this group.\u003c\/p\u003e\u003cp\u003eThe black Pro Jr combines a hard-shell chest plate with ventilated FlexMesh Pro and a soft 3DF foam back, and it weighs 0.92 kg, which keeps it manageable for kids on full race days.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2\u003c\/li\u003e\n\u003cli\u003eIntegrated shoulder guards certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eHard-shell FlexMesh Pro chest with soft 3DF AirFit back\u003c\/li\u003e\n\u003cli\u003eFlex joints for 3D movement and close fit\u003c\/li\u003e\n\u003cli\u003eAdjustable straps for secure positioning\u003c\/li\u003e\n\u003cli\u003eBraceOn system for Leatt neck braces\u003c\/li\u003e\n\u003cli\u003e0.92 kg, 16 protection points according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eShoulders Included\u003c\/h2\u003e\u003cp\u003eThe difference to the regular 4.5 Hybrid Jr is the shoulder protection. Leatt certifies the shoulder guards to EN 1621-1 at Level 1, while the chest (EN 1621-3) and back (EN 1621-2) keep their Level 2 ratings. Leatt describes the integrated shoulder protection as a confidence boost for aggressive riding, which suits kids who already race or ride fast tracks.\u003c\/p\u003e\u003ch2\u003eMaterials and Build\u003c\/h2\u003e\u003cp\u003eA hard shell over light, ventilated FlexMesh Pro impact protection covers the chest. On the back, soft and ventilated 3DF impact foam forms to the shape of the body. According to Leatt's material data, the protector contains 55% HDPE, 30% EVA 3DF AirFit impact foam, 10% polyester for straps and mesh and 5% buckles, adjusters and fasteners.\u003c\/p\u003e\u003cp\u003eFlex joints and soft foams allow the protector to flex in three dimensions, so the added shoulder guards do not lock the rider into a stiff shell.\u003c\/p\u003e\u003ch2\u003eLeatt's Own Rating\u003c\/h2\u003e\u003cp\u003eLeatt gives the 4.5 Hybrid Pro Jr 16 points on its total protection score. The score is a manufacturer rating that helps you compare Leatt's junior models: the same hybrid without shoulder guards is rated at 12 points.\u003c\/p\u003e\u003ch2\u003eFit and Sizing\u003c\/h2\u003e\u003cp\u003eAdjustable straps hold everything in place, and the Pro Jr is available in S\/M and L\/XL. Leatt does not list body heights for these two sizes, so we recommend a fitting with the jersey and neck brace your child will ride in.\u003c\/p\u003e\u003ch2\u003eNeck Brace Integration\u003c\/h2\u003e\u003cp\u003eThe BraceOn system provides a seamless neck brace fit for Leatt braces, so the shoulder guards and brace work together rather than competing for space.\u003c\/p\u003e\u003ch2\u003ePaperwork\u003c\/h2\u003e\u003cp\u003eThe manual, the EU type certificate and the declaration of conformity for the 4.5 Hybrid Pro Jr are available from Leatt, and the protector arrives in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe shoulders are certified at Level 1, not Level 2. With 0.92 kg the Pro Jr is heavier than the 740 g 4.5 Hybrid Jr without shoulder guards, which some younger riders may notice. Leatt names no height range for S\/M and L\/XL.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack gives the Pro Jr a serious race look and works with every team kit. On a child's protector that sees plenty of mud and roost, the dark finish keeps it looking presentable longer between cleanings.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 4.5 Hybrid Pro Jr\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eKids\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back and shoulders\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2, shoulders EN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard-shell FlexMesh Pro chest, 3DF AirFit soft foam back, shoulder guards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e55% HDPE, 30% EVA (3DF AirFit) foam, 10% polyester, 5% buckles and fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e0.92 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e16 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033487331594,"sku":"5026011860","price":159.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033487364362,"sku":"5026011861","price":159.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-4-5-hybrid-pro-jr-kids-black__1.png?v=1793445258"},{"product_id":"leatt-chest-protector-4-5-pro-evo-black","title":"Leatt Chest Protector 4.5 Pro Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Chest Protector 4.5 Pro Evo is the race-ready hard-shell option that still includes shoulder guards: CE Level 2 at chest and back, Level 1 at the shoulders, plus flank panels for ribs and sides. Leatt pairs the hard shell with FlexMesh Pro armour so airflow stays high while the plates articulate with your body.\u003c\/p\u003e\u003cp\u003eThis black version suits motocross and enduro riders who push hard, crash occasionally and want coverage that goes beyond the chest without stepping up to the heaviest model in the range.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eChest EN 1621-3 Level 2 and back EN 1621-2 Level 2\u003c\/li\u003e\n\u003cli\u003eShoulder guards certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eHard shell with FlexMesh Pro mesh armour and multi-layer, multi-plate articulation\u003c\/li\u003e\n\u003cli\u003eExtended back plate and flank panels for ribs and sides\u003c\/li\u003e\n\u003cli\u003e30% lighter and 50% more ventilated than the previous model, according to Leatt\u003c\/li\u003e\n\u003cli\u003eRemovable front and rear plates, BraceOn neck brace system\u003c\/li\u003e\n\u003cli\u003e1.70 kg, protection score of 17 points per Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eVentilation Comes First\u003c\/h2\u003e\u003cp\u003eThe 4.5 Pro Evo uses FlexMesh Pro, a mesh-type armour that lets air pass through large parts of the protector. Leatt says this generation moves 50% more air and weighs 30% less than its predecessor, which makes the 4.5 Pro Evo easier to live with on long motos and hot summer rides.\u003c\/p\u003e\u003ch2\u003eCertified Impact Protection\u003c\/h2\u003e\u003cp\u003eLeatt has the chest tested to EN 1621-3 and the back to EN 1621-2, both reaching Level 2, while the shoulder guards meet EN 1621-1 at Level 1. These are impact protection ratings, which means the plates are tested for energy absorption, not only for deflecting roost.\u003c\/p\u003e\u003cp\u003eThe brand also lists FFM certification and an ISR rating for the 4.5 Pro Evo, and scores it at 17 points on its own protection scale. These figures come from Leatt.\u003c\/p\u003e\u003ch2\u003ePlates, Joints and Coverage\u003c\/h2\u003e\u003cp\u003eA multi-layer, multi-plate articulating design and Leatt's 3D shaping give the protector a close fit that follows the torso when you move. The back plate is extended for more spine coverage, and flank panels on both sides protect the ribs. According to Leatt's materials data, the protector is made mostly from high-density polyethylene (55%) with 30% EVA impact padding, 10% polyester for straps and mesh and 5% buckles and adjusters.\u003c\/p\u003e\u003ch2\u003eNeck Brace Set-Up\u003c\/h2\u003e\u003cp\u003eLeatt's BraceOn system is built into the front and back, and both plates can be removed. That gives you two ways to run a Leatt neck brace: with the brace sitting in the BraceOn recesses, or with the relevant plate taken out.\u003c\/p\u003e\u003ch2\u003eAdjustment and Sizing\u003c\/h2\u003e\u003cp\u003eAdjustable over-the-shoulder straps let you set the plate height for a personalised fit. Sizes are S\/M, L\/XL and XXL, covering riders from 160 to 196 cm, and the protector weighs 1.70 kg.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe shoulders are certified at Level 1, so only chest and back carry the higher Level 2 rating. Compared with the 5.5 Pro Evo, Leatt rates the 4.5 Pro Evo two points lower on its protection score. The 30% and 50% figures compare it with Leatt's previous 4.5 Pro, not with other brands.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe 4.5 Pro Evo comes in black, a colour that keeps the hard shell understated and works with any jersey design. Black hides dust and roost marks well between washes, though a dark shell will feel warm in the paddock on sunny days, which is where the open mesh helps.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 4.5 Pro Evo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back, shoulders, ribs and sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2, shoulders EN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with FlexMesh Pro, multi-layer multi-plate design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e55% HDPE, 30% EVA foam, 10% polyester, 5% buckles and adjusters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003e1.70 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL (rider height 160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e17 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033490084106,"sku":"5025202360","price":199.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033490116874,"sku":"5025202361","price":199.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033490149642,"sku":"5025202362","price":199.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-4-5-pro-evo-black__2.png?v=1793445274"},{"product_id":"leatt-chest-protector-6-5-pro-grey","title":"Leatt Chest Protector 6.5 Pro – Unisex – Grey","description":"\u003cp\u003eWith 20 points, the Leatt Chest Protector 6.5 Pro carries the highest protection score Leatt gives any model in this chest protector group. It joins a hard shell with ventilated 3DF AirFit impact foam and covers the chest, back, shoulders and sides, aimed at riders who face the toughest conditions and want as much upper-body cover as possible.\u003c\/p\u003e\u003cp\u003eThe grey colourway gives this protector a technical, neutral look that sits between bright white and full black, and it pairs easily with most motocross and enduro kits.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE impact protection: chest EN 1621-3 Level 2, back EN 1621-2 Level 2, shoulders EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eHard shell backed by 3DF AirFit ventilated soft impact foam\u003c\/li\u003e\n\u003cli\u003eExtended side protection and articulated multi-plate 3D design\u003c\/li\u003e\n\u003cli\u003eMesh base layer against the body\u003c\/li\u003e\n\u003cli\u003eAdjustable shoulder straps and removable front and rear plates\u003c\/li\u003e\n\u003cli\u003eBraceOn system for over- and under-shirt Leatt neck brace fit\u003c\/li\u003e\n\u003cli\u003eFrom 1.99 kg; FFM certified and ISR rated according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHard Shell Meets 3DF AirFit\u003c\/h2\u003e\u003cp\u003eMost hard-shell chest protectors rely on the plastic shell plus a thin liner. The 6.5 Pro instead reinforces the shell with 3DF AirFit, Leatt's soft impact foam, which Leatt describes as giving exceptional impact absorption. A mesh base layer sits closest to your body.\u003c\/p\u003e\u003cp\u003eLeatt's material breakdown lists 55% high-density polyethylene, 30% EVA impact padding, 10% polyester for straps and mesh and 5% buckles, adjusters and fasteners.\u003c\/p\u003e\u003ch2\u003eProtection Ratings\u003c\/h2\u003e\u003cp\u003eThe chest is certified to EN 1621-3 Level 2 and the back to EN 1621-2 Level 2, the higher of the two levels in these standards. The shoulder guards are certified to EN 1621-1 Level 1.\u003c\/p\u003e\u003cp\u003eLeatt adds FFM certification, an ISR rating and a total protection score of 20 points, which are manufacturer references used to rank its own range.\u003c\/p\u003e\u003ch2\u003eMovement and Coverage\u003c\/h2\u003e\u003cp\u003eThe articulated multi-plate layout and 3D shaping allow you to move freely while extended side protection reaches around the ribs. According to Leatt, the goal is maximum coverage without restricting movement on the bike.\u003c\/p\u003e\u003ch2\u003eAirflow\u003c\/h2\u003e\u003cp\u003eVentilated construction and the perforated 3DF AirFit foam let air move through the protector. On the grey 6.5 Pro this matters, because the combination of shell and foam is the heaviest build in the group.\u003c\/p\u003e\u003ch2\u003eNeck Brace and Sizing\u003c\/h2\u003e\u003cp\u003eThe BraceOn system accepts a Leatt neck brace worn over or under the shirt, and both the front and rear plates are removable. Adjustable shoulder straps fine-tune the fit. Sizes S\/M, L\/XL and XXL cover riders from 160 to 196 cm.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is a heavy protector, starting at 1.99 kg, and it feels more substantial than a light roost guard. The shoulder guards are Level 1, so the Level 2 rating covers the chest and back. The 20-point score is Leatt's own scale and helps compare Leatt models, not protectors from other brands.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eGrey is a practical middle ground: it hides light dust better than white and looks less severe than black, while still giving the 6.5 Pro a technical appearance. It combines well with both dark and bright jerseys, so you are not tied to one kit colour.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eChest Protector 6.5 Pro\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFit\u003c\/th\u003e\n\u003ctd\u003eUnisex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eProtection zones\u003c\/th\u003e\n\u003ctd\u003eChest, back, shoulders and sides\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCE certification\u003c\/th\u003e\n\u003ctd\u003eChest EN 1621-3 Level 2, back EN 1621-2 Level 2, shoulders EN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eHard shell with 3DF AirFit impact foam, mesh base layer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003e55% HDPE, 30% EVA foam, 10% polyester, 5% buckles and fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.99 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL (rider height 160–196 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace\u003c\/th\u003e\n\u003ctd\u003eBraceOn system, removable front and rear plates\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eLeatt protection score\u003c\/th\u003e\n\u003ctd\u003e20 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Grey","offer_id":54033495851274,"sku":"5021400180","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Grey","offer_id":54033495884042,"sku":"5021400181","price":299.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Grey","offer_id":54033495916810,"sku":"5021400182","price":299.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-chest-protector-6-5-pro-grey__1.png?v=1793445294"},{"product_id":"leatt-elbow-guard-3df-5-0-evo-black","title":"Leatt Elbow Guard 3DF 5.0 Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Elbow Guard 3DF 5.0 Evo is a soft, light elbow protector for riders who find hard-cap guards stiff under a jersey. At 274 g per pair, according to Leatt, it is one of the lightest ways to add certified elbow protection: the 3DF AirFit foam is tested to EN 1621-1 Level 1.\u003c\/p\u003e\u003cp\u003eLeatt describes it as probably the most comfortable forearm protection you can wear. The reasons are practical: a pre-curved shape, 4-way stretch fabric over the elbow and a strap system that keeps the pad where it belongs without squeezing the arm.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE certified to EN 1621-1 Level 1 for the elbow\u003c\/li\u003e\n\u003cli\u003eVentilated 3DF AirFit impact foam stays soft while riding\u003c\/li\u003e\n\u003cli\u003eDeflexion outer material for durability without bulk\u003c\/li\u003e\n\u003cli\u003ePre-curved ergonomic shape for a natural arm position\u003c\/li\u003e\n\u003cli\u003eAnti-slip forearm strap and silicone bicep lining\u003c\/li\u003e\n\u003cli\u003e4-way stretch material across the elbow\u003c\/li\u003e\n\u003cli\u003e274 g per pair, Leatt protection score of 11 points (manufacturer data)\u003c\/li\u003e\n\u003cli\u003eFive single sizes from S to XXL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eThe elbow area is CE tested and certified to EN 1621-1, the standard for limb protectors, at Level 1. The 4-way stretch fabric across the joint is part of the certified build, so the protective zone itself can stretch with your arm.\u003c\/p\u003e\u003cp\u003eOn Leatt's own scale the guard scores 11 points. That rating is the manufacturer's comparison tool across its range and not a value from the CE test. For a Level 2 elbow guard in the same family, look at the Leatt 3DF 6.0 Evo.\u003c\/p\u003e\u003ch2\u003eMaterials and construction\u003c\/h2\u003e\u003cp\u003e3DF AirFit foam forms the impact layer. It is soft and pliable while you ride and is ventilated. Over it, Deflexion adds an outer surface that Leatt calls ultra-light and ultra-durable, intended to cope with crashes and abrasion without making the guard thicker.\u003c\/p\u003e\u003cp\u003eLeatt's material breakdown lists 40% EVA foam, 30% polyester for the MoistureCool and AirMesh fabrics, 15% Deflexion shell in a TPU blend, 10% nylon for straps and reinforcement and 5% silicone for the bicep grippers.\u003c\/p\u003e\u003ch2\u003eFit and retention\u003c\/h2\u003e\u003cp\u003eElbow guards tend to slide down when the arm works hard, and this is where the 3DF 5.0 Evo puts its effort. An anti-slip strap around the forearm and a silicone lining at the bicep grip the skin, while the pre-curved shape matches the bent arm of the attack position.\u003c\/p\u003e\u003cp\u003eSizing is single: S, M, L, XL and XXL. Choose the size that sits snug on the upper arm without cutting in, because the silicone lining needs contact to hold.\u003c\/p\u003e\u003ch2\u003eVentilation\u003c\/h2\u003e\u003cp\u003eThe impact foam is ventilated and the fabrics are moisture-wicking, so sweat can leave rather than collect under the pad. Combined with the low weight this makes the guard easy to forget on a long, warm ride.\u003c\/p\u003e\u003ch2\u003eRiding use and packaging\u003c\/h2\u003e\u003cp\u003eThe guard is aimed at motocross, enduro and trail riding, worn under the jersey. Leatt ships it in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is a soft protector without a hard cap, certified at Level 1. It cushions impacts but will not slide on the ground the way a hard shell does. It protects the elbow and forearm area only; shoulder or upper-arm protection is not part of it. If you need the higher Level 2 class, choose the 3DF 6.0 Evo instead.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack keeps the slim profile of the 3DF 5.0 Evo invisible under thin summer jerseys and light colours alike. The dark Deflexion surface also hides the grey abrasion marks that soft guards collect from bars and ground contact.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eElbow guard (soft impact protection)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (elbow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e11 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact material\u003c\/td\u003e\n\u003ctd\u003e3DF AirFit impact foam, ventilated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter material\u003c\/td\u003e\n\u003ctd\u003eDeflexion\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e40% EVA foam, 30% polyester, 15% Deflexion shell (TPU blend), 10% nylon, 5% silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention\u003c\/td\u003e\n\u003ctd\u003eAnti-slip forearm strap, silicone bicep lining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e274 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033498308874,"sku":"5025202600","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033498341642,"sku":"5025202601","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033498374410,"sku":"5025202602","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033498407178,"sku":"5025202603","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033498439946,"sku":"5025202604","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-elbow-guard-3df-5-0-evo-black__1.png?v=1793445340"},{"product_id":"leatt-elbow-guard-3df-6-0-evo-black","title":"Leatt Elbow Guard 3DF 6.0 Evo – Unisex – Black","description":"\u003cp\u003eWith the Elbow Guard 3DF 6.0 Evo, Leatt moves its soft elbow protection up to Level 2. The guard is certified to EN 1621-1 at the higher performance class, but it keeps a low profile and stays at 320 g per pair according to Leatt, so it still fits under a race jersey.\u003c\/p\u003e\u003cp\u003eLeatt builds it for the toughest lines: low-profile 3DF AirFit foam absorbs the hit, Deflexion protects the outside, and anti-slip forearm straps with a silicone bicep lining keep the guard on the joint when the arms are working.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE certified to EN 1621-1 Level 2 for the elbow\u003c\/li\u003e\n\u003cli\u003eLow-profile 3DF AirFit foam for higher-impact protection without bulk\u003c\/li\u003e\n\u003cli\u003eDeflexion abrasion-resistant outer layer\u003c\/li\u003e\n\u003cli\u003ePre-curved ergonomic shape\u003c\/li\u003e\n\u003cli\u003eAnti-slip forearm straps and silicone bicep lining\u003c\/li\u003e\n\u003cli\u003eVentilated construction for demanding rides\u003c\/li\u003e\n\u003cli\u003e320 g per pair, Leatt protection score of 15 points (manufacturer data)\u003c\/li\u003e\n\u003cli\u003eFive single sizes from S to XXL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eEN 1621-1 distinguishes two levels for elbow and knee protectors. The 6.0 Evo is certified at Level 2, the stricter class, which allows less transmitted force in the standard impact test than Level 1. For riders moving up from a soft Level 1 guard, this is the main step.\u003c\/p\u003e\u003cp\u003eLeatt gives it 15 points on its own protection score. Like all Leatt scores this is a manufacturer rating, but it places the 6.0 Evo above the 3DF 5.0 Evo with 11 points within Leatt's system.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cp\u003eThe impact layer is a low-profile version of Leatt's 3DF AirFit soft foam, ventilated and flexible while riding. Deflexion forms the outer material, which Leatt describes as abrasion resistant and intended to improve durability in crashes.\u003c\/p\u003e\u003cp\u003eLeatt's material list names 40% EVA foam, 30% polyester for MoistureCool and AirMesh fabrics, 15% Deflexion shell in a TPU blend, 10% nylon for straps and reinforcements and 5% silicone for the bicep grippers.\u003c\/p\u003e\u003ch2\u003eRetention and fit\u003c\/h2\u003e\u003cp\u003eAnti-slip straps around the forearm and a silicone lining on the bicep work together so the guard does not slide off the point of the elbow. The pre-curved shape follows a bent arm, which helps it stay in place in the attack position.\u003c\/p\u003e\u003cp\u003eFive single sizes are offered, S to XXL. A snug fit on the upper arm matters, since the silicone needs skin contact to grip.\u003c\/p\u003e\u003ch2\u003eVentilation\u003c\/h2\u003e\u003cp\u003eThe foam is ventilated and the fabrics wick moisture away, which keeps the step up to Level 2 from becoming a step up in heat.\u003c\/p\u003e\u003ch2\u003eWhere it fits in the range\u003c\/h2\u003e\u003cp\u003eWithin Leatt's elbow line, the 6.0 Evo sits above the soft 3DF 5.0 Evo by certification level and protection score. It is meant for motocross, enduro and trail riders who want the higher impact class without a bulky shell. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eLeatt's product page describes soft 3DF foam and a Deflexion outer layer, but no rigid hard cap, so do not expect the sliding behaviour of a hard-shell guard. The 6.0 Evo covers the elbow and forearm area; upper arm and shoulder are not protected.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eIn black, the low-profile 6.0 Evo stays hidden even under tight jerseys. Black is also forgiving with the scrapes a guard collects from bar pads and ground contact, so it keeps looking tidy longer.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eLow-profile elbow guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 2 (elbow)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e15 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact material\u003c\/td\u003e\n\u003ctd\u003eLow-profile 3DF AirFit soft impact foam, ventilated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter material\u003c\/td\u003e\n\u003ctd\u003eDeflexion, abrasion resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e40% EVA foam, 30% polyester, 15% Deflexion shell (TPU blend), 10% nylon, 5% silicone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention\u003c\/td\u003e\n\u003ctd\u003eAnti-slip forearm straps, silicone bicep lining\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e320 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033499750666,"sku":"5026060100","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033499783434,"sku":"5026060101","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033499816202,"sku":"5026060102","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033499848970,"sku":"5026060103","price":99.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033499881738,"sku":"5026060104","price":99.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-elbow-guard-3df-6-0-evo-black__1.png?v=1793445368"},{"product_id":"leatt-fusion-vest-2-0-jr-kids-black","title":"Leatt Fusion vest 2.0 Jr – Kids – Black","description":"\u003cp\u003eGetting a young rider fully protected should be quick and simple. The Leatt Fusion Vest 2.0 Jr makes it so by building neck, chest, back, flank and shoulder protection into a single vest. One piece goes on, and the most important zones of the upper body are covered, including a neck brace.\u003c\/p\u003e\u003cp\u003eLeatt calls the Fusion Vest the easiest way to protect young riders. It needs no tools for adjustment, uses soft, ventilated 3DF AirFit foam for torso and shoulders and is cut in a 3D shape for all-round comfort. This black version keeps the look understated, so it suits any junior kit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eNeck brace, chest, back, flank and shoulder protection in one vest\u003c\/li\u003e\n\u003cli\u003eChest EN 1621-3 Level 1, back EN 1621-2 Level 1, shoulders EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eSoft, ventilated 3DF AirFit impact foam\u003c\/li\u003e\n\u003cli\u003eNeck brace structure of fiberglass-reinforced polyamide resin\u003c\/li\u003e\n\u003cli\u003eEngineered fracture point on the rear thoracic strut\u003c\/li\u003e\n\u003cli\u003eNo-tool adjustment and number plate clip-in function\u003c\/li\u003e\n\u003cli\u003eISR rated, junior sizes for 105 to 165 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eNeck Brace and Body Armour Combined\u003c\/h2\u003e\u003cp\u003eAt the top of the vest sits an integrated neck brace. Its structure is made of fiberglass-reinforced polyamide resin, and the rear thoracic strut has an engineered fracture point designed to snap off in an emergency. Below it, the vest carries CE-certified impact protection for chest, back and shoulders, plus flank protection along the sides.\u003c\/p\u003e\u003cp\u003eLeatt cites an independent moto study by Action Sports EMS, according to which the Fusion Vest helps reduce critical cervical spine injuries by up to 89 % and the risk of collarbone injuries by up to 45 %. These are manufacturer statements based on that study.\u003c\/p\u003e\u003ch2\u003eCertification\u003c\/h2\u003e\u003cp\u003eThe impact zones are CE-tested and certified at Level 1: chest to EN 1621-3, back to EN 1621-2 and shoulders to EN 1621-1. The Fusion Vest 2.0 Jr is also ISR rated, and Leatt publishes an EU Declaration of Conformity and a CE certificate for it.\u003c\/p\u003e\u003ch2\u003eSizing for Growing Riders\u003c\/h2\u003e\u003cp\u003eLeatt offers three junior sizes, S\/M, L\/XL and XXL, covering riders from 105 to 165 cm. The 3D design and soft foam make the vest comfortable to wear, and because adjustment works without tools, it is quick to put on and take off between sessions. Leatt lists the weight from 1.38 kg.\u003c\/p\u003e\u003ch2\u003eComfort and Details\u003c\/h2\u003e\u003cp\u003e3DF AirFit is Leatt's soft, ventilated impact foam. It keeps young riders comfortable throughout the ride and lies close to the body under the jersey. A number plate clip-in function rounds off the vest. It ships in plastic-free packaging.\u003c\/p\u003e\u003cp\u003eTwo further details come from Leatt's product data: a collarbone cut-out that takes pressure off one of the most fragile bones in the body, and a side-entry design, so the chest protection runs across the front without a gap.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe Fusion Vest covers chest, back, shoulders, flanks and neck, but not elbows or knees; add separate junior guards for those. All impact zones are certified at Level 1. Leatt's web page states the weight as \"from 1.38g\", which we read as 1.38 kg; the older Leatt product data gives 1.5 kg. Make sure the size matches your child's height, since a neck brace only works properly when it sits correctly.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black Fusion Vest pairs a black neck brace and plates with white Leatt logos and red-and-white buckles on the side straps, according to Leatt's product images. It is the discreet choice that goes with any jersey and does not show every scuff from a fall.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConcept\u003c\/th\u003e\n\u003ctd\u003eNeck brace with chest, back, shoulder and flank protection in one vest\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact material\u003c\/th\u003e\n\u003ctd\u003e3DF AirFit foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace structure\u003c\/th\u003e\n\u003ctd\u003eFiberglass-reinforced polyamide resin, rear thoracic strut with fracture point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtras\u003c\/th\u003e\n\u003ctd\u003eNumber plate clip-in function, no-tool adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eJunior S\/M, L\/XL, XXL (105–165 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.38 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, ISR rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033503224074,"sku":"1018010001","price":289.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033503256842,"sku":"1018010002","price":289.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033503289610,"sku":"1018010003","price":289.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-fusion-vest-2-0-jr-kids-black__1.png?v=1793445412"},{"product_id":"leatt-fusion-vest-2-0-jr-kids-orange","title":"Leatt Fusion vest 2.0 Jr – Kids – Orange","description":"\u003cp\u003eBright orange plates and an orange neck brace make this Leatt Fusion Vest 2.0 Jr easy to pick out on a crowded practice track, which helps when you want to keep an eye on your child. Under the colour sits Leatt's all-in-one junior protector: neck brace, chest, back, shoulder and flank protection in one vest.\u003c\/p\u003e\u003cp\u003eBecause everything is combined, a child pulls on one piece instead of fiddling with a separate brace and body armour. No tools are needed for adjustment, and soft 3DF AirFit foam keeps the torso and shoulders comfortable. Leatt describes it as the easiest way to give young riders complete upper-body protection.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eAll-in-one vest: integrated neck brace plus upper-body armour\u003c\/li\u003e\n\u003cli\u003eCE Level 1 for chest (EN 1621-3), back (EN 1621-2) and shoulders (EN 1621-1)\u003c\/li\u003e\n\u003cli\u003eFlank protection along the sides\u003c\/li\u003e\n\u003cli\u003eFiberglass-reinforced polyamide neck brace structure\u003c\/li\u003e\n\u003cli\u003eRear thoracic strut with an engineered emergency fracture point\u003c\/li\u003e\n\u003cli\u003eVentilated 3DF AirFit foam and no-tool adjustment\u003c\/li\u003e\n\u003cli\u003eThree junior sizes for 105 to 165 cm, ISR rated\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eOne Vest, Five Zones\u003c\/h2\u003e\u003cp\u003eThe Fusion Vest 2.0 Jr protects neck, chest, back, flanks and shoulders. Chest, back and shoulder pads are CE-tested and certified at Level 1, to EN 1621-3, EN 1621-2 and EN 1621-1 respectively. The vest is ISR rated, and Leatt provides a CE certificate and an EU Declaration of Conformity.\u003c\/p\u003e\u003ch2\u003eThe Integrated Neck Brace\u003c\/h2\u003e\u003cp\u003eThe neck brace is built from fiberglass-reinforced polyamide resin. On the rear thoracic strut, Leatt has engineered a fracture point that snaps off in an emergency. According to Leatt, an independent moto study by Action Sports EMS found that the vest can help reduce critical cervical spine injuries by up to 89 % and the risk of collarbone injuries by up to 45 %; we pass these figures on as the manufacturer's statement.\u003c\/p\u003e\u003ch2\u003eFit and Handling\u003c\/h2\u003e\u003cp\u003eThree junior sizes, S\/M, L\/XL and XXL, cover riders from 105 to 165 cm. The 3D design gives a good fit, and since no tools are needed for adjustment, getting ready for the next session takes moments. A number plate clip-in function is built in. Leatt quotes a weight from 1.38 kg.\u003c\/p\u003e\u003ch2\u003eFoam and Comfort\u003c\/h2\u003e\u003cp\u003eFor the torso and shoulders Leatt uses 3DF AirFit, a soft, ventilated impact foam that keeps young riders comfortable from the first lap to the last. The vest is shipped in plastic-free packaging.\u003c\/p\u003e\u003cp\u003eAccording to Leatt's data sheet, the vest is entered from the side, which leaves the chest panel closed at the front, and the brace has a cut-out above the collarbone to reduce pressure on it.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eElbows and knees are not part of the Fusion Vest, so plan separate junior guards. The impact zones are certified at Level 1. The neck brace can only do its job if the size fits, so check your child's height against the size range before ordering.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eOrange is the visible option. On Leatt's images, the neck brace, chest plates and shoulder cap trims are bright orange against a black vest body, with white buckles at the sides. It stands out on the track and in photos, and it matches orange bikes and kits well. Orange plates will show scuffs from roost sooner than black ones.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eConcept\u003c\/th\u003e\n\u003ctd\u003eNeck brace with chest, back, shoulder and flank protection in one vest\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eChest\u003c\/th\u003e\n\u003ctd\u003eEN 1621-3 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBack\u003c\/th\u003e\n\u003ctd\u003eEN 1621-2 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eShoulders\u003c\/th\u003e\n\u003ctd\u003eEN 1621-1 Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eImpact material\u003c\/th\u003e\n\u003ctd\u003e3DF AirFit foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eNeck brace structure\u003c\/th\u003e\n\u003ctd\u003eFiberglass-reinforced polyamide resin, rear thoracic strut with fracture point\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eExtras\u003c\/th\u003e\n\u003ctd\u003eNumber plate clip-in function, no-tool adjustment\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSizes\u003c\/th\u003e\n\u003ctd\u003eJunior S\/M, L\/XL, XXL (105–165 cm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eWeight\u003c\/th\u003e\n\u003ctd\u003eFrom 1.38 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApprovals\u003c\/th\u003e\n\u003ctd\u003eCE, ISR rated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Orange","offer_id":54033503781130,"sku":"1018010021","price":289.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Orange","offer_id":54033503813898,"sku":"1018010022","price":289.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Orange","offer_id":54033503846666,"sku":"1018010023","price":289.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-fusion-vest-2-0-jr-kids-orange__1.png?v=1793445422"},{"product_id":"leatt-impact-shorts-3df-5-0-black","title":"Leatt Impact Shorts 3DF 5.0 – Unisex – Black","description":"\u003cp\u003eThe Leatt Impact Shorts 3DF 5.0 are positioned by Leatt as maximum impact protection without compromising comfort. They are a close-fitting base layer worn under riding pants, with protection concentrated on the hips and the surrounding area.\u003c\/p\u003e\n\u003cp\u003eAt the hips sits ventilated 3DF AirFit impact foam, CE certified to EN 1621-1 at Level 1. Leatt adds padding on the upper hip and on the thighs for extra coverage, and rates the complete shorts with a total Leatt Protection Score of 17 points, a figure from Leatt's own rating system.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified hip protection to EN 1621-1, Level 1\u003c\/li\u003e\n\u003cli\u003eAdditional padding on the upper hip and thighs\u003c\/li\u003e\n\u003cli\u003eSoft, ventilated 3DF AirFit impact foam for comfort on long rides\u003c\/li\u003e\n\u003cli\u003eAnti-odour MoistureCool and AirMesh fabrics\u003c\/li\u003e\n\u003cli\u003eWide stretch waistband for a secure hold\u003c\/li\u003e\n\u003cli\u003eSilicone printed elastic leg cuffs keep the legs from riding up\u003c\/li\u003e\n\u003cli\u003ePre-shaped ergonomic 3D fit\u003c\/li\u003e\n\u003cli\u003eTotal Leatt Protection Score of 17 points (manufacturer rating)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProtection \u0026amp; certification\u003c\/h2\u003e\n\u003cp\u003eThe hip protectors are CE tested and certified as impact protection to EN 1621-1, Level 1, the European standard for limb protectors. The extra pads at the upper hip and the thigh broaden the protected area; Leatt lists the CE certification for the hip. The Protection Score of 17 points is Leatt's in-house way of comparing the coverage and protection of its products and is not part of the EN standard.\u003c\/p\u003e\n\u003ch2\u003eComfort \u0026amp; climate\u003c\/h2\u003e\n\u003cp\u003eMoistureCool and AirMesh fabrics are designed to keep you cool during demanding rides and, being anti-odour, to stay fresh. The 3DF AirFit foam itself is ventilated and soft, which is why Leatt pitches these shorts at long days on the bike rather than short laps.\u003c\/p\u003e\n\u003ch2\u003eFit \u0026amp; sizes\u003c\/h2\u003e\n\u003cp\u003eThe impact shorts come in S, M, L, XL and XXL. A wide, stretchy waistband and silicone-printed elastic leg cuffs keep them in place, and the pre-shaped 3D cut follows the body so the protectors stay where they belong without restricting movement. Leatt does not provide body measurements in the sources available to us; if you are between sizes, contact us and we will help you choose.\u003c\/p\u003e\n\u003ch2\u003eMaterial\u003c\/h2\u003e\n\u003cp\u003eLeatt lists the composition as 66 % polyurethane, 17 % polyamide (nylon), 13 % polyester and 4 % other fibres such as elastic and silicone. The shorts weigh 520 g according to Leatt. Plastic-free packaging completes the package.\u003c\/p\u003e\n\u003ch2\u003eWhere to wear them\u003c\/h2\u003e\n\u003cp\u003eLeatt's product data lists the 5.0 shorts for MTB as well as for motocross, enduro and downhill. Because they are a compression layer, they can be combined with whatever riding pants you use in each discipline, and the anti-slip leg cuffs keep them from creeping up whether you are seated or standing.\u003c\/p\u003e\n\u003ch2\u003eConstruction details\u003c\/h2\u003e\n\u003cp\u003eAccording to Leatt, the compression MoistureCool fabric is joined with flatlock seams, which lie flat against the skin. The breathable mesh panels and the wide elastic waistband complete a build that Leatt describes as durable and flexible enough for aggressive riding.\u003c\/p\u003e\n\u003ch2\u003eWhat you should know\u003c\/h2\u003e\n\u003cp\u003eThe CE certification covers the hip protectors at Level 1, the base level of EN 1621-1; the upper hip and thigh pads are additional padding. The shorts are an under-layer and do not replace abrasion-resistant riding pants. Leatt supplies a manual and the CE documents for the 5.0 shorts; please read the manual before first use.\u003c\/p\u003e\n\u003ch2\u003eColour\u003c\/h2\u003e\n\u003cp\u003eBlack is the practical colour for a base layer that nobody sees while you ride: it stays plain under any riding pants and keeps dust and sweat marks inconspicuous between washes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eImpact shorts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eHip: EN 1621-1, Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdditional padding\u003c\/td\u003e\n\u003ctd\u003eUpper hip and thigh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt Protection Score\u003c\/td\u003e\n\u003ctd\u003e17 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact foam\u003c\/td\u003e\n\u003ctd\u003e3DF AirFit, ventilated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFabrics\u003c\/td\u003e\n\u003ctd\u003eMoistureCool and AirMesh, anti-odour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e66 % polyurethane, 17 % polyamide, 13 % polyester, 4 % other fibres (elastic, silicone)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (manufacturer)\u003c\/td\u003e\n\u003ctd\u003e520 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033504665866,"sku":"5019000320","price":139.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033504698634,"sku":"5019000321","price":139.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033504731402,"sku":"5019000322","price":139.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033504764170,"sku":"5019000323","price":139.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033504796938,"sku":"5019000324","price":139.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-impact-shorts-3df-5-0-black__1.png?v=1793445445"},{"product_id":"leatt-kidney-belt-3df-3-5-black","title":"Leatt Kidney Belt 3DF 3.5 – Unisex – Black","description":"\u003cp\u003eThe Leatt Kidney Belt 3DF 3.5 supports and protects at the same time: its back section is made of flexible 3DF AirFit impact foam and is CE certified as lumbar impact protection to EN 1621-2 Level 1. Leatt itself calls the 3.5 unique for that reason.\u003c\/p\u003e\n\u003cp\u003eIt is built for long days in the saddle on motocross tracks, enduro loops and trails, with an extra-wide waistband for support and thermo-formed air channels to keep the lower back from overheating.\u003c\/p\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eCE certified lumbar impact protection to EN 1621-2, Level 1\u003c\/li\u003e\n\u003cli\u003eFlexible 3DF AirFit impact foam over the lower back\u003c\/li\u003e\n\u003cli\u003eDual-action elastic closure for secure lumbar support\u003c\/li\u003e\n\u003cli\u003eExtra-wide waistband that stays comfortable all ride long\u003c\/li\u003e\n\u003cli\u003eThermo-formed 3D ventilation channels for airflow in hot conditions\u003c\/li\u003e\n\u003cli\u003eThree sizes: S\/M, L\/XL, XXL\/3XL\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eProtection \u0026amp; certification\u003c\/h2\u003e\n\u003cp\u003eEN 1621-2 is the European standard for back protectors. Leatt has the lumbar area of the 3.5 tested to it, and the belt achieves Level 1. That makes it more than a support belt: the foam panel is a certified impact protector for the lower spine. It does not replace a full back protector covering the whole spine; the certification refers to the lumbar region.\u003c\/p\u003e\n\u003ch2\u003eSupport \u0026amp; closure\u003c\/h2\u003e\n\u003cp\u003eLeatt fits the 3.5 with a dual-action elastic closure that delivers secure lumbar support, and with an extra-wide waistband for maximum support. Both are elastic, so the belt moves with you instead of working against you when you change position on the bike.\u003c\/p\u003e\n\u003ch2\u003eVentilation\u003c\/h2\u003e\n\u003cp\u003eThe 3DF AirFit foam is thermo-formed with 3D air channels. Leatt designed them to improve airflow in hot conditions, so the belt stays comfortable to wear all day even when the temperature climbs.\u003c\/p\u003e\n\u003ch2\u003eMaterial \u0026amp; sizes\u003c\/h2\u003e\n\u003cp\u003eAccording to Leatt, the belt is made of 60 % polyurethane (the 3DF AirFit foam), 25 % polyester breathable mesh, 10 % nylon for the elastic components and 5 % rubber for the closure and waist stretch. It weighs 450 g. Choose from S\/M, L\/XL and XXL\/3XL; Leatt's manual for the kidney belts is available as a download from the manufacturer.\u003c\/p\u003e\n\u003ch2\u003eWhat you should know\u003c\/h2\u003e\n\u003cp\u003eThe CE certification is Level 1, the base level of EN 1621-2, and it applies to the lumbar section only. Riders who want the full length of the spine covered need a back protector or a body protector with back plate in addition. Please read Leatt's manual for fitting instructions before first use.\u003c\/p\u003e\n\u003ch2\u003eColour\u003c\/h2\u003e\n\u003cp\u003eAll-black keeps the 3.5 unobtrusive under the jersey and means dirt and dust from the trail barely show between washes.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct\u003c\/td\u003e\n\u003ctd\u003eKidney belt with lumbar impact protection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eLumbar: EN 1621-2, Level 1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact foam\u003c\/td\u003e\n\u003ctd\u003e3DF AirFit, thermo-formed ventilation channels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eDual-action elastic closure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e60 % polyurethane (3DF AirFit foam), 25 % polyester mesh, 10 % nylon, 5 % rubber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\/3XL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight (manufacturer)\u003c\/td\u003e\n\u003ctd\u003e450 g\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePackaging\u003c\/td\u003e\n\u003ctd\u003ePlastic-free\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of origin\u003c\/td\u003e\n\u003ctd\u003eChina\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033505353994,"sku":"5016000100","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033505386762,"sku":"5016000101","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XXL\/3XL \/ Black","offer_id":54033505419530,"sku":"5016000102","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-kidney-belt-3df-3-5-black__1.png?v=1793445455"},{"product_id":"leatt-knee-brace-c-frame-hybrid-black","title":"Leatt Knee Brace C-Frame Hybrid – Unisex – Black","description":"\u003cp\u003eThe Leatt C-Frame Hybrid is a knee brace, not a knee pad. It guides the knee joint with a stiff carbon chassis and a single hinge on the outside of the leg, and Leatt designed it to help reduce the forces that can lead to ACL, MCL and meniscus injuries.\u003c\/p\u003e\u003cp\u003eThe word Hybrid refers to the knee cup: a ReaFlex impact gel cushion with a hard-shell slider on top, which adds CE-certified impact protection to EN 1621-1 Level 1 on the kneecap. You get joint guidance and kneecap protection in one product.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCarbon chassis with a super-stiff mono-hinge\u003c\/li\u003e\n\u003cli\u003eThree-point force distribution, designed by Leatt to help reduce forces on the knee\u003c\/li\u003e\n\u003cli\u003eHybrid ReaFlex impact gel knee cup with hard-shell slider\u003c\/li\u003e\n\u003cli\u003eKneecap impact protection certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eAdjustable hyperextension stops at 10°, 15°, 20° and 25°\u003c\/li\u003e\n\u003cli\u003eLab-tested built-in fracture points to protect tibia and femur\u003c\/li\u003e\n\u003cli\u003eVery low-profile inner knee for close bike feel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eJoint guidance\u003c\/h2\u003e\u003cp\u003eA knee brace works differently from a guard. The C-Frame's mono-hinge chassis is very stiff and spreads load across three points of the leg, and Leatt designed this to help reduce forces on the knee and the risk of ACL, MCL and meniscus injuries. Hyperextension stops limit how far the knee can straighten; you can set them at 10°, 15°, 20° or 25°, with ACL injury reduction as the stated aim.\u003c\/p\u003e\u003ch2\u003eBuilt to break in the right place\u003c\/h2\u003e\u003cp\u003eThe C-Frame chassis has engineered fracture points that Leatt has tested in the lab. In an extreme crash the frame is designed to break before the shin bone (tibia) or thigh bone (femur) does. This is a deliberate safety feature: a brace that is too strong could transfer the load to the bone.\u003c\/p\u003e\u003ch2\u003eKneecap protection\u003c\/h2\u003e\u003cp\u003eThe hybrid knee cup combines ReaFlex impact gel with a hard-shell slider. The gel cushions, the slider helps the knee glide on impact. Leatt certifies this impact protection to EN 1621-1 Level 1, so the C-Frame Hybrid covers both jobs that riders otherwise solve with a brace plus a separate knee guard.\u003c\/p\u003e\u003ch2\u003eBike feel and boot fit\u003c\/h2\u003e\u003cp\u003eThe single hinge sits on the outside, so the inner side of the knee stays very low profile. That gives a direct feel for the bike when you grip with your knees. At the bottom, a comfortable, low-profile shin plate with a load distribution pad is designed to fit inside all boots.\u003c\/p\u003e\u003ch2\u003eSizes\u003c\/h2\u003e\u003cp\u003eThe C-Frame Hybrid comes in S\/M, L\/XL and XXL. A knee brace has to sit precisely on the joint, so take your measurements carefully and follow Leatt's sizing guidance before ordering. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eA knee brace limits movement and needs careful set-up: hinge position, strap tension and the hyperextension stop all affect how it works, so follow the manual. No brace can rule out injuries. The brace is designed to break under extreme load to protect your bones, which means a brace that has taken a hard crash must be checked and possibly replaced. If you have an existing knee injury, ask your doctor which hyperextension setting suits you.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black carbon chassis and black knee cup give the C-Frame Hybrid a technical, understated look under any pant colour. Carbon's woven surface stays visible up close, and black hardware does not draw attention to the hinge.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKnee brace with mono-hinge and hybrid knee cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eCarbon, mono-hinge with three-point force distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnee cup\u003c\/td\u003e\n\u003ctd\u003eHybrid ReaFlex impact gel with hard-shell slider\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact certification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHyperextension stops\u003c\/td\u003e\n\u003ctd\u003e10°, 15°, 20°, 25°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety feature\u003c\/td\u003e\n\u003ctd\u003eLab-tested built-in fracture points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShin\u003c\/td\u003e\n\u003ctd\u003eLow-profile shin plate with load distribution pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033506140426,"sku":"5023050500","price":628.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033506173194,"sku":"5023050501","price":628.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033506205962,"sku":"5023050502","price":628.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-brace-c-frame-hybrid-black__1.png?v=1793445470"},{"product_id":"leatt-knee-brace-c-frame-pro-carbon-black","title":"Leatt Knee Brace C-Frame Pro Carbon – Unisex – Black","description":"\u003cp\u003eThe Leatt C-Frame Pro Carbon is the stripped-down carbon version of Leatt's single-hinge knee brace. It pairs an ultra-light carbon construction with a super-stiff mono-hinge chassis, and Leatt's focus here is support and bike feel: one hinge on the outside, a very low-profile inner side against the bike.\u003c\/p\u003e\u003cp\u003eAs a knee brace it guides the joint rather than just padding it. Leatt designed it to help reduce the risk of ACL, MCL and meniscus injuries.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCarbon chassis construction\u003c\/li\u003e\n\u003cli\u003eSuper-stiff mono-hinge with three-point force distribution\u003c\/li\u003e\n\u003cli\u003eVery low-profile inner knee for superior bike feel\u003c\/li\u003e\n\u003cli\u003eDesigned by Leatt to help reduce forces linked to ACL, MCL and meniscus injuries\u003c\/li\u003e\n\u003cli\u003eHyperextension stops adjustable at 10°, 15°, 20° and 25°\u003c\/li\u003e\n\u003cli\u003eImpact protection certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eEngineered fracture points, shin plate that fits inside all boots\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the C-Frame supports the knee\u003c\/h2\u003e\u003cp\u003eThe mono-hinge frame is extremely stiff and spreads load over three points along the leg. Leatt designed it this way to help reduce forces on the knee joint and the risk of injuries to the anterior cruciate ligament, the medial collateral ligament and the meniscus.\u003c\/p\u003e\u003cp\u003eHyperextension stops set the limit for straightening the knee and can be adjusted to 10°, 15°, 20° or 25°. Leatt names ACL injury reduction as their purpose. Which setting is right depends on your knee; a physician or physiotherapist can advise if you have had an injury.\u003c\/p\u003e\u003ch2\u003eImpact certification\u003c\/h2\u003e\u003cp\u003eThe C-Frame Pro Carbon is CE tested and certified as impact protection to EN 1621-1 Level 1 for the knee. Leatt describes this as impact-certified protection; it does not list a separate gel knee cup for this model.\u003c\/p\u003e\u003ch2\u003eSafety by design\u003c\/h2\u003e\u003cp\u003eLeatt has engineered and lab-tested fracture points into the chassis. The C-Frame is designed to break before the tibia or femur would, so that in an extreme crash the brace gives way instead of passing the load to the bone.\u003c\/p\u003e\u003ch2\u003eBike feel and boots\u003c\/h2\u003e\u003cp\u003eWith the hinge only on the outside, the inner knee profile stays very slim, which lets you grip the bike closely. A comfortable, low-profile shin plate with a load distribution pad sits at the bottom of the brace and is designed to fit inside all boots.\u003c\/p\u003e\u003ch2\u003eSizes and packaging\u003c\/h2\u003e\u003cp\u003eThree sizes are available: S\/M, L\/XL and XXL. Measure carefully, because a knee brace only works when the hinge lines up with the joint. Leatt ships the brace in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eRiding use\u003c\/h2\u003e\u003cp\u003eLeatt lists the C-Frame Pro Carbon for motocross, enduro and trail riding.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eCompared with the C-Frame Hybrid, Leatt's product page for the Pro Carbon does not mention the ReaFlex gel knee cup with hard-shell slider. If you want that dedicated kneecap cushion, the Hybrid is the model that has it. A brace must be set up carefully and checked after any hard crash, since the frame is designed to break under extreme load. No brace can prevent every injury.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black carbon finish is the essence of this model: it looks lean and technical, and the dark chassis disappears under motocross pants of any colour. Scratches on carbon show as lighter lines over time, which is cosmetic.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKnee brace with mono-hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eCarbon, mono-hinge with three-point force distribution\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact certification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHyperextension stops\u003c\/td\u003e\n\u003ctd\u003e10°, 15°, 20°, 25°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSafety feature\u003c\/td\u003e\n\u003ctd\u003eLab-tested built-in fracture points\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShin\u003c\/td\u003e\n\u003ctd\u003eLow-profile shin plate with load distribution pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033506992394,"sku":"5017010100","price":628.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033507025162,"sku":"5017010101","price":628.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033507057930,"sku":"5017010102","price":628.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-brace-c-frame-pro-carbon-black__1.png?v=1793445488"},{"product_id":"leatt-knee-brace-sleeve-black","title":"Leatt Knee Brace Sleeve – Unisex – Black","description":"\u003cp\u003eThe Leatt Knee Brace Sleeve is not a protector. It is a stretch undersleeve that you wear between your leg and a knee brace, and its job is comfort and hold: it keeps the brace from rubbing on bare skin and helps stop it from slipping down.\u003c\/p\u003e\u003cp\u003eThe trick is the length. The sleeve is extra long, so you can fold it over the top and bottom of the brace, which reduces the risk of the brace creeping down the leg during a ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eUndersleeve for knee braces, worn beneath the brace\u003c\/li\u003e\n\u003cli\u003eExtra-long cut folds over the brace at top and bottom\u003c\/li\u003e\n\u003cli\u003eHelps prevent the knee brace from slipping down\u003c\/li\u003e\n\u003cli\u003eAnti-odour MoistureCool wicking fabric for quick evaporation\u003c\/li\u003e\n\u003cli\u003eFlatlock stitching for extra comfort\u003c\/li\u003e\n\u003cli\u003eSold as a pair, sizes S\/M, L\/XL and XXL\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhat it does\u003c\/h2\u003e\u003cp\u003eA knee brace sits on the leg with straps, and on bare skin it can chafe or slide. The sleeve goes on first, the brace goes on top, and then the extra length is folded over the upper and lower ends of the brace. That fold holds the brace in position and reduces the risk of it slipping.\u003c\/p\u003e\u003ch2\u003eFabric and seams\u003c\/h2\u003e\u003cp\u003eLeatt uses MoistureCool, an anti-odour wicking fabric that moves sweat outwards for quick evaporation. According to Leatt's data the material is 80% polyester, 12% elastane, 4% polychloride and 4% other fibres. Flatlock stitching keeps the seams flat against the skin, so they do not press under the brace straps.\u003c\/p\u003e\u003ch2\u003eSizes and pack\u003c\/h2\u003e\u003cp\u003eThe sleeves come as a pair and in three sizes: S\/M, L\/XL and XXL. Choose the size that matches your brace and leg; the sleeve should sit smooth without wrinkles under the brace. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eBackground reading\u003c\/h2\u003e\u003cp\u003eThe only document Leatt attaches to the sleeve is its knee brace white paper, which explains how Leatt braces are designed to work.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe Knee Brace Sleeve offers no impact protection and has no CE rating as a protector; it is an accessory. It does not include a brace. Leatt describes it for use under a knee brace in general; the product page does not limit it to a specific Leatt brace model.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack matches the dark chassis of most knee braces and does not show through light pants. It also hides the marks that brace straps and hinges leave on the fabric over time.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eUndersleeve for knee braces (not a protector)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUse\u003c\/td\u003e\n\u003ctd\u003eWorn under the knee brace\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003eExtra long, folds over at top and bottom\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFabric\u003c\/td\u003e\n\u003ctd\u003eAnti-odour MoistureCool wicking fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e80% polyester, 12% elastane, 4% polychloride, 4% other fibres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeams\u003c\/td\u003e\n\u003ctd\u003eFlatlock stitching\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSold as\u003c\/td\u003e\n\u003ctd\u003ePair (left and right)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033507614986,"sku":"5015100100","price":34.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033507647754,"sku":"5015100101","price":34.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033507680522,"sku":"5015100102","price":34.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-brace-sleeve-black__1.png?v=1793445498"},{"product_id":"leatt-knee-brace-x-frame-black","title":"Leatt Knee Brace X-Frame – Unisex – Black","description":"\u003cp\u003eThe Leatt X-Frame is a dual-hinge knee brace built around asymmetry. The hinge on the inside of the knee is, according to Leatt, 40% slimmer, so it interferes as little as possible with your grip on the bike, while the outer hinge uses metal gears for precise, durable movement.\u003c\/p\u003e\u003cp\u003eIt is a knee brace, not a knee guard. Leatt designed the injected carbon composite frame to help reduce the risk of ACL, MCL and meniscus injuries, and it also carries CE-certified impact protection to EN 1621-1 Level 1.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInjected carbon composite frame\u003c\/li\u003e\n\u003cli\u003eAsymmetrical hinges: 40% slimmer inner hinge (manufacturer figure)\u003c\/li\u003e\n\u003cli\u003eMetal-geared outer hinge for precise movement and durability\u003c\/li\u003e\n\u003cli\u003eDesigned by Leatt to help reduce forces behind ACL, MCL and meniscus injuries\u003c\/li\u003e\n\u003cli\u003eHyperextension stops at 5°, 10°, 15° and 20°\u003c\/li\u003e\n\u003cli\u003eCE impact protection to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eInterchangeable hinge padding sizes for a customised fit\u003c\/li\u003e\n\u003cli\u003eLow-profile shin bone pad that fits inside all boots\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTwo hinges, two jobs\u003c\/h2\u003e\u003cp\u003eMany braces mirror the same hinge on both sides. The X-Frame does not. On the inside, where your knee presses against the bike, the hinge is slimmed down by 40% according to Leatt, which improves bike feel. On the outside, where there is room, a metal-geared hinge provides precise tracking of the knee's movement and long-term durability.\u003c\/p\u003e\u003ch2\u003eJoint guidance and certification\u003c\/h2\u003e\u003cp\u003eLeatt designed the frame to help reduce forces on the knee and with them the risk of ACL, MCL and meniscus injuries. Hyperextension stops can be set at 5°, 10°, 15° or 20°, with ACL injury reduction as their purpose.\u003c\/p\u003e\u003cp\u003eSeparately, the X-Frame is CE tested and certified as impact protection to EN 1621-1 Level 1 for the knee.\u003c\/p\u003e\u003ch2\u003eFrame and materials\u003c\/h2\u003e\u003cp\u003eThe chassis is injection-moulded from carbon composite. Leatt's material data lists 45% carbon composite for the chassis, 25% high-density nylon for frame components, 15% polyurethane impact foam, 10% stainless steel for the hinge system and 5% other parts such as Velcro, straps and hardware.\u003c\/p\u003e\u003ch2\u003eFit and comfort\u003c\/h2\u003e\u003cp\u003eA comfortable, easy-fitting strap system holds the brace in place. Interchangeable hinge padding comes in different sizes so you can tune how the brace sits around your knee. At the bottom, a low-profile shin bone pad is designed to fit inside all boots.\u003c\/p\u003e\u003ch2\u003eSizes\u003c\/h2\u003e\u003cp\u003eThe X-Frame is offered in five sizes, S, M, L, XL and XXL. A brace only works if its hinges line up with the knee joint, so measure carefully before choosing. Leatt ships it in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eLeatt's product page for the standard X-Frame lists no ReaFlex gel knee cup; that cushion is the defining extra of the X-Frame Hybrid. Hyperextension stops on this model run from 5° to 20°. A knee brace needs careful set-up and should be inspected after a hard crash, and no brace can prevent every injury. If you are recovering from a knee injury, discuss the stop setting with your doctor.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack carbon composite gives the X-Frame a sober, technical look. The metal outer hinge stands out slightly against the dark frame, and the black finish keeps scuffs from boots and the bike less visible.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKnee brace with dual asymmetrical hinges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eInjected carbon composite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHinges\u003c\/td\u003e\n\u003ctd\u003e40% slimmer inner hinge, metal-geared outer hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact certification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHyperextension stops\u003c\/td\u003e\n\u003ctd\u003e5°, 10°, 15°, 20°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eInterchangeable hinge padding sizes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShin\u003c\/td\u003e\n\u003ctd\u003eLow-profile shin bone pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033508172042,"sku":"5018010101","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033508204810,"sku":"5018010102","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033508237578,"sku":"5018010103","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033508270346,"sku":"5018010104","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033508303114,"sku":"5018010105","price":539.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-brace-x-frame-black__1.png?v=1793445512"},{"product_id":"leatt-knee-brace-x-frame-hybrid-black","title":"Leatt Knee Brace X-Frame Hybrid – Unisex – Black","description":"\u003cp\u003eLeatt calls the X-Frame Hybrid its top-level cage-type knee brace. It combines the dual-hinge carbon composite chassis of the X-Frame with a Hybrid ReaFlex impact gel knee cup, so ligament support and kneecap impact protection come together in one brace.\u003c\/p\u003e\u003cp\u003eLeatt designed it to help reduce forces on the knee and the risk of ACL, MCL and meniscus injuries. Leatt also highlights a separate sleeve and numbered straps, both aimed at a consistent, comfortable fit every time you put it on.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDual-hinge injected carbon composite chassis\u003c\/li\u003e\n\u003cli\u003eHybrid ReaFlex impact gel knee cup\u003c\/li\u003e\n\u003cli\u003eDesigned by Leatt to help reduce the risk of ACL, MCL and meniscus injuries\u003c\/li\u003e\n\u003cli\u003eKnee impact protection certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eSlim inner hinge for bike feel, metal-geared outer hinge for precision\u003c\/li\u003e\n\u003cli\u003eHyperextension stops at 10°, 15°, 20° and 25°\u003c\/li\u003e\n\u003cli\u003eNumbered straps and interchangeable hinge padding sizes\u003c\/li\u003e\n\u003cli\u003eSeparate sleeve for comfort and freedom of movement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the brace works\u003c\/h2\u003e\u003cp\u003eLeatt designed the frame to help reduce forces on the knee and so the risk of injuries to the anterior cruciate ligament, the medial collateral ligament and the meniscus. Adjustable hyperextension stops at 10°, 15°, 20° or 25° restrict how far the knee can straighten, intended by Leatt to help reduce ACL injuries.\u003c\/p\u003e\u003ch2\u003eThe hybrid knee cup\u003c\/h2\u003e\u003cp\u003eWhere the standard X-Frame leaves the kneecap to a separate guard, the Hybrid integrates a ReaFlex impact gel knee cup. The knee is CE tested and certified as impact protection to EN 1621-1 Level 1. For riders who want one product on the knee instead of a brace plus a pad, that is the deciding difference.\u003c\/p\u003e\u003ch2\u003eChassis and hinges\u003c\/h2\u003e\u003cp\u003eThe chassis is injected carbon composite. On the inside, a slim hinge keeps the profile low where your knee grips the bike, which Leatt says gives superior bike feel. On the outside, a metal-geared hinge provides precise movement and durability. Leatt's material data lists about 60% carbon fibre composite, 20% polyamide, 10% polypropylene, 5% AirFlex impact gel and 5% other components.\u003c\/p\u003e\u003ch2\u003eFit and comfort\u003c\/h2\u003e\u003cp\u003eNumbered straps make it easier to fasten the brace the same way every time. Interchangeable hinge padding sizes let you tune the fit around your knee, and the separate sleeve allows freer movement, according to Leatt. A low-profile shin bone pad is designed to fit inside all boots.\u003c\/p\u003e\u003ch2\u003eSizes\u003c\/h2\u003e\u003cp\u003eFive sizes from S to XXL are available. Leatt's documents refer to the X-Frame Hybrid as a pair. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is a knee brace that needs careful set-up of straps, padding and hyperextension stops; take time with the manual before the first ride. Note that hyperextension stops here run from 10° to 25°, while the standard X-Frame uses 5° to 20°. No brace can prevent every injury, and it should be checked after a heavy crash. Leatt's material data names AirFlex gel, while its product page calls the knee cup ReaFlex; we follow the product page.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eAll in black, the X-Frame Hybrid looks compact despite its integrated knee cup. The dark cup and chassis blend into one unit under your pants, and the metal outer hinge is the only accent.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eCage-type knee brace with hybrid knee cup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eInjected carbon composite, dual hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHinges\u003c\/td\u003e\n\u003ctd\u003eSlim inner hinge, metal-geared outer hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eKnee cup\u003c\/td\u003e\n\u003ctd\u003eHybrid ReaFlex impact gel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact certification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHyperextension stops\u003c\/td\u003e\n\u003ctd\u003e10°, 15°, 20°, 25°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eNumbered straps, interchangeable hinge padding, separate sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033509187850,"sku":"5021200100","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033509220618,"sku":"5021200101","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033509253386,"sku":"5021200102","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033509286154,"sku":"5021200103","price":539.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033509318922,"sku":"5021200104","price":539.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-brace-x-frame-hybrid-black__1.png?v=1793445529"},{"product_id":"leatt-knee-brace-z-frame-black","title":"Leatt Knee Brace Z-Frame – Unisex – Black","description":"\u003cp\u003eThe Leatt Z-Frame is the entry point into Leatt's knee braces. An injected composite chassis with aluminium hinge covers provides the rigidity a brace needs, and Leatt designed it to help reduce forces on the knee and the risk of ACL, MCL and meniscus injuries.\u003c\/p\u003e\u003cp\u003eLeatt designed it around ease of use: slim hinges for bike feel, a low-profile strap system that is quick to put on, and a shin bone pad that fits inside your boots. Leatt's data sheet describes it as a little less rigid than the C-Frame or X-Frame, with comfort for long rides in mind.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eDesigned by Leatt to help reduce the risk of ACL, MCL and meniscus injuries\u003c\/li\u003e\n\u003cli\u003eInjected composite chassis with aluminium hinge covers\u003c\/li\u003e\n\u003cli\u003eSlim hinges for bike feel and boot fit\u003c\/li\u003e\n\u003cli\u003eEasy-fit, low-profile strap system\u003c\/li\u003e\n\u003cli\u003eHyperextension stops at 10°, 15°, 20° and 25°\u003c\/li\u003e\n\u003cli\u003eKnee impact protection certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eInterchangeable hinge padding sizes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eHow the brace works\u003c\/h2\u003e\u003cp\u003eLeatt designed the Z-Frame to help reduce the forces acting on the knee and so the risk of injuries to the ACL, MCL and meniscus. Hyperextension stops can be set at 10°, 15°, 20° or 25° to restrict how far the leg straightens, with ACL injury reduction as the stated aim.\u003c\/p\u003e\u003cp\u003eIn addition, the knee is CE tested and certified as impact protection to EN 1621-1 Level 1.\u003c\/p\u003e\u003ch2\u003eChassis and materials\u003c\/h2\u003e\u003cp\u003eLeatt uses an injected composite chassis with aluminium hinge covers. According to Leatt's data the brace is made of 50% glass-filled nylon composite, 25% carbon-injected polymer for added stiffness around the knee, 10% aluminium alloy for the hinge caps, 10% EVA foam padding and 5% other components. The aluminium covers add structural strength where the hinges take load.\u003c\/p\u003e\u003ch2\u003eGetting it on\u003c\/h2\u003e\u003cp\u003eA brace is only useful if you wear it every ride. The Z-Frame's strap system is low profile, comfortable and easy to fit, which Leatt emphasises for this model. Interchangeable hinge padding sizes let you adjust the fit around your knee, and the low-profile shin bone pad gives a good fit inside your boots.\u003c\/p\u003e\u003ch2\u003eBike feel\u003c\/h2\u003e\u003cp\u003eSlim hinges keep the brace narrow at the knee, giving you direct contact with the bike and enough room inside your pants.\u003c\/p\u003e\u003ch2\u003eSizes\u003c\/h2\u003e\u003cp\u003eFive sizes are available, S, M, L, XL and XXL. Leatt's documents list the Z-Frame as a pair. For a junior rider, Leatt offers the Z-Frame Jr in a dedicated junior size. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eLeatt positions the Z-Frame below the C-Frame and X-Frame; its data sheet describes it as less rigid than those two but more comfortable for long rides. There is no separate gel knee cup listed. A knee brace has to be set up and fitted correctly to work and should be checked after a hard crash. No brace can prevent knee injuries completely.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black Z-Frame with its aluminium hinge covers looks purposeful without being flashy. Under dark pants it disappears; under light ones, the black frame shows only as a slim outline at the knee.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKnee brace with slim dual hinges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eInjected composite, aluminium hinge covers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact certification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHyperextension stops\u003c\/td\u003e\n\u003ctd\u003e10°, 15°, 20°, 25°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e50% glass-filled nylon composite, 25% carbon-injected polymer, 10% aluminium alloy, 10% EVA foam, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eLow-profile strap system, interchangeable hinge padding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShin\u003c\/td\u003e\n\u003ctd\u003eLow-profile shin bone pad\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033510105354,"sku":"5022121900","price":269.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033510138122,"sku":"5022121901","price":269.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033510170890,"sku":"5022121902","price":269.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033510203658,"sku":"5022121903","price":269.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033510236426,"sku":"5022121904","price":269.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-brace-z-frame-black__1.png?v=1793445545"},{"product_id":"leatt-knee-brace-z-frame-jr-kids-black","title":"Leatt Knee Brace Z-Frame Jr – Kids – Black","description":"\u003cp\u003eYoung riders crash, jump and land just like adults, and their knees deserve the same kind of protection. The Leatt Z-Frame Jr brings Leatt's knee brace technology to a dedicated junior size, so a child's knee joint gets guidance and support rather than just padding.\u003c\/p\u003e\u003cp\u003eIt is built on the adult Z-Frame: an injected composite chassis with aluminium hinge covers, designed by Leatt to help reduce forces on the knee and the risk of ACL, MCL and meniscus injuries, plus CE-certified impact protection to EN 1621-1 Level 1.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKnee brace designed by Leatt for young riders\u003c\/li\u003e\n\u003cli\u003eInjected composite chassis with aluminium hinge covers\u003c\/li\u003e\n\u003cli\u003eSlim hinges that fit comfortably inside boots\u003c\/li\u003e\n\u003cli\u003eEasy-fit, low-profile strap system\u003c\/li\u003e\n\u003cli\u003eHyperextension stops at 10°, 15°, 20° and 25°\u003c\/li\u003e\n\u003cli\u003eKnee impact protection to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eInterchangeable hinge padding for a custom fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy a brace for kids\u003c\/h2\u003e\u003cp\u003eA knee guard cushions blows to the kneecap; a knee brace guides the joint itself. Leatt designed the Z-Frame Jr to help reduce forces that can lead to ACL, MCL and meniscus injuries. Hyperextension stops at 10°, 15°, 20° or 25° limit how far the knee straightens.\u003c\/p\u003e\u003cp\u003eThe knee is also CE tested and certified as impact protection to EN 1621-1 Level 1.\u003c\/p\u003e\u003ch2\u003eConstruction\u003c\/h2\u003e\u003cp\u003eLike the adult model, the Junior uses an injected composite chassis with aluminium hinge covers for rigidity. Leatt's material data lists 50% glass-filled nylon composite, 25% carbon-injected polymer, 10% aluminium alloy, 10% EVA foam and 5% other components. Slim hinges keep the brace narrow at the knee for good bike feel.\u003c\/p\u003e\u003ch2\u003eFit for smaller legs\u003c\/h2\u003e\u003cp\u003eA comfortable, low-profile strap system makes it easy for a young rider, or a parent, to put the brace on. Interchangeable hinge padding sizes allow the fit to be fine-tuned, which helps on growing legs. The low-profile shin bone pad is designed for a good fit inside boots.\u003c\/p\u003e\u003ch2\u003eSize\u003c\/h2\u003e\u003cp\u003eThe Z-Frame Jr comes in a single Junior size. Leatt does not publish a height range for it on the product page, so compare it with your child's leg measurements against Leatt's sizing guidance before ordering. Leatt lists it as a pair. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eA knee brace for children needs the same careful set-up as an adult brace: correct hinge position, strap tension and hyperextension setting. Check the fit regularly as your child grows, and inspect the brace after any hard crash. No brace can exclude knee injuries. If your child has had a knee injury, ask a doctor before choosing the stop setting.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack keeps the Z-Frame Jr neutral, so it matches any kids' kit and team colours. The dark frame also hides the scuffs a young rider's brace inevitably collects on the practice track.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKids' knee brace with slim hinges\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eChassis\u003c\/td\u003e\n\u003ctd\u003eInjected composite, aluminium hinge covers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact certification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHyperextension stops\u003c\/td\u003e\n\u003ctd\u003e10°, 15°, 20°, 25°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e50% glass-filled nylon composite, 25% carbon-injected polymer, 10% aluminium alloy, 10% EVA foam, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFit\u003c\/td\u003e\n\u003ctd\u003eLow-profile strap system, interchangeable hinge padding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003eJunior\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"Junior \/ Black","offer_id":54033510793482,"sku":"5020004160","price":229.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-brace-z-frame-jr-kids-black__1.png?v=1793445557"},{"product_id":"leatt-knee-guard-3df-5-0-evo-fastfit-black","title":"Leatt Knee Guard 3DF 5.0 Evo FastFit – Unisex – Black","description":"\u003cp\u003eThe FastFit version of the Leatt 3DF 5.0 Evo solves a small but daily annoyance: pulling a knee sleeve over your foot. Its hook-and-loop fasteners open the guard so you can put it on or take it off without removing your shoes, which helps in the pits, at the trailhead or when you just want the pads off between sessions.\u003c\/p\u003e\u003cp\u003eUnderneath that closure sits the same principle as the standard 3DF guards, soft 3DF AirFit foam certified to EN 1621-1 Level 1, here with added coverage reaching towards the shin according to Leatt.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFastFit hook-and-loop closure, no need to remove shoes\u003c\/li\u003e\n\u003cli\u003eEN 1621-1 Level 1 certified 3DF AirFit impact foam\u003c\/li\u003e\n\u003cli\u003eAdded shin protection below the knee (manufacturer description)\u003c\/li\u003e\n\u003cli\u003eThinner chassis fabric than earlier versions\u003c\/li\u003e\n\u003cli\u003eDeflexion outer layer for durability\u003c\/li\u003e\n\u003cli\u003ePerforated protection and perforated neoprene sleeve\u003c\/li\u003e\n\u003cli\u003eAnti-slip calf band and silicone-printed leg straps\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 13 points (manufacturer rating)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eClosure and handling\u003c\/h2\u003e\u003cp\u003eFastFit means the guard does not have to be slid on like a tube. The hook-and-loop fasteners let you wrap it around the leg and close it in place, then fine-tune the fit with the adjustable leg straps. For riders who change between riding gear and casual shoes several times a day, that is the main reason to pick this model over the standard 3DF 5.0 Evo.\u003c\/p\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eThe knee section is CE tested and certified to EN 1621-1 at Level 1. Leatt describes 3DF AirFit impact foam with added shin protection, so the soft padding extends further down than on a pure kneecap pad.\u003c\/p\u003e\u003cp\u003eOn Leatt's own scale the FastFit reaches 13 protection points. That number is a manufacturer rating, useful for comparing Leatt guards with each other but not part of the certification.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cp\u003eThe outside is made with Deflexion, an abrasion-resistant layer that Leatt calls ultra-light and durable. The 4-way stretch material across the knee belongs to the CE-certified construction. Leatt notes an improved, thinner chassis fabric, which keeps the guard slim under riding pants.\u003c\/p\u003e\u003ch2\u003eVentilation and comfort\u003c\/h2\u003e\u003cp\u003eAll protective materials are perforated, and the neoprene sleeve is too. Combined with the pre-curved shape this is meant for long days: Leatt says the guard can be worn all day long, and the ventilated fabrics are the reason it does not turn into a heat pack.\u003c\/p\u003e\u003ch2\u003eSizing\u003c\/h2\u003e\u003cp\u003eUnlike the single-sized standard 3DF 5.0 Evo, the FastFit comes in three combined sizes: S\/M, L\/XL and XXL. The adjustable straps cover the range within each size.\u003c\/p\u003e\u003ch2\u003eCertificates and manual\u003c\/h2\u003e\u003cp\u003eFor the FastFit version Leatt publishes its own documents, separate from the standard 3DF 5.0 Evo: a manual, an EU type-examination certificate from RICOTEST and the matching declaration of conformity. The manual explains how to close the hook-and-loop sections and set the leg straps so the knee cup sits centred.\u003c\/p\u003e\u003ch2\u003eRiding use\u003c\/h2\u003e\u003cp\u003eLeatt lists the FastFit for motocross, enduro and trail. It ships in plastic-free packaging.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThis is a soft guard without a hard cap over the knee, certified at Level 1. If you want the higher Level 2 class, Leatt offers it in other models. Hook-and-loop fasteners collect grass and fluff over time, so clean them now and then for a reliable grip. The FastFit is a protector only and offers no ligament support like a knee brace.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack suits the FastFit because the hook-and-loop areas and straps stay inconspicuous, and dirt on the Velcro edges is less visible than on a light colour. Under dark or bright pants alike, nothing shows through.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eKnee guard with FastFit closure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e13 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact material\u003c\/td\u003e\n\u003ctd\u003e3DF AirFit impact foam, perforated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOuter layer\u003c\/td\u003e\n\u003ctd\u003eDeflexion, abrasion resistant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosure\u003c\/td\u003e\n\u003ctd\u003eFastFit hook-and-loop fasteners\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention\u003c\/td\u003e\n\u003ctd\u003eSilicone-printed adjustable leg straps, anti-slip calf band\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e408 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033511710986,"sku":"5025202520","price":119.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033511743754,"sku":"5025202521","price":119.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033511776522,"sku":"5025202522","price":119.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-guard-3df-5-0-evo-fastfit-black__3.png?v=1793445575"},{"product_id":"leatt-knee-guard-6-0-evo-black","title":"Leatt Knee Guard 6.0 Evo – Unisex – Black","description":"\u003cp\u003eThe Leatt Knee Guard 6.0 Evo brings Level 2 impact protection into a slim pad. It is certified to EN 1621-1:2012 at the higher of the two performance levels, yet it is built as a low-profile sleeve that disappears under race pants rather than a bulky hard-shell guard.\u003c\/p\u003e\u003cp\u003eThe combination behind it is 3DF soft impact foam with a perforated, flexible hard shell on top. Separated sliders on the inside let the guard flex with the knee, which is what makes Level 2 bearable for a full day on the bike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCertified to EN 1621-1:2012 Level 2 for the knee\u003c\/li\u003e\n\u003cli\u003e3DF AirFit soft foam under a perforated flexible hard shell\u003c\/li\u003e\n\u003cli\u003eHard cap that slides on impact instead of gripping\u003c\/li\u003e\n\u003cli\u003eSeparated internal sliders for flex and natural movement\u003c\/li\u003e\n\u003cli\u003eMoistureCool and Deflexion fabric sleeve\u003c\/li\u003e\n\u003cli\u003eAll protective materials perforated\u003c\/li\u003e\n\u003cli\u003eAnti-slip calf band\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 20 points (manufacturer rating)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eEN 1621-1 defines two levels for limb protectors, and the 6.0 Evo meets Level 2, the stricter one, in the 2012 edition of the standard. In practical terms that means the guard transmits less force in the standard drop test than a Level 1 protector of the same type.\u003c\/p\u003e\u003cp\u003eLeatt rates the guard at 20 points on its in-house protection score. That figure is the manufacturer's own system and sits above the soft 3DF 5.0 Evo models in Leatt's scale.\u003c\/p\u003e\u003ch2\u003eShell and impact layer\u003c\/h2\u003e\u003cp\u003eDirectly on the knee the 6.0 Evo uses 3DF soft impact foam, which stays supple until it is hit. On top sits a flexible hard shell that is perforated for airflow and acts as a hard cap; a hard surface helps the guard slide across the ground in a crash instead of catching.\u003c\/p\u003e\u003cp\u003eInside, the slider panels are separated rather than one rigid piece. Leatt says this allows maximum flex and comfort, so the knee can bend freely through the full riding range.\u003c\/p\u003e\u003ch2\u003eSleeve and ventilation\u003c\/h2\u003e\u003cp\u003eThe sleeve combines MoistureCool, a wicking fabric, with Deflexion for durability. All protection materials are perforated, so air reaches the skin through foam and shell. An anti-slip calf band holds the lower end in position.\u003c\/p\u003e\u003ch2\u003eFit and sizing\u003c\/h2\u003e\u003cp\u003eFive single sizes, S through XXL, are available. Because the design is low profile, the 6.0 Evo is suited to riders who want serious knee protection without changing pant size, and Leatt positions it for all-day wear.\u003c\/p\u003e\u003ch2\u003eChoosing between Leatt knee guards\u003c\/h2\u003e\u003cp\u003eIf you are deciding between the 6.0 Evo and Leatt's soft 3DF 5.0 Evo, the key differences are the certification level and the shell. The 6.0 Evo reaches Level 2 and carries a perforated hard shell, the 3DF 5.0 Evo is a Level 1 soft guard without one. Leatt's own scores reflect that: 20 points for the 6.0 Evo against 16 for the 3DF 5.0 Evo. In weight they are close, with Leatt stating 440 g and 486 g per pair.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe 6.0 Evo protects the knee; it does not support ligaments and has no hinges, so it is not a replacement for a knee brace. Leatt does not mention shin coverage for this model, so do not expect protection lower down the leg. The hard shell is flexible but still firmer than a pure foam pad, so give it a few rides to settle.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eIn black the perforated hard cap blends with the sleeve into one dark, discreet unit. Scuffs from crashes or knee-gripping show as lighter marks over time, which is normal on a working protector and tells you where it has done its job.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eLow-profile knee guard with hard shell\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1:2012 Level 2 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e20 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eImpact material\u003c\/td\u003e\n\u003ctd\u003e3DF AirFit soft impact foam, perforated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShell\u003c\/td\u003e\n\u003ctd\u003ePerforated flexible hard shell, hard cap\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSleeve\u003c\/td\u003e\n\u003ctd\u003eMoistureCool and Deflexion fabric\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention\u003c\/td\u003e\n\u003ctd\u003eAnti-slip calf band\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e440 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033512333578,"sku":"5026011210","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033512366346,"sku":"5026011211","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033512399114,"sku":"5026011212","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033512431882,"sku":"5026011213","price":129.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033512464650,"sku":"5026011214","price":129.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-guard-6-0-evo-black__2.png?v=1793445591"},{"product_id":"leatt-knee-guard-flexmesh-black","title":"Leatt Knee Guard FlexMesh – Unisex – Black","description":"\u003cp\u003eThe Leatt Knee Guard FlexMesh is the hard-cap option among Leatt's sleeve-type knee guards. A FlexMesh cap covers the kneecap and is certified to EN 1621-1 Level 1, while the extended sleeve reaches high up the thigh for a secure hold on rough tracks.\u003c\/p\u003e\u003cp\u003eWhat sets it apart is coverage around the knee rather than only on it: Leatt adds padding above the knee for handlebar strikes and protection on the sides, areas that a simple pad often leaves open.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFlexMesh hard cap for impacts and slides\u003c\/li\u003e\n\u003cli\u003eCE certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003ePadding above the knee against handlebar strikes\u003c\/li\u003e\n\u003cli\u003eSide and upper knee impact protection\u003c\/li\u003e\n\u003cli\u003eMoistureCool and AirMesh wicking fabrics\u003c\/li\u003e\n\u003cli\u003eHigh-rise sleeve with silicone-printed non-slip cuffs\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 14 points (manufacturer rating)\u003c\/li\u003e\n\u003cli\u003eWeight from 300 g per pair (manufacturer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCoverage around the knee\u003c\/h2\u003e\u003cp\u003eMost knee guards concentrate on the kneecap. The FlexMesh adds a padded zone above the knee, which Leatt designed for handlebar strikes, and impact protection on the sides and the upper knee. For motocross riders who come off the bars or clip the bike with the inside of the leg, that extra area is the main argument.\u003c\/p\u003e\u003cp\u003eThe extended leg sock reaches high on the thigh, which Leatt says gives good support and keeps the guard positioned.\u003c\/p\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eThe knee is CE certified to EN 1621-1 at Level 1. The FlexMesh impact technology combines a ventilated mesh structure with a hard cap, so the guard both absorbs and helps you slide when you hit the ground.\u003c\/p\u003e\u003cp\u003eLeatt rates the FlexMesh at 14 protection points. As with all Leatt scores, this is the manufacturer's own system, not a CE test value.\u003c\/p\u003e\u003ch2\u003eVentilation and fabrics\u003c\/h2\u003e\u003cp\u003eThe FlexMesh armour is perforated, and the sleeve uses MoistureCool and AirMesh wicking fabrics. Leatt describes the guard as a well-ventilated choice for hot conditions; the open structure lets air pass around the cap rather than trapping it under a closed shell.\u003c\/p\u003e\u003ch2\u003eFit and sizing\u003c\/h2\u003e\u003cp\u003eSingle sizing in S, M, L, XL and XXL gives a close fit, and silicone-printed cuffs stop the sleeve from sliding during movement. Leatt states a weight from 300 g per pair, depending on size.\u003c\/p\u003e\u003ch2\u003eFlexMesh or a soft guard?\u003c\/h2\u003e\u003cp\u003eLeatt offers the FlexMesh alongside soft guards such as the 3DF 5.0 Evo. Both are Level 1, but they protect differently. The FlexMesh has a hard cap that helps you slide and adds padding above and beside the knee; the 3DF 5.0 Evo relies on soft foam only. On Leatt's own scale the FlexMesh scores 14 points, the 3DF 5.0 Evo 16. If you want a hard cap and Level 2 together, the 6.0 Evo is the step up.\u003c\/p\u003e\u003ch2\u003eRiding use and documents\u003c\/h2\u003e\u003cp\u003eLeatt describes the FlexMesh as a guard for tough rides and lists it for motocross, enduro and trail. Its documents comprise a manual, an EU type-examination certificate from RICOTEST and an EU declaration of conformity. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe FlexMesh is certified to Level 1, not Level 2. It is a pull-on sleeve, so it has to go over your foot; there is no hook-and-loop opening. It has no hinges and gives no ligament support, and Leatt does not describe shin coverage beyond the knee area.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black FlexMesh looks technical rather than flashy: the dark mesh structure shows its ventilation pattern only up close. Black also hides the wear marks that a hard cap picks up from boots and seat edges.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHard-cap knee guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e14 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProtection\u003c\/td\u003e\n\u003ctd\u003eFlexMesh hard cap, side and upper knee padding\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFabrics\u003c\/td\u003e\n\u003ctd\u003eMoistureCool and AirMesh wicking fabrics\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRetention\u003c\/td\u003e\n\u003ctd\u003eSilicone-printed non-slip cuffs, high-rise sleeve\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eFrom 300 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS, M, L, XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S \/ Black","offer_id":54033513513226,"sku":"5026011460","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"M \/ Black","offer_id":54033513545994,"sku":"5026011461","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"L \/ Black","offer_id":54033513578762,"sku":"5026011462","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XL \/ Black","offer_id":54033513611530,"sku":"5026011463","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033513644298,"sku":"5026011464","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-guard-flexmesh-black__1.png?v=1793445615"},{"product_id":"leatt-knee-and-shin-guard-dual-axis-black","title":"Leatt Knee\u0026Shin Guard Dual Axis – Unisex – Black","description":"\u003cp\u003eThe Leatt Dual Axis covers more of the leg than a knee pad: a hard shell runs from the knee down over the shin, and both zones are CE certified to EN 1621-1 Level 1. For motocross riders who take roost, footpeg strikes and hard landings, that extra coverage is the point.\u003c\/p\u003e\u003cp\u003eWhat keeps it comfortable is the hinge. Two pivots on each side copy the natural motion of the knee, so the guard follows your leg instead of pushing against it when you stand up on the pegs.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eKnee and shin certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eHard shell overlaid on 3DF impact foam\u003c\/li\u003e\n\u003cli\u003eDual pivots each side that follow natural knee movement\u003c\/li\u003e\n\u003cli\u003eSlim shin plate for a good fit inside riding boots\u003c\/li\u003e\n\u003cli\u003eLarge ventilation ports in critical areas\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 25 points (manufacturer rating)\u003c\/li\u003e\n\u003cli\u003eWeight from 850 g per pair (manufacturer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eBoth the knee and the shin section are CE tested and certified as impact protection to EN 1621-1 at Level 1. The hard outer shell spreads and deflects a hit, while the 3DF impact foam underneath absorbs the energy that gets through.\u003c\/p\u003e\u003cp\u003eOn Leatt's own protection scale the Dual Axis reaches 25 points. Treat it as a manufacturer rating for comparing Leatt guards, not as a CE value.\u003c\/p\u003e\u003ch2\u003eThe dual-pivot hinge\u003c\/h2\u003e\u003cp\u003eRigid knee and shin guards often bind when you bend the leg because a single pivot point cannot follow the rolling motion of the knee. The Dual Axis uses two pivots on each side, which Leatt says replicate the knee's natural movement. The result is that the shin plate stays on the shin and the knee cup stays on the knee through the full range of motion.\u003c\/p\u003e\u003ch2\u003eMaterials\u003c\/h2\u003e\u003cp\u003eAccording to Leatt's data the guard is 50% polypropylene for the hard shell, 25% polyurethane for the 3DF impact foam, 15% nylon, 5% polyester and 5% other components. Leatt's data sheet also mentions a specific left and right design and a secure strapping system that keeps the guards in place.\u003c\/p\u003e\u003ch2\u003eBoots and ventilation\u003c\/h2\u003e\u003cp\u003eThe shin plate is slim so it slides into motocross and enduro boots without forcing the boot open. Ventilation ports are placed in critical areas for airflow, which matters with a hard shell that would otherwise trap heat.\u003c\/p\u003e\u003ch2\u003eSizes\u003c\/h2\u003e\u003cp\u003eThe Dual Axis comes in S\/M, L\/XL and XXL. Leatt gives the weight as from 850 g per pair, depending on size. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eDual Axis or Dual Axis Pro?\u003c\/h2\u003e\u003cp\u003eBoth guards share EN 1621-1 Level 1 certification for knee and shin and a Leatt score of 25 points. The Pro adds a geared hinge with a metal cover and rubberised inner hinge padding, and Leatt lists it at 740 g per pair against from 850 g for this model. The standard Dual Axis is the simpler design with two plain pivots per side.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eWith a hard shell and hinges, the Dual Axis is bulkier than a soft sleeve guard and weighs more; check that it fits under your pants and into your boots. It is a knee and shin guard, not a knee brace: the pivots follow the knee but do not limit hyperextension and offer no ligament support. It is certified at Level 1.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe black Dual Axis looks compact for a hard-shell guard, since the dark plates blend together visually. Black also hides the roost marks that a shin plate collects quickly at the front of the leg.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHard-shell knee and shin guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee and shin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e25 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHard shell over 3DF impact foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHinge\u003c\/td\u003e\n\u003ctd\u003eDual pivots on each side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e50% polypropylene, 25% polyurethane, 15% nylon, 5% polyester, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eFrom 850 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033516790026,"sku":"5022141230","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033516822794,"sku":"5022141231","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033516855562,"sku":"5022141232","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-and-shin-guard-dual-axis-black__5.png?v=1793445651"},{"product_id":"leatt-knee-and-shin-guard-dual-axis-grey","title":"Leatt Knee\u0026Shin Guard Dual Axis – Unisex – Grey","description":"\u003cp\u003eGrey plates with black details give this Leatt Dual Axis a lighter look than the all-black version, and the protection underneath is identical. From kneecap to shin, a hard shell sits on 3DF foam, and Leatt certifies both the knee and shin zones to EN 1621-1 Level 1.\u003c\/p\u003e\u003cp\u003eIf you ride motocross or enduro in boots and want the shin covered as well, the Dual Axis is built for that. Its hinge has two pivot points per side, so the guard moves with the knee rather than fighting it.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eCE certified for knee and shin, EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003e3DF impact foam beneath a hard shell\u003c\/li\u003e\n\u003cli\u003eTwo pivots per side copy the knee's natural motion\u003c\/li\u003e\n\u003cli\u003eSlim shin plate slides into riding boots\u003c\/li\u003e\n\u003cli\u003eVentilation ports placed in critical areas\u003c\/li\u003e\n\u003cli\u003eRated 25 points on Leatt's own protection score\u003c\/li\u003e\n\u003cli\u003eFrom 850 g per pair, according to Leatt\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCovering knee and shin\u003c\/h2\u003e\u003cp\u003eA pure knee guard leaves the shin to the boot. The Dual Axis extends its protection down the front of the lower leg, and Leatt has the shin part certified too: knee and shin are tested as impact protection to EN 1621-1 at Level 1. The hard shell spreads the load of a strike, and the 3DF foam below takes the energy out of it.\u003c\/p\u003e\u003cp\u003eLeatt gives this guard 25 points on its in-house scale. That is a manufacturer figure and useful mainly for comparing Leatt models.\u003c\/p\u003e\u003ch2\u003eMovement\u003c\/h2\u003e\u003cp\u003eHinged guards with one pivot tend to push the plates out of place when the knee bends deeply. Leatt solves this with two pivots on each side, which follow the knee's natural path. Comfort on and off the bike improves because the guard does not lever against the leg when you crouch or stand.\u003c\/p\u003e\u003ch2\u003eFit in the boot\u003c\/h2\u003e\u003cp\u003eThe shin plate is deliberately slim so it fits inside riding boots without wedging them open. Leatt's data sheet describes dedicated left and right shapes and a strapping system that keeps the guards from slipping.\u003c\/p\u003e\u003ch2\u003eAirflow\u003c\/h2\u003e\u003cp\u003eLarge ventilation ports sit in the areas that heat up most. A hard-shell guard needs that, especially on long summer motos.\u003c\/p\u003e\u003ch2\u003eMaterials and sizes\u003c\/h2\u003e\u003cp\u003eLeatt's material list gives 50% polypropylene for the shell, 25% polyurethane for the foam, 15% nylon, 5% polyester and 5% other parts. Three sizes are offered: S\/M, L\/XL and XXL. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003ePaperwork\u003c\/h2\u003e\u003cp\u003eThe grey version shares its documents with the black one: Leatt's manual for the Dual Axis and an EU declaration of conformity issued through RICOTEST. Leatt lists the guard for motocross, enduro and trail.\u003c\/p\u003e\u003ch2\u003eWho the grey Dual Axis suits\u003c\/h2\u003e\u003cp\u003eRiders who wear light or colourful kits often find all-black plates too heavy-looking at the knee. The grey colourway answers that without any change to function: same certification for knee and shin, same twin-pivot hinge, same slim shin plate and the same S\/M, L\/XL and XXL sizing as the black version.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eThe Dual Axis is heavier and bulkier than a soft knee sleeve, so check that it fits under your pants. It is certified at Level 1. Despite the hinges, it is a protector and not a knee brace; it gives no ligament support and does not limit hyperextension. Grey plates show dirt more readily than black ones, so expect to clean them more often if you want them to look fresh.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eThe grey and black colourway gives the Dual Axis a lighter, more technical appearance, which works well with light or multicoloured pants and kits. The grey plates make the shape of the guard more visible, while the black parts frame the hinges. Mud and dust show more on grey than on black, so a quick rinse after a wet ride keeps it looking sharp.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHard-shell knee and shin guard\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee and shin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e25 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHard shell over 3DF impact foam\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHinge\u003c\/td\u003e\n\u003ctd\u003eDual pivots on each side\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e50% polypropylene, 25% polyurethane, 15% nylon, 5% polyester, 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003eFrom 850 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eGrey\/Black\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Grey","offer_id":54033517674762,"sku":"5025202480","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Grey","offer_id":54033517707530,"sku":"5025202481","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Grey","offer_id":54033517740298,"sku":"5025202482","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-and-shin-guard-dual-axis-grey__4.png?v=1793445664"},{"product_id":"leatt-knee-and-shin-guard-dual-axis-pro-black","title":"Leatt Knee\u0026Shin Guard Dual Axis Pro – Unisex – Black","description":"\u003cp\u003eThe Leatt Dual Axis Pro takes its hinge idea from a knee brace. Inspired by Leatt's Z-Frame, it uses a geared pivot system that replicates the natural movement of the knee, and a metal outer cover reinforces that mechanism. Leatt calls it its most advanced hard-shell knee and shin guard.\u003c\/p\u003e\u003cp\u003eIt remains a protector, not a brace: knee and shin are CE certified as impact protection to EN 1621-1 Level 1. What the Pro adds over the standard Dual Axis is the geared hinge, rubberised inner hinge padding for grip and, according to Leatt, lower weight at 740 g per pair.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eGeared pivot system inspired by the Leatt Z-Frame knee brace\u003c\/li\u003e\n\u003cli\u003eKnee and shin certified to EN 1621-1 Level 1\u003c\/li\u003e\n\u003cli\u003eMetal outer cover reinforces the gear mechanism\u003c\/li\u003e\n\u003cli\u003eRubberised inner hinge padding for bike grip\u003c\/li\u003e\n\u003cli\u003eIntegrated FlexMesh construction for impact and slide protection\u003c\/li\u003e\n\u003cli\u003eVentilation ports in critical areas\u003c\/li\u003e\n\u003cli\u003eLeatt protection score of 25 points, 740 g per pair (manufacturer data)\u003c\/li\u003e\n\u003cli\u003eSlim, low-profile shin plate for boot fit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eThe geared hinge\u003c\/h2\u003e\u003cp\u003eInstead of simple pivot points, the Dual Axis Pro has toothed gears in the hinge, a principle Leatt borrowed from the Z-Frame knee brace. The gears keep the upper and lower parts moving in step, closely following the knee as it bends.\u003c\/p\u003e\u003cp\u003eOn the outside, a metal cover protects and reinforces the gear mechanism. Leatt says it also helps reduce lateral impact forces, the side hits that occur when the leg strikes the bike or the ground.\u003c\/p\u003e\u003ch2\u003eProtection and certification\u003c\/h2\u003e\u003cp\u003eKnee and shin are both CE tested and certified as impact protection to EN 1621-1 Level 1. The hard shell works with integrated FlexMesh construction for durable impact and slide protection, and soft moulded EVA lines the inside. Leatt rates the Pro at 25 points on its own scale, a manufacturer figure.\u003c\/p\u003e\u003ch2\u003eGrip and bike feel\u003c\/h2\u003e\u003cp\u003eThe inner side of the hinge, where it meets the bike, has rubberised padding. Leatt states this increases bike grip, so the guard helps rather than hinders when you squeeze the tank with your knees. The slim, low-profile build and shin plate allow a good fit inside boots.\u003c\/p\u003e\u003ch2\u003eMaterials and weight\u003c\/h2\u003e\u003cp\u003eLeatt's material data lists 50% polypropylene for the hard shell, 20% polyurethane for the impact foam, 15% nylon, 10% metal for the gear mechanism and 5% other components. Leatt gives the weight as 740 g per pair on its product page.\u003c\/p\u003e\u003ch2\u003eVentilation and sizes\u003c\/h2\u003e\u003cp\u003eVentilation ports in critical areas let air through the shell. Sizes are S\/M, L\/XL and XXL. Packaging is plastic-free.\u003c\/p\u003e\u003ch2\u003eBetween guard and brace\u003c\/h2\u003e\u003cp\u003eLeatt's data sheet places the Dual Axis Pro as a step between the standard Dual Axis guard and the Z-Frame knee brace. That describes its role well: more mechanical guidance at the hinge than a simple pivot guard, but without the medical certification, hyperextension stops and ligament claims of a brace.\u003c\/p\u003e\u003ch2\u003eWhat you should know\u003c\/h2\u003e\u003cp\u003eIt is bulkier than a soft knee sleeve. The weight differs between Leatt's sources: the product page says 740 g per pair, an older data sheet 940 g; we state the product page figure.\u003c\/p\u003e\u003ch2\u003eColour\u003c\/h2\u003e\u003cp\u003eBlack suits the Pro's technical character: the metal gear covers stand out as the only bright parts against the dark shell. Under pants of any colour, the guard leaves a clean, compact outline.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eHard-shell knee and shin guard with geared pivot\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCertification\u003c\/td\u003e\n\u003ctd\u003eEN 1621-1 Level 1 (knee and shin)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLeatt protection score\u003c\/td\u003e\n\u003ctd\u003e25 points (manufacturer rating)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHinge\u003c\/td\u003e\n\u003ctd\u003eGeared pivot, metal outer cover\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eHard shell, FlexMesh, soft moulded EVA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eInner hinge\u003c\/td\u003e\n\u003ctd\u003eRubberised padding for bike grip\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterials\u003c\/td\u003e\n\u003ctd\u003e50% polypropylene, 20% polyurethane, 15% nylon, 10% metal (gear mechanism), 5% other\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e740 g per pair (manufacturer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSizes\u003c\/td\u003e\n\u003ctd\u003eS\/M, L\/XL, XXL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBlack\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e","brand":"Leatt","offers":[{"title":"S\/M \/ Black","offer_id":54033518493962,"sku":"5024060790","price":159.95,"currency_code":"EUR","in_stock":true},{"title":"L\/XL \/ Black","offer_id":54033518526730,"sku":"5024060791","price":159.95,"currency_code":"EUR","in_stock":true},{"title":"XXL \/ Black","offer_id":54033518559498,"sku":"5024060792","price":159.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/leatt-knee-and-shin-guard-dual-axis-pro-black__2.png?v=1793445679"}],"url":"https:\/\/inter-pace.com\/en-ve\/collections\/offroad-protectors.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}