{"product_id":"ohlins-shock-spring-60-n-mm-215-mm-61-mm-06320-14","title":"Öhlins Shock Spring 60 N\/mm \/ 215 mm \/ Ø 61 mm – 06320-14","description":"\u003cp\u003eÖhlins part number 06320-14 is a shock absorber spring rated at 60 N\/mm, 215 mm long with a 61 mm inner diameter. Rear spring rate sets ride height, static sag and how much of the damper's stroke is actually usable.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eÖhlins part number 06320-14\u003c\/li\u003e\n\u003cli\u003e120 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003cli\u003eFree length 215 mm\u003c\/li\u003e\n\u003cli\u003eInner diameter 61 mm\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 60 N\/mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eManufacture and Tolerance\u003c\/h2\u003e\u003cp\u003eThe finish is applied after setting, which means the coating does not affect the rate. Öhlins manufactures in Upplands Väsby, north of Stockholm, and assembles and tests every unit there before it ships. Production is Öhlins' own in Sweden, and the tolerance on the rate is what separates these from a generic replacement.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eThe 61 mm bore and 215 mm length are the two figures that decide whether it physically fits; 60 N\/mm decides whether it suits the rider.\u003c\/p\u003e\u003ch2\u003eWhat This Rate Does\u003c\/h2\u003e\u003cp\u003eA firm rate holds the chassis attitude when the front or rear is loaded hard. Heavier riders, two-up use and track days all push the choice towards this end. Firm rates trade some small-bump comfort for support — the right trade on a good surface at speed. Road surfaces are the hardest test of a spring rate, because the fork has to cope with both a smooth stretch and a broken one.\u003c\/p\u003e\u003ch2\u003eWhat the Rear Spring Decides\u003c\/h2\u003e\u003cp\u003eProgressive springs change rate through the stroke, which suits machines with little travel and a lot of load. Adding a pillion or luggage changes the rear load enough that the standard rate stops working properly. A rear spring is the cheapest part of the suspension and the one that decides the most.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eA spring is one of the few suspension parts that is genuinely interchangeable: same bore, same free length, and it goes in. The safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload. This spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into.\u003c\/p\u003e\u003ch2\u003eInstallation\u003c\/h2\u003e\u003cp\u003eThe job needs no special tools beyond a fork spring compressor and a measuring rod for the oil level. Spring preload spacers may need adjusting to keep the installed length correct. Springs are supplied ready to fit; no cutting, grinding or packing is needed.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: a spring is a like-for-like replacement of a wear part and carries no separate type approval. Where Öhlins states an approval for a particular motorcycle, it is named under Applications.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eWe are an authorised Öhlins service centre, so the installation does not have to be your problem: we fit and set up Öhlins components in our own workshop. Ask us when you order and we will include the work.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 06320-14\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 60 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 215 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 61 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 120 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645361971466,"sku":"06320-14","price":3475.0,"currency_code":"THB","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_753a8d06-a191-415b-8a92-eb722406320a.png?v=1788866767","url":"https:\/\/inter-pace.com\/en-th\/products\/ohlins-shock-spring-60-n-mm-215-mm-61-mm-06320-14","provider":"Inter-Pace","version":"1.0","type":"link"}