{"product_id":"ohlins-shock-spring-115-n-mm-230-mm-57-mm-60011-41","title":"Öhlins Shock Spring 115 N\/mm \/ 230 mm \/ Ø 57 mm – 60011-41","description":"\u003cp\u003eÖhlins part number 60011-41 is a shock absorber spring rated at 115 N\/mm, 230 mm long with a 57 mm inner diameter. Adding a pillion or luggage changes the load enough that the standard rate stops working.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eÖhlins part number 60011-41\u003c\/li\u003e\n\u003cli\u003eMeasured spring rate 115 N\/mm\u003c\/li\u003e\n\u003cli\u003eStraight-wound, constant rate\u003c\/li\u003e\n\u003cli\u003eFree length 230 mm\u003c\/li\u003e\n\u003cli\u003e100 mm of usable stroke\u003c\/li\u003e\n\u003cli\u003eInner diameter 57 mm\u003c\/li\u003e\n\u003cli\u003ePowder-coated yellow\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eWhy the Rate Holds\u003c\/h2\u003e\u003cp\u003eEach spring is set before it is measured, so it will not settle and lose rate in service. Every unit is dyno-tested against the curve held for its part number, not sampled from a batch. The Öhlins part number is stamped on the unit, so its specification can be looked up years later.\u003c\/p\u003e\u003ch2\u003eDimensions\u003c\/h2\u003e\u003cp\u003eFree length 230 mm, inner diameter 57 mm, rate 115 N\/mm — those three figures define the part completely.\u003c\/p\u003e\u003ch2\u003eWhat This Rate Does\u003c\/h2\u003e\u003cp\u003eFirm rates trade some small-bump comfort for support — the right trade on a good surface at speed. Support under braking improves; small-bump comfort gives a little back. If the suspension bottoms out or the geometry collapses under load, this is the direction to go. Ride quality on the road is decided by rate first and damping second.\u003c\/p\u003e\u003ch2\u003eHow a Rear Spring Works\u003c\/h2\u003e\u003cp\u003eTwo riders 20 kg apart on the same motorcycle genuinely need different rates, not different clicks. The rear spring carries the rider, the pillion and the luggage; the front carries only part of it. Öhlins sells rear springs separately precisely because rider weight varies more than machine weight does.\u003c\/p\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThis spring is chosen by its dimensions rather than by motorcycle model: check inner diameter, free length and rate against the fork it is going into. Where Öhlins lists this size against a particular unit, the listing is a starting point rather than a boundary. The safest way to choose is by static sag: set the target figure, and the rate follows from whether you can reach it with preload.\u003c\/p\u003e\u003ch2\u003eWhat Fitting Involves\u003c\/h2\u003e\u003cp\u003eCheck the free length against the old springs before fitting — a sagged original often measures short. Rate and preload are separate adjustments: get the rate right first, then set sag with preload. The fork legs come off, the springs are swapped and the oil level is reset — half a day in most workshops.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eRoad approval: springs are not separately type-approved in Germany because they substitute a part that is already homologated with the fork. Model-specific documents, where they exist, are named above.\u003c\/p\u003e\u003ch2\u003eFitting and Setup Service\u003c\/h2\u003e\u003cp\u003eFitting matters as much as the part. We are an authorised Öhlins service centre and carry out installation, servicing and setup ourselves — get in touch and we will arrange it alongside your order.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cem\u003eBrand:\u003c\/em\u003e Öhlins\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePart Number:\u003c\/em\u003e 60011-41\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSpring Rate:\u003c\/em\u003e 115 N\/mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFree Length:\u003c\/em\u003e 230 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eInner Diameter:\u003c\/em\u003e 57 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eStroke:\u003c\/em\u003e 100 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eConstruction:\u003c\/em\u003e Straight\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFinish:\u003c\/em\u003e Powder-coated yellow\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCountry of Origin:\u003c\/em\u003e Sweden\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Öhlins","offers":[{"title":"Default Title","offer_id":53645416202506,"sku":"60011-41","price":509.0,"currency_code":"QAR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/RearOhlinsSpring_6f8156b0-c965-4fdd-bb2b-f6d25cbf96c0.png?v=1788866909","url":"https:\/\/inter-pace.com\/en-qa\/products\/ohlins-shock-spring-115-n-mm-230-mm-57-mm-60011-41","provider":"Inter-Pace","version":"1.0","type":"link"}