{"product_id":"zcoo-ex-race-front-brake-pads-ktm-990-duke","title":"ZCOO EX Race Front Brake Pads KTM 990 Duke (2024-2025) - Z-B002-EX","description":"\u003cp\u003eThe 990 Duke is a naked bike with almost nothing behind the rider, which means every hard stop transfers the entire machine onto the front tyre. The B002 is the tallest pad ZCOO makes at 55.0 mm, and that height is the point: more friction face in the direction the caliper actually loads it, on a bike that regularly asks the front brake to carry all of the weight and most of the rider.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e55.0 mm friction height - the tallest face in the ZCOO catalogue, over a 75.5 mm length and 8.5 mm thickness\u003c\/li\u003e\n\u003cli\u003eCeramic-sintered EX Race compound, proportional to lever pressure rather than sharp off the top\u003c\/li\u003e\n\u003cli\u003eFade resistance beyond 600 degrees Celsius, for the repeated full-load stops a big naked generates\u003c\/li\u003e\n\u003cli\u003eFour-block friction face keeps pressure even across the tall pad as it wears\u003c\/li\u003e\n\u003cli\u003eRotor-friendly ceramic formulation, in contrast to conventional sintered compounds\u003c\/li\u003e\n\u003cli\u003eOne pack per caliper; the 990 Duke has two front discs, so a full front-axle change takes two packs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eOkada Corporation sinters the ceramic friction layer onto a laser-cut metal plate and bonds the two with a process aimed at the failure mode that limits ordinary sintered pads: the friction layer coming away from the plate once the pad is repeatedly cycled through high temperature. On a tall pad like the B002 plate stiffness matters more than usual, because a plate that bows puts the load on the top and bottom edges instead of the whole face.\u003c\/p\u003e\u003ch2\u003ePerformance and Feel\u003c\/h2\u003e\u003cp\u003eThe EX Race mixture is ZCOO's control-oriented compound. Where the endurance-focused EXC version is built to give maximum bite from the first touch, EX is built so the force curve stays straight - useful on a light, short-wheelbase naked where a grabby pad is not just uncomfortable but genuinely destabilising. The compound also deposits a thin ceramic film on the rotor as it beds, which is why ZCOO can offer race-level heat resistance without the disc wear that usually accompanies it.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eListed by ZCOO for the KTM 990 Duke, model years 2024 and 2025. The same B002 shape covers a wide part of the KTM and Husqvarna range, including the 790 Duke, the 790 and 890 Adventure and the Svartpilen and Vitpilen models. Front axle only.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo ECE R90 type approval is documented for this pad. It appears neither in ZCOO's own catalogue nor on the European distributor's site, and no approval number is printed on the packaging data available to us. ZCOO itself describes the compound as suited to competition machines and road machines alike, but that is a description of the mixture, not a type approval. Until the distributor confirms an approval in writing, treat this as a track and competition part: in Germany a replacement brake pad without ECE R90 approval may not be fitted to a motorcycle used on public roads. Ask us before ordering if you need this clarified for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z-B002-EX (EAN 4950545750020)\u003c\/li\u003e\n\u003cli\u003ePad code: ZRM-B002C\u003c\/li\u003e\n\u003cli\u003eCompound: ZCOO EX Race - ceramic-sintered\u003c\/li\u003e\n\u003cli\u003ePad dimensions: 75.5 x 55.0 x 8.5 mm (L x H x thickness)\u003c\/li\u003e\n\u003cli\u003eCaliper family: Brembo\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle only\u003c\/li\u003e\n\u003cli\u003eFitment: KTM 990 DUKE, 2024-2025\u003c\/li\u003e\n\u003cli\u003eContents per pack: 1 set = 2 pads for one caliper; this machine needs two packs for the front axle\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ECE R90 type approval documented - track and competition use\u003c\/li\u003e\n\u003cli\u003eManufacturer: Okada Corporation, Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZCOO","offers":[{"title":"Default Title","offer_id":53637363040522,"sku":"Z-B002-EX","price":951000.0,"currency_code":"UZS","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/B002-produkt.png?v=1788768821","url":"https:\/\/inter-pace.com\/en-uz\/products\/zcoo-ex-race-front-brake-pads-ktm-990-duke","provider":"Inter-Pace","version":"1.0","type":"link"}