{"title":"Wheels","description":null,"products":[{"product_id":"oz-cattiva-magnesium-set-aprilia-rsv4-09-16","title":"OZ Cattiva Forged Magnesium Wheel Set for Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016)","description":"\u003cp\u003eForged from premium magnesium by OZ's SBK Racing division, the Cattiva wheel set is the lightest wheel OZ produces — and every gram saved in rotating mass translates directly into faster steering, sharper turn-in and a more responsive ride on the circuit. Designed exclusively for track use on the Aprilia RSV4 in all its variants from 2009 to 2016, this is a component that redefines what a high-performance wheel set can be.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest material in the OZ range, offering an exceptional strength-to-weight ratio that outperforms aluminium alternatives.\u003c\/li\u003e\n\u003cli\u003eDramatically reduced rotating mass for noticeably improved agility, quicker direction changes and faster throttle response out of corners.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set, supplied with premium bearings, aluminium angle-stem valves and spacers where required.\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included in the set — note that the original Aprilia sprocket carrier is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDeveloped specifically for track use by OZ's racing engineers, delivering maximum structural integrity and stability at racing speeds.\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the standard wheels on the Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016) — no modifications required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting motorsport standards, combining race-proven design with meticulous craftsmanship.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe Cattiva takes its name from OZ's SBK Racing programme, and the pedigree shows in every detail of its construction. Forged magnesium is a material reserved for the upper echelon of motorsport wheel manufacturing — it is stiffer, lighter and more vibration-damping than cast aluminium, and it demands far greater precision at every stage of the forging and finishing process. OZ's Italian facility applies the same tolerances here as it does for factory racing teams, resulting in a wheel that meets the demands of sustained, high-intensity track sessions without compromise.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the most effective ways to sharpen a motorcycle's dynamic behaviour. With the Cattiva set fitted, the RSV4's suspension can react more quickly to surface changes, braking distances shorten and the chassis feels more eager to change direction. Riders stepping up their track programme will notice the difference from the first session: the bike responds with a precision that heavier factory wheels simply cannot match. The Cattiva is conceived for maximum performance and maximum enjoyment at the limit.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered as a direct replacement for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 Factory (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009–2016)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: the original Aprilia rear sprocket carrier is not compatible with the Cattiva wheel set. The required sprocket carrier is included in the delivery. Always verify fitment against your specific model year before ordering.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged magnesium\u003c\/li\u003e\n\u003cli\u003eContents: Front wheel, rear wheel, bearings, aluminium angle-stem valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016)\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ racing\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167397306634,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167397339402,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167397372170,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy.png?v=1780796959"},{"product_id":"oz-cattiva-magnesium-set-aprilia-rsv4-17-20","title":"OZ Cattiva Magnesium Wheel Set for Aprilia RSV4 \/ RSV4 1100 Factory \/ RF \/ RR (2017–2020)","description":"\u003cp\u003eForged from high-strength magnesium by OZ's SBK Racing division, the Cattiva wheel set represents the pinnacle of Italian wheel engineering for the Aprilia RSV4 platform. Every gram saved in rotating mass translates directly into sharper turn-in, faster acceleration response and more precise cornering — qualities the RSV4 was built to exploit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheels OZ produces, delivering a dramatic reduction in unsprung and rotating mass\u003c\/li\u003e\n\u003cli\u003eDeveloped by the OZ SBK Racing department for track-focused performance, with all the structural integrity that demands\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set included, with premium-grade bearings and aluminium angled valves supplied as standard\u003c\/li\u003e\n\u003cli\u003eDirect-fit replacement for Aprilia RSV4, RSV4 1100 Factory, RSV4 RF and RSV4 RR (2017–2020) — no modifications required\u003c\/li\u003e\n\u003cli\u003eMade in Italy, with OZ's signature attention to dimensional accuracy and surface finish\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEngineering Behind the Cattiva\u003c\/h2\u003e\u003cp\u003eThe Cattiva name carries genuine racing pedigree. Where cast aluminium wheels rely on bulk to achieve structural rigidity, the Cattiva's forged magnesium process aligns the grain structure of the material under immense pressure, producing a wheel that is simultaneously lighter and stronger. The result is a set that shaves meaningful rotating mass compared with OEM wheels — mass that the RSV4's engine no longer has to fight to accelerate, decelerate or change direction.\u003c\/p\u003e\u003cp\u003eOn track, the difference is felt immediately. Steering response quickens, mid-corner balance improves and braking stability tightens. The reduction in gyroscopic effect also makes direction changes between apexes more natural and less fatiguing over a full session.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eThe Cattiva set is available in gloss black, matte black and gold — each finish applied with the same rigorous standards OZ applies to its World Superbike and MotoGP programme wheels. The Cattiva's spoke geometry is the product of finite-element analysis, optimising stiffness distribution without adding unnecessary material. Bearings are selected to handle the lateral and radial loads generated under hard track use, and the included aluminium angled valves ensure reliable tyre inflation even with low-profile racing rubber fitted.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered as a direct replacement for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eInstallation is straightforward with standard workshop tools. Always fit new tyres and have wheel balance checked after installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged magnesium\u003c\/li\u003e\n\u003cli\u003eManufacturing origin: Italy\u003c\/li\u003e\n\u003cli\u003eScope of delivery: Front wheel, rear wheel, bearings, aluminium angled valves\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 1100 Factory \/ RSV4 RF \/ RSV4 RR, model years 2017–2020\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ road performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167397404938,"sku":"C3065AP35X+C6095AP60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167397437706,"sku":"C3065AP35X+C6095AP60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167397470474,"sku":"C3065AP35X+C6095AP60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_68259a7f-1ad6-4621-83ad-61ab88316138.png?v=1780796961"},{"product_id":"oz-cattiva-magnesium-felgen-set-aprilia-rsv4-rr-1100-factory-21","title":"OZ Cattiva Magnesium Wheel Set – Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026)","description":"\u003cp\u003eBorn on the Superbike grid and refined in OZ's SBK Racing division, the Cattiva is the lightest wheel OZ produces — forged from high-strength magnesium and engineered exclusively for track use. Fitted to the Aprilia RSV4, RR or 1100 Factory, this wheel set delivers a dramatic reduction in rotating mass that sharpens turn-in, improves mid-corner agility and reduces the gyroscopic load your suspension has to manage at every apex.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged from high-strength magnesium — the lightest wheel in the entire OZ range, designed from the outset for Superbike racing demands.\u003c\/li\u003e\n\u003cli\u003eDrastically reduced rotating mass improves steering response, acceleration out of corners and overall chassis agility on circuit.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set supplied with premium bearings, aluminium angle valves and spacers (fitted as required).\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — note that the original Aprilia sprocket carrier is not compatible and must be replaced with the supplied unit.\u003c\/li\u003e\n\u003cli\u003eDirect, bolt-on replacement for the factory wheels on Aprilia RSV4, RR and 1100 Factory models from 2021 to 2026.\u003c\/li\u003e\n\u003cli\u003eMade in Italy by OZ's SBK Racing department — the same manufacturer supplying wheels to factory World Superbike teams.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering\u003c\/h2\u003e\u003cp\u003eThe Cattiva design was not adapted from a road wheel — it was conceived by OZ's SBK Racing department with a single priority: maximum performance on circuit. Forged magnesium offers an exceptional strength-to-weight ratio that cast or forged aluminium cannot match at equivalent rim dimensions. The result is a wheel that responds to throttle and braking inputs with greater immediacy, letting the Aprilia RSV4's chassis work as its engineers intended when lap times matter most.\u003c\/p\u003e\u003cp\u003eBecause rotating unsprung mass affects every dynamic the rider feels — from initial turn-in to mid-corner balance to drive off the exit — the weight reduction delivered by the Cattiva translates directly into measurable improvements in handling feel and rider confidence at the limit.\u003c\/p\u003e\u003ch2\u003eWhat Is Included\u003c\/h2\u003e\u003cp\u003eEach set comprises a matched front and rear Cattiva magnesium wheel, a sprocket carrier, premium wheel bearings, aluminium angle valves and any spacers required for fitment. The original Aprilia rear sprocket carrier must be replaced with the included unit; the standard sprocket itself is not compatible.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a confirmed direct-fit replacement for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese wheels are designed and approved for track use only and are not intended for road use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eContents: front wheel, rear wheel, sprocket carrier, bearings, aluminium angle valves, spacers\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ racing only\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RR \/ RF \/ 1100 \/ 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167397503242,"sku":"C3065AP35X+C6095AP60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167397536010,"sku":"C3065AP35X+C6095AP60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167397568778,"sku":"C3065AP35X+C6095AP60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_5bd191d8-cd1f-4436-8507-584f1af35f04.png?v=1780796963"},{"product_id":"oz-cattiva-magnesium-felgen-set-bmw-s1000rr-k46-hp-aufnahme","title":"OZ Cattiva Magnesium Wheel Set BMW S1000RR K46 HP Fitment (2009-2018)","description":"\u003cp\u003eDeveloped by the OZ SBK Racing department and forged from premium magnesium, the Cattiva is the lightest wheel OZ produces — purpose-built for track use and engineered to meet the uncompromising safety demands of racing. Specified here for the BMW S1000RR K46 with HP fitment (2009-2018), this complete front and rear set delivers a measurable reduction in rotating mass that transforms the character of the S1000RR on circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged from high-grade magnesium — the lightest wheel in the entire OZ range, designed exclusively for track use where weight reduction is paramount.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by OZ's SBK Racing division, delivering sharper turn-in, improved agility and greater stability at speed.\u003c\/li\u003e\n\u003cli\u003eSignificant reduction in unsprung and rotating mass for noticeably faster steering responses and enhanced suspension compliance.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel and one rear wheel, supplied with quality bearings, aluminium angle valves and spacers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — note that the original rear sprocket is not compatible and must be replaced accordingly.\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the factory wheels on BMW S1000RR K46 models equipped with HP forged wheel fitment (2009-2018).\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for race-proven reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Engineering\u003c\/h2\u003e\u003cp\u003eThe Cattiva's racing lineage sets it apart from road-oriented forged aluminium wheels. Magnesium alloy offers a superior strength-to-weight ratio compared to aluminium, and OZ's forging process ensures structural integrity under the lateral loads, braking forces and thermal cycling typical of competitive track use. The six-spoke geometry is not simply aesthetic — it was refined in the SBK paddock to optimise stiffness distribution across the rim, keeping the tyre contact patch consistent through corner entry and drive phases at the limit.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed specifically for the BMW S1000RR K46 equipped with HP forged wheel hubs (2009-2018). It is not compatible with standard, non-HP fitment S1000RR variants. Please confirm your motorcycle carries the HP forged wheel option before ordering. The original rear sprocket does not fit the supplied sprocket carrier; a compatible replacement sprocket must be sourced separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003ePart numbers: C3130BM35X (front) + C6094BM60X (rear)\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eDesign: 6-spoke\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 with HP forged wheel hub, model years 2009-2018\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, quality bearings, aluminium angle valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167397863690,"sku":"C3130BM35X+C6094BM60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167397896458,"sku":"C3130BM35X+C6094BM60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167397929226,"sku":"C3130BM35X+C6094BM60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_4cc6c890-bddf-465c-b9c8-72f0e230b50b.png?v=1780796970"},{"product_id":"oz-cattiva-magnesium-felgen-set-bmw-s1000rr-k46","title":"OZ Cattiva Magnesium Wheel Set for BMW S1000RR K46 (2009–2018)","description":"\u003cp\u003eThe OZ Cattiva wheel set brings genuine race-department engineering to everyday track day riders who want meaningful performance gains without compromise. Developed by OZ's Superbike Racing division and forged from high-grade magnesium, the Cattiva is the lightest wheel OZ produces — and on the BMW S1000RR K46, that reduction in unsprung and rotating mass translates directly into sharper turn-in, faster direction changes, and more confident braking every time you hit the circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction makes the Cattiva the lightest wheel in the OZ range, slashing rotating mass for measurable handling gains\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by OZ's SBK Racing department — proven in Superbike competition and refined for track day use\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set included: 1x front wheel and 1x rear wheel, ready to bolt straight onto your S1000RR in place of the factory cast wheels\u003c\/li\u003e\n\u003cli\u003ePremium bearings, aluminium angled valve stems and spacers (fitted only where required) supplied as standard — no hunting for ancillary parts\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included; note that the original rear sprocket is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for BMW S1000RR K46 (2009–2018) models equipped with cast factory wheels\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards for long-term reliability under race conditions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the highest-value modifications available on a track motorcycle. Unlike power additions that demand the engine, brakes, and chassis work harder to manage the gain, lighter wheels improve every phase of riding simultaneously — acceleration, braking and cornering. The Cattiva's forged magnesium construction achieves this more effectively than cast aluminium alternatives, and the six-spoke architecture distributes stress efficiently while keeping the spoke profile clean and aerodynamically neutral at speed.\u003c\/p\u003e\u003cp\u003eOn the BMW S1000RR K46, where the chassis and electronics are already highly capable, the Cattiva set gives the rider a noticeably more agile front end and a rear that follows chassis inputs rather than lagging behind them. Regular track day riders will notice the difference from the first session.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Value\u003c\/h2\u003e\u003cp\u003eOZ's Italian manufacturing process applies the same forging and finishing standards used in its competition programme to every Cattiva set that leaves the facility. Each wheel is supplied with high-quality bearings already fitted, aluminium angled valve stems for straightforward tyre changes in the paddock, and all necessary spacers. The sprocket carrier is included in the set, but riders should source a compatible aftermarket rear sprocket as the stock BMW item will not fit the new carrier.\u003c\/p\u003e\u003cp\u003eFor riders who want a genuine race-spec wheel at a price point that makes track day upgrades accessible, the Cattiva set represents outstanding value — premium provenance, proven design, and a bolt-on installation that does not require specialist fabrication.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K46 produced between 2009 and 2018, on models fitted with the original cast factory wheels. It is not compatible with later S1000RR generations or any other model. Confirm your model year and original wheel type before ordering. These wheels are intended for track use only.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eConstruction: six-spoke\u003c\/li\u003e\n\u003cli\u003ePart numbers: C3063BM35X (front) + C6094BM60X (rear)\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel, bearings, aluminium angled valve stems, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 (2009–2018) with cast OEM wheels\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167397994762,"sku":"C3063BM35X+C6094BM60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167398027530,"sku":"C3063BM35X+C6094BM60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167398060298,"sku":"C3063BM35X+C6094BM60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_3a732d48-6db3-4ea3-8768-a1d3df66c353.png?v=1780796974"},{"product_id":"oz-cattiva-magnesium-felgen-set-bmw-s1000rr-k67","title":"OZ Cattiva Magnesium Wheel Set BMW S1000RR K67 (2019-2026)","description":"\u003cp\u003eBuilt in Italy to the exacting standards of OZ's SBK Racing division, the Cattiva magnesium wheel set represents the absolute pinnacle of lightweight wheel engineering for the BMW S1000RR K67. Forged from premium-grade magnesium — the lightest wheel material OZ produces — the Cattiva set delivers a measurable reduction in rotating mass that sharpens steering response, accelerates direction changes, and sustains composure at the limit where it matters most: on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel OZ manufactures, purpose-engineered for track use only.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by OZ's SBK Racing department for maximum agility and high-speed stability.\u003c\/li\u003e\n\u003cli\u003eSignificant reduction in unsprung and rotating mass for sharper handling and faster direction changes.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel and one rear wheel supplied together.\u003c\/li\u003e\n\u003cli\u003ePremium-grade bearings, aluminium angled valves, and spacers (fitted as required) included as standard.\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the standard BMW S1000RR K67 wheels; no frame or swingarm modifications required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering\u003c\/h2\u003e\u003cp\u003eThe Cattiva's six-spoke geometry is not a styling exercise — it is the direct result of OZ's involvement at the highest levels of Superbike competition. Every spoke profile and cross-section has been optimised to balance torsional rigidity against weight, so the wheel resists flex under hard braking and aggressive cornering loads while shedding every gram that is not structurally necessary. The outcome is a front end that communicates more and a rear that plants more predictably under power.\u003c\/p\u003e\u003cp\u003eMagnesium's inherent vibration-damping properties also reduce the harshness transmitted through the chassis on abrasive circuit surfaces, allowing the rider to maintain feel and confidence across a full race stint. Manufactured entirely in Italy, the Cattiva set carries OZ's commitment to dimensional consistency and surface integrity from raw billet to finished wheel.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K67 produced from 2019 to 2026. It is not compatible with BMW S1000RR models fitted with the M Package (forged carbon or forged aluminium wheels). Always verify your specific model variant before ordering. These wheels are intended for closed-circuit, track use only.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eDesign: 6-spoke\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K67 (2019-2026)\u003c\/li\u003e\n\u003cli\u003eSet contents: 1x front wheel, 1x rear wheel, premium bearings, aluminium angled valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003cli\u003eM Package compatibility: not compatible with forged carbon or forged aluminium M Package wheels\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167398191370,"sku":"C3232BM35X+C6271BM60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167398224138,"sku":"C3232BM35X+C6271BM60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167398256906,"sku":"C3232BM35X+C6271BM60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_733d2f35-bf13-4695-ad81-732741bc7a1c.png?v=1780796976"},{"product_id":"oz-cattiva-magnesium-felgen-set-ducati-panigale-899","title":"OZ Cattiva Magnesium Wheel Set Ducati Panigale 899 (2013-2016)","description":"\u003cp\u003eForged from high-grade magnesium by OZ's SBK Racing division, the Cattiva wheel set is the lightest wheel OZ produces — a direct-fit upgrade for the Ducati Panigale 899 (2013–2016) that cuts rotating mass dramatically and transforms the way the bike changes direction, brakes, and accelerates on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — OZ's lightest wheel, delivering a substantial reduction in unsprung and rotating mass for sharper throttle response and faster direction changes.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by OZ's SBK Racing department, balancing extreme low weight with the structural rigidity demanded at race speeds.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set (part numbers C3102DU35X and C6184DU55X) for a straightforward, matched installation.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium-grade bearings, aluminium angled tyre valves, and spacers where required — everything needed to fit is included.\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included; note that the original Ducati rear sprocket is not compatible and a suitable replacement is required.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment replacing the standard Panigale 899 wheels — no modifications to the chassis or brake system.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality and durability standards.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to improve a motorcycle's feel and response. With the Cattiva set fitted, the Panigale 899 accelerates harder out of corners, stops shorter under braking, and flicks from side to side with noticeably less effort. The six-spoke architecture keeps the wheel rigid under the lateral loads generated during hard cornering, so the chassis communicates clearly through every phase of a lap.\u003c\/p\u003e\u003cp\u003eThe Cattiva is optimised exclusively for track use. Its forged magnesium construction delivers the weight savings that matter most on circuit, where every rotating gram affects lap times. For road-registered machines, OZ offers alternative wheel programmes — but for dedicated track days or full race preparation, the Cattiva is the definitive OZ choice for the 899.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and engineered specifically for the Ducati Panigale 899, model years 2013 to 2016. It replaces the original wheels on a direct-fit basis. Note that the standard Ducati rear sprocket will not fit the supplied sprocket carrier; a compatible aftermarket sprocket must be sourced separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eDesign: six-spoke\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel\u003c\/li\u003e\n\u003cli\u003ePart numbers: C3102DU35X (front) + C6184DU55X (rear)\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 899, 2013–2016\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167398322442,"sku":"C3102DU35X+C6184DU55X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167398355210,"sku":"C3102DU35X+C6184DU55X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167398387978,"sku":"C3102DU35X+C6184DU55X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_1322c4f7-7c90-42ac-a807-22084970d4a1.png?v=1780796982"},{"product_id":"oz-cattiva-magnesium-felgen-set-bmw-s1000rr-k67-mit-m","title":"OZ Cattiva Magnesium Wheel Set – BMW S1000RR K67 with M Package (2019-2026)","description":"\u003cp\u003eEngineered by OZ's SBK Racing division, the Cattiva magnesium wheel set for the BMW S1000RR K67 with M Package (2019-2026) sits at the very top of the OZ catalogue. Forged from premium magnesium and shaped into a purposeful 6-spoke profile, these are the lightest wheels OZ produces — and every gram saved at the rim translates directly into faster turn-in, sharper mid-corner response and more of the physical ease that makes a long track day genuinely enjoyable rather than exhausting.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightest wheels in the OZ range: forged magnesium construction reduces rotating mass to an absolute minimum, easing the effort required to change direction lap after lap.\u003c\/li\u003e\n\u003cli\u003e6-spoke Cattiva design developed by OZ SBK Racing, balancing structural rigidity with the weight savings that matter most on circuit.\u003c\/li\u003e\n\u003cli\u003eDirect fitment to BMW S1000RR K67 with M Package (forged carbon or aluminium OE wheels) — no fabrication or adaptation required.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel, high-quality bearings, aluminium angle valves and spacing washers (supplied where required), plus a sprocket carrier (note: the original rear sprocket is not compatible).\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's highest manufacturing standards, ensuring the reliability and longevity demanded by competitive track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eForged Magnesium: Why It Changes the Ride\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the most effective ways to sharpen a motorcycle's dynamics, and magnesium offers a superior strength-to-weight ratio compared to aluminium. Because the Cattiva wheels are forged rather than cast, the grain structure of the metal is denser and more consistent — delivering the kind of predictable, fatigue-resistant performance that gives riders confidence deep into a session. Less rotating inertia also means the S1000RR accelerates and brakes with greater urgency, and the suspension has an easier job tracking the road surface over kerbs and through direction changes.\u003c\/p\u003e\u003ch2\u003eTrack-Optimised Design\u003c\/h2\u003e\u003cp\u003eThe Cattiva's 6-spoke geometry is not merely aesthetic. Each spoke is profiled to carry load efficiently while contributing as little mass as possible. The result is a wheel that holds its line under hard braking, resists flex during aggressive corner entry and responds immediately when you ask for it. For riders who spend serious time at the Nürburgring, Hockenheim or any European circuit, the cumulative benefit over a full day's lapping is a noticeably more composed and less physically demanding machine.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K67 fitted with the M Package — that is, the variant originally equipped with forged carbon or forged aluminium OE wheels — spanning model years 2019 through 2026. It is not compatible with the standard (non-M) S1000RR wheel specification. The included sprocket carrier is required, as the original BMW rear sprocket will not fit directly.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eSpoke configuration: 6-spoke\u003c\/li\u003e\n\u003cli\u003eSet contents: 1x front wheel, 1x rear wheel\u003c\/li\u003e\n\u003cli\u003eIncluded accessories: high-quality bearings, aluminium angle valves, spacing washers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K67 with M Package (2019-2026)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167398420746,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167398453514,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167398486282,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_07fa5ce7-3a62-4d21-8f31-7d1011a1d690.png?v=1780796983"},{"product_id":"oz-cattiva-magnesium-set-ducati-panigale-1199","title":"OZ Cattiva Magnesium Wheel Set Ducati Panigale 1199\/R\/S (2012-2017)","description":"\u003cp\u003eBorn in the OZ SBK Racing division and forged from premium magnesium, the Cattiva wheel set is the lightest offering in the entire OZ range. Designed as a direct, bolt-on replacement for the standard Ducati Panigale 1199\/R\/S wheels, the set delivers a meaningful reduction in rotating mass that translates into sharper turn-in, quicker direction changes, and more composure at speed — the kind of upgrade that pays dividends every time you ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel in OZ's catalogue, developed by the OZ SBK Racing department\u003c\/li\u003e\n\u003cli\u003eReduced rotating mass improves handling agility and acceleration response without touching the engine\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design optimised for high-speed stability and rapid directional changes\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory wheels on the Ducati Panigale 1199, 1199R and 1199S — no modifications required\u003c\/li\u003e\n\u003cli\u003eSet includes one front wheel and one rear wheel, plus quality bearings, aluminium angled valves, and spacers where needed\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards for long-term reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eThe Cattiva's forged magnesium structure achieves a weight saving over both cast aluminium and conventional forged aluminium wheels, cutting the unsprung and rotating mass that the suspension and engine must work against. On track, the result is a motorcycle that responds faster to rider inputs, requires less effort through corners, and feels more planted under hard braking. The six-spoke layout is not purely aesthetic — it is the product of OZ's motorsport engineering programme, balancing stiffness and weight distribution across the wheel's cross-section.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eOZ manufactures the Cattiva set at its Italian facility, applying the same processes used for its World Superbike programme. Each wheel ships with precision bearings, aluminium angled tyre valves, and any spacers required for the specific fitment — so everything needed for a clean installation arrives in the box. Available in gloss black, matte black, and gold finishes, the Cattiva integrates naturally with both road-registered Panigales and dedicated track-day machines.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012-2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199R (2012-2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199S (2012-2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe set replaces the original factory wheels on a direct-fit basis. No frame or swingarm modifications are required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet contents\u003c\/td\u003e\n\u003ctd\u003e1x front wheel, 1x rear wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded accessories\u003c\/td\u003e\n\u003ctd\u003eQuality bearings, aluminium angled valves, spacers (where required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart number\u003c\/td\u003e\n\u003ctd\u003eC3102DU35X+C6012DU60X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale 1199\/R\/S (2012-2017)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167398682890,"sku":"C3102DU35X+C6012DU60X_sg","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167398715658,"sku":"C3102DU35X+C6012DU60X_sm","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167398748426,"sku":"C3102DU35X+C6012DU60X_g","price":3782.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoCattivaSetBlackGlossy.png?v=1780796987"},{"product_id":"oz-cattiva-magnesium-felgen-set-ducati-panigale-959","title":"OZ Cattiva Magnesium Wheel Set for Ducati Panigale 959 (2016-2019)","description":"\u003cp\u003eBorn in the OZ SBK Racing division and shaped by a heritage of podium finishes, the Cattiva is the lightest wheel OZ manufactures — forged from premium magnesium and engineered exclusively for track use on the Ducati Panigale 959. The six-spoke design is not merely aesthetic; every gram and every curve serves a single purpose: extracting maximum performance from your 959.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel in the OZ range, drastically reducing unsprung and rotating mass for sharper turn-in and faster direction changes.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by the OZ SBK Racing department, balancing structural rigidity with minimal weight for high-speed stability.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set — one front wheel (C3102DU35X) and one rear wheel (C6184DU55X) supplied together.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium bearings, aluminium angled valves and spacers (fitted where required), plus a rear sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on fitment for the Ducati Panigale 959 (2016–2019), replacing the standard wheels without modification to the chassis.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability under racing loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Heritage\u003c\/h2\u003e\u003cp\u003eThe Cattiva name carries real racing pedigree. Conceived within OZ's Superbike racing department, the design brief was uncompromising: produce the lightest forged magnesium wheel possible without sacrificing the structural integrity demanded at race pace. The result is a wheel that has found its way onto competitive machinery at circuits across Europe, and now onto the Panigale 959 platform in a fitment engineered specifically for its geometry and braking architecture.\u003c\/p\u003e\u003cp\u003eThe finish options — gloss black, matte black and gold — each present the Cattiva's spoke geometry differently, but the underlying character remains the same: purposeful, Italian, and unmistakably OZ.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most impactful modifications you can make to a motorcycle. Lighter wheels spin up faster, load the tyres more progressively and allow the suspension to follow road or track surface irregularities with greater fidelity. On the Panigale 959, where the chassis already rewards precise rider inputs, fitting the Cattiva set sharpens every element of the dynamic package — from initial braking through apex to corner exit acceleration.\u003c\/p\u003e\u003cp\u003eThese wheels are optimised exclusively for track use. For riders who attend circuit days and demand the absolute best from their Panigale 959, the Cattiva set represents one of the most transformative upgrades available.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and tested specifically for the following:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eDucati Panigale 959 — model years 2016, 2017, 2018, 2019\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe original rear sprocket is not compatible with the Cattiva carrier. A replacement sprocket suited to the OZ carrier must be fitted. All other hardware required for installation is included in the set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Numbers\u003c\/th\u003e\n\u003ctd\u003eC3102DU35X (front) + C6184DU55X (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpoke configuration\u003c\/th\u003e\n\u003ctd\u003e6-spoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eDucati Panigale 959 (2016–2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003eTrack use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167398781194,"sku":"C3102DU35X+C6184DU55X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167398813962,"sku":"C3102DU35X+C6184DU55X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167398846730,"sku":"C3102DU35X+C6184DU55X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_70c079ee-f5d8-40a4-b2cc-577fb0903005.png?v=1780796989"},{"product_id":"oz-cattiva-magnesium-felgen-set-ducati-panigale-1299-s","title":"OZ Cattiva Magnesium Wheel Set Ducati Panigale 1299\/S (2015-2018)","description":"\u003cp\u003eEngineered to meet the uncompromising safety and performance standards demanded by superbike racing, the OZ Cattiva wheel set represents the pinnacle of OZ's forged magnesium technology. Developed directly by the OZ SBK Racing division, these are the lightest wheels in the entire OZ catalogue — a distinction that carries genuine engineering weight when you are chasing tenths on track with a Ducati Panigale 1299 or 1299 S.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction from OZ's SBK Racing division — the lightest wheel in the OZ range, purpose-built for maximum safety margins and reliability under race conditions.\u003c\/li\u003e\n\u003cli\u003eSignificant reduction in rotating mass delivers sharper turn-in, faster direction changes and improved stability at high speeds.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design optimised for aerodynamic efficiency and structural rigidity across the full rev range.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel, supplied with premium-grade bearings, aluminium angled valves and spacers (fitted where required).\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on compatibility with the Ducati Panigale 1299\/S OEM wheel specification — no modifications required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting production standards, ensuring long-term reliability in the most demanding track environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePurpose-Built for the Track\u003c\/h2\u003e\u003cp\u003eThe Cattiva design did not emerge from a styling studio — it was conceived within OZ's Superbike racing programme, where every gram of unsprung and rotating mass has a measurable effect on lap time and rider confidence. By replacing the factory cast wheels with forged magnesium units, the Panigale 1299\/S benefits from noticeably quicker steering response, reduced gyroscopic forces and improved tyre feedback through fast, technical corners. The six-spoke layout distributes load efficiently while keeping the spoke section as light as physics and safety allow.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Safety\u003c\/h2\u003e\u003cp\u003eOZ's forged magnesium process produces a grain structure that is denser and more consistent than casting, translating into a wheel that is both lighter and stronger in the areas that matter most. Every set leaves the Italian factory having passed OZ's internal quality controls, and the included premium bearings ensure that the assembly is race-ready from the moment it is fitted. Aluminium angled valves ease tyre pressure management even with the wheel installed in the swingarm, and spacers are included to accommodate fitment variations where necessary.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1299 (2015-2018)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1299 S (2015-2018)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe set is a direct replacement for the OEM wheels on these models. These wheels are optimised exclusively for track use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eC3102DU35X + C6012DU60X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eSix-spoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eScope of Delivery\u003c\/td\u003e\n\u003ctd\u003e1x front wheel, 1x rear wheel, premium bearings, aluminium angled valves, spacers (where required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended Use\u003c\/td\u003e\n\u003ctd\u003eTrack only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of Manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167398879498,"sku":"C3102DU35X+C6012DU60X_sg","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167398912266,"sku":"C3102DU35X+C6012DU60X_sm","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167398945034,"sku":"C3102DU35X+C6012DU60X_g","price":3782.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoCattivaSetBlackGlossy_bbe55185-298d-42c4-a19e-3ffee63f0ac3.png?v=1780796989"},{"product_id":"oz-cattiva-magnesium-set-ducati-panigale-v4","title":"OZ Cattiva Magnesium Wheel Set for Ducati Panigale V4\/S\/R (2018-2024)","description":"\u003cp\u003eFor Ducati Panigale V4\/S\/R riders who demand every last advantage on track, the OZ Cattiva magnesium wheel set delivers a tangible reduction in rotating mass that transforms the way the bike accelerates, changes direction, and responds to rider input. Developed by the OZ SBK Racing division and manufactured in Italy, these are the lightest wheels in the entire OZ range — a direct, drop-in upgrade over the factory fitment.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged from premium magnesium — the lightest material OZ offers, delivering a dramatic reduction in unsprung and rotating mass for sharper turn-in and faster acceleration.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design engineered by the OZ SBK Racing department for optimised stiffness, agility, and high-speed stability.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: one front wheel and one rear wheel supplied together, giving you everything needed for a full conversion in a single purchase.\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angle valves, and spacers (fitted only where required), so no hunting for ancillary parts.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the standard Ducati Panigale V4\/S\/R wheels — no modifications required for fitment.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: OZ's renowned manufacturing quality ensures reliability and durability under the demands of repeated track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to sharpen a motorcycle's real-world performance. With the Cattiva set fitted, the Panigale V4 family responds more keenly to throttle inputs, brakes with greater feel at the leading edge, and changes direction with noticeably less effort. The six-spoke layout keeps torsional rigidity high, so the gains in agility do not come at the expense of the composure that a superbike demands at high speed.\u003c\/p\u003e\u003cp\u003eThe Cattiva's magnesium construction also means heat dissipation characteristics differ from cast aluminium alternatives, which can contribute to more consistent tyre behaviour across a long stint. This is a wheel engineered for the circuit, and every design decision reflects that priority.\u003c\/p\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eBecause the Cattiva set replaces the OEM wheels on a like-for-like basis, fitting them is straightforward and reversible — your stock wheels can be stored and refitted for road use at any time. The inclusion of bearings, valves, and spacers in the package removes the hidden costs that often accompany high-specification wheel upgrades, making the total outlay more predictable. For riders who attend track days regularly, the performance gains are delivered from the very first session rather than requiring break-in or calibration.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is specifically developed for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale V4 (2018-2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 S (2018-2024)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale V4 R (2018-2024)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet contents\u003c\/th\u003e\n\u003ctd\u003e1x front wheel, 1x rear wheel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpoke design\u003c\/th\u003e\n\u003ctd\u003eSix-spoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIncluded accessories\u003c\/th\u003e\n\u003ctd\u003eBearings, aluminium angle valves, spacers (where required)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC3102DU35X+C6012DU60X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003eTrack use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167399076106,"sku":"C3102DU35X+C6012DU60X_sg","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167399108874,"sku":"C3102DU35X+C6012DU60X_sm","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167399141642,"sku":"C3102DU35X+C6012DU60X_g","price":3782.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoCattivaSetBlackGlossy_9ed323c5-1b62-404f-803d-1599369510be.png?v=1780796996"},{"product_id":"oz-cattiva-magnesium-set-ducati-panigale-v2","title":"OZ Cattiva Magnesium Wheel Set Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eForged from premium magnesium by OZ's SBK Racing division, the Cattiva wheel set is the lightest wheel in the entire OZ range — a direct, measurable upgrade in rotational mass reduction that transforms how the Panigale V2 955 responds to every steering input, braking point, and throttle application on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel OZ produces, delivering a significant reduction in unsprung and rotating mass for sharper, more immediate handling.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by the OZ SBK Racing department, optimising stiffness, agility, and high-speed stability simultaneously.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) supplied together.\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angled valves, and spacers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for the standard Ducati Panigale V2 955 wheels — no modifications required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ Racing's exacting manufacturing standards for track-grade reliability and longevity.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to sharpen a motorcycle's dynamic behaviour, and the Cattiva set makes that reduction count where it matters most. The forged magnesium construction keeps weight to an absolute minimum, letting the Panigale V2 955 change direction with noticeably less effort, respond faster to braking inputs, and carry speed through corners with greater confidence. The six-spoke layout provides the structural rigidity needed to handle race-level lateral and torsional loads without compromise.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eEvery Cattiva wheel is produced in Italy under OZ Racing's quality protocols, using forged magnesium rather than cast alloy to achieve the density-to-strength ratio demanded by Superbike competition. The complete kit arrives with matched bearings and aluminium angled valves specified to complement the wheel's performance characteristics, so the set is ready to mount without sourcing additional hardware.\u003c\/p\u003e\u003ch2\u003eImportant Note\u003c\/h2\u003e\u003cp\u003eThese wheels are optimised exclusively for track use. They are not homologated for road use and should be fitted and used in a competition or closed-circuit environment only.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\u003cli\u003eDucati Panigale V2 955 (2020–2024)\u003c\/li\u003e\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront wheel size\u003c\/th\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear wheel size\u003c\/th\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC3010DU35X + C6012DU55X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003eTrack only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167399174410,"sku":"C3010DU35X+C6012DU55X_sg","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167399207178,"sku":"C3010DU35X+C6012DU55X__sm","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167399239946,"sku":"C3010DU35X+C6012DU55X_g","price":3782.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoCattivaSetBlackGlossy_ef5dde25-f8c5-49c1-abce-727459ffef0a.png?v=1780796997"},{"product_id":"oz-cattiva-magnesium-felgen-set-honda-sc77","title":"OZ Cattiva Magnesium Wheel Set Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)","description":"\u003cp\u003eBorn on the Superbike World Championship grid, the OZ Cattiva magnesium wheel set delivers the most dramatic reduction in unsprung and rotating mass available for the Honda CBR 1000 RR \/ SP1 SC77. Forged from premium magnesium by OZ's SBK Racing division and manufactured in Italy, these are the lightest wheels in the entire OZ range — purpose-built to unlock genuine track performance gains the moment they leave the pit lane.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel OZ produces, slashing rotating mass for faster acceleration, harder braking and quicker direction changes\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed directly by the OZ SBK Racing department, optimising stiffness-to-weight balance at race speeds\u003c\/li\u003e\n\u003cli\u003eDramatically improved agility and high-speed stability through significantly reduced gyroscopic forces\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the Honda CBR 1000 RR \/ SP1 SC77 (2017-2019) OEM wheels — no frame modifications required\u003c\/li\u003e\n\u003cli\u003eComplete set includes front and rear wheel, quality bearings, aluminium angle valves and spacers (supplied only where required)\u003c\/li\u003e\n\u003cli\u003eIncludes a rear sprocket carrier — note that the original Honda rear sprocket is not compatible and a replacement carrier-specific sprocket must be used\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting motorsport quality standards for race-proven reliability and longevity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Engineering\u003c\/h2\u003e\u003cp\u003eThe Cattiva is not a road wheel adapted for occasional track use — it is a racing wheel designed from the ground up for the demands of circuit riding. The forged magnesium process aligns the grain structure of the metal for superior strength under the extreme lateral and torsional loads generated at race pace, while keeping mass to an absolute minimum. The result is a wheel that responds to rider inputs with an immediacy that cast aluminium simply cannot match.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass at both ends of the motorcycle has a compounding effect on every dynamic phase of a lap. Acceleration is sharper because the engine overcomes less inertia. Braking distances shorten as the wheels resist deceleration less aggressively. Mid-corner transitions become more fluid, and the six-spoke architecture provides the precise lateral rigidity needed when leaned hard into fast corners. For CBR 1000 RR and SP1 riders competing in track days, club racing or national championships, the Cattiva set is one of the single highest-impact upgrades available.\u003c\/p\u003e\u003ch3\u003eImportant Note\u003c\/h3\u003e\u003cp\u003eThese wheels are optimised exclusively for track use. The included rear sprocket carrier is not compatible with the original Honda rear sprocket — a suitable replacement sprocket must be sourced separately.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR 1000 RR SC77 (2017, 2018, 2019)\u003c\/li\u003e\n\u003cli\u003eHonda CBR 1000 RR SP1 SC77 (2017, 2018, 2019)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Numbers\u003c\/th\u003e\n\u003ctd\u003eC3212HO35X + C6245HO60X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpoke Design\u003c\/th\u003e\n\u003ctd\u003eSix-spoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of Manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended Use\u003c\/th\u003e\n\u003ctd\u003eTrack \/ racing (not road approved)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eHonda CBR 1000 RR \/ SP1 SC77 (2017-2019)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167399305482,"sku":"C3212HO35X+C6245HO60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167399338250,"sku":"C3212HO35X+C6245HO60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167399371018,"sku":"C3212HO35X+C6245HO60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_e6d8bd19-f359-4cf8-911d-63143a4172ba.png?v=1780797002"},{"product_id":"oz-cattiva-magnesium-felgen-set-honda-sc82","title":"OZ Cattiva Forged Magnesium Wheel Set – Honda CBR 1000 RR-R SC82 (2020–2026)","description":"\u003cp\u003eThe OZ Cattiva wheel set is the lightest wheel OZ produces, forged from premium magnesium by the OZ SBK Racing division and engineered exclusively for track use. Fitted to the Honda CBR 1000 RR-R SC82, this front and rear pair delivers a dramatic reduction in rotating mass — sharpening turn-in, improving mid-corner agility and releasing every fraction of the engine's performance where it counts most.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel in the entire OZ range, offering exceptional strength-to-weight ratio for race conditions.\u003c\/li\u003e\n\u003cli\u003eDramatically reduced rotating mass improves throttle response, braking feel and overall ride dynamics at the limit.\u003c\/li\u003e\n\u003cli\u003eComplete set includes front wheel, rear wheel, high-quality bearings, aluminium angled valves and spacers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included as standard — note that the original Honda sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement geometry: mounts directly in place of the standard CBR 1000 RR-R SC82 wheels with no modification required.\u003c\/li\u003e\n\u003cli\u003eCompatible with both the standard and SP model variants of the SC82.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing Pedigree\u003c\/h2\u003e\u003cp\u003eThe Cattiva design was conceived within OZ's Superbike racing department — a programme that has supplied factory and satellite teams at the highest level of circuit racing. Every spoke profile, hub geometry and surface finish is the result of rigorous track validation, not road compromise. When lap times define success, this is the wheel OZ reaches for.\u003c\/p\u003e\u003ch3\u003eMade in Italy\u003c\/h3\u003e\u003cp\u003eEach wheel is manufactured in Italy to OZ's exacting quality standards. The forging process aligns the magnesium grain structure for maximum fatigue resistance, ensuring the wheel can sustain repeated high-speed braking and kerb loads without deformation. The finish — available in gloss black, matte black or gold — is applied with the same care as the structural work beneath it.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eHonda CBR 1000 RR-R SC82 (2020–2026)\u003c\/li\u003e\n\u003cli\u003eHonda CBR 1000 RR-R SP SC82 (2020–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSet contents\u003c\/th\u003e\n\u003ctd\u003eFront wheel, rear wheel, bearings, aluminium angled valves, spacers (as required), rear sprocket carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eHonda CBR 1000 RR-R \/ RR-R SP SC82 (2020–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eDirect OEM replacement — no modification required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOrigin\u003c\/th\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003eTrack \/ circuit racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167399534858,"sku":"C3247HO35X+C6290HO60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167399567626,"sku":"C3247HO35X+C6290HO60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167399600394,"sku":"C3247HO35X+C6290HO60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_068edaa9-63dc-4d41-8355-f298040c8efd.png?v=1780797005"},{"product_id":"oz-cattiva-magnesium-felgen-set-honda-sp2-sc77","title":"OZ Cattiva Magnesium Wheel Set Honda CBR 1000 RR SP2 SC77 (2017–2019)","description":"\u003cp\u003eThe OZ Cattiva wheel set brings genuine SBK-derived magnesium forging technology to your Honda CBR 1000 RR SP2 SC77, delivering a meaningful reduction in rotating mass that sharpens steering response and agility without demanding any exotic modifications. Developed by the OZ SBK Racing division, the Cattiva is the lightest wheel in the OZ range and a direct bolt-on upgrade for the SC77 SP2 built between 2017 and 2019.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel OZ produces, purpose-built for track duty\u003c\/li\u003e\n\u003cli\u003eReduced rotating mass translates directly into quicker steering, faster direction changes and improved throttle response\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set, removing the hassle of sourcing individual wheels separately\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angled valves and spacers (fitted where required)\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — note that the original Honda rear sprocket is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eDirect replacement fitment for the SC77 SP2: no modifications to the motorcycle are required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eCraftsmanship and Track Performance\u003c\/h2\u003e\u003cp\u003eMade in Italy to OZ Racing's exacting standards, every Cattiva wheel begins as a billet of aerospace-grade magnesium that is hot-forged under high pressure. The result is an exceptionally rigid yet light structure that maintains its geometry under the lateral loads generated during hard braking and corner entry. The signature Cattiva spoke design was shaped by OZ's SBK engineers to remove every gram of unnecessary material while preserving torsional stiffness — the balance between rigidity and compliance that separates a genuine racing wheel from an imitation.\u003c\/p\u003e\u003cp\u003eAt track speeds the benefit is immediately felt: reduced gyroscopic inertia lets the CBR 1000 RR SP2 change direction with noticeably less effort, and the lighter unsprung mass allows the suspension to follow the track surface more faithfully, keeping the tyres in optimal contact through undulations and bumps.\u003c\/p\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eWhile the Cattiva's heritage is firmly on the circuit, the set is equally rewarding for the rider who visits the track a handful of times a season but still wants the best available equipment on the road. The direct-fit design means installation is straightforward for any competent workshop, and the complete package — wheels, bearings, valves and sprocket carrier — means there are no hidden additional parts to source. Buying the set as a pair rather than individual wheels also represents better overall value, and the three available finishes allow you to match the aesthetic of your CBR without compromise.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set fits exclusively the Honda CBR 1000 RR SC77 SP2, model years 2017, 2018 and 2019. It is not compatible with standard (non-SP2) SC77 variants or any other CBR 1000 RR generation. Please verify your model designation before ordering. The original Honda rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eConstruction: hot-forged, Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR SP2 SC77 (2017–2019)\u003c\/li\u003e\n\u003cli\u003eContents: front wheel, rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eAvailable finishes: gloss black, matte black, gold\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167399665930,"sku":"C3226HO35X+C6245HO60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167399698698,"sku":"C3226HO35X+C6245HO60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167399731466,"sku":"C3226HO35X+C6245HO60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_c7726b4b-19cd-4a82-9606-1f65c7576987.png?v=1780797008"},{"product_id":"oz-cattiva-magnesium-felgen-set-kawasaki-zx-10-r-16-20","title":"OZ Cattiva Magnesium Wheel Set Kawasaki ZX-10 R (2016-2020)","description":"\u003cp\u003eThe OZ Cattiva wheel set brings genuine SBK racing technology to your Kawasaki ZX-10 R at a level of everyday usability that makes it one of the most rewarding upgrades available for the 2016–2020 model. Forged from premium magnesium by OZ's SBK Racing division, the Cattiva is the lightest wheel in the OZ range — and that reduction in rotating mass translates into sharper turn-in, quicker steering response and noticeably more composed braking every time you ride.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel OZ produces, delivering a meaningful reduction in unsprung and rotating mass.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by OZ's SBK Racing department for an optimal balance of rigidity and low weight.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set (C3184KA35X + C6125KA60X) — direct replacement for the standard Kawasaki ZX-10 R wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angle valves and spacers (fitted only where required), plus a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's stringent manufacturing standards for long-term reliability.\u003c\/li\u003e\n\u003cli\u003eOptimised for track use, where the performance gains in agility, acceleration response and high-speed stability are most apparent.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the highest-return modifications you can make to a motorcycle. Every gram saved at the wheel rim requires less energy to accelerate and decelerate, which means the ZX-10 R responds more eagerly to throttle inputs, brakes with greater feel and changes direction with less effort from the rider. The Cattiva's six-spoke architecture stiffens the wheel under lateral cornering loads while keeping the overall mass as low as possible — a combination that riders feel immediately, not just on the stopwatch.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eOZ has been supplying forged magnesium wheels to World Superbike and MotoGP teams for decades, and the Cattiva applies exactly the same metallurgy and forging process to road-going hardware. Each wheel is produced in Italy under tight quality controls, and the set arrives ready to mount with all necessary hardware included. The sprocket carrier accepts a standard aftermarket rear sprocket, giving you the freedom to fine-tune your gearing at the same time.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Kawasaki ZX-10 R covering model years 2016, 2017, 2018, 2019 and 2020. It is a direct, bolt-on replacement for the factory wheels on those models. The original OEM rear sprocket is not compatible; a suitable aftermarket sprocket must be used with the included sprocket carrier. These wheels are optimised for track use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003ePart numbers: C3184KA35X (front) + C6125KA60X (rear)\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eSpoke configuration: six-spoke\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R, 2016–2020\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167399895306,"sku":"C3184KA35X+C6125KA60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167399928074,"sku":"C3184KA35X+C6125KA60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167399960842,"sku":"C3184KA35X+C6125KA60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_6741fd96-6d1d-4d3e-84c4-1aa338a921d5.png?v=1780797014"},{"product_id":"oz-cattiva-magnesium-felgen-set-kawasaki-zx-6r","title":"OZ Cattiva Magnesium Wheel Set Kawasaki ZX-6R\/636\/RR (2007-2026)","description":"\u003cp\u003eForged from premium magnesium by OZ's SBK Racing division, the Cattiva wheel set represents the lightest wheel in the entire OZ range — an uncompromising track tool engineered to deliver measurable gains in handling, agility and lap times on the Kawasaki ZX-6R, 636 and RR across all model years from 2007 to 2026.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction: the lightest wheel OZ produces, delivering a significant reduction in rotating mass for sharper throttle response and more precise steering feedback.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by the OZ SBK Racing department — optimised aerodynamically and structurally for track use at the highest level.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set: direct, drop-in replacement for the standard Kawasaki ZX-6R\/636\/RR wheels with no frame modification required.\u003c\/li\u003e\n\u003cli\u003ePremium ancillaries included: high-quality bearings, aluminium angle-type tyre valves, and spacers where required, plus a sprocket carrier (note: the original rear sprocket is not compatible).\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting motorsport manufacturing standards, ensuring long-term reliability even under sustained race loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe Cattiva's defining characteristic is its forged magnesium alloy structure. Where cast aluminium wheels rely on bulk for strength, forged magnesium achieves superior rigidity at a fraction of the weight. The result is a dramatic reduction in unsprung and rotating mass — the two figures that matter most for real-world corner entry, mid-corner balance and drive off the apex. Every gram removed from the wheel has a disproportionate effect on handling compared to equivalent mass removed from the chassis, and OZ has exploited this principle to its logical extreme with the Cattiva.\u003c\/p\u003e\u003cp\u003eManufacture takes place entirely in Italy, where OZ has produced motorsport wheels for world championship campaigns for decades. Tolerances are held to race-level standards, and each wheel undergoes quality control consistent with OZ's SBK and circuit-racing programmes.\u003c\/p\u003e\u003ch2\u003eTrack Performance\u003c\/h2\u003e\u003cp\u003eThe six-spoke layout is not simply aesthetic. It is the product of OZ's racing engineering team, balancing spoke cross-section against rotational inertia to produce a wheel that reacts instantly to steering input and resists flex under heavy braking. At the speeds and cornering loads generated by a ZX-6R on circuit, that rigidity translates directly into confidence and consistency. The reduced gyroscopic effect from the lower rotating mass also lightens the steering feel, allowing quicker direction changes through chicanes and slow-speed hairpins without any loss of high-speed stability.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set has been developed specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R — 2007 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R 636 — 2007 to 2026\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R RR — 2007 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe set replaces the original front and rear wheels directly. Spacers are supplied where fitment requires them. A sprocket carrier is included; however, the original Kawasaki rear sprocket is not compatible and must be replaced accordingly. These wheels are optimised exclusively for track use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: C3007KA35 (front) + C6019KA55X (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium alloy\u003c\/li\u003e\n\u003cli\u003eDesign: 6-spoke Cattiva\u003c\/li\u003e\n\u003cli\u003eSet contents: 1x front wheel, 1x rear wheel\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angle tyre valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-6R \/ 636 \/ RR, 2007–2026\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167400026378,"sku":"C3007KA35+C6019KA55X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167400059146,"sku":"C3007KA35+C6019KA55X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167400091914,"sku":"C3007KA35+C6019KA55X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_15311e0c-d123-4907-a622-19e30afa13f7.png?v=1780797016"},{"product_id":"oz-cattiva-magnesium-set-kawasaki-zx-10-r","title":"OZ Cattiva Magnesium Wheel Set Kawasaki ZX-10 R (2021-2026)","description":"\u003cp\u003eForged from premium magnesium alloy by OZ's own SBK Racing division, the Cattiva wheel set represents the absolute pinnacle of OZ's wheel engineering. As the lightest wheel OZ produces, the Cattiva set delivers a dramatic reduction in unsprung and rotating mass — transforming the way your Kawasaki ZX-10 R responds to every input on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel in the entire OZ range, built exclusively for track use.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by OZ's SBK Racing department for maximum rigidity and minimum mass.\u003c\/li\u003e\n\u003cli\u003eSubstantial reduction in rotating mass improves agility, sharpens steering response and increases stability at high speeds.\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the stock Kawasaki ZX-10 R wheels — no modification required.\u003c\/li\u003e\n\u003cli\u003eComplete set includes front wheel, rear wheel, premium bearings, aluminium angle valves and spacers (fitted where required).\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to the exacting standards of OZ's race-proven manufacturing process.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe Cattiva's defining characteristic is its material: forged magnesium. Where cast aluminium wheels rely on bulk for strength, forged magnesium achieves exceptional structural integrity at a fraction of the weight. OZ's SBK Racing team developed the Cattiva specifically for Superbike competition, which means every gram has been scrutinised and every spoke profile is shaped by genuine motorsport data rather than marketing ambition. The result is a wheel that is not merely light but correctly stiff — delivering consistent feedback through the tyre and into the rider's hands.\u003c\/p\u003e\u003cp\u003eThe six-spoke architecture balances torsional and radial loads precisely, resisting the enormous braking and cornering forces generated at track pace on the ZX-10 R without flex or vibration. Finish quality is consistent with the premium OZ Racing name: surfaces are cleanly machined and the finish — available in gloss black, matte black or gold — is applied to a standard that holds up in the demanding environment of a race paddock.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the highest-value modifications available to any track-day rider or racer. Less rotating inertia means the engine's torque accelerates the wheel more quickly, braking forces decelerate it more readily, and the front end follows changes in direction with noticeably less effort. On the ZX-10 R, which already rewards precise, committed riding, fitting the Cattiva set sharpens every transition — turn-in, mid-corner balance and drive — in a way that conventional aftermarket wheels in aluminium simply cannot match.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and engineered specifically for the Kawasaki ZX-10 R covering model years 2021 through 2026. The wheels are direct replacements for the original equipment items and require no frame or suspension modification. A sprocket carrier is included in the set; however, the original Kawasaki rear sprocket is not compatible and must be substituted with an appropriate aftermarket unit. These wheels are optimised exclusively for track use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: C3184KA35X (front) + C6125KA60X (rear)\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eDesign: six-spoke Cattiva\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R (2021-2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: track only\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, premium bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eNote: original Kawasaki rear sprocket not compatible\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167400124682,"sku":"C3184KA35X+C6125KA60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167400157450,"sku":"C3184KA35X+C6125KA60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167400190218,"sku":"C3184KA35X+C6125KA60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_ef8fed2f-2b73-4440-be67-e5715a068185.png?v=1780797016"},{"product_id":"oz-cattiva-magnesium-felgen-set-mv-agusta-f3","title":"OZ Cattiva Magnesium Wheel Set for MV Agusta F3 675\/800 (2012-2026)","description":"\u003cp\u003eForged from aerospace-grade magnesium by OZ's SBK Racing division, the Cattiva wheel set is the lightest fitment in the entire OZ range — a direct, bolt-on upgrade for the MV Agusta F3 675\/800 that transforms how the bike responds from the first corner. The dramatic reduction in unsprung and rotating mass sharpens turn-in, improves mid-corner stability and lets the F3's chassis work exactly as its engineers intended.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightest wheels in the OZ catalogue: forged magnesium construction cuts rotating mass for genuine, measurable gains in agility and acceleration.\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed directly by OZ's SBK Racing department — proven at the highest level of production-based competition.\u003c\/li\u003e\n\u003cli\u003eComplete set: includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), ready to replace the OEM units without modification.\u003c\/li\u003e\n\u003cli\u003eHigh-quality bearings, aluminium angled valves and spacers (supplied where required) included as standard.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement for all MV Agusta F3 675 and F3 800 models from 2012 to 2026 — no adapters, no guesswork.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability under sustained track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBorn on the Superbike Grid\u003c\/h2\u003e\u003cp\u003eThe Cattiva name carries genuine racing DNA. OZ's SBK Racing division distilled years of World Superbike development into this road-legal magnesium wheel, translating what factory riders demand — minimum rotational inertia, maximum structural integrity — into a package any track-day rider can bolt straight onto their F3. The six-spoke layout is not a stylistic choice alone; it is a carefully engineered balance between stiffness, weight distribution and the aerodynamic clearance that high-speed braking zones demand.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass at both ends of the motorcycle has a compounding effect: lighter wheels require less effort to change direction, respond more keenly to steering inputs and place less thermal stress on tyre sidewalls under sustained cornering loads. On an MV Agusta F3 — already one of the most rewarding middleweight platforms on circuit — the Cattiva set removes one of the last meaningful compromises left in the standard specification. Part number: C3117MV35X+C6026MV55X.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMV Agusta F3 675 (2012-2026)\u003c\/li\u003e\n\u003cli\u003eMV Agusta F3 800 (2012-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe set is a direct replacement for the original wheels and requires no additional adapters or brackets. Supplied spacers are included where fitment requires them. These wheels are optimised exclusively for track use.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront wheel size\u003c\/th\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear wheel size\u003c\/th\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart number\u003c\/th\u003e\n\u003ctd\u003eC3117MV35X+C6026MV55X\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eMV Agusta F3 675\/800 (2012-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntended use\u003c\/th\u003e\n\u003ctd\u003eTrack use only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167400386826,"sku":"C3117MV35X+C6026MV55X_sg","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167400419594,"sku":"C3117MV35X+C6026MV55X_sm","price":3782.4,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167400452362,"sku":"C3117MV35X+C6026MV55X_g","price":3782.4,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoCattivaSetBlackGlossy_62c445dc-e2b5-41ea-9796-696efff0ec10.png?v=1780797022"},{"product_id":"oz-cattiva-magnesium-set-suzuki-gsx-r-1000","title":"OZ Cattiva Magnesium Wheel Set for Suzuki GSX-R 1000 (2017-2023)","description":"\u003cp\u003eBorn in the OZ SBK Racing department and forged from premium magnesium, the Cattiva is the lightest wheel in the entire OZ range — and this complete front and rear set makes that performance accessible for GSX-R 1000 owners who want a genuine, day-to-day upgrade without compromise. Direct-fit compatibility with the 2017-2023 GSX-R 1000 means no fabrication, no guesswork, and no wasted weekends.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel OZ produces, dramatically reducing rotating mass for sharper turn-in and more responsive acceleration\u003c\/li\u003e\n\u003cli\u003eSix-spoke Cattiva design developed by the OZ SBK Racing division, balancing weight reduction with the structural rigidity demanded at high speed\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel and one rear wheel supplied together, so you replace everything in a single purchase\u003c\/li\u003e\n\u003cli\u003eSupplied with bearings, aluminium angled valves, and spacers where required — everything needed to mount the wheels correctly\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included; note that the original rear sprocket does not carry over and a new one must be fitted\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the standard Suzuki GSX-R 1000 wheels — no modification to the motorcycle required\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term durability and reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the most effective chassis improvements you can make to any sports bike, and the Cattiva set delivers that benefit the moment you leave the paddock or pull out of the driveway. Lighter wheels mean the suspension can follow road or track surface changes more accurately, the steering requires less physical effort through direction changes, and the drivetrain wastes less energy spinning the wheels themselves. Whether you use the GSX-R 1000 as a fast road machine or take it to track days, those gains are present every single ride — not just at the limit.\u003c\/p\u003e\u003ch2\u003eRace-Developed Construction\u003c\/h2\u003e\u003cp\u003eOZ's SBK Racing department developed the Cattiva specifically around the demands of Superbike competition, where every gram of rotating mass has a measurable effect on lap times. Forged magnesium offers a superior strength-to-weight ratio compared with cast aluminium wheels, and the six-spoke layout is optimised to channel cornering and braking loads efficiently through the wheel structure. The result is a wheel that feels alive under hard use without sacrificing the confidence you need when leaning on the brakes at the end of a straight.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the following motorcycle:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eSuzuki GSX-R 1000, model years 2017 to 2023\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe set replaces the original front and rear wheels on a like-for-like basis. The original rear sprocket is not compatible with the Cattiva sprocket carrier; a suitable replacement rear sprocket must be sourced separately. Part number: C3052SU35X+C6080SU60X.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eConstruction: six-spoke\u003c\/li\u003e\n\u003cli\u003eContents: front wheel, rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 1000 (2017-2023)\u003c\/li\u003e\n\u003cli\u003ePart number: C3052SU35X+C6080SU60X\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167400517898,"sku":"C3052SU35X+C6080SU60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167400550666,"sku":"C3052SU35X+C6080SU60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167400583434,"sku":"C3052SU35X+C6080SU60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_eb58cb31-3c10-46e3-b0c9-6a3473e9b7df.png?v=1780797022"},{"product_id":"oz-cattiva-magnesium-felgen-set-yamaha-r6-03-16","title":"OZ Cattiva Magnesium Wheel Set Yamaha YZF-R6 (2003-2016)","description":"\u003cp\u003eBorn on the circuit and shaped by OZ's SBK Racing division, the Cattiva wheel set brings genuine motorsport heritage to the Yamaha YZF-R6. Forged from high-strength magnesium and finished to OZ's exacting Italian standards, these are the lightest wheels in the entire OZ range — a distinction earned through design, not compromise.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction makes this OZ's lightest wheel, dramatically cutting unsprung and rotating mass for sharper turn-in and faster direction changes.\u003c\/li\u003e\n\u003cli\u003eThe six-spoke Cattiva design, developed directly by the OZ SBK Racing department, is engineered for maximum stiffness at high speed while preserving the visual drama the line is famous for.\u003c\/li\u003e\n\u003cli\u003eReducing rotating mass measurably improves acceleration, braking response and overall ride dynamics — gains that are immediately felt on track.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel, supplied with bearings, aluminium angled valves and spacers (fitted as required), plus a sprocket carrier (note: the original sprocket is not compatible and must be replaced).\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the standard Yamaha YZF-R6 (2003–2016) wheels — no custom fabrication required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's highest production standards, ensuring outstanding durability and long-term reliability under race conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eThe Cattiva nameplate has graced the paddock for years, and the aesthetic earned in Superbike racing is immediately recognisable in the six-spoke profile. Available in gloss black, matte black or gold, each finish is applied to complement the R6's bodywork while making a statement of its own. The gloss black brings a classic, circuit-ready authority; matte black offers an understated aggression; and gold references the podium liveries that put OZ wheels on the map.\u003c\/p\u003e\u003cp\u003eEvery detail — from the spoke geometry to the valve angle — reflects OZ's racing DNA. This is not a road wheel adapted for track use; it is a purpose-built racing wheel that happens to fit directly in place of the standard unit.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eForged magnesium is the material of choice in professional motorsport precisely because it offers the highest strength-to-weight ratio available at this scale. By lowering the rotating mass at both ends of the R6, the Cattiva set reduces the gyroscopic effect that resists steering input, allowing the bike to change direction with a precision and ease that cast aluminium wheels simply cannot match. The effect on braking is equally significant: less rotating inertia means the wheel responds faster to brake input, shortening stopping distances and improving feel at the lever.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the Yamaha YZF-R6 across all model years from 2003 to 2016. Bearings, angled aluminium valves and spacers are included in the set. A sprocket carrier is also supplied; riders should note that the original rear sprocket is not compatible and a new sprocket will be required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: Forged magnesium\u003c\/li\u003e\n\u003cli\u003eConstruction: Forged\u003c\/li\u003e\n\u003cli\u003eSpoke configuration: Six-spoke\u003c\/li\u003e\n\u003cli\u003ePart numbers: C3026YA35 (front) + C6032YA55X (rear)\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6, 2003–2016\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: Track \/ racing\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167401500938,"sku":"C3026YA35+C6032YA55X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167401533706,"sku":"C3026YA35+C6032YA55X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167401566474,"sku":"C3026YA35+C6032YA55X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_9a2702c5-56c5-48e1-87da-4b3ad6314d5c.png?v=1780797028"},{"product_id":"oz-cattiva-magnesium-set-yamaha-r6-rj27","title":"OZ Cattiva Magnesium Wheel Set Yamaha YZF-R6 RJ27 (2017–2026)","description":"\u003cp\u003eDeveloped by the OZ SBK Racing division, the Cattiva is the lightest wheel OZ produces — a forged magnesium construction engineered exclusively for track use. Fitted to the Yamaha YZF-R6 RJ27, this wheel set delivers a dramatic reduction in rotating mass that sharpens steering response, elevates cornering agility and raises the performance ceiling of one of the finest supersport machines ever built.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction — the lightest wheel in the entire OZ range, purpose-built for competitive track use\u003c\/li\u003e\n\u003cli\u003eDramatic reduction in rotating mass for faster steering response, improved braking performance and more precise handling dynamics\u003c\/li\u003e\n\u003cli\u003eComplete set includes front and rear wheels, quality bearings, aluminium angled valves and spacers where required\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — note that the original Yamaha rear sprocket is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eDirect replacement for the factory wheels on the Yamaha YZF-R6 RJ27 (2017–2026) — no modifications required\u003c\/li\u003e\n\u003cli\u003eMade in Italy by OZ's SBK Racing department to exacting motorsport standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing Pedigree and Build Quality\u003c\/h2\u003e\u003cp\u003eThe Cattiva name carries genuine motorsport credentials. Born out of OZ's Superbike racing programme, every wheel in this series is forged from premium magnesium alloy — a material chosen specifically because it combines exceptional strength with the lowest possible weight. The forging process aligns the grain structure of the metal, producing a wheel that is not only lighter than cast aluminium alternatives but structurally superior under the cyclic stresses of hard track riding. The result is a product that genuine racing professionals trust, now available in a direct-fit package for the RJ27-generation R6.\u003c\/p\u003e\u003ch2\u003eTrack Performance\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the most effective ways to improve a motorcycle's dynamic response. Lighter wheels mean the suspension can react more quickly to surface changes, braking distances shorten, and the chassis pivots more freely through direction changes. On a circuit where tenths of a second matter, the Cattiva set gives the YZF-R6 RJ27 a measurable advantage — not just in outright lap time, but in the consistency and confidence a rider feels lap after lap. Available in gloss black, matte black and gold finishes, the set also makes an unmistakable visual statement in the paddock.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct, bolt-on replacement for the standard wheels on the Yamaha YZF-R6 RJ27. The following model year range is covered:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 RJ27 — 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003ePlease note: the original Yamaha rear sprocket is not compatible with the included rear sprocket carrier. A suitable aftermarket or OZ-compatible rear sprocket must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eWheel set: front and rear\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6 RJ27 (2017–2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ racing\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167401599242,"sku":"C3177YA35X+C6247YA55X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167401632010,"sku":"C3177YA35X+C6247YA55X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167401664778,"sku":"C3177YA35X+C6247YA55X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_f8db177a-c095-4d67-8e35-76d97b2957df.png?v=1780797029"},{"product_id":"oz-cattiva-magnesium-set-yamaha-r1","title":"OZ Cattiva Magnesium Wheel Set Yamaha YZF-R1\/M RN32, RN49 \u0026 RN65 (2015-2026)","description":"\u003cp\u003eThe OZ Cattiva wheel set brings genuine SBK racing pedigree to your Yamaha YZF-R1 or R1M without the complexity of a custom build. Designed by OZ's renowned racing division and forged from high-strength magnesium, this front-and-rear set is the lightest wheel offering in the entire OZ catalogue — a direct, bolt-on upgrade that delivers measurable gains in responsiveness and agility every time you ride, whether that's a Sunday morning blast or a full track day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightest wheel in OZ's range: forged magnesium construction keeps rotating mass to an absolute minimum, sharpening steering input and reducing unsprung weight for noticeably quicker direction changes.\u003c\/li\u003e\n\u003cli\u003eComplete, ready-to-fit set: includes front wheel, rear wheel, quality bearings and aluminium angled valves — everything needed for a clean, straightforward swap.\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included: a dedicated carrier is supplied in the set; note that the original Yamaha sprocket is not compatible and a replacement will be required.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment: designed to exchange directly with the stock wheels on the Yamaha YZF-R1\/M RN32, RN49 and RN65 (2015-2026) — no modifications, no adapters.\u003c\/li\u003e\n\u003cli\u003eMade in Italy by OZ's SBK racing department: the same manufacturing expertise and quality standards behind championship-winning machinery, brought to production form.\u003c\/li\u003e\n\u003cli\u003eAvailable in three finishes: gloss black, matte black and gold — choose the look that suits your bike's livery.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance Without Compromise\u003c\/h2\u003e\u003cp\u003eForged magnesium sits at the top of the materials hierarchy for performance wheels. Compared to cast aluminium, it offers a superior strength-to-weight ratio, and because the Cattiva is already the lightest wheel OZ produces, the gains in rotational inertia are genuine and rider-perceptible. Acceleration feels crisper, braking transitions are more progressive, and mid-corner adjustments require less effort. These are not marginal improvements — they are the kind of dynamic shifts that make a good motorcycle feel exceptional.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Longevity\u003c\/h2\u003e\u003cp\u003eOZ's Italian manufacturing tradition means the Cattiva is not a race-only consumable. The forged construction produces a denser, more consistent grain structure than casting, which translates into long-term durability under repeated thermal and mechanical cycling. The included bearings and aluminium angled valves are selected to complement the wheel's performance credentials, so the entire assembly meets the same standard from the first fitting onwards.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN32 (2015-2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN32 (2015-2016)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN49 (2017-2020)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN49 (2017-2020)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN65 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN65 (2021-2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImportant: the original Yamaha rear sprocket is not compatible with the supplied carrier. A suitable aftermarket or OZ-compatible sprocket must be fitted when installing this set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eCattiva\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged magnesium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSet contents\u003c\/td\u003e\n\u003ctd\u003eFront wheel, rear wheel, bearings, aluminium angled valves, rear sprocket carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R1\/M RN32, RN49 \u0026amp; RN65 (2015-2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167401926922,"sku":"C3177YA35X+C6209YA60X_sg","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167401959690,"sku":"C3177YA35X+C6209YA60X_sm","price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167401992458,"sku":"C3177YA35X+C6209YA60X_g","price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_946f44f2-427b-4583-9dc6-c70d61e14c7e.png?v=1780797036"},{"product_id":"oz-piega-aluminium-set-aprilia-rsv4-09-16","title":"OZ Piega Forged Aluminium Wheel Set for Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016)","description":"\u003cp\u003eBorn in the OZ SBK Racing department and proven at the highest levels of circuit competition, the Piega five-spoke forged aluminium wheel set delivers a measurable reduction in rotating mass that sharpens turn-in, accelerates faster out of corners and keeps the Aprilia RSV4 planted at track speeds. Every gram saved at the rim pays dividends the moment you tip into a bend — this is performance engineering you feel immediately.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed directly by OZ's SBK Racing division for maximum stiffness-to-weight ratio\u003c\/li\u003e\n\u003cli\u003eForged from premium-grade aluminium — dramatically lighter than cast alternatives, reducing unsprung and rotating mass simultaneously\u003c\/li\u003e\n\u003cli\u003eComplete front-and-rear set: 1x front wheel and 1x rear wheel supplied together\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angled valves and spacers (fitted as required), plus a sprocket carrier — note the original rear sprocket is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the original Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF wheels (2009–2016): no modifications required\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ Racing's exacting production standards for long-term reliability on road and track\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Focused Engineering for the Street\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective performance modifications available to a superbike rider. Unlike power additions that demand complementary chassis work, lighter wheels improve every dynamic simultaneously: acceleration, braking, steering response and mid-corner stability. The Piega's forged construction achieves this while retaining the structural integrity demanded by sustained high-speed track use — the same fundamental design philosophy that OZ applies to its World Superbike programmes.\u003c\/p\u003e\u003cp\u003eThe five-spoke architecture is not purely aesthetic. Each spoke is profiled to balance flex resistance under braking loads with lateral rigidity through fast directional changes. Whether you are on track chasing lap times or on open roads where feel and feedback are paramount, the Piega set transforms the character of the RSV4 platform.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eOZ manufactures the Piega set entirely in Italy, applying the same quality controls used across its motorsport catalogue. Three finish options are available — gloss black anodised, techno black anodised and techno gold anodised — each processed to resist corrosion and retain its appearance through repeated track weekends and road use. Anodising penetrates the aluminium surface rather than sitting on top of it, providing durability that paint cannot match.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Aprilia RSV4, RSV4 Factory, RSV4 R, RSV4 RR and RSV4 RF across model years 2009 to 2016. The set replaces the original wheels on a direct-fit basis. A compatible sprocket carrier is included; however, the original rear sprocket will not fit and must be sourced separately. Spacers are included and fitted only where required by the installation.\u003c\/p\u003e\u003cp\u003ePart numbers: P3065AP35 (front) + P6095AP60 (rear).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ Racing\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eSpoke configuration: 5-spoke\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3065AP35 + P6095AP60\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 Factory \/ RSV4 R \/ RSV4 RR \/ RSV4 RF (2009–2016)\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402057994,"sku":"P3065AP35+P6095AP60_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167402090762,"sku":"P3065AP35+P6095AP60_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167402123530,"sku":"P3065AP35+P6095AP60_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy.png?v=1780797041"},{"product_id":"oz-piega-aluminium-set-aprilia-rsv4-17-20","title":"OZ Piega Forged Aluminium Wheel Set for Aprilia RSV4 \/ RSV4 1100 Factory \/ RF \/ RR (2017–2020)","description":"\u003cp\u003eBorn in OZ's SBK Racing division, the Piega wheel set brings genuine superbike-championship pedigree to your Aprilia RSV4. Forged from premium-grade aluminium and shaped into a purposeful five-spoke architecture, these wheels slash rotating mass to sharpen steering response, accelerate direction changes and liberate every fraction of the RSV4's power — on the track and on the road alike.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department — form follows race function.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass for measurably faster steering and improved agility at high speed.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for the standard Aprilia RSV4 \/ RSV4 1100 Factory \/ RF \/ RR (2017–2020) wheels — no modification required.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel and one rear wheel with high-quality bearings, aluminium angled valves, and spacers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eRear wheel supplied with a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting racing-grade production standards for long-term reliability at the limit.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack-Bred Performance on the Road\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating weight is one of the most effective performance upgrades available on any motorcycle. Less rotational inertia means the RSV4's engine spends less energy accelerating the wheels, translating into crisper throttle response, shorter braking distances and a chassis that changes direction with race-bred precision. The Piega's geometry has been validated in Superbike competition, so every dimension — spoke profile, rim width, hub offset — has been optimised for the demands of a high-power V4 platform rather than adapted from a generic design.\u003c\/p\u003e\u003ch2\u003eEngineering \u0026amp; Finish\u003c\/h2\u003e\u003cp\u003eOZ uses a hot-forging process that aligns the grain structure of the aluminium for superior strength-to-weight ratio compared with cast alternatives. The result is a wheel that is simultaneously lighter and more rigid — exactly what is needed to keep a 200-plus-horsepower RSV4 planted under hard braking and through fast sweepers. Three anodised finishes are available: gloss black anodised, techno black anodised, and techno gold anodised, each applied to the forged surface to resist corrosion and maintain appearance after prolonged track and road use.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set has been developed specifically for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 R (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe wheels are a direct replacement for the OEM rims. A compatible rear sprocket must be sourced separately as the original item does not fit the supplied sprocket carrier.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3065AP35 (front) + P6095AP60 (rear)\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eSpoke design: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eDevelopment origin: OZ SBK Racing division\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIncludes: 1x front wheel, 1x rear wheel, high-quality bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eCompatibility: Aprilia RSV4 \/ RSV4 1100 Factory \/ RF \/ RR (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402352906,"sku":"P3065AP35+P6095AP60_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167402385674,"sku":"P3065AP35+P6095AP60_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167402418442,"sku":"P3065AP35+P6095AP60_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_42b81173-27c6-4d14-908c-83f4c3451994.png?v=1780797043"},{"product_id":"oz-piega-aluminium-set-aprilia-rsv4","title":"OZ Piega Forged Aluminium Wheel Set for Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026)","description":"\u003cp\u003eEngineered by OZ's SBK Racing division and manufactured in Italy, the Piega wheel set brings a genuine reduction in rotating mass to the Aprilia RSV4, RSV4 RR and RSV4 1100 Factory — translating directly into sharper turn-in, faster direction changes and greater stability at speed, whether you are threading traffic on a Sunday morning or chasing lap times at the circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department for the optimal balance of rigidity and weight saving.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction delivers the strength needed for track use while keeping unsprung and rotating mass to a minimum.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear wheel set supplied together — one front and one rear wheel included.\u003c\/li\u003e\n\u003cli\u003ePremium bearings, aluminium angled valves and spacers (fitted only where required) are included in the box.\u003c\/li\u003e\n\u003cli\u003eSprocket carrier included — note that the original Aprilia sprocket does not fit and a compatible replacement must be used.\u003c\/li\u003e\n\u003cli\u003eDirect drop-in replacement for the standard Aprilia RSV4 \/ RR \/ 1100 Factory wheels; no modification required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting production standards for long-term reliability on road and track.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to sharpen a motorcycle's responses without touching the suspension or engine. The Piega's forged aluminium spokes shed weight where it matters most — at the rim — so the RSV4 reacts more keenly to steering inputs, stops with greater urgency and changes direction with noticeably less effort. At motorway speeds and on fast, flowing circuit sections that same mass reduction contributes to a more planted, composed feel. The five-spoke architecture is not merely aesthetic; the spoke geometry is tuned to distribute load evenly around the rim under hard braking, cornering and acceleration forces, making the Piega equally at home on a daily road commute and a weekend track day.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eOZ has manufactured competition wheels for World Superbike, MotoGP and endurance racing for decades, and the Piega carries that heritage into a road-legal package. Each wheel is forged — not cast — meaning the aluminium grain structure is aligned for superior fatigue resistance under the cyclic loads that high-performance riding generates. The finish options (gloss black anodised, techno black anodised and techno gold anodised) are applied after machining so they conform precisely to the final surface contour, providing both corrosion protection and a finish that ages well under the heat cycles a race-prepared or hard-ridden RSV4 will produce.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and tested specifically for the following Aprilia models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2021–2026)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2021–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe wheels are a direct replacement for the OEM items; standard spacers are included where needed. A compatible sprocket carrier is supplied, but the original Aprilia rear sprocket will not fit — please ensure a compatible rear sprocket is sourced alongside this wheel set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: P3065AP35 (front) + P6095AP60 (rear)\u003c\/li\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: 5-spoke Piega, developed by OZ SBK Racing\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Aprilia RSV4 \/ RSV4 RR \/ RSV4 1100 Factory, 2021–2026\u003c\/li\u003e\n\u003cli\u003eScope of supply: 1x front wheel, 1x rear wheel, bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eIntended use: road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402483978,"sku":"P3065AP35+P6095AP60_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167402516746,"sku":"P3065AP35+P6095AP60_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167402549514,"sku":"P3065AP35+P6095AP60_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_15047252-93e6-4fed-8306-731bca4686e3.png?v=1780797044"},{"product_id":"oz-cattiva-magnesium-set-bmw-k66","title":"OZ Cattiva Magnesium Wheel Set BMW M1000RR K66 (2021-2026)","description":"\u003cp\u003eForged from premium magnesium by OZ's SBK Racing division, the Cattiva wheel set represents the pinnacle of Italian wheel engineering for the BMW M1000RR K66. As the lightest wheel in the entire OZ range, the Cattiva is built exclusively for track use — where reducing rotating mass translates directly into sharper turn-in, faster acceleration and heightened agility at race speeds.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged magnesium construction: the lightest wheel OZ produces, delivering a meaningful reduction in unsprung and rotating mass for immediate handling gains.\u003c\/li\u003e\n\u003cli\u003eDeveloped by OZ's SBK Racing department: the Cattiva design is born from top-level superbike competition, not adapted from a road wheel.\u003c\/li\u003e\n\u003cli\u003eDirect replacement fitment: the set exchanges directly with the original BMW M1000RR K66 factory wheels — no fabrication or modification required.\u003c\/li\u003e\n\u003cli\u003eComplete track-ready package: includes front and rear wheels, high-quality bearings, aluminium angle valves and spacers (fitted as required).\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included: a dedicated carrier is supplied as standard; note that the original BMW rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: manufactured to OZ's exacting quality standards, balancing race-level performance with long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe Cattiva's forged magnesium structure sets it apart from cast aluminium alternatives. Magnesium alloy offers an exceptional strength-to-weight ratio, and the forging process aligns the grain structure of the metal for superior fatigue resistance under the cyclic stresses of repeated braking and cornering on circuit. Every detail — from the precision-machined spoke geometry to the quality bearings included in the set — reflects the manufacturing discipline expected of a wheel designed for outright competition.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass at the wheel has a compounding effect on motorcycle dynamics. The BMW M1000RR K66 already responds with precision, but fitting the Cattiva set sharpens that response further: the engine needs less effort to accelerate the wheel, braking distances can tighten as deceleration forces act on lighter rims, and mid-corner balance improves as gyroscopic forces are reduced. For riders pushing the M1000RR to its limits on circuit, these gains are tangible lap after lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThese wheels are designed exclusively for the BMW M1000RR K66 spanning model years 2021 to 2026. They are not compatible with any other BMW model or variant. The included rear sprocket carrier is required for correct installation; the original BMW rear sprocket must be replaced as it is not compatible with the Cattiva hub design.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Cattiva\u003c\/li\u003e\n\u003cli\u003eMaterial: forged magnesium\u003c\/li\u003e\n\u003cli\u003eType: wheel set (front and rear)\u003c\/li\u003e\n\u003cli\u003eFitment: BMW M1000RR K66 (2021-2026)\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ racing\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, bearings, aluminium angle valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black","offer_id":53167402582282,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Matte Black","offer_id":53167402615050,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false},{"title":"Gold","offer_id":53167402647818,"sku":null,"price":4065.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/CattivaSetBlackGlossy_57d2d89f-3c34-4980-9c89-afe403583899.png?v=1780797046"},{"product_id":"oz-piega-aluminium-felgen-set-bmw-k46","title":"OZ Piega Forged Aluminium Wheel Set for BMW S1000RR K46 (2009-2018)","description":"\u003cp\u003eThe OZ Piega wheel set transforms the BMW S1000RR K46 into a sharper, more responsive machine without compromise. Engineered by OZ's SBK Racing division and forged from premium aluminium, this five-spoke set delivers a meaningful reduction in rotating mass — making every input from the bars or the pegs feel more direct, more immediate, and more rewarding mile after mile.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department for proven race and road performance\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass for faster steering response and more precise cornering\u003c\/li\u003e\n\u003cli\u003eComplete set includes front wheel (3.50 x 17) and rear wheel (5.50 x 17) ready to replace the original cast wheels\u003c\/li\u003e\n\u003cli\u003eSupplied with premium bearings, aluminium angled valves, and spacers where required\u003c\/li\u003e\n\u003cli\u003eIncludes a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced\u003c\/li\u003e\n\u003cli\u003eDirect OEM fitment for BMW S1000RR K46 (2009-2018) equipped with cast wheels — no modifications required\u003c\/li\u003e\n\u003cli\u003eMade in Italy with OZ's exacting manufacturing standards for long service life and reliable performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuilt for the Rider Who Demands More\u003c\/h2\u003e\u003cp\u003eForged aluminium is the benchmark material for serious motorcycle wheels. Compared with the standard cast items, forged construction produces a denser, more consistent grain structure that is simultaneously lighter and stronger. On the S1000RR K46 this translates into a front end that turns in with noticeably less effort and a rear that tracks more faithfully through a series of fast corners. Whether you are threading through traffic on a long road ride or chasing lap times on track, the reduction in unsprung and rotating mass lets the suspension work more effectively and keeps the tyres in better contact with the surface.\u003c\/p\u003e\u003ch2\u003eOZ SBK Racing Heritage\u003c\/h2\u003e\u003cp\u003eOZ Racing has supplied wheels to factory superbike and MotoGP teams for decades. The Piega range is the direct road and trackday expression of that competition engineering, carrying the same five-spoke aesthetic seen in World Superbike paddocks into a form that fits directly onto production machines. Part numbers P3063BM35 (front) and P6094BM60 (rear) are specific to the S1000RR K46 generation, ensuring tolerances are matched to the BMW factory specification rather than adapted from a generic fitment.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K46 produced from 2009 to 2018. It is intended as a direct replacement for the original cast wheel option on that model. Bikes fitted with the optional OEM forged wheels from the factory may have different bearing or sprocket carrier arrangements — please verify your existing specification before ordering. A replacement sprocket carrier is included, but the original BMW rear sprocket must be replaced as it is not compatible with the OZ carrier.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3063BM35 (front) + P6094BM60 (rear)\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46, 2009-2018 (cast wheel models)\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, premium bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402680586,"sku":"P3063BM35+P6094BM60_sg","price":2668.8,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167402713354,"sku":"P3063BM35+P6094BM60_tb","price":2668.8,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167402746122,"sku":"P3063BM35+P6094BM60_tg","price":2668.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_6248686b-3884-4502-9443-a9cb2bf8bed2.png?v=1780797047"},{"product_id":"oz-piega-aluminium-set-ducati-panigale-899","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale 899 (2013-2016)","description":"\u003cp\u003eBorn in OZ's SBK Racing division, the Piega forged aluminium wheel set delivers the kind of rotational mass reduction that transforms how the Ducati Panigale 899 steers, changes direction, and settles under braking — on road and track alike. Every pair is manufactured in Italy to the exacting quality standards that have made OZ a benchmark name in motorsport.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's SBK Racing department for maximum stiffness-to-weight performance.\u003c\/li\u003e\n\u003cli\u003eForged high-grade aluminium construction — lighter than cast alternatives, stronger under sustained track loads.\u003c\/li\u003e\n\u003cli\u003eSignificant reduction in rotating unsprung mass for sharper steering response, improved agility, and greater high-speed stability.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) — direct replacements for the Panigale 899 OEM wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angled valves, and spacers (fitted only where required), plus a dedicated sprocket carrier (note: the original rear sprocket is not compatible with this carrier).\u003c\/li\u003e\n\u003cli\u003eMade in Italy — OZ's hallmark of manufacturing precision, long-term reliability, and consistent finish quality.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing the gyroscopic inertia of the wheel set makes the Panigale 899 more willing to tip into corners and more responsive when flicking between apexes — changes that feel immediate from the first ride. The five-spoke layout optimises rigidity under braking and traction loads without adding unnecessary material, keeping the wheel as light as the forging process allows. Whether the bike sees weekend canyon runs or regular circuit days, the Piega set raises the dynamic ceiling of the 899 platform in a way that chassis tuning alone cannot match.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eOZ applies the same forging and finishing processes to these road-legal wheels as to their race-homologated products. Available in three anodised finishes — gloss black, techno black, and techno gold — each colour is applied to the forged billet before final machining, ensuring the finish is integral to the wheel rather than a surface coating that can chip or flake. The result is a wheel that looks as purposeful as it performs, and that maintains its appearance under the thermal and mechanical demands of track use.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and validated specifically for the Ducati Panigale 899, model years 2013 to 2016. It replaces the OEM wheels on a like-for-like basis with no frame or swingarm modifications required. Important: the original Ducati rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket suited to the OZ carrier must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: P3102DU35 (front) + P6184DU55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402844426,"sku":"P3102DU35+P6184DU55_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167402877194,"sku":"P3102DU35+P6184DU55_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167402909962,"sku":"P3102DU35+P6184DU55_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_ce099549-558f-4e65-859b-bf826f9469fa.png?v=1780797052"},{"product_id":"oz-piega-aluminium-felgen-set-ducati-panigale-959","title":"OZ Piega Forged Aluminium Wheel Set – Ducati Panigale 959 (2016-2019)","description":"\u003cp\u003eBorn in OZ's SBK racing department, the Piega wheel set brings genuine motorsport engineering to your Ducati Panigale 959. The five-spoke forged aluminium construction trims rotational mass precisely where it counts, rewarding you with sharper turn-in, more responsive handling and a ride that stays composed whether you are threading through city traffic or pushing hard on track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed directly by the OZ SBK Racing division — not an aftermarket adaptation but a purpose-built performance wheel.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotational mass, improving acceleration, braking response and directional agility compared to the standard cast wheels.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), both machined as direct replacements for the Ducati Panigale 959 factory wheels.\u003c\/li\u003e\n\u003cli\u003eShips with quality bearings, aluminium angled valves and spacers (where required), plus a dedicated rear sprocket carrier — note that the original Ducati rear sprocket does not fit the new carrier.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards, guaranteeing long-term reliability under repeated road and track use.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotational mass is one of the most effective ways to transform the feel of a motorcycle, and the Piega set makes that improvement immediately apparent. Steering becomes more intuitive at corner entry, the front end communicates with greater clarity under braking, and the whole package feels more alive at speed. The rigid five-spoke geometry maintains lateral stiffness even under the hard lateral loads generated during aggressive cornering, giving you a confident, consistent feel lap after lap.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eOZ has manufactured racing wheels for MotoGP, World Superbike and Formula 1 for decades, and the same manufacturing philosophy flows into the Piega road and track range. Each wheel is forged rather than cast, a process that aligns the grain structure of the aluminium for a superior strength-to-weight ratio. The finish options — gloss black anodised, techno black anodised, and techno gold anodised — are applied with the same durability standards OZ applies to its competition products, resisting brake dust, stone chips and the thermal cycles of hard riding.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Ducati Panigale 959 across all model years from 2016 to 2019. It is a direct bolt-on replacement for the factory wheels. A new rear sprocket carrier is included; the original Ducati rear sprocket is not compatible with it and must be replaced when fitting this set. Part numbers: P3102DU35 (front) and P6184DU55 (rear).\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3102DU35 + P6184DU55\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 959 (2016-2019)\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167402975498,"sku":"P3102DU35+P6184DU55_sg","price":2494.08,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167403008266,"sku":"P3102DU35+P6184DU55_tb","price":2494.08,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167403041034,"sku":"P3102DU35+P6184DU55_tg","price":2494.08,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_0ae576b4-bae1-4a0b-90e8-b26c34db9e95.png?v=1780797055"},{"product_id":"oz-piega-aluminium-set-ducati-panigale-1199","title":"OZ Piega Forged Aluminium Wheel Set – Ducati Panigale 1199\/R\/S (2012-2017)","description":"\u003cp\u003eBorn in the OZ SBK Racing department and trusted by riders who demand verifiable performance, the OZ Piega wheel set brings race-proven, forged aluminium construction to the Ducati Panigale 1199, 1199 R and 1199 S. Reduced rotating mass translates directly into sharper turn-in, faster direction changes and measurably improved ride dynamics — whether you are chasing lap times or carving your favourite road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by the OZ SBK Racing division for maximum rigidity and minimal unsprung weight.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction — stronger and lighter than cast alternatives, engineered to meet the demands of both road and track use.\u003c\/li\u003e\n\u003cli\u003eComplete set: front wheel (3.50 x 17) and rear wheel (5.50 x 17) included, with direct fitment to the Ducati Panigale 1199\/R\/S (2012–2017) as a direct replacement for the OEM wheels.\u003c\/li\u003e\n\u003cli\u003ePremium bearings, aluminium angled valves and spacers (where required) supplied as standard.\u003c\/li\u003e\n\u003cli\u003eRear wheel includes a sprocket carrier — note that the original OEM sprocket is not compatible and a replacement will be required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: OZ's Italian manufacturing heritage guarantees consistent quality and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to improve a motorcycle's dynamic response, and the Piega set delivers exactly that. The five-spoke geometry distributes stress efficiently across the rim, maintaining outstanding stability at high speeds while shaving grams where they matter most. Riders familiar with the Panigale 1199 platform will notice the benefit immediately — crisper throttle response on exit and a more communicative front end under braking.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eEach OZ Piega wheel is forged from premium-grade aluminium, a process that aligns the grain structure of the metal for superior fatigue resistance compared to casting. The finish — available in gloss black anodised, techno black anodised or techno gold anodised — is applied to the same exacting standard used on OZ's competition wheels, providing lasting corrosion resistance alongside a distinctive race aesthetic. The part numbers for this set are P3102DU35 (front) and P6012DU60 (rear).\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eDucati Panigale 1199 (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 R (2012–2017)\u003c\/li\u003e\n\u003cli\u003eDucati Panigale 1199 S (2012–2017)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe wheels are a direct replacement for the OEM items. Please note that the standard Ducati sprocket is not compatible with the OZ sprocket carrier supplied; a suitable aftermarket or OZ-compatible rear sprocket must be used.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3102DU35 (front) + P6012DU60 (rear)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: premium bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403172106,"sku":"P3102DU35+P6012DU60_sg","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167403204874,"sku":"P3102DU35+P6012DU60_tb","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167403237642,"sku":"P3102DU35+P6012DU60_tg","price":2293.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy.png?v=1780797062"},{"product_id":"oz-piega-aluminium-felgen-set-ducati-panigale-1299-s","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale 1299\/S (2015-2018)","description":"\u003cp\u003eDeveloped by OZ's SBK Racing division, the Piega forged aluminium wheel set is a direct-fit upgrade for the Ducati Panigale 1299\/S that pays dividends every time you leave the garage — sharper turn-in on the daily commute, more confidence mid-corner on a Sunday blast, and genuine weight savings that let the engine's character shine through. This is one of the most straightforward performance upgrades available for the 1299 platform.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's SBK Racing department, balancing stiffness and low rotational mass for real-world ride improvement.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces unsprung and rotating weight compared to the stock cast wheels, enhancing agility and steering response at all speeds.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), both sized as direct replacements for the Panigale 1299\/S originals.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angled valve stems, and spacers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eIncludes a rear sprocket carrier — note that the original Ducati rear sprocket is not compatible and will need to be replaced.\u003c\/li\u003e\n\u003cli\u003eDual-purpose design equally at home on road and track, with no compromise between everyday usability and performance-focused riding.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the most efficient ways to improve a motorcycle's dynamics. By spinning lighter wheels, the Panigale 1299\/S responds more eagerly to throttle inputs, brakes with greater precision, and changes direction with noticeably less effort through tight sequences. The Piega's five-spoke geometry was refined in Superbike competition, so the stiffness-to-weight ratio is optimised rather than simply minimised — you get wheels that hold their line under hard braking without sacrificing the suppleness needed for bumpy road surfaces.\u003c\/p\u003e\u003ch2\u003eEveryday Usability and Value\u003c\/h2\u003e\u003cp\u003eUnlike dedicated race wheels that demand constant attention, the OZ Piega set is designed for regular road use. The anodised finish resists corrosion from road grime and brake dust, and the included quality bearings are built to withstand the thermal cycling of street riding. Part numbers P3102DU35 (front) and P6012DU60 (rear) confirm these are purpose-engineered for the 1299 platform rather than adapted from a generic catalogue — fitment is precise and installation is straightforward for any competent workshop.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed specifically for the Ducati Panigale 1299 and 1299 S, model years 2015 to 2018. The wheels are a direct swap for the original equipment wheels. Please note that the factory rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket will be required at the time of fitment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3102DU35 (front) + P6012DU60 (rear)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale 1299 \/ 1299 S (2015-2018)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403270410,"sku":"P3102DU35+P6012DU60_sg","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167403303178,"sku":"P3102DU35+P6012DU60_tb","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167403335946,"sku":"P3102DU35+P6012DU60_tg","price":2293.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_9310ec5a-2093-41ec-8351-bfb603e583ed.png?v=1780797067"},{"product_id":"oz-piega-aluminium-set-ducati-panigale-v4","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale V4\/S\/R (2018-2024)","description":"\u003cp\u003eDeveloped by OZ's SBK Racing division, the Piega wheel set brings genuine superbike engineering to your Ducati Panigale V4, V4 S or V4 R. Forged from high-grade aluminium and validated against the demands of world-level circuit racing, these wheels are built to meet the strictest performance and safety standards — on the road and on the track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's SBK Racing department for maximum structural integrity under race conditions\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass significantly, sharpening steering response and improving agility at all speeds\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the original Ducati Panigale V4\/S\/R wheels — no modifications required\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17)\u003c\/li\u003e\n\u003cli\u003eSupplied with premium-grade bearings, aluminium angled valves and spacers where required, plus a rear sprocket carrier (note: the original Ducati rear sprocket is not compatible)\u003c\/li\u003e\n\u003cli\u003eMade in Italy — OZ's Italian manufacturing heritage ensures consistent quality and long-term durability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing DNA, Road Registered\u003c\/h2\u003e\u003cp\u003eThe Piega series sits at the core of OZ's competition programme. The five-spoke geometry is not a styling exercise — it is the direct result of finite-element analysis carried out by OZ's racing engineers to balance stiffness, weight and fatigue resistance in a single forged structure. Lower rotating mass reduces the gyroscopic effect at each axle, which translates into a motorcycle that changes direction more readily, responds to braking inputs faster and feels more connected through fast, sweeping corners.\u003c\/p\u003e\u003cp\u003eBecause the wheel set is a like-for-like swap with the factory wheels, you retain all standard tyre sizes and brake caliper positions. There is no compromise to ride quality or safety — simply a measurable improvement in dynamic performance that becomes apparent the first time you tip into a demanding corner.\u003c\/p\u003e\u003ch2\u003eBuild Quality\u003c\/h2\u003e\u003cp\u003eOZ has manufactured forged aluminium wheels for MotoGP, Superbike World Championship and national race series for decades. The Piega set carries that pedigree into a package designed for owners who demand race-proven quality on road-registered machinery. Every wheel is produced at OZ's facility in Italy and undergoes strict quality control before leaving the factory. The included bearings and ancillary hardware are specified to the same standard as the wheels themselves, so the complete installation is consistent from the outset.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed specifically for the Ducati Panigale V4, V4 S and V4 R produced between 2018 and 2024. It is a direct replacement for the original wheels. The original Ducati rear sprocket is not compatible; a new sprocket carrier is included in the set and an appropriate rear sprocket must be sourced separately. Part number: P3102DU35+P6012DU60.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003ePart number: P3102DU35+P6012DU60\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati Panigale V4 \/ V4 S \/ V4 R (2018-2024)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403368714,"sku":"P3102DU35+P6012DU60_sg","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167403401482,"sku":"P3102DU35+P6012DU60_tb","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167403434250,"sku":"P3102DU35+P6012DU60_tg","price":2293.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_7788d586-1093-47b1-b622-fb8a154049d0.png?v=1780797068"},{"product_id":"oz-piega-aluminium-felgen-set-ducati-panigale-v2","title":"OZ Piega Forged Aluminium Wheel Set for Ducati Panigale V2 955 (2020-2024)","description":"\u003cp\u003eBorn in OZ's SBK Racing division and shaped by the demands of world-class superbike competition, the Piega forged aluminium wheel set raises the performance ceiling of the Ducati Panigale V2 955 in a way that no cast alternative can match. Every gram saved from rotating mass translates directly into sharper turn-in, faster acceleration response and a more connected feel through every corner — on road or track.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers exceptional rigidity with a dramatically reduced rotating mass compared to OEM wheels, improving handling precision and response.\u003c\/li\u003e\n\u003cli\u003eThe five-spoke Piega design was developed specifically by OZ's SBK Racing department, optimising load paths for high-speed stability and agility in equal measure.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), engineered as a direct OEM replacement for the Panigale V2 955.\u003c\/li\u003e\n\u003cli\u003eEach set ships complete with durable bearings, aluminium angled valves, spacers where required, and a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards, guaranteeing consistent quality and long service life whether the bike is ridden daily or pushed hard on track.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eOZ's forging process compresses the aluminium under enormous pressure, aligning the grain structure of the metal for superior strength-to-weight performance that casting simply cannot replicate. The result is a wheel that is simultaneously lighter, stiffer and more fatigue-resistant than a stock unit. The finish — available in gloss black anodised, techno black anodised or techno gold anodised — is applied after machining to ensure the surface treatment sits on a perfectly true and balanced rim.\u003c\/p\u003e\u003cp\u003eThe anodised finish is not merely cosmetic. It provides a hard, corrosion-resistant layer that holds up to road grime, brake dust and track abuse without chipping or flaking. The attention to detail extends to every component in the kit: precision bearings, machined aluminium angled valves and correctly dimensioned spacers ensure that fitting is straightforward and that geometry is preserved exactly as intended.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the highest-return modifications available for a performance motorcycle. With the Piega set fitted, the Panigale V2 955 benefits from more precise steering, improved braking feel and faster directional changes — qualities that matter as much on a demanding mountain road as they do on a circuit. The five-spoke architecture balances torsional stiffness with a degree of lateral compliance that keeps tyre contact patch behaviour consistent under hard cornering loads.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed exclusively for the Ducati Panigale V2 955 produced between 2020 and 2024. It is a direct replacement for the OEM wheels, requiring no frame or swingarm modification. The included sprocket carrier is necessary as the original Ducati rear sprocket is not compatible with the OZ hub. Confirm your model year and variant before ordering; fitment details are specific to the V2 955 generation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eP3102DU35 (front) + P6012DU55 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eDucati Panigale V2 955 (2020-2024)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403598090,"sku":"P3102DU35+P6012DU55_sg","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167403630858,"sku":"P3102DU35+P6012DU55_tb","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167403663626,"sku":"P3102DU35+P6012DU55_tg","price":2293.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_b461b987-1f4c-48f8-bbd8-52ffdcfd68f4.png?v=1780797072"},{"product_id":"oz-piega-aluminium-set-honda-sc82","title":"OZ Piega Aluminium Wheel Set Honda CBR 1000 RR-R SC82 (2020–2026)","description":"\u003cp\u003eEngineered to meet the demands of both road riding and circuit work, the OZ Piega forged aluminium wheel set for the Honda CBR 1000 RR-R SC82 (2020–2026) is built to the exacting safety and quality standards that have made OZ a fixture in World Superbike paddocks. Developed directly by the OZ SBK Racing division, the five-spoke Piega design dramatically reduces rotating unsprung mass — the single most effective mechanical upgrade you can make for sharper turn-in and faster lap times.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega profile conceived by the OZ SBK Racing department — race-proven geometry transferred directly to road and track use.\u003c\/li\u003e\n\u003cli\u003eForged from premium aerospace-grade aluminium for an exceptional strength-to-weight ratio and long-term structural integrity.\u003c\/li\u003e\n\u003cli\u003eSignificantly reduced rotating mass sharpens steering response, improves mid-corner agility and reduces gyroscopic resistance at high speeds.\u003c\/li\u003e\n\u003cli\u003eComplete set: one front wheel and one rear wheel, direct-fit replacements for the Honda CBR 1000 RR-R SC82 OEM wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium-grade bearings, aluminium angled valves and spacers (fitted only where required), plus a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's stringent manufacturing quality standards, ensuring lasting reliability on road and track.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eThe Piega range sits at the intersection of Superbike racing technology and everyday rideability. On the road, the reduction in rotating inertia makes the CBR 1000 RR-R feel noticeably lighter on its feet through direction changes and when tipping into corners. On the circuit, that same characteristic translates to faster lap times, more consistent tyre behaviour and reduced fatigue over a race stint. Because the wheels are a direct OEM replacement, there is no compromise in fit, tyre clearance or brake disc compatibility — the upgrade is entirely transparent to the rest of the machine.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finishing\u003c\/h2\u003e\u003cp\u003eOZ's Italian manufacturing facility uses closed-die forging processes under strict quality controls, producing a wheel that is both stiffer and lighter than a comparable cast unit. Each finish — gloss black anodised, techno black anodised and techno gold anodised — is applied to the same exacting standards, resisting corrosion and retaining its appearance under the thermal and mechanical stress of sustained track use. Anodising penetrates the aluminium surface rather than sitting on top of it, so the finish is an integral part of the material rather than a coating that can chip or flake.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed specifically for the Honda CBR 1000 RR-R SC82 across model years 2020 to 2026. The wheels mount directly in place of the factory wheels with no modifications required to the frame, forks, swingarm, brake calipers or brake discs. A sprocket carrier is included; however, the original Honda rear sprocket is not compatible and will need to be sourced separately.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: Five-spoke\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR-R SC82, model years 2020–2026\u003c\/li\u003e\n\u003cli\u003eSet contents: 1x front wheel, 1x rear wheel, premium bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eNote: Original Honda rear sprocket is not compatible — replacement sprocket required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403696394,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167403729162,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167403761930,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_b8836d27-5371-4ae1-a136-b975d5e384f2.png?v=1780797074"},{"product_id":"oz-piega-aluminium-set-honda-sc77","title":"OZ Piega Forged Aluminium Wheel Set Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)","description":"\u003cp\u003eConceived in OZ's Superbike Racing division and refined through years of circuit competition, the Piega wheel set brings genuine race pedigree to the Honda CBR 1000 RR and SP1 SC77. Forged from premium-grade aluminium and shaped into the Piega's iconic five-spoke silhouette, this set delivers a measurable reduction in rotating mass that transforms steering response, mid-corner agility and overall composure — whether you are threading traffic on the road or chasing lap times at a trackday.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design born in OZ's SBK Racing department — proven on the world stage before reaching the road.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction offers an exceptional strength-to-weight ratio, reducing unsprung and rotating mass for sharper turn-in and faster direction changes.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: 1x front wheel (3.50 x 17) and 1x rear wheel (5.50 x 17), direct replacements for the factory Honda CBR 1000 RR \/ SP1 SC77 (2017-2019) wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality-grade bearings, aluminium angled valves and spacer washers (fitted only where required).\u003c\/li\u003e\n\u003cli\u003eIncludes a rear sprocket carrier — note that the original Honda rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards, ensuring long-term reliability on road and track alike.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Heritage\u003c\/h2\u003e\u003cp\u003eThe Piega name carries real history in motorcycle racing. Developed by OZ's dedicated SBK Racing division, the five-spoke architecture was engineered to shed weight without compromising structural integrity — a balance that defines every OZ Racing wheel. Each spoke is profiled to maximise rigidity along the primary load paths while keeping material, and therefore rotating inertia, to an absolute minimum.\u003c\/p\u003e\u003cp\u003eThe finish options — gloss black anodised, techno black anodised and techno gold anodised — give the Piega a presence that complements the CBR 1000 RR's aggressive bodywork. Anodising is not merely cosmetic: the process hardens the aluminium surface, improving resistance to corrosion, abrasion and the thermal cycling that comes with sustained hard riding. The result is a wheel that looks as purposeful as it performs, and holds its appearance season after season.\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReduced rotating mass at both ends of the motorcycle has a compounding effect on dynamic behaviour. Steering loads drop, the front wheel follows surface changes more faithfully, and the chassis reacts to body inputs with greater immediacy. At higher speeds the five-spoke structure maintains lateral stiffness, keeping tyre contact patches stable under braking and through fast direction changes. Whether the CBR 1000 RR is used primarily on public roads or committed to regular track use, the Piega set provides a tangible upgrade over the factory-fitted wheels.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Honda CBR 1000 RR and CBR 1000 RR SP1 (SC77 frame code), model years 2017 to 2019. The wheels replace the original units directly. Please note that the standard Honda rear sprocket is not compatible with the OZ sprocket carrier supplied; a suitable aftermarket rear sprocket must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFront wheel: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3212HO35 (front) + P6245HO60 (rear)\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacer washers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Honda CBR 1000 RR \/ SP1 SC77 (2017-2019)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403827466,"sku":"P3212HO35+P6245HO60_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167403860234,"sku":"P3212HO35+P6245HO60_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167403893002,"sku":"P3212HO35+P6245HO60_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_f0ae0019-79b2-462b-896b-fb665c6167a0.png?v=1780797075"},{"product_id":"oz-piega-aluminium-felgen-set-kawasaki-zx-6r","title":"OZ Piega Forged Aluminium Wheel Set Kawasaki ZX-6R \/ 636 \/ RR (2007–2026)","description":"\u003cp\u003eBorn in the OZ SBK Racing department, the Piega five-spoke wheel set is engineered for riders who demand every fraction of a second on track — and still want a wheel that transforms the ZX-6R's dynamics on the road. Forged from premium aluminium and precision-machined in Italy, this set delivers a measurable reduction in rotating mass that sharpens steering response, lightens the front end and unlocks the agility the Kawasaki ZX-6R \/ 636 \/ RR platform is famous for.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed directly by the OZ SBK Racing division for maximum rigidity at minimum weight.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass compared to cast OEM wheels, improving acceleration, braking and mid-corner feel.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) supplied together.\u003c\/li\u003e\n\u003cli\u003eKit includes quality bearings, aluminium angled valves and spacers (where required), plus a sprocket carrier — note that the original rear sprocket is not compatible with this carrier.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for Kawasaki ZX-6R \/ 636 \/ RR (2007–2026) — no modification required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability on road and track alike.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eTrack Performance by Design\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the highest-value upgrades available to any track-day or race rider. Lower rotating inertia means the engine's power reaches the tarmac more efficiently, braking distances shorten and the bike changes direction with a precision that standard cast wheels simply cannot match. The Piega's five-spoke architecture distributes stress evenly across the rim, resisting the lateral and radial loads generated under hard cornering and heavy braking without adding unnecessary material. Whether you are chasing lap times at a club circuit or pushing through a mountain pass, the difference is immediately felt through the bars and pegs.\u003c\/p\u003e\u003ch2\u003eBuild Quality \u0026amp; Finish\u003c\/h2\u003e\u003cp\u003eOZ's Italian factory subjects each Piega wheel to the same process used for its World Superbike and MotoGP programme components. The forging densifies the aluminium grain structure, producing a wheel that is simultaneously lighter and stronger than an equivalent cast item. Three anodised finishes are available — gloss black, techno black and techno gold — each applied to resist corrosion and maintain appearance under the heat and grime of sustained track use. The finish is integral to the alloy surface rather than painted on, so it will not chip or peel under race conditions.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eKawasaki ZX-6R (2007–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6R 636 (2007–2026)\u003c\/li\u003e\n\u003cli\u003eKawasaki ZX-6RR (2007–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImportant: the original Kawasaki rear sprocket is not compatible with the included sprocket carrier. A suitable aftermarket rear sprocket must be fitted. Spacers are included and should be used only where required for correct wheel alignment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3007KA35 (front) + P6019KA55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront rim size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear rim size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eConstruction: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: front wheel, rear wheel, bearings, aluminium angled valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-6R \/ 636 \/ RR (2007–2026)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167403991306,"sku":"P3007KA35+P6019KA55_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404024074,"sku":"P3007KA35+P6019KA55_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167404056842,"sku":"P3007KA35+P6019KA55_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_06fe0ea1-0eff-45b8-954c-9206023dcdcd.png?v=1780797080"},{"product_id":"oz-piega-aluminium-set-kawasaki-zx-10-r-16-20","title":"OZ Piega Forged Aluminium Wheel Set – Kawasaki ZX-10 R (2016–2020)","description":"\u003cp\u003eCrafted from premium forged aluminium by OZ's dedicated SBK Racing division, the Piega wheel set represents the pinnacle of Italian wheel engineering for the Kawasaki ZX-10 R (2016–2020). Every gram saved in rotating mass translates directly into sharper turn-in, faster acceleration response and more composed high-speed stability — whether you are logging lap times or carving canyon roads.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK Racing department — purpose-built for road and track use on the ZX-10 R.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction delivers the ideal balance between structural rigidity and minimum rotating mass.\u003c\/li\u003e\n\u003cli\u003eComplete set: 3.50 x 17 front wheel and 5.50 x 17 rear wheel, directly interchangeable with the original Kawasaki rims.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium-grade bearings, aluminium angle valves and spacers (fitted where required) for a complete installation.\u003c\/li\u003e\n\u003cli\u003eRear wheel includes a sprocket carrier — note that the original rear sprocket does not fit and a compatible aftermarket unit is required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards, ensuring long-term reliability under sustained road and racing loads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eThe Piega's forged aluminium construction is what sets it apart from cast alternatives. Forging aligns the grain structure of the aluminium, producing a wheel that is measurably stiffer and more resistant to fatigue cracking under the lateral loads generated in hard cornering. OZ's racing pedigree is embedded in every manufacturing step: the same facility and processes that supply professional Superbike teams are applied to each set that leaves the Italian factory.\u003c\/p\u003e\u003cp\u003eThe five-spoke geometry is not simply an aesthetic choice — it is the result of extensive finite element analysis carried out by the OZ SBK Racing department to optimise stiffness-to-weight ratio while allowing adequate airflow to the brake components. The reduction in unsprung and rotating mass sharpens the ZX-10 R's already-responsive character, making direction changes feel more immediate and reducing the gyroscopic resistance that heavier wheels impose on steering.\u003c\/p\u003e\u003ch2\u003eRoad and Track Performance\u003c\/h2\u003e\u003cp\u003eOn the road, the Piega set improves everyday rideability: acceleration feels more eager, braking distances benefit from the reduced inertia, and mid-corner adjustments demand less physical effort. On track, where milliseconds matter, the weight saving at the wheel translates into genuinely measurable lap time improvements. The wheels are fully road-legal and equally at home on a trackday or a Sunday morning run.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set has been specifically engineered for the Kawasaki ZX-10 R produced between 2016 and 2020. The wheels bolt on as direct replacements for the original equipment rims without modification to the swingarm, forks or brake system. A compatible aftermarket rear sprocket must be sourced separately, as the OEM sprocket is not compatible with the Piega sprocket carrier included in this set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3184KA35 (front) + P6125KA60 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R (2016–2020)\u003c\/li\u003e\n\u003cli\u003eIncluded: premium bearings, aluminium angle valves, spacers (where required), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404089610,"sku":"P3184KA35+P6125KA60_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404122378,"sku":"P3184KA35+P6125KA60_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167404155146,"sku":"P3184KA35+P6125KA60_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_8a0f905d-7275-4666-b63e-96ed6738d8c8.png?v=1780797081"},{"product_id":"oz-piega-aluminium-set-kawasaki-zx-10-r","title":"OZ Piega Forged Aluminium Wheel Set Kawasaki ZX-10 R (2021-2026)","description":"\u003cp\u003eBorn in OZ's SBK racing division, the Piega forged aluminium wheel set for the Kawasaki ZX-10 R (2021-2026) delivers a measurable reduction in rotating mass that transforms corner entry, mid-corner agility and drive-exit response — whether you are chasing lap times on track or exploiting every kilometre of a mountain road.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design engineered by OZ's Superbike racing department for maximum stiffness-to-weight ratio.\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating unsprung mass, sharpening steering response and improving stability at high speed.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: one front wheel and one rear wheel supplied together.\u003c\/li\u003e\n\u003cli\u003eIncludes high-quality bearings, aluminium angled valves and spacers where required, plus a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on replacement for the factory wheels of the Kawasaki ZX-10 R (2021-2026); no modifications required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards for long-term reliability in both road and racing conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing Pedigree, Road-Legal Execution\u003c\/h2\u003e\u003cp\u003eThe Piega range sits at the intersection of OZ's motorsport heritage and everyday usability. The five-spoke architecture is not purely aesthetic — each spoke profile is shaped to handle the asymmetric loading generated under hard braking and aggressive corner entry, conditions that a production superbike like the ZX-10 R is engineered to exploit. The forging process aligns the aluminium grain structure for greater fatigue resistance compared with cast alternatives, which matters over the course of a track day season or a high-mileage road career.\u003c\/p\u003e\u003ch2\u003eReduced Rotating Mass — Why It Matters\u003c\/h2\u003e\u003cp\u003eRotating unsprung mass is one of the most effective variables a rider can optimise without touching the engine or suspension. Lighter wheels respond faster to steering inputs, follow road or track surface irregularities more faithfully, and place less gyroscopic resistance against direction changes. The result is a ZX-10 R that feels more connected and easier to place precisely — advantages that compound with every corner of a circuit lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is developed specifically for the Kawasaki ZX-10 R covering model years 2021 through 2026. It replaces the original factory wheels on a direct fit basis. The included sprocket carrier is required because the stock rear sprocket is not compatible with the Piega hub. Spacers are supplied and fitted only where necessary for correct axle alignment.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eConstruction: Forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: 5-spoke\u003c\/li\u003e\n\u003cli\u003eContents: 1x front wheel, 1x rear wheel\u003c\/li\u003e\n\u003cli\u003eIncluded items: Bearings, aluminium angled valves, spacers (as required), sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: Kawasaki ZX-10 R (2021-2026)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: Road and track\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404187914,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404220682,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167404253450,"sku":null,"price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_4a315846-ac25-4ddf-8ab4-763dc3b36779.png?v=1780797085"},{"product_id":"oz-piega-aluminium-set-mv-agusta-f3","title":"OZ Piega Forged Aluminium Wheel Set for MV Agusta F3 675\/800 (2012-2026)","description":"\u003cp\u003eBuilt by OZ's renowned SBK Racing division, the Piega wheel set brings race-proven engineering to every MV Agusta F3 675\/800 rider. Forged from premium aluminium using the same processes trusted in world-level competition, these wheels meet the exacting safety and structural standards that serious road and track use demands — giving you the confidence to push harder on every corner exit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction developed by OZ's SBK Racing department for maximum structural integrity and long-term reliability.\u003c\/li\u003e\n\u003cli\u003eFive-spoke Piega design dramatically reduces rotating mass, sharpening steering response and improving agility under braking and acceleration.\u003c\/li\u003e\n\u003cli\u003eDirect, drop-in replacement for the OEM wheels on the MV Agusta F3 675\/800 across the full 2012–2026 production run.\u003c\/li\u003e\n\u003cli\u003eComplete set includes a front wheel (3.50 x 17) and a rear wheel (5.50 x 17) for a straightforward, matched upgrade.\u003c\/li\u003e\n\u003cli\u003eShips with durable bearings, aluminium angled valves, and spacers where required, plus a sprocket carrier — note that the original sprocket does not fit and a new one is required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's highest manufacturing standards for proven durability and consistent performance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Developed Engineering for Road and Track\u003c\/h2\u003e\u003cp\u003eThe Piega family has its roots firmly in motorsport. OZ's SBK Racing engineers designed the five-spoke geometry to satisfy the unforgiving structural demands of superbike competition, then refined it for the real-world conditions a road rider encounters daily. The result is a wheel that does not compromise: stiff enough for precise high-speed stability, light enough to transform how the F3 675\/800 changes direction.\u003c\/p\u003e\u003cp\u003eReducing rotating mass is one of the most effective ways to improve a motorcycle's handling, and the Piega's forged aluminium achieves this without sacrificing the load-bearing strength the wheel must maintain at every lean angle. The five-spoke layout distributes stress evenly around the rim, contributing to the consistent feel that riders notice when pushing to the limit on track or threading through demanding road sections.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the MV Agusta F3 675 and F3 800 produced between 2012 and 2026. The wheels are a direct swap for the standard OEM units. Please note that the original rear sprocket is not compatible with the included sprocket carrier; a replacement sprocket suited to the new carrier must be fitted at the time of installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3117MV35 (front) + P6026MV55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel rim size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel rim size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eFitment: MV Agusta F3 675\/800, 2012–2026\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (where applicable), sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404384522,"sku":"P3117MV35+P6026MV55_sg","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404417290,"sku":"P3117MV35+P6026MV55_tb","price":2293.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167404450058,"sku":"P3117MV35+P6026MV55_tg","price":2293.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/MonoPiegaSetBlackGlossy_13cc9a91-22a4-4518-9f96-9b02b3184f7e.png?v=1780797092"},{"product_id":"oz-piega-aluminium-felgen-set-suzuki-gsx-r-1000","title":"OZ Piega Forged Aluminium Wheel Set for Suzuki GSX-R 1000 (2017-2023)","description":"\u003cp\u003eBorn from OZ's Superbike racing division, the Piega wheel set carries a heritage that stretches from World SBK pit lanes straight onto your GSX-R 1000. The five-spoke forged aluminium design is not merely aesthetic — every spoke line and cross-section is engineered to strip rotational mass, sharpen turn-in response, and raise the dynamic ceiling of Suzuki's flagship litre-bike whether you're threading traffic or attacking a circuit.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design developed by OZ's SBK racing department — a silhouette shaped by genuine motorsport demands, not marketing studios.\u003c\/li\u003e\n\u003cli\u003eForged from premium-grade aluminium for a superior strength-to-weight ratio over cast alternatives, delivering measurable reductions in unsprung and rotating mass.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 5.50 x 17 rear wheel — direct, hassle-free replacement for the OEM wheels.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angled valves and spacers (fitted where required), plus a rear sprocket carrier (note: the original rear sprocket is not compatible).\u003c\/li\u003e\n\u003cli\u003eOptimised for both road and track use, bringing improved agility, faster directional changes and enhanced high-speed stability.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting production standards, ensuring long-term reliability under demanding road and racing conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign, Finish and Racing Heritage\u003c\/h2\u003e\u003cp\u003eThe Piega line sits at the intersection of race-bred function and Italian industrial design. The clean five-spoke architecture gives the GSX-R 1000 a purposeful, stripped-back aesthetic that complements the bike's aggressive bodywork, while the anodised finish options — gloss black, techno black and techno gold — allow you to match the wheel character to your livery. Every surface treatment is applied after forging, meaning the alloy structure beneath remains uncompromised and the finish bonds to a dimensionally precise substrate.\u003c\/p\u003e\u003cp\u003eOZ's SBK racing heritage is not decorative. The Piega profile originated in a department tasked with finding fractions of a second on the world's most demanding circuits, and that discipline carries directly into the production item you receive. The part numbers for this set are P3052SU35 (front) and P6235SU60 (rear).\u003c\/p\u003e\u003ch2\u003ePerformance on Road and Track\u003c\/h2\u003e\u003cp\u003eReducing rotating mass is one of the highest-leverage modifications available to any motorcycle — the gains compound through acceleration, braking and mid-corner balance simultaneously. The Piega set's forged construction achieves this without sacrificing the structural integrity required for sustained track use. Riders moving from OEM cast wheels typically report noticeably sharper steering response and reduced effort in long, fast corners where gyroscopic forces otherwise resist direction changes.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is engineered specifically for the Suzuki GSX-R 1000 model years 2017 to 2023. It replaces the original wheels on a direct-fit basis. Please note that the original rear sprocket is not compatible with the supplied sprocket carrier; a replacement sprocket sized for the OZ carrier will be required.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003ePart numbers: P3052SU35 (front) + P6235SU60 (rear)\u003c\/li\u003e\n\u003cli\u003eFitment: Suzuki GSX-R 1000, 2017-2023\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404515594,"sku":"P3052SU35+P6235SU60_sg","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404548362,"sku":"P3052SU35+P6235SU60_tb","price":2485.44,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167404581130,"sku":"P3052SU35+P6235SU60_tg","price":2485.44,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_41f65ae3-3d6a-4c79-b123-a25a4bfd8fd7.png?v=1780797097"},{"product_id":"oz-piega-aluminium-set-yamaha-r6-03-16","title":"OZ Piega Forged Aluminium Wheel Set for Yamaha YZF-R6 (2003–2016)","description":"\u003cp\u003eBorn from OZ's SBK racing programme, the Piega forged aluminium wheel set transforms the everyday riding experience of the Yamaha YZF-R6 — whether you commute on it, tour on it, or take it to the track on weekends. The five-spoke Piega design reduces rotating mass meaningfully enough to sharpen steering response and lighten the feel through corners, yet the forged construction keeps the long-term durability you need for daily use.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke design developed by OZ's SBK Racing division — genuine motorsport engineering for road and track\u003c\/li\u003e\n\u003cli\u003eForged aluminium construction reduces rotating mass, improving agility and steering response without sacrificing structural rigidity\u003c\/li\u003e\n\u003cli\u003eComplete set: 1x front wheel (3.50 x 17) and 1x rear wheel (5.50 x 17) supplied together\u003c\/li\u003e\n\u003cli\u003eHigh-quality bearings, aluminium angled valves, and spacers (fitted where required) included in the set\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — note that the original rear sprocket is not compatible and a new sprocket will be required\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for the Yamaha YZF-R6 (2003–2016): no modifications needed to the motorcycle\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting quality standards for long-term reliability\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Value and Performance\u003c\/h2\u003e\u003cp\u003eThe Piega wheel set occupies a sweet spot that makes it appealing to riders who want a genuine upgrade without the trade-offs of a pure race product. Forged aluminium delivers the strength to handle daily road use — potholes, kerbs, and the occasional spirited commute — while the reduced unsprung and rotating weight pays dividends every time you tip into a bend. Steering feels more direct, the suspension works more effectively over imperfect surfaces, and the overall agility of the R6 takes a noticeable step forward.\u003c\/p\u003e\u003ch2\u003eTrack-Ready Construction\u003c\/h2\u003e\u003cp\u003eWhen the weekend arrives and the circuit calls, the Piega set is ready. OZ developed the five-spoke geometry in their SBK racing department specifically to balance stiffness under braking and cornering loads with the weight savings that matter at speed. The included angled aluminium valves make tyre pressure checks and adjustments easier in a pit-lane environment, and the complete bearing and spacer kit means initial fitment is straightforward without hunting for additional hardware.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct replacement for the factory wheels on the Yamaha YZF-R6 across the full 2003–2016 production run. No frame or suspension modifications are required. Please note that the original rear sprocket will not fit the supplied sprocket carrier; a new compatible rear sprocket must be sourced separately when fitting this set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: P3026YA35 (front) + P6032YA55 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eDesign: five-spoke Piega\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eFitment: Yamaha YZF-R6, 2003–2016\u003c\/li\u003e\n\u003cli\u003eIncluded: bearings, aluminium angled valves, spacers (as required), rear sprocket carrier\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404646666,"sku":"P3026YA35+P6032YA55_sg","price":2585.28,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404679434,"sku":"P3026YA35+P6032YA55_tb","price":2585.28,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167404712202,"sku":"P3026YA35+P6032YA55_tg","price":2585.28,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_fa7c07dc-95ea-4940-9c83-b48737b476eb.png?v=1780797098"},{"product_id":"oz-piega-aluminium-set-yamaha-r1","title":"OZ Piega Forged Aluminium Wheel Set – Yamaha YZF-R1\/M RN32, RN49 \u0026 RN65 (2015–2026)","description":"\u003cp\u003eEngineered to the same exacting standards that underpin OZ's SBK Racing programme, the Piega forged aluminium wheel set is a certified, road-legal upgrade for the Yamaha YZF-R1\/M across all RN32, RN49 and RN65 generations (2015–2026). Reducing rotational mass where it matters most, these wheels sharpen steering response, improve agility and deliver the kind of confidence at high speed that only a properly certified, race-developed component can provide.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke Piega design conceived by OZ's SBK Racing division — direct lineage from the world's most demanding superbike championships.\u003c\/li\u003e\n\u003cli\u003eForged from high-grade aluminium alloy, dramatically reducing unsprung and rotational mass for sharper turn-in and more precise mid-corner feel.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's world-renowned manufacturing standards, ensuring dimensional accuracy, reliability and long-term durability.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17), precision-matched for the R1\/M platform.\u003c\/li\u003e\n\u003cli\u003eSet supplied with high-quality bearings, aluminium angled valves and spacers where required, plus a sprocket carrier — note that the original rear sprocket is not compatible and a new sprocket must be sourced separately.\u003c\/li\u003e\n\u003cli\u003eDrop-in fitment: dimensionally identical to the OEM wheels, requiring no frame or swingarm modification.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRace-Developed, Road-Certified\u003c\/h2\u003e\u003cp\u003eThe Piega name carries genuine racing heritage. OZ developed this five-spoke geometry within their SBK Racing department, optimising spoke curvature and cross-section for the peak loads generated during hard braking and aggressive cornering at track speed. That same engineering discipline translates directly to road riding — every input from the rider is communicated more cleanly through a wheel that flexes less and weighs less than the standard item.\u003c\/p\u003e\u003cp\u003eManufacturing takes place entirely in Italy under OZ's rigorous quality control regime. Forging the aluminium rather than casting it aligns the grain structure of the metal, producing a wheel that is simultaneously lighter and stronger — a combination that no cast wheel of equivalent weight can match.\u003c\/p\u003e\u003ch2\u003eFinish \u0026amp; Presentation\u003c\/h2\u003e\u003cp\u003eAvailable in three anodised finishes — gloss black anodised, techno black anodised and techno gold anodised — each applied to the forged aluminium surface for lasting corrosion resistance and a premium appearance that holds up under track-day conditions. The anodising process bonds the colour into the metal rather than sitting on top of it, so the finish resists stone chips and brake-dust abrasion far better than a painted equivalent.\u003c\/p\u003e\u003ch2\u003eFitment \u0026amp; Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and tested specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eYamaha YZF-R1 RN32 (2015–2019)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN32 (2015–2019)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN49 (2020–2023)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN49 (2020–2023)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1 RN65 (2024–2026)\u003c\/li\u003e\n\u003cli\u003eYamaha YZF-R1M RN65 (2024–2026)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePart number: P3177YA35 (front) + P6209YA60 (rear). The OEM rear sprocket is not compatible; a suitable aftermarket sprocket must be fitted to the included sprocket carrier.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eBrand\u003c\/th\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003ctd\u003ePiega\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003ePart Number\u003c\/th\u003e\n\u003ctd\u003eP3177YA35 + P6209YA60\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eConstruction\u003c\/th\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSpoke design\u003c\/th\u003e\n\u003ctd\u003e5-spoke\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFront wheel size\u003c\/th\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRear wheel size\u003c\/th\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCountry of manufacture\u003c\/th\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFitment\u003c\/th\u003e\n\u003ctd\u003eYamaha YZF-R1\/M RN32, RN49 \u0026amp; RN65 (2015–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404843274,"sku":"P3177YA35+P6209YA60_sg","price":2585.28,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404876042,"sku":"P3177YA35+P6209YA60_tb","price":2585.28,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167404908810,"sku":"P3177YA35+P6209YA60_tg","price":2585.28,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_872e6f78-c1c6-4a8d-8281-79e36deaae0d.png?v=1780797104"},{"product_id":"oz-piega-aluminium-set-yamaha-r6-rj27","title":"OZ Piega Forged Aluminium Wheel Set – Yamaha YZF-R6 RJ27 (2017–2026)","description":"\u003cp\u003eThe OZ Piega wheel set brings genuine SBK-derived engineering to your Yamaha YZF-R6 RJ27 at a level you can appreciate every time you leave the garage. Forged from premium aluminium by OZ's SuperBike Racing division, the five-spoke Piega design reduces rotating mass in a meaningful, rider-felt way — sharpening steering response on the daily commute just as effectively as it does through the infield on track day.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eFive-spoke design developed by OZ's SBK Racing department, delivering reduced rotating mass for improved agility and more responsive handling in real-world riding conditions.\u003c\/li\u003e\n\u003cli\u003eHigh-grade forged aluminium construction balances lightweight performance with the structural rigidity needed for sustained road and track use.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) — everything needed to upgrade both ends in a single purchase.\u003c\/li\u003e\n\u003cli\u003eSupplied with quality bearings, aluminium angle valves and spacers (fitted where required), plus a sprocket carrier — note that the original rear sprocket is not compatible and a new sprocket will be needed.\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for the Yamaha YZF-R6 RJ27 (2017–2026); no modifications required to swap out the standard wheels.\u003c\/li\u003e\n\u003cli\u003eMade in Italy to OZ's exacting manufacturing standards, ensuring long-term reliability whether the bike sees daily roads or regular circuit sessions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability\u003c\/h2\u003e\u003cp\u003eUnlike race-only components that demand constant attention, the Piega set is engineered to perform faultlessly in ordinary riding conditions. The reduction in unsprung and rotating mass translates to less effort at the bar when threading through traffic, quicker direction changes on twisty roads, and a more settled feel under hard braking — benefits a rider notices from the very first ride, not just at the limit on a race circuit.\u003c\/p\u003e\u003ch2\u003eRoad and Track Performance\u003c\/h2\u003e\u003cp\u003eWhen the weekend calls for a track day, the Piega's motorsport lineage comes to the fore. Reduced gyroscopic effect from the lighter rotating assembly allows the R6 to tip into corners with noticeably less bar input, while greater structural stiffness compared to cast alternatives keeps tyre contact consistent under the sustained lateral and braking loads of circuit riding. The five-spoke architecture has been optimised specifically for the RJ27 generation, so the geometry and load paths are correct for the chassis rather than adapted from a generic design.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and verified for the following application:\u003c\/p\u003e\u003cul\u003e\u003cli\u003eYamaha YZF-R6 RJ27 — model years 2017 to 2026\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe wheels mount directly in place of the standard OEM wheels. Spacers are included and fitted only where the specific application requires them. A compatible aftermarket sprocket carrier is included; the original Yamaha rear sprocket will not fit and must be replaced when fitting this set.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eP3177YA35 (front) + P6247YA55 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConstruction\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e5.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eRoad and track\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003eYamaha YZF-R6 RJ27 (2017–2026)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCountry of manufacture\u003c\/td\u003e\n\u003ctd\u003eItaly\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Gloss Black Anodised","offer_id":53167404941578,"sku":"P3177YA35+P6247YA55_sg","price":2585.28,"currency_code":"EUR","in_stock":false},{"title":"Techno Black Anodised","offer_id":53167404974346,"sku":"P3177YA35+P6247YA55_tb","price":2585.28,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167405007114,"sku":"P3177YA35+P6247YA55_tg","price":2585.28,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaSetBlackGlossy_4c5b07ea-b958-4231-8cf0-4c46f55c7720.png?v=1780797105"},{"product_id":"oz-piega-r-aluminium-set-aprilia-rsv4-09-16","title":"OZ Piega R Forged Aluminium Wheel Set – Aprilia RSV4 \/ Factory \/ R \/ RR \/ RF (2009–2016)","description":"\u003cp\u003eEngineered in Italy by OZ's SBK Racing division, the Piega R wheel set represents the pinnacle of forged aluminium construction — lighter, stiffer, and more dynamically capable than the standard Piega, and built exclusively for track-focused Aprilia RSV4 riders who refuse to compromise on materials or performance.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers an exceptional strength-to-weight ratio, reducing rotational mass for sharper acceleration and more responsive direction changes.\u003c\/li\u003e\n\u003cli\u003eDeveloped directly by OZ's SBK Racing department — the same expertise behind championship-winning machinery transferred to your RSV4.\u003c\/li\u003e\n\u003cli\u003eComplete set includes a 3.50 x 17 front wheel and a 6.00 x 17 rear wheel, supplied with premium bearings, aluminium angle-stem valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eRear wheel includes a dedicated sprocket carrier — note that the original rear sprocket is not compatible and must be replaced accordingly.\u003c\/li\u003e\n\u003cli\u003eDirect bolt-on compatibility with the Aprilia RSV4, Factory, R, RR, and RF (2009–2016) — no modifications to the motorcycle required.\u003c\/li\u003e\n\u003cli\u003eMade in Italy: every wheel meets OZ's exacting manufacturing standards for surface finish, dimensional accuracy, and long-term durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eRacing Pedigree, Uncompromising Build Quality\u003c\/h2\u003e\u003cp\u003eThe Piega R is not a restyled road wheel — it is a racing wheel conceived from the outset for track use. The forging process aligns the grain structure of the aluminium, producing a wheel that is demonstrably stronger and lighter than cast equivalents of the same dimension. That reduction in unsprung and rotational mass translates directly into faster turn-in, improved mid-corner stability, and more exploitable corner-exit traction — advantages that are immediately felt the moment you tip the RSV4 into a braking zone.\u003c\/p\u003e\u003cp\u003eAvailable in an anodised techno black or anodised techno gold finish, both colourways are applied after machining to protect the aluminium surface and maintain the precision of the spoke profiles. The anodising is not a cosmetic afterthought: it provides a hard, corrosion-resistant layer that withstands the thermal and mechanical stresses of repeated track sessions.\u003c\/p\u003e\u003ch2\u003eTrack Use Notice\u003c\/h2\u003e\u003cp\u003eThe OZ Piega R wheel set is designed and homologated for track use only. It is not intended for road registration or road riding. Riders should ensure compliance with the regulations of their relevant racing series or track day organiser before fitting.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is a confirmed direct fitment for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 Factory (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 R (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2009–2016)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RF (2009–2016)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Numbers\u003c\/td\u003e\n\u003ctd\u003eR30663507 (front) + R60966007 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e6.00 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised (techno black or techno gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eFront wheel, rear wheel, bearings, aluminium angle-stem valves, spacers (where required), sprocket carrier\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405039882,"sku":"R30663507+R60966007_tb","price":2716.29,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167405072650,"sku":"R30663507+R60966007_tg","price":2716.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt.png?v=1780797106"},{"product_id":"oz-piega-r-aluminium-set-aprilia-rsv4-17-20","title":"OZ Piega R Forged Aluminium Wheel Set – Aprilia RSV4\/1100 Factory\/RF\/RR (2017–2020)","description":"\u003cp\u003eForged from premium aluminium in Italy and engineered exclusively for track use, the OZ Piega R wheel set represents the pinnacle of the renowned Piega lineage. Shedding rotational mass beyond what the standard Piega achieves, these five-spoke wheels transform the handling of the Aprilia RSV4\/1100 Factory, RF and RR into something sharper, faster and more responsive — lap after lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers the optimal balance of structural rigidity and reduced unsprung weight for serious track riding.\u003c\/li\u003e\n\u003cli\u003eReduced rotational mass produces noticeably quicker acceleration, sharper corner entry and improved stability under braking.\u003c\/li\u003e\n\u003cli\u003eClassic five-spoke Piega R design — lighter than the standard Piega model — available in anodised techno black or anodised techno gold finish.\u003c\/li\u003e\n\u003cli\u003eComplete front and rear set: 3.50 x 17 front wheel and 6.00 x 17 rear wheel, direct-fit replacements for the OEM Aprilia wheels.\u003c\/li\u003e\n\u003cli\u003ePremium inclusions as standard: quality bearings, aluminium angle valves, spacers (where required) and a sprocket carrier — note that the original rear sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eMade in Italy — OZ Racing's hallmark of precision manufacture and exceptional durability.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eBuild Quality and Materials\u003c\/h2\u003e\u003cp\u003eEvery Piega R wheel starts life as a solid block of aerospace-grade aluminium billet, forged under high pressure to align the grain structure of the metal for maximum fatigue resistance. The result is a wheel that is not merely light, but genuinely strong — capable of withstanding the repeated, high-load stress cycles that track riding demands. The anodised finish is applied after machining, creating a hard, chemically bonded surface layer that resists corrosion, abrasion and the heat generated in a demanding race environment far better than paint ever could.\u003c\/p\u003e\u003ch2\u003ePerformance on Track\u003c\/h2\u003e\u003cp\u003eThe Piega R series exists for one purpose: to make a motorcycle faster around a circuit. By cutting rotational inertia at both ends of the bike, these wheels allow the RSV4 engine's considerable power to translate into forward motion more efficiently. Steering inputs become crisper because the gyroscopic effect of heavy wheels is diminished, and the suspension can react more freely to surface changes when the wheels themselves are lighter. For riders chasing consistent lap times, the difference between the Piega R and a heavier OEM wheel is felt immediately — not only in outright acceleration, but in the confidence with which the bike can be pushed to its limits.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed as a direct, like-for-like replacement for the factory wheels fitted to the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 RF (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR (2017–2020)\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory (2017–2020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePlease note: the sprocket carrier included in the set is not compatible with the original Aprilia rear sprocket. A replacement sprocket suitable for the OZ carrier must be fitted.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eAttribute\u003c\/th\u003e\n\u003cth\u003eDetail\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eOZ Racing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003ePiega R\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eForged aluminium\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront wheel size\u003c\/td\u003e\n\u003ctd\u003e3.50 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear wheel size\u003c\/td\u003e\n\u003ctd\u003e6.00 x 17\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eAnodised (techno black or techno gold)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart numbers\u003c\/td\u003e\n\u003ctd\u003eR30663507 (front) + R60966007 (rear)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIntended use\u003c\/td\u003e\n\u003ctd\u003eTrack only\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOrigin\u003c\/td\u003e\n\u003ctd\u003eMade in Italy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405138186,"sku":"R30663507+R60966007_tb","price":2716.29,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167405170954,"sku":"R30663507+R60966007_tg","price":2716.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_b5a552f1-568a-482e-926c-bf17263aa4b3.png?v=1780797108"},{"product_id":"oz-piega-r-aluminium-set-aprilia-rsv4-21","title":"OZ Piega R Forged Aluminium Wheel Set for Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026)","description":"\u003cp\u003eBorn from OZ's decades of motorsport heritage and hand-finished in Italy, the Piega R wheel set brings genuine race-bred design to the Aprilia RSV4 platform. The signature five-spoke architecture is not merely aesthetic — it is the result of rigorous track engineering to cut rotating mass to a minimum, transforming the way the RSV4 responds to rider input in every corner.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction delivers maximum structural rigidity with a dramatically reduced overall weight compared to cast alternatives.\u003c\/li\u003e\n\u003cli\u003eReduced rotating mass sharpens acceleration response, improves braking feel and makes direction changes noticeably more precise on circuit.\u003c\/li\u003e\n\u003cli\u003eLighter than the standard OZ Piega, the Piega R is the dedicated track-day variant engineered for riders who demand more from every session.\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (6.00 x 17) — everything you need in a single box.\u003c\/li\u003e\n\u003cli\u003eSupplied with premium durable bearings, aluminium angle valves and spacers (fitted where required), plus a sprocket carrier — note that the original Aprilia sprocket is not compatible and must be replaced.\u003c\/li\u003e\n\u003cli\u003eDirect-fit compatibility with the Aprilia RSV4 \/ RR \/ 1100 Factory (2021–2026) means no fabrication or modification is needed at the hub.\u003c\/li\u003e\n\u003cli\u003eMade in Italy — every wheel is manufactured and finished to the exacting standards OZ has upheld since their founding in motorsport.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eDesign and Finish\u003c\/h2\u003e\u003cp\u003eThe Piega R is offered in two anodised finishes that complement the RSV4's aggressive Italian styling. Techno Black anodised gives the wheel a deep, understated presence that pairs with virtually every livery, while Techno Gold anodised references OZ's storied racing history and adds a bold visual signature that stands out in the pit lane and on the podium alike. Both finishes are applied through a hard-anodising process that resists corrosion, abrasion and the thermal cycling inherent to track use — so the wheels look as sharp after a full season as they did on day one.\u003c\/p\u003e\u003ch2\u003eTrack Performance\u003c\/h2\u003e\u003cp\u003eReducing unsprung and rotating mass is one of the highest-value modifications available to any track rider. Less rotating inertia means the engine spends less energy accelerating the wheel itself, translating directly into crisper throttle response and more linear deceleration under braking. The Piega R's five-spoke profile achieves this without compromising the stiffness the RSV4's suspension geometry demands, keeping tyre contact consistent and feedback accurate lap after lap.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed and homologated specifically for the following models:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eAprilia RSV4 — 2021 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 RR — 2021 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 — 2021 to 2026\u003c\/li\u003e\n\u003cli\u003eAprilia RSV4 1100 Factory — 2021 to 2026\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eImportant: the original Aprilia rear sprocket is not compatible with the supplied sprocket carrier. A replacement sprocket must be fitted during installation.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R30663507 (front) + R60966007 (rear)\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 6.00 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eSpoke design: five-spoke\u003c\/li\u003e\n\u003cli\u003eFinish options: techno black anodised \/ techno gold anodised\u003c\/li\u003e\n\u003cli\u003eOrigin: Made in Italy\u003c\/li\u003e\n\u003cli\u003eIntended use: track \/ race circuit\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405629706,"sku":"R30663507+R60966007_tb","price":2716.29,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167405662474,"sku":"R30663507+R60966007_tg","price":2716.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_5d3f3e77-a246-4a3f-a478-79470f15765c.png?v=1780797114"},{"product_id":"oz-piega-r-aluminium-felgen-set-bmw-s1000rr-k46","title":"OZ Piega R Aluminium Wheel Set BMW S1000RR K46 (2009-2018)","description":"\u003cp\u003eUpgrade the BMW S1000RR K46 (2009-2018) with a wheel set that delivers genuine, measurable gains on every ride. The OZ Piega R forged aluminium wheel set cuts rotational mass compared to the stock cast wheels, translating directly into sharper turn-in, more responsive braking and a livelier feel at both road and track pace — all backed by Italian precision manufacturing that OZ has refined over decades of motorsport.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eForged aluminium construction reduces rotational mass over standard cast wheels, improving acceleration, braking and handling response\u003c\/li\u003e\n\u003cli\u003eComplete set includes one front wheel (3.50 x 17) and one rear wheel (5.50 x 17) — everything needed for a straightforward swap\u003c\/li\u003e\n\u003cli\u003eHigh-quality bearings, aluminium angle valves and spacers (where required) supplied in the box\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included, as the original carrier cannot be reused with these wheels\u003c\/li\u003e\n\u003cli\u003eAvailable in Techno Black anodised or Techno Gold anodised — both finishes suited to a wide range of S1000RR liveries\u003c\/li\u003e\n\u003cli\u003eDirect OEM replacement fitment for K46 models equipped with cast wheels (2009-2018)\u003c\/li\u003e\n\u003cli\u003eMade in Italy — part numbers R30673507 (front) and R60976007 (rear)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eEveryday Usability and Long-Term Value\u003c\/h2\u003e\u003cp\u003eUnlike dedicated carbon fibre race wheels that demand constant inspection and careful daily handling, the Piega R's forged aluminium structure is robust enough for regular road miles as well as track days. The weight saving over the factory cast wheels is meaningful without the cost or fragility of exotic materials, making this set a practical long-term investment for riders who want a genuine performance upgrade without compromising day-to-day convenience.\u003c\/p\u003e\u003cp\u003eFitting is uncomplicated: the Piega R set is engineered specifically for the K46 chassis, so wheel fitment, brake disc spacing and chain alignment are correct from the outset. The included sprocket carrier removes the guesswork from rear-end assembly, and the supplied bearings and valves mean no last-minute trips to source ancillaries.\u003c\/p\u003e\u003ch2\u003eBuild Quality and Finish\u003c\/h2\u003e\u003cp\u003eEach wheel is forged and machined at OZ's facility in Italy, a process that aligns the aluminium grain structure for maximum strength at minimum weight. The Techno Black and Techno Gold anodised finishes are applied to the alloy surface itself, not a painted coating, so the colour is durable and resistant to the scuffs and stone chips that come with hard riding. Both colourways are a direct nod to OZ's motorsport heritage and look purposeful alongside the angular bodywork of the K46 generation S1000RR.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is designed exclusively for the BMW S1000RR K46 produced between 2009 and 2018. It is compatible only with models originally equipped with cast wheels. If your machine left the factory with forged or carbon wheels, please verify fitment before ordering. The sprocket carrier supplied in the set is mandatory — the original BMW rear sprocket carrier must not be reused.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eBrand: OZ\u003c\/li\u003e\n\u003cli\u003eModel: Piega R\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFront wheel size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear wheel size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K46 (2009-2018), cast-wheel models\u003c\/li\u003e\n\u003cli\u003ePart numbers: R30673507 (front) + R60976007 (rear)\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405826314,"sku":"R30673507+R60976007_tb","price":2716.29,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167405859082,"sku":"R30673507+R60976007_tg","price":2716.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_acca122c-1983-4923-8818-7cfe8ea56744.png?v=1780797119"},{"product_id":"oz-piega-r-aluminium-felgen-set-bmw-s1000rr-k67-mit-m","title":"OZ Piega R Aluminium Wheel Set BMW S1000RR K67 with M Package Hub (2019-2026)","description":"\u003cp\u003eEngineered for riders who demand every advantage on circuit, the OZ Piega R aluminium wheel set is purpose-built for the BMW S1000RR K67 fitted with the M Package hub. Forged from premium aluminium using advanced lightweight construction, these wheels shed rotating mass with precision Italian craftsmanship — translating directly into sharper turn-in, improved acceleration, and enhanced grip lap after lap.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eLightweight forged aluminium construction reduces rotating mass compared to standard Piega models, delivering noticeably quicker steering and stronger acceleration out of corners.\u003c\/li\u003e\n\u003cli\u003eTrack-optimised design developed specifically to handle the extreme loads of circuit riding, making the Piega R the natural choice for performance-focused S1000RR owners.\u003c\/li\u003e\n\u003cli\u003eComplete wheel set: includes one front wheel rim (3.50 x 17) and one rear wheel rim (5.50 x 17), supplied with high-quality bearings, aluminium angle valves, and spacers where required.\u003c\/li\u003e\n\u003cli\u003eRear sprocket carrier included — necessary because the original M Package carrier is not compatible with the Piega R rear wheel.\u003c\/li\u003e\n\u003cli\u003eAvailable in two anodised finishes — Techno Black and Techno Gold — for a purposeful, race-bred aesthetic that sets the S1000RR apart in the paddock or on the road.\u003c\/li\u003e\n\u003cli\u003eExclusive M Package fitment: designed specifically for the BMW S1000RR K67 (2019-2026) equipped with the M Package forged or carbon wheel hub, offering a direct OEM-equivalent exchange.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eItalian Precision, Track-Proven Performance\u003c\/h2\u003e\u003cp\u003eMade in Italy, the Piega R is the product of OZ's decades of motorsport heritage. Every wheel is forged — not cast — from high-grade aluminium, ensuring an exceptional strength-to-weight ratio that cast alternatives simply cannot match. The result is a wheel that responds to rider inputs with an immediacy that is immediately apparent from the first session out of the pit lane.\u003c\/p\u003e\u003cp\u003eThe reduced unsprung and rotating mass also allows the S1000RR's suspension to work more effectively, keeping the tyre in contact with the track surface through the roughest of corners. Whether you are chasing personal bests at a track day or competing in a club championship, the Piega R gives you a measurable, tangible edge.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThis wheel set is exclusively compatible with the BMW S1000RR K67 (2019-2026) fitted with the M Package (models originally equipped with OZ forged aluminium or carbon fibre wheels from the factory). It is a direct replacement for the OEM M Package wheels and is not suitable for standard S1000RR models without the M hub specification.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart numbers: R32323507 + R2706007\u003c\/li\u003e\n\u003cli\u003eFront rim size: 3.50 x 17\u003c\/li\u003e\n\u003cli\u003eRear rim size: 5.50 x 17\u003c\/li\u003e\n\u003cli\u003eMaterial: forged aluminium\u003c\/li\u003e\n\u003cli\u003eFinish: anodised (Techno Black or Techno Gold)\u003c\/li\u003e\n\u003cli\u003eIncludes: bearings, aluminium angle valves, spacers (where required), rear sprocket carrier\u003c\/li\u003e\n\u003cli\u003eFitment: BMW S1000RR K67 (2019-2026) with M Package hub\u003c\/li\u003e\n\u003cli\u003eCountry of manufacture: Italy\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OZ","offers":[{"title":"Techno Black Anodised","offer_id":53167405891850,"sku":"R32323507+R2706007_tb","price":2716.29,"currency_code":"EUR","in_stock":false},{"title":"Techno Gold Anodised","offer_id":53167405924618,"sku":"R32323507+R2706007_tg","price":2716.29,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/PiegaRSetBlackMatt_b1272379-9977-4fe0-95bc-964b985bd470.png?v=1780797122"}],"url":"https:\/\/inter-pace.com\/en-rw\/collections\/wheels.oembed","provider":"Inter-Pace","version":"1.0","type":"link"}