Accossato clutch master cylinder cover FP007 for Ducati MULTISTRADA 1200 ENDURO (2016-2018)⟲ 360° — drag me
02 · Data & docs

The facts.

Technical data
BrandAccossato
TypeClutch master cylinder reservoir cover
Part numberFP007
PositionClutch master cylinder
MaterialCNC-machined aluminium, anodised
ColoursBlack, silver, red, blue, gold, orange
FitmentDucati MULTISTRADA 1200 ENDURO (2016–2018)
Road approvalNone documented, track use only
CheckCompare with the original cap before ordering
DescriptionThe whole story▼

Ducati built the Multistrada 1200 Enduro for riders who leave the tarmac on purpose, giving it spoked wheels, longer suspension travel and a larger fuel tank than the road-going Multistrada. On loose ground, even skilled riders put a big adventure bike on its side sooner or later, usually at walking pace, on a slope or in a rut. The bike is lifted, the dust brushed off, and the ride goes on. Accossato lists the FP007 for this Enduro from 2016 to 2018: an aluminium cover for the clutch master cylinder reservoir.

Key Features

  • Clutch master cylinder cover for the Ducati Multistrada 1200 Enduro, 2016 to 2018
  • Enduro Touring included on Accossato's list
  • Designed for the original clutch master cylinder
  • CNC-machined aluminium, anodised
  • Six colours: black, silver, gold, red, orange, blue
  • TS003 front reservoir cap also listed for this bike
  • No German ABE on record; for track use

Construction and Material Quality

The FP007 starts as aluminium, is machined on CNC equipment and is then anodised in black, silver, gold, red, orange or blue. Accossato shapes it for the original clutch master cylinders of the listed bikes, so on the Multistrada 1200 Enduro the reservoir stays standard and only its lid changes. Before closing the reservoir with the new cover, examine the seal beneath the old one. A dusty, well-used bike often has one that has hardened, and this is the moment to replace it.

After the Bike Has Been on Its Side

A slow fall rarely does much damage, but the left end of the handlebar is where a tipped-over Multistrada 1200 Enduro often lands, and the clutch master cylinder sits right there. Once the bike is upright again, take a minute before riding on. Look at the lever: is it bent, does it still move freely and spring back by itself? Look at the reservoir and its cover: is anything cracked, is there fluid on the outside? Pull the lever and feel whether the bite point is where it was. If the level has dropped or the lever feels spongy, ride carefully to the nearest place where it can be put right instead of pressing on into remote country. Back home, clean the area thoroughly before opening anything, since dust and grit must stay out of the fluid. If you fit the FP007 then, turn the bars until the reservoir is level, protect the tank and plastics from drips, rinse any spill off with water immediately and leave the reservoir open only briefly. Check the level against the marks, fasten the cover gently and operate the lever several times with the engine off before the next ride.

Fitment and Compatibility

The Multistrada 1200 Enduro and the Enduro Touring of 2016 to 2018 are named on Accossato's list for the FP007, which closes the reservoir of the original clutch master cylinder. At Inter-Pace the same part is also listed for the Multistrada 1260 Enduro, the Diavel and the Hypermotard 950. For the Enduro, Accossato additionally makes the TS003 front brake fluid reservoir cap, available in the same six colours and in green. Check your bike against the application list before ordering.

Road Approval

We have no ABE or test documents for the FP007, which is why it is listed for track and competition use.

Scope of Delivery

One FP007 clutch reservoir cover in the colour you order.

Specifications

  • Type: Clutch master cylinder reservoir cover
  • Part number: FP007
  • Position: Clutch master cylinder
  • Material: CNC-machined aluminium, anodised
  • Colours: Black, silver, red, blue, gold, orange
  • Fitment: Ducati MULTISTRADA 1200 ENDURO (2016–2018)
  • Road approval: None documented, track use only
  • Check: Compare with the original cap before ordering
What's includedEverything in the box▼
  • 1x Accossato clutch master cylinder cover
FitmentWhich bikes this fits▼
  • Ducati MULTISTRADA 1200 ENDURO (2016–2018)
  • Aprilia CAPONORD 1200 (2013–2016)
  • Aprilia DORSODURO 1200 (2010–2016)
  • Ducati DIAVEL (2011–2017)
  • Ducati HYPERMOTARD 950 (2019)
  • Ducati MONSTER 1200 (2014–2020)
  • Ducati MONSTER 1200 R (2016–2019)
  • Ducati MONSTER 1200 S (2014–2020)
  • Ducati MULTISTRADA 1200 (2010–2017)
  • Ducati MULTISTRADA 1200 S (2010–2017)
  • Ducati MULTISTRADA 1260 (2018–2020)
  • Ducati MULTISTRADA 1260 ENDURO (2019–2020)
  • Ducati MULTISTRADA 1260 S (2018–2020)
  • Ducati MULTISTRADA 1260 S D AIR (2018–2020)
  • Ducati MULTISTRADA 950 (2019–2020)
  • Ducati Panigale 1199 S (2012–2015)
  • Ducati Panigale 899 (2014–2015)
  • Ducati Panigale 959 (2017–2019)
  • Ducati Panigale V4 (2018–2019)
  • Ducati Panigale V4 R (2019)
  • Ducati Panigale V4 S (2018–2019)
07 · Support

Questions, one topic at a time.

Estimate your shipping

Get the real shipping cost for this item to your address — the same rates as checkout.

Pick your countrySame rates as checkout

Choose a destination and hit Estimate — we fetch the live rates for this item.

How long does delivery take?

We’re based in Germany. Standard delivery goes by DHL and national postal services and takes about 2–5 days within Germany, 1–2 weeks within the EU and 2–6 weeks outside the EU. Need it sooner? Express delivery reaches most of the world within a few days — just choose it at checkout where available.

How much does shipping cost?

Your exact shipping cost is calculated by destination and weight and shown at checkout before you pay — no hidden fees. Express delivery is selectable at checkout where available.

Do you ship to my country?

Yes, we ship to over 130 countries. Prices, taxes and delivery times for your destination are calculated automatically at checkout.

Will I have to pay customs or import duties?

Within the EU, no — our prices already include all duties and EU VAT. For deliveries outside the EU (e.g. Switzerland, the UK or the USA), your order may be subject to import duties and taxes set by your country. These are collected by the carrier when your parcel arrives, aren’t included in our prices, and are outside our control.

How can I track my order?

As soon as your parcel ships we email you a tracking link, so you can follow it all the way to your door.

What if an item is out of stock?

On out-of-stock items you can request a delivery time or leave your email to be notified the moment it returns — just use the notification box on the product.

Didn’t find your answer?

Our team will personally help you choose the right gear or part — around 24h for a reply.