LS2 FF902 Scope II Solid Matt Black – Modular Touring Helmet ECE 22.06 P/J

Matt black is the default, and the reason is not fashion — it is that a matt black helmet never clashes with anything and never dates. On this helmet it also does something specific: without highlights running along the shell, the seam between chin bar and upper shell effectively disappears, and a modular that reads as one piece is rarer than it should be.

Three shells for seven sizes

Three shell sizes cover XS to 3XL. What that buys, beyond weight, is proportion. A helmet is one of the few things a rider wears that is seen head-on by everyone else, and a small head inside a shell moulded for a medium reads unmistakably as too big. The three-tool approach keeps an XS looking like an XS. It is a cosmetic argument, but it is the one riders at the small end of the range actually raise.

About the matt black finish

Matt black absorbs light rather than bouncing it, and that one property drives everything else about living with it. Scratches effectively vanish, because there is no gloss layer for them to catch in — which makes it the most forgiving finish here on a helmet that spends its life being set down on tank bags, café tables and pillion seats. It is also the least conspicuous, and that cuts both ways: understated on the bike, and genuinely harder for a driver to pick out at dusk than the white version on this same page. If you ride a lot in poor light that is a real consideration, and it is the argument for the reflective stickers in the box. Two more honest notes: matt black shows dust and dried water spots sooner than any other finish, and a black shell runs hotter in direct sun.

HPTT: what the shell actually is

HPTT belongs to the same family of materials LS2 uses across its volume helmets, including the FF820 Rapid III. The comparison is instructive: the same class of shell in a full-face weighs 1350 g, and here it weighs 1750 g. That four-hundred-gram difference is not the material. It is the chin bar, the pivots, the locking hardware and the reinforcement that a modular needs to pass a chin impact.

Ninety degrees, not one hundred and eighty

The bar releases from a single central catch under the chin, which is deliberate: a two-handed release on a modular is a design failure, because the situations where you want the helmet open — a fuel pump, a ticket machine, a traffic light — are exactly the ones where one hand is busy. Lift until it clicks at the top, and it stays there without being held.

What ECE 22.06 and the P/J label actually mean

Most shops leave the homologation as a line in a table. Here is what it actually cost the manufacturer. Under 22.06 the shell is struck at up to eighteen points instead of five, at more than one speed, and then dropped onto an anvil set at an angle and faced with abrasive paper so the laboratory can measure rotation as well as deceleration.

The P and the J are separate certifications on the same shell. P covers the closed configuration including chin impacts; J covers the open one. Both had to be earned, which on a modular means the chin-bar latch has to survive an impact regime the old standard never applied to it.

Where it sits — and what SHARP actually tested

Read the table below with one question in mind: what does an extra hundred and twenty euros buy? The answer between this row and the next is a KPA shell instead of HPTT and a chin bar that rotates 180° instead of 90°. Not a sun visor, not a Pinlock, not an emergency release — those are on both.

And the test question. SHARP rated an FF902 Scope at three stars in May 2022. That helmet was homologated to ECE 22.05, weighed 1.65 kg and came in six sizes. The Scope II is a different helmet under a different standard, and 22.06 changed what is tested rather than merely how strictly. We leave the stars with the model that earned them.

COOLMAX, and where the air goes

The part of the interior you will actually think about is the cheek pads, and this is where COOLMAX earns its place. Cheek pads take the most sweat and the most friction of anything in a helmet, and a fabric that moves moisture out and spreads it to dry is the difference between a liner that smells after one summer and one that does not. It is also, being laser-cut, shaped with different foam densities across a single pad.

Airflow: chin and front intakes, channels through the multi-density EPS, exhaust port at the rear. All of it removable and machine-washable when the season is over.

The visor, the sun visor and the Pinlock in the box

The internal sun visor is operated by a lever on the side of the shell and drops into place in one movement. It is the feature that turns a modular helmet into something you can ride all day: no swapping screens at a service station, no carrying a second visor, no compromise between a tinted screen you cannot use after dark and a clear one that leaves you squinting.

Getting the helmet off a fallen rider

The chin strap is reinforced, and on a modular helmet that is not decoration. Everything that holds the helmet on in a crash passes through the strap and its anchor points, and a flip-up puts more hardware between the shell and the strap than a full-face does. Reinforcement here is what keeps the load path short.

1750 grams, noise, and the rest of the honest list

Being straight about the weight, because it is the specification that decides whether this is the right helmet for you. 1750 g (±50) is a third again on top of a five-kilo head, and every expansion joint multiplies the total through the muscles at the back of your neck. The first hour feels like any other helmet. The fifth does not. Riders who commute will never notice; riders who tour will.

The other two honest notes: SHARP has not tested this generation, and the supplied Pinlock is a 70 rather than an XLT — marginally less light transmission at night. Noise has no published figure and we will not guess one.

When something wears out

Two parts of the chin-bar mechanism are available separately, and knowing which is which saves money. The ratchet system is the mechanism itself; the ratchet system cover is the trim over it. A bar that has become stiff or notchy usually needs the first. A cover that has been scraped in a drop needs only the second.

In the box

• LS2 FF902 Scope II helmet — Solid Matt Black
• Carrying bag
• Pinlock® 70 MaxVision™ anti-fog insert (DKS260)
• Reflective stickers

Specification

• Model — LS2 FF902 Scope II
• Part number — 569021011
• Colour — Solid Matt Black — Matt black
• Homologation — ECE 22.06, dual P/J (protective and jet)
• Helmet type — Flip-up / modular, chin bar raising 90° with a redesigned locking system
• Shell — HPTT thermoplastic, three shell sizes (XS–S / M–L / XL–3XL)
• Weight — 1750 g (±50 g)
• Sizes — XS to 3XL (seven sizes)
• Visor — scratch-resistant, UV-stable, quick-release system
• Anti-fog — Pinlock® 70 MaxVision™ (DKS260) supplied
• Sun visor — integrated, tinted, drop-down
• Impact liner — multi-density EPS with moulded ventilation channels
• Retention — micrometric ratchet buckle, reinforced chin strap, emergency release system
• Ventilation — chin intake, front intake, rear exhaust port
• Liner — COOLMAX®, laser-cut foam, hypoallergenic, removable and washable
• Intercom — prepared for the current LS2 Bluetooth system