{"product_id":"ohlins-shock-spring-40-n-mm-300-mm-70-mm-06774-07","title":"Öhlins Shock Spring 40 N\/mm \/ 300 mm \/ Ø 70 mm – 06774-07","description":"\u003cp\u003eÖhlins part number 06774-07 is a shock absorber spring rated at 40 N\/mm, 300 mm long with a 70 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eInner diameter 70 mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eFree length 300 mm\u003c\/li\u003e\n\u003cli\u003e182 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 40 N\/mm\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 06774-07\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eProduction is Öhlins' own in Sweden, and the tolerance on the rate is what separates these from a generic replacement. Öhlins manufactures in Upplands Väsby, north of Stockholm, and assembles and tests every unit there before it ships. Seals are specified for temperature stability rather than for the lowest unit cost.\u003c\/p\u003e\u003ch2\u003eSize and Rate\u003c\/h2\u003e\u003cp\u003eÖhlins holds the free length at 300 mm and the inner diameter at 70 mm across this rate range, so moving up or down a rate changes nothing about the installation.\u003c\/p\u003e\u003ch2\u003eWhere This Rate Belongs\u003c\/h2\u003e\u003cp\u003eA middle rate balances support against compliance, which is why Öhlins uses it as the baseline. A mid rate balances support under braking against compliance over the surface, which is why it is the usual starting point. Mid rates suit a solo rider on a road-going machine with occasional spirited use. A road machine spends most of its life in the first third of the fork's travel — that is the part the rate governs.\u003c\/p\u003e\u003ch2\u003eRate and the Linkage\u003c\/h2\u003e\u003cp\u003eA rear spring is the cheapest part of the suspension and the one that decides the most. A spring that has settled in service sits shorter than new, which quietly lowers the bike and steepens the steering. Rear spring rate sets ride height and static sag, and those two decide the chassis attitude before any damping click matters.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eÖhlins offers rates in defined steps so a change can be made in one direction at a time rather than by guesswork. Ask us with the machine and rider weight and we will tell you which rate in this size to take. Nothing about the installation changes across a rate range: the mounting, the length and the bore stay the same.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eCheck the free length against the old springs before fitting — a sagged original often measures short. Fork oil should be replaced at the same time — it is already out of the leg. A spring that is the correct length still needs the preload spacer checked, since installed length is what sets sag.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eÖhlins components deliver what they promise once they are fitted and set up properly. As an authorised Öhlins service centre we do exactly that in house — installation, service and setup. Simply ask if you would like us to take care of it.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 06774-07\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 40 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 300 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 70 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 182 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645369311498,"sku":"06774-07","price":535000.0,"currency_code":"UGX","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_bf408ec0-da24-4b69-aeb1-269a3123f418.png?v=1788866818","url":"https:\/\/inter-pace.com\/en-ug\/products\/ohlins-shock-spring-40-n-mm-300-mm-70-mm-06774-07","provider":"Inter-Pace","version":"1.0","type":"link"}