TGP MotoRacing FSS Fast Shift Sensor FSS-DUV4 for Ducati Panigale V4 360° — drag me
20 g
02 · Data & docs

The facts.

Technical data
BrandTGP MotoRacing / MCT Lohmann
Part numberFSS-DUV4
Sensor typeRe-programmable Hall sensor
Width14 mm
Weightapprox. 20 g
Push rod materialStainless steel (V2A) with bronze bush
HousingCNC-machined aluminium
Pre-tensioned travel± 3 mm / up to ± 25 kg
FitmentDucati Panigale V4 / V4S / V4R (2018–2024)
DescriptionThe whole story

Built to outlast the factory sensor on your Ducati Panigale V4, the FSS Fast Shift Sensor from MCT Lohmann — distributed exclusively through TGP MotoRacing — is engineered from the ground up with a stainless steel V2A push rod and bronze bush, materials chosen precisely because they maintain their integrity under the sustained heat loads that routinely defeat OEM quickshifter sensors. At just 14 mm wide and approximately 20 g, the CNC-machined housing is a study in purpose-built racing precision.

Key Features

  • Stainless steel V2A push rod with bronze bush — far more durable than original Ducati sensors, and fully serviceable after a crash
  • Absolute heat resistance means the sensor remains reliable even at extreme engine temperatures where OEM units fail
  • Micro-fine sensitivity for consistently clean, precise gear changes in both road and track conditions
  • Shift direction freely selectable — tension or compression — with two matching connection cables included in the box
  • Output signal configurable as normally open or normally closed (open collector), with a re-programmable Hall sensor for maximum flexibility
  • Pre-tensioned travel of ± 3 mm / up to ± 25 kg for precise actuation feel
  • Fully dismantleable construction — can typically be repaired rather than replaced following an incident

Materials and Build Quality

The FSS is where material selection becomes a competitive advantage. The V2A stainless steel push rod resists corrosion and fatigue far beyond what mild steel or alloy alternatives can offer, while the paired bronze bush provides the controlled, low-friction sliding action needed for repeatable Hall sensor triggering. The CNC-machined aluminium housing keeps the assembly to around 20 g without compromising rigidity — critical on a motorcycle where every component in the shift linkage contributes to the feel of the gear change.

Because the unit is fully dismantleable, a minor crash that bends a push rod is a repair job rather than a write-off. Replacement push rods and bushes can be fitted, making the FSS a genuinely long-term investment compared with sealed OEM sensors.

Performance on Road and Track

The re-programmable Hall sensor at the heart of the FSS allows the output to be set as a normally open or normally closed signal, meaning it integrates with the Panigale V4's existing quickshifter input without any signal-polarity compromise. Pre-tensioned spring travel of ± 3 mm and up to ± 25 kg actuation force gives the system the mechanical authority to reject false triggers from vibration while remaining responsive to genuine shift inputs — the balance that separates a race-grade sensor from a budget accessory. Part number FSS-DUV4 connects via M6 external / M6 internal threads as standard.

Fitment and Compatibility

The FSS Fast Shift Sensor (part number FSS-DUV4) is designed specifically for the following models:

  • Ducati Panigale V4 (2018–2024)
  • Ducati Panigale V4S (2018–2024)
  • Ducati Panigale V4R (2018–2024)

Multiple push rod length options are available to suit the Spider rearset, OE footpeg assembly, and custom linkage setups. Connections: M6 external / M6 internal (BMW applications: M6 external, M8 internal).

Specifications

  • Part number: FSS-DUV4
  • Width: 14 mm
  • Weight: approx. 20 g
  • Push rod material: stainless steel (V2A) with bronze bush
  • Housing: CNC-machined aluminium
  • Sensor type: re-programmable Hall sensor
  • Pre-tensioned travel: ± 3 mm / up to ± 25 kg
  • Output: normally open or normally closed (open collector), selectable
  • Shift direction: tension or compression, selectable
  • Thread connections: M6 external / M6 internal
  • Fitment: Ducati Panigale V4 / V4S / V4R, 2018–2024
FitmentWhich bikes this fits
  • Ducati Panigale V4 / V4S / V4R (2018–2024)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.