⟲ 360° — drag meThe facts.
| Brand | TGP MotoRacing |
|---|---|
| Product | Hyperdiscs Aluminium Clutch Plates |
| Fitment | BMW S1000RR K67 (2019–2026) |
| Outer diameter | Ø 133 mm |
| Material | Coated aluminium |
| Rotating mass saving | Up to 700 g versus standard steel plates |
| Variant 1 — OE clutch (AHK) | 9 plates: 8 x 2.3 mm + 1 x 2.3 mm | Total pack 48.7 mm | Clutch pack 20.7 mm |
| Variant 2 — STM / Suter clutch | 9 plates: 8 x 2.3 mm + 1 x 3.0 mm | Total clutch pack 21.4 mm |
| Intended use | Road and track |
DescriptionThe whole story▼
Rotational mass is one of the most impactful — and most overlooked — performance variables on a modern superbike. The TGP MotoRacing Hyperdiscs aluminium clutch plates are engineered to replace the standard steel intermediate plates in the BMW S1000RR K67 clutch pack, cutting rotating mass by up to 700 g and delivering a measurably sharper, more responsive drivetrain on both road and track.
Key Features
- Coated aluminium intermediate plates weigh approximately one third of the equivalent steel discs, reducing clutch pack rotating mass by up to 700 g
- Faster engine rev response and more direct throttle pickup thanks to dramatically reduced drivetrain inertia
- Improved corner entry: lower gyroscopic forces allow the S1000RR K67 to change direction with greater ease and accuracy
- Reduced rear wheel hop under hard downshifts — a direct result of lower rotational resistance in the clutch pack
- Enhanced heat dissipation through the aluminium material for consistent clutch feel under sustained high-load riding
- Available in two precisely specified variants to suit OE, STM, and Suter anti-hopping clutch configurations
Engineering the S1000RR K67 Clutch Pack
The BMW S1000RR K67 is a masterclass in electronics and chassis dynamics, but even its sophisticated traction control and engine-brake management systems can only work with the mechanical components they are given. Replacing the factory steel clutch plates with the TGP MotoRacing Hyperdiscs addresses a fundamental physical limit: spinning mass. The lighter the clutch pack, the faster the engine responds to throttle inputs, the lower the inertia that must be overcome during hard braking, and the more faithfully the K67's onboard electronics can translate rider intent into wheel behaviour.
The coated aluminium construction is not a compromise in durability. Each disc is produced to precise dimensional tolerances so that clutch pack stack height matches the OE specification for your chosen clutch system — critical for clean engagement, positive disengagement, and long service life. TGP MotoRacing recommend pairing the Hyperdiscs with new or near-new friction plates to build a clutch pack with a consistent biting point and maximum stability under race conditions.
Performance Benefits at the Limit
The tangible gains from lighter rotating mass become especially apparent when the S1000RR K67 is being ridden hard. Faster acceleration out of corners results from the reduced inertia the drivetrain must overcome on corner exit. Improved turn-in characteristics follow from reduced gyroscopic forces. Less rear-wheel chatter under aggressive downshifting makes the chassis more settled entering corners. And because aluminium dissipates heat more efficiently than steel, the clutch feel remains consistent even after repeated hard laps — a meaningful advantage during track days or endurance stints.
When combined with the K67's advanced cornering ABS, traction control, and engine-brake systems, the Hyperdiscs allow those electronics to work with a drivetrain that reacts more quickly and more predictably. The result is cleaner, more confident riding at the limit.
Variant Selection — Important Note
Two variants are available for the BMW S1000RR K67, each engineered to the precise stack height required by a specific clutch system. Select the correct variant for your installed clutch — using the wrong pack thickness will compromise clutch function and disengagement quality.
Variant 1 — OE Standard Clutch (AHK)
Scope of delivery: 9 aluminium intermediate plates. Configuration: 8 x 2.3 mm + 1 x 2.3 mm. Total pack thickness: 48.7 mm. Clutch pack: 20.7 mm.
Variant 2 — STM or Suter Anti-Hopping Clutch
Configuration: 8 x 2.3 mm + 1 x 3.0 mm. Total clutch pack thickness: 21.4 mm. Compatible with STM and Suter anti-hopping clutch systems.
Fitment and Compatibility
- BMW S1000RR K67 — model years 2019 to 2026
- Outer diameter: Ø 133 mm
- Variant 1 suits the OE standard anti-hopping clutch (AHK)
- Variant 2 suits STM or Suter aftermarket anti-hopping clutches
Specifications
| Specification | Detail |
|---|---|
| Brand | TGP MotoRacing |
| Product | Hyperdiscs Aluminium Clutch Plates |
| Fitment | BMW S1000RR K67 (2019–2026) |
| Outer diameter | Ø 133 mm |
| Variant 1 configuration | 9 plates: 8 x 2.3 mm + 1 x 2.3 mm, total pack 48.7 mm, clutch pack 20.7 mm |
| Variant 2 configuration | 9 plates: 8 x 2.3 mm + 1 x 3.0 mm, total clutch pack 21.4 mm |
| Material | Coated aluminium |
| Rotating mass saving | Up to 700 g versus standard steel plates |
| Intended use | Road and track |
FitmentWhich bikes this fits▼
- BMW S1000RR K67 (2019–2026)
Questions, one topic at a time.
Get the real shipping cost for this item to your address — the same rates as checkout.
Choose a destination and hit Estimate — we fetch the live rates for this item.
We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.
Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.
Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.
Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.
As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.
On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.
You have the right to cancel within 14 days of receiving your order. Register your return by email first; once it’s approved you have a further 14 days to send the goods back. Items should be unused and in their original packaging.
Register your return by email with your order number before sending anything back, and we’ll send you the return instructions. Please note: returns that aren’t registered in advance can’t be accepted.
The quickest way is to place a new order for the size you need and register a return for the original by email — just let us know it’s an exchange.
We’re sorry — that shouldn’t happen. Contact us with your order number and a photo as soon as you can, and we’ll arrange a replacement or refund right away. Faulty goods are always covered by your statutory warranty.
Refunds go back to your original payment method, usually within 3–5 working days of your return reaching our warehouse.
PayPal, all major credit and debit cards (Visa, Mastercard, American Express), Klarna (pay later and instalments), Apple Pay, Google Pay and more — all processed securely via PayPal and Mollie.
Yes. Choose Klarna at checkout to split your purchase into flexible monthly installments.
Your payment is taken when you place your order. If you choose Klarna, you pay later according to Klarna’s terms.
Every payment runs over an SSL-encrypted connection through certified providers. We never see or store your full card details.
If your order hasn’t shipped yet, contact us as soon as possible and we’ll do our best to change or cancel it.
No — you can check out as a guest. An account simply lets you track orders and reorder faster.
For customers in the EU, prices are shown including your country’s local VAT. For customers outside the EU, prices are shown without VAT — instead, your country’s import taxes and duties may apply on delivery (see the customs question).
Yes. Your invoice is attached to your order confirmation email and is also available in your account.
Yes. We’re an authorised dealer, so every product is 100% original and comes with the full manufacturer warranty.
Yes. Everything we sell is genuine and comes with the manufacturer’s warranty, on top of your statutory rights. Keep your invoice as proof of purchase and contact us if you ever need to make a claim — we’ll help you through it.
Our team is happy to help. Use the contact button below and we’ll personally help you choose the right gear or part.
Measure your head circumference about one centimetre above your eyebrows and compare it with the size chart on this page. Between sizes? Choose the smaller one — the padding beds in with use.
Yes — it’s tested and approved to the current ECE 22.06 standard and road-legal across the EU.
Most of our touring and sport helmets are Pinlock-ready and many include the insert. Check the ‘What’s in the box’ section on this page for this model.
Yes — the cheek pads are channelled so the arms of your glasses slide in comfortably.
Take out the washable lining and hand-wash it in lukewarm water. Clean the shell and visor with a soft cloth and water only — never solvents.
Our team will personally help you choose the right gear or part — around 24h for a reply.