{"product_id":"zcoo-ex-front-brake-pads-ducati-supersport-939-s","title":"ZCOO EX Race Front Brake Pads Ducati SUPERSPORT 939 S (2017-2020) - Z-B007-EX","description":"\u003cp\u003eUpright, unfaired and quick: the Ducati SUPERSPORT 939 S loads its front end in a way a fairing would soften. Here the shape is the B007, drawn for the Brembo caliper and measuring 85.0 by 51.0 mm. On the SUPERSPORT 939 S that shape comes in EX Race, the mixture ZCOO sells for road, trackday and club racing rather than for sprint distance alone.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eMachined, not moulded: the B007 plate is cut to the Brembo outline rather than pressed to an approximate one\u003c\/li\u003e\n\u003cli\u003eFade-free past 600 degrees Celsius, the range a hard-worked SUPERSPORT 939 S front end reaches\u003c\/li\u003e\n\u003cli\u003eEven pressure distribution across the 85.0 by 51.0 mm face from new to the wear limit\u003c\/li\u003e\n\u003cli\u003eConsistent friction from the first lap to the wear limit, so the braking marker set on a cold SUPERSPORT 939 S still means the same thing when it is hot\u003c\/li\u003e\n\u003cli\u003eQuiet in normal use and low on dust, so the SUPERSPORT 939 S does not pay for its brakes in wheel cleaning\u003c\/li\u003e\n\u003cli\u003eThe B007 is one of 16 shapes ZCOO builds; this is the one your Brembo caliper takes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eConstruction on the B007 follows ZCOO's racing practice throughout. The friction layer of the B007 is bonded by a joining process Okada Corporation developed against the failure that ends most sintered pads. The effect is a B007 that presents the same geometry to the disc near the wear limit as it did new.\u003c\/p\u003e\u003ch2\u003ePerformance and Feel\u003c\/h2\u003e\u003cp\u003eEX Race trades a little initial aggression for a friction level that does not move on the Ducati SUPERSPORT 939 S. The compound lays a thin ceramic film on the rotor as it beds, which is why the Ducati SUPERSPORT 939 S sees far less disc wear than a conventional sinter would cause. For an SUPERSPORT 939 S that is the difference between a hard stop and a fright.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eFor the Ducati SUPERSPORT 939 S, 2017 to 2020, on the Brembo fitment. Before ordering, check that your caliper takes a pad of 85.0 mm length and 51.0 mm height. The B007 is a front pad only. The same B007 shape covers 111 further machines in the 2026 catalogue.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo ECE R90 type approval is documented for this pad. It appears neither in ZCOO's own catalogue nor on the European distributor's site, and no approval number is printed on the packaging data available to us. ZCOO itself describes the compound as suited to competition machines and road machines alike, but that is a description of the mixture, not a type approval. Until the distributor confirms an approval in writing, treat this as a track and competition part: in Germany a replacement brake pad without ECE R90 approval may not be fitted to a motorcycle used on public roads. Ask us before ordering if you need this clarified for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z-B007-EX (EAN 4950545750334)\u003c\/li\u003e\n\u003cli\u003ePad code: ZRM-B007C\u003c\/li\u003e\n\u003cli\u003eCompound: ZCOO EX Race - ceramic-sintered\u003c\/li\u003e\n\u003cli\u003ePad dimensions: 85.0 x 51.0 x 8.0 mm (L x H x thickness)\u003c\/li\u003e\n\u003cli\u003eCaliper family: Brembo\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle only\u003c\/li\u003e\n\u003cli\u003eFitment: Ducati SUPERSPORT 939 S, 2017-2020\u003c\/li\u003e\n\u003cli\u003eContents per pack: 1 set = 2 pads for one caliper; a machine with twin front discs needs two packs\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ECE R90 type approval documented - track and competition use\u003c\/li\u003e\n\u003cli\u003eManufacturer: Okada Corporation, Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZCOO","offers":[{"title":"Default Title","offer_id":53637877694730,"sku":"Z-B007-EX","price":294.0,"currency_code":"QAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/B007-produkt_ef607db6-2ac4-4cd5-a42d-0866d66385b1.png?v=1788776847","url":"https:\/\/inter-pace.com\/en-qa\/products\/zcoo-ex-front-brake-pads-ducati-supersport-939-s","provider":"Inter-Pace","version":"1.0","type":"link"}