{"product_id":"zcoo-ex-front-brake-pads-triumph-speed-triple-1050-94","title":"ZCOO EX Race Front Brake Pads Triumph SPEED TRIPLE 1050 94 (2015-2016) - Z-B003-EX","description":"\u003cp\u003eOn an unfaired machine like the Triumph SPEED TRIPLE 1050 94 the rider's own body is part of the braking load. For the Triumph SPEED TRIPLE 1050 94 of 2015 to 2016 that shape is the B003, a 35.2 by 40.5 mm face on a laser-cut backing plate. In the B003 the mixture is ceramic-sintered EX Race, mixed for a flat curve rather than a sharp first bite.\u003c\/p\u003e\u003ch2\u003eKey Features\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003eEX Race is the softer of ZCOO's two ceramic mixtures, chosen for feel on a machine like the SPEED TRIPLE 1050 94 rather than outright initial aggression\u003c\/li\u003e\n\u003cli\u003eForms a thin ceramic film on the rotor in use, so disc wear on the Triumph SPEED TRIPLE 1050 94 stays far below what a conventional sintered race pad causes\u003c\/li\u003e\n\u003cli\u003eSuits the SPEED TRIPLE 1050 94 on the road as readily as on a circuit, which is what separates the ceramic platform from a pure race sinter\u003c\/li\u003e\n\u003cli\u003eCeramic-sintered EX Race compound: on the SPEED TRIPLE 1050 94 the braking force rises in proportion to lever pressure instead of snapping in\u003c\/li\u003e\n\u003cli\u003eHeat spreads across the whole 35.2 by 40.5 mm face instead of concentrating at the leading edge\u003c\/li\u003e\n\u003cli\u003eThe B003 is made by Okada Corporation in Japan, the manufacturer behind ZCOO's endurance-racing programme\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eConstruction and Material Quality\u003c\/h2\u003e\u003cp\u003eZCOO builds the B003 the same way whether it ends up on an SPEED TRIPLE 1050 94 or on a race bike. Sintering fuses the ceramic to the plate, which is what lets the B003 hold together where an organic pad has begun to break down. Together they remove the two things that normally end a sintered pad, and the B003 is built against both: fade at the top of the range, and the friction layer lifting away.\u003c\/p\u003e\u003ch2\u003ePerformance and Feel\u003c\/h2\u003e\u003cp\u003eEX Race trades a little initial aggression for a friction level that does not move on the Triumph SPEED TRIPLE 1050 94. That band covers everything an SPEED TRIPLE 1050 94 meets, from a cold first stop to a long descent. With no fairing to lean into, the SPEED TRIPLE 1050 94 rider needs the B003 to be predictable above all.\u003c\/p\u003e\u003ch2\u003eFitment and Compatibility\u003c\/h2\u003e\u003cp\u003eThe B003 is ZCOO's listed reference for the Triumph SPEED TRIPLE 1050 94 between 2015 and 2016. The same B003 shape covers 9 further machines in the 2026 catalogue. Before ordering, check that your caliper takes a pad of 35.2 mm length and 40.5 mm height. Front axle exclusively - there is no rear B003.\u003c\/p\u003e\u003ch2\u003eRoad Approval\u003c\/h2\u003e\u003cp\u003eNo ECE R90 type approval is documented for this pad. It appears neither in ZCOO's own catalogue nor on the European distributor's site, and no approval number is printed on the packaging data available to us. ZCOO itself describes the compound as suited to competition machines and road machines alike, but that is a description of the mixture, not a type approval. Until the distributor confirms an approval in writing, treat this as a track and competition part: in Germany a replacement brake pad without ECE R90 approval may not be fitted to a motorcycle used on public roads. Ask us before ordering if you need this clarified for your machine.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003ePart number: Z-B003-EX (EAN 4950545750037)\u003c\/li\u003e\n\u003cli\u003ePad code: ZRM-B003C\u003c\/li\u003e\n\u003cli\u003eCompound: ZCOO EX Race - ceramic-sintered\u003c\/li\u003e\n\u003cli\u003ePad dimensions: 35.2 x 40.5 x 7.55 mm (L x H x thickness)\u003c\/li\u003e\n\u003cli\u003eCaliper family: Brembo\u003c\/li\u003e\n\u003cli\u003ePosition: Front axle only\u003c\/li\u003e\n\u003cli\u003eFitment: Triumph SPEED TRIPLE 1050 94, 2015-2016\u003c\/li\u003e\n\u003cli\u003eContents per pack: 1 set = 2 pads for one caliper; a machine with twin front discs needs two packs\u003c\/li\u003e\n\u003cli\u003eRoad approval: No ECE R90 type approval documented - track and competition use\u003c\/li\u003e\n\u003cli\u003eManufacturer: Okada Corporation, Japan\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZCOO","offers":[{"title":"Default Title","offer_id":53638635421962,"sku":"Z-B003-EX","price":525000.0,"currency_code":"PYG","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0949\/7831\/0410\/files\/B003-produkt_8c603e49-b3f7-4b12-a4d6-78253a1333f2.png?v=1788780058","url":"https:\/\/inter-pace.com\/en-py\/products\/zcoo-ex-front-brake-pads-triumph-speed-triple-1050-94","provider":"Inter-Pace","version":"1.0","type":"link"}